Digi | DC-100 | Digi Connect ME 9210 - Product Brief

Digi Connect ME®
9210 Family
Compact and powerful wired and wireless embedded modules
Ultra-compact high-performance embedded modules for
M2M networking combine on-chip security and integrated
802.11b/g/n Wi-Fi or Ethernet networking.
Block Diagram
The Digi Connect ME 9210 family features the development and
operational benefits of the iDigi® Device Cloud™. This secure,
highly-scalable platform seamlessly ties enterprise applications
and remote devices together. Using iDigi Manager Pro™,
customers can also easily configure, upgrade, monitor and
troubleshoot their devices from a centralized location.
Digi Connect Wi-ME 9210
RJ-45
w/integrated
Magnetics
RP-SMA
Antenna
Connector
PHY
8 MB
Flash
16 MB
SDRAM
SPI
DRPIC165X FIM
Mem
Ctrlr
Power
Mgmt
SPI
I2C
ARM
ARM926EJ-S
75 MHz
UART
802.11bgn
Wi-Fi
Radio
JTAG
These modules can provide future application-specific interface
options through the programmable Flexible Interface Module
(FIM), while keeping the main serial port or other key peripheral
interfaces available. They are well-suited for more advanced
core module applications by supporting up to ten shared GPIOs,
external IRQs and an extended set of peripheral interface options.
Digi Connect ME 9210
AES
Accelerator
The Digi Connect ME 9210 family of embedded modules enables
secure wired and wireless networking. Built on Digi’s powerful
NS9210 ARM9 processor, these high-performance modules
allow customers to implement next generation network-enabled
products. Additionally, their RJ-45 form factor is pin compatible
with modules in the Digi Connect ME family.
10/100
Ethernet
MAC
Overview
GPIO
SPI
20-Pin
Connector
UART
JTAG Connector
Features/Benefits
Platforms and Services
• Secure 802.11b/g/n Wi-Fi support
• Integrated 10/100 Mbit Ethernet interface
• Support for Digi Embedded Linux and Digi NET+OS
• Industrial operating temperature System-on-Module
• RJ-45 form factor compatible with Digi Connect ME
Design Services
Accessory Kits
NET OS
Support
• On-chip hardware encryption engine
• Extended set of on-chip interfaces and signals
• Power management modes
• Low-emission design (FCC Class B)
Supported Software Platforms
• Seamless migration to NET+ARM chip design
www.digi.com
Development Kits
Digi JumpStart Kits® Overview
Digi JumpStart Kit® for NET+OS
Digi JumpStart Kit® for Embedded Linux
This royalty-free turnkey solution for embedded software development is
based on the ThreadX Real-Time Operating System (RTOS), one of the most
reliable and field-proven RTOS solutions available. In addition to ThreadX,
NET+OS provides the integrated building blocks needed to create product
solutions with leading network security using Digi embedded modules and
microprocessors.
For professional NET+OS software development, the Eclipse based Digi ESP™
Integrated Development Environment (IDE) with graphical user interface
and high-speed USB 2.0 hardware debugger is provided out-of-the-box.
•
•
•
•
Royalty-free turnkey solution for embedded software development
Built on field-proven and compact ThreadX RTOS
Fully integrated support for secure, IPv4/IPv6 networking applications
Professional software development using Windows-based Digi ESP IDE
Built around a standard Linux 2.6 kernel distribution, the Digi JumpStart Kit for
Embedded Linux is tailored to the specific needs of embedded Linux development and
provides an easy-to-use, complete off-the-shelf embedded development platform. It
includes all components that are required to build secure network-enabled products
based on the Digi Connect ME 9210 family.
The kit includes Digi ESP™ for Embedded Linux, a powerful and fully Linux-hosted
Integrated Development Environment based on the open Eclipse™ framework. Ideal for
new and experienced Linux developers, Digi ESP improves software design productivity
by accelerating and greatly simplifying driver and application development through a
user-friendly graphical interface.
