ViewSonic | PJ402D | Product specifications | ViewSonic PJ402D Product specifications

Š
9LHZ6RQLF
3-'
Portable DLP3URMHFWRU
8VHU*XLGH
使用手冊
Փ⫼᠟‫ݞ‬
Š
9LHZ6RQLF
Compliance Information
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient of relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Compliance Information for Canada
Notice: This class B digital apparatus complies with Canada ICES-003.
AVIS: Cet appeil numerique de la Classe B conforme a la norme NMB-003 du
Canada.
Compliance Information for European Countries
CE Conformity
The device complies with the requirements of the EEC directive 89/
336/EEC as amended by 92/31/EEC and 93/68/EEC Art. 5 with regard
to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/
68/EEC Art. 13 with regard to “Safety.”
User Information for all Countries
Notice: Use the cables which are included with the projector or specified.
ViewSonic PJ402D
1
Important Safety Instructions
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this unit near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8
Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10
Protect the power cord from being walked on or pinched particularly at
plugs. convenience receptacles and the point where they exit from the unit.
Be sure that the power outlet is located near the unit so that it is easily
accessible.
11
Only use attachments/accessories specified by the manufacturer.
12
Use only with the cart,!stand, tripod, bracket, or table specified by the
manufacturer, or sold with the unit. When a cart is used, use caution when
moving the cart/unit combination to avoid injury from tip-over
13
Unplug this unit when unused for long periods of time.
14
Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the unit, the
unit has been exposed to rain or moisture, does not operate normally, or
has been dropped.
ViewSonic PJ402D
2
Copyright © 2005 ViewSonic Corporation. All rights reserved.
Apple, Mac and ADB registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks
of Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds logo and OnView are registered trademarks of
ViewSonic Corporation.
VESA and SVGA are registered trademarks of the Video Electronics Standards
Association.
DPMS and DDC are trademarks of VESA.
PS/2, VGA and XGA are registered trademarks of International Business Machines
Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages
resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves
the right to change product specifications without notice. Information in this
document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means,
for any purpose without prior written permission from ViewSonic Corporation.
Electronic Warranty Registration
To meet your future needs, and to receive any additional product information
as it becomes available, please register your projector’s warranty on the
Internet at:!http://www.viewsonic.com
For Your Records
Product Name:
Model Number:
Document Number:
PJ402D
ViewSonic Portable DLP Projector
VS10400
PJ402D-1_UG_ENG Rev. 1A 04-18-05
Serial Number:
Purchase Date:
_______________________________
_______________________________
ViewSonic PJ402D
3
Notes on AC Power Cord
AC Power Cord must meet requirement of country where you use a projector. Confirm
an AC plug type with graphics below and proper AC Power Cord must be used. If
supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
This projector is equipped with a grounding type AC line plug. Make sure that your
outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We
highly recommend using a video source device also equipped with a grounding type
AC line plug to prevent from signal interference due to voltage fluctuation.
Ground
For Australia and
Mainland China
For the U.S.A. and Canada
Ground
For Continental Europe
ViewSonic PJ402D
Ground
Ground
For the U.K.
4
CONTENTS
Product Introduction ................................................................................................. 6
Projector Features ............................................................................................. 6
Package Contents ............................................................................................. 7
Getting to Know the Projector .................................................................................. 8
Projector Components ...................................................................................... 8
Remote Control Components .......................................................................... 11
Installation .............................................................................................................. 12
Connecting the Projector ................................................................................. 12
Powering On/Off the Projector ........................................................................ 16
Adjusting the Projected Image ........................................................................ 17
Adjusting the Projector Zoom and Focus ........................................................ 18
Adjusting Projection Image Size ...................................................................... 18
Using the Projector ................................................................................................. 20
Control Panel ................................................................................................... 20
Remote Control ............................................................................................... 21
Menu Options ......................................................................................................... 24
Image .............................................................................................................. 25
Video ............................................................................................................... 28
Display ............................................................................................................ 29
Language ........................................................................................................ 30
Advanced ........................................................................................................ 31
Audio ............................................................................................................... 32
Maintenance ........................................................................................................... 33
Cleaning the Lens ............................................................................................ 33
Cleaning the Projector Housing ........................................................................ 33
Replacing the Lamp .......................................................................................... 34
Technical Specifications ......................................................................................... 36
Appendix ................................................................................................................ 37
Indicator Messages ......................................................................................... 37
Preset Signals ................................................................................................. 38
ViewSonic PJ402D
5
Product Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user-friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
Single chip 0.55" Texas Instruments DLP™ technology
SVGA (800 x 600 pixels)
Compact size, light weight for portability
1.2x manual zoom lens
Auto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scaling compression
compatibility for VGA, SVGA, XGA*and SXGA*.