•
•
•
•
Off-the-shelf development platform for network-enabled embedded systems
Royalty-free and with optimized 2.6 kernel and services support
Linux Digi ESP IDE for accelerated software development
Full Linux and Digi BSP source code included
Digi Connect ME kits shown
Digi JumpStart Kits® Contents
Software Platform
NET+OS
Module
Digi Connect ME 9210 or Digi Connect Wi-ME 9210 w/ 8 MB Flash, 16 MB SDRAM
Development Board
CD/DVD
Documentation
Power Supplies and Accessories
Other
Embedded Linux
1 RS-232 serial port, GPIO configuration switches, screw terminal for GPIO signals, prototyping area, status LEDs
(serial, GPIO, power), logic signal header, test points, reset button, user/wake-up buttons, PoE module header,
9-30VDC power supply, JTAG header and RS-232 console/debug port for JTAG-equipped modules
Digi NET+OS CD:
NET+OS 7, Digi ESP IDE, BSP source code, sample code, Green
Hills MULTI IDE support files, user documentation
Digi Embedded Linux 4 DVD:
Digi Embedded Linux, Digi ESP IDE, Linux and platform specific
source code, Universal boot loader source code (U-Boot), sample
code, documentation
Quick start guide, Digi ESP tutorial, NET+OS porting guide,
NET+OS API documentation, Advanced Web Server, hardware
reference manual, development board schematics
Quick start guide, Digi Embedded Linux user’s guide, hardware
reference manual, development board schematics
External wall power supply (110/240VAC) with interchangeable outlet adapters
(North America, EU, UK, and Australia), crossover serial cable, Ethernet cable
Digi JTAG Link USB 2.0 hardware debugger
N/A
Kit Part Numbers
Ethernet Only
WLAN + Ethernet
DC-ME-9210-NET
DC-ME-9210-LX
DC-WME-9210-NET
DC-WME-9210-LX
Please refer to the feature specs on our website for detailed information about the specific software platform capabilities.
Specifications
Digi Connect ME® 9210
Digi Connect Wi-ME® 9210
Hardware
Processor Type
32-bit Digi NS9210 processor
ARM Core
ARM926EJ-S
Processor Speed
75 MHz
Cache
4k I/D Cache
Support up to 8 MB NOR Flash
Support up to 16 MB SDRAM
Memory Base Population
Flexible Interface Modules (FIMs)
300 MHz DRPIC165X CPU; 2k program/192 bytes data RAM
On-chip 256-bit AES Accelerator
Power Management Modes
Pins/Form Factor
High-Speed TTL Serial Interface
•
On-the-fly clock scaling; Low-power sleep modes; Configurable scaling/wake-up events (EIRQ, UART, Ethernet, etc.)
RJ-45 connector style with 20-pin micro pin header (Samtec FTS-110-01-F-DV-TR)
Full signal support (TXD, RXD, RTS, CTS, DTR, DSR and DCD); Hardware/Software flow control
GPIO
10 shared; Up to 3 external IRQ options
SPI
Master data rate up to 16.7 Mbps; Slave data rate up to 7.5 Mbps
I2C
v1.0 bus interface; 7-bit and 10-bit address modes
Flexible Interface Support (FIM)
UART, 1-Wire, USB device (low-speed), CAN BUS
Watchdog Timer (16-bit)
•
JTAG Interface
Available on development modules only
On-Board Power Supervisor
•
Wave-Solderable Design
No clean flux process
Dimensions (L x W x H)
1.445 in (36.7 mm) x 0.75 in (19.05 mm) x 0.735 in (18.67 mm)
Network Interface - Wired
Physical Layer
10/100Base-T
N/A
10/100 Mbps (auto-sensing)
N/A
Full- or half-duplex (auto-sensing)
N/A
RJ-45 w/ magnetics
N/A
802.3af compliant (Mid- and End-span)
N/A
Standard
N/A
IEEE 802.11b/g/n
Frequency
N/A
2.4 GHz
Data Rate
N/A
Up to 65 Mbps with automatic fallback
Modulation
N/A
CCK (11/5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps), OFDM (6,
9, 12, 18, 24, 48, 54 and 65 Mbps)
Typical Transmit Power
N/A
+17 dBm
Receive Sensitivity
N/A
-69 dBm @ 54 Mbps
Connector
N/A
1 x RP-SMA
WEP (Wired Equivalent Privacy)
N/A
64/128-bit encryption (RC4)
WPA/WPA2/802.11i
N/A
Data Rate
Mode
Connector
PoE Power Pass-Through
Network Interface – Wireless LAN
WLAN Security
128-bit TKIP/CCMP (AES) encryption. Enterprise mode (802.1X): LEAP (WEP only), PEAP, TTLS, TLS,
EAP-FAST, GTC, MD5, OTP, PAP, CHAP, MSCHAP, MSCHAPv2,
TTLS-MSCHAPv2. Pre-shared key mode (PSK/Personal).
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
Altitude
-40° C to +75° C (-40° F to +167° F) -40° C to +85° C (-40° F to +185° F) with external thermal pad*
-50° C to +125° C (-58° F to +257° F)
5% to 90% (non-condensing)
12,000 feet (3,658 meters)
•● Module Feature
*Please see hardware reference manual for detailed information
Specifications
Digi Connect ME® 9210
Digi Connect Wi-ME® 9210
Power Requirements (3.3 VDC)
Maximum
450 mA (1.485 W)
346 mA (1.14 W)
UART and Ethernet activated
Typical
Idle
186 mA (613 mW)
/16 clock scaling, Ethernet activated
–
3.3 VDC @ 34 mA (113 mW)
3.3 VDC @ 142 mA (486 mW)
Sleep
Regulatory Approvals
FCC Part 15 Class B, EN 55022 Class B
•
EN 61000-3-2 and EN 61000-3-3
•
ICES-003 Class B, VCCI Class II, AS 3548
•
FCC Part 15 Sub C Section 15.247
•
IC RSS-210 Issue 5 Section 6.2.2(o)
•
EN 300 328, EN 301 489-17
•
UL 60950-1, EN 60950 (EU)
•
CSA C22.2, No. 60950
•
EN 55024
•
Intentional Radiation
•
•
Module Pinout
Pin
UART
GPIO
Recommended PCB Layout
Ext IRQ
IC
SPI
2
FIM
Other
1
VETH+
2
VETH-
3-6
Positions removed
7
RxD
GPIO[3]
IN
8
TxD
GPIO[7]
OUT
Timer Out 7
Timer In 8
9
RTS
GPIO[5]
CLK
Timer Out 6
10
DTR
GPIO[6]
11
CTS
GPIO[1]
0
PIC[1]
12
DSR
GPIO[2]
1
PIC[2]
13
DCD
GPIO[0]
3
PIC[3]
Timer In 7
EN
PIC[0]
14
/RST
15
3.3V
16
GND
17
GPIO[12]
18
GPIO[9]
19
20
Module Feature
SDA
0
CLK
RESET_DONE
CLK
INIT
Timer Out 9
SCL
Reserved
GPIO[13]
Visit www.digiembedded.com for part numbers.
91001478
D2/612
DIGI SERVICE AND SUPPORT - You can purchase with confidence knowing that Digi is here to support you
with expert technical support and a strong five-year warranty. www.digi.com/support
Digi International
Worldwide HQ
877-912-3444
952-912-3444
Digi International
France
+33-1-55-61-98-98
www.digi.fr
Digi International
Japan
+81-3-5428-0261
www.digi-intl.co.jp
Digi International
India
+91-80-4287-9887
Digi International
Singapore
+65-6213-5380
Digi International
China
+86-21-5150-6898
www.digi.cn
© 2009-2012 Digi International Inc.
All rights reserved. Digi, Digi International, the Digi logo, the Making Wireless M2M Easy logo, Digi Connect ME, Digi ESP, Digi JumpStart Kit, iDigi,
iDigi Device Cloud, iDigi Manager Pro, NET+ and NET+OS are trademarks or registered trademarks of Digi International Inc. in the United States and
other countries worldwide. ARM and NET+ARM are trademarks or registered trademarks of ARM Limited. All other trademarks are the property of their
respective owners. All information provided is subject to change without notice.
BUY ONLINE • www.digiembedded.com
Download PDF