State-of-the-art motion adaptive hardware deinterlacing with 3:2 pull down
200-watt, user-replaceable lamp
Compatibility with Macintosh® computers
Compatibility with NTSC, PAL, SECAM, and HDTV
Multi-function remote control
D-Sub 15-pin cable for analog video connectivity
User-friendly, multi-language on-screen display (OSD)
Advanced electronic keystone correction
* means compressed.
ViewSonic PJ402D
6
Package Contents
When you unpack the projector, make sure you have all these components:
Projector with Lens Cap
S-Video Cable
Battery for
Remote Control
AC Power Cord
Composite Video Cable
Remote Control (IR)
VGA Cable (D-SUB to D-SUB)
Audio Cable
Projector
Carrying Case
Quick Start Guide
Optional Accessory:
Wizard CD
NOTE
VGA (D-SUB) to
HDTV (RCA) Cable
Save the original shipping carton and packing material; they will come
in handy if you ever to ship your unit. For maximum protection, repack
your unit as it was originally packed at the factory.
Accessories and components may vary by retailer and region.
ViewSonic PJ402D
7
Getting to Know the Projector
Projector Components
Front View
10
8
9
1
1.
2.
3.
4.
5.
Lens cap
Lens cap strap
Lens
Ventilation holes (intake)
Zoom ring
ViewSonic PJ402D
7
6
2
6.
7.
8.
9.
10.
4
5
3
Focus ring
Control panel
Speaker
Front IR remote control sensor
Ventilation holes (exhaust)
8
Rear View
1.
2.
3.
4.
5.
6.
7.
Interface connector
Rear IR remote control sensor
Security lock receptacle
AC power socket
Ventilation holes (intake)
Foot adjuster
Foot adjuster button
1
2
3
7
6
4
5
6
7
Bottom View
1. Lamp cover
1
ViewSonic PJ402D
9
Control Panel
LED
1. POWER (Power LED indicator)
2. LAMP (Lamp LED indicator)
Button
1.
2. MENU\ENTER
3. KEYSTONE (S/T)
4. AUTO (X)
5. Four direction buttons
6. SOURCE (W )
1
1
2
2
3
4
5
6
Interface Connector
1
2
3
4
5
1. USB connector
This connector is used for engineering purpose.
2. AUDIO input connector
Connect an audio output from video equipment to this jack.
3. COMPUTER IN (D-SUB) connector
Connect image input signal (analog) to this connector.
4. S-VIDEO connector
Connect S-Video output from video equipment to this jack.
5. VIDEO connector
Connect composite video output from video equipment to this jack.
ViewSonic PJ402D
10
Remote Control Components
Power button
1.
2. Four direction buttons
3. Menu button
4. Enter button
5. Keystone c/d buttons
6. Volume c/d buttons
7. Source button
8. Mute button
9. Blank button
10. 4:3/16:9 button
11. Auto button
1
7
POWER
AUTO
2
11
3
MENU
9
4
ENTER
BLANK
10
LASER
6
5
VOLUME
4:3/16:9
MUTE
ViewSonic PJ402D
SOURCE
KEYSTONE
8
11
Installation
Connecting the Projector
A. Connecting to a computer
1 AC Power Cord
2 VGA Cable (D-SUB to D-SUB)
1
Desktop type
Laptop type
2
ViewSonic PJ402D
12
B. Connecting to a Video Source
1.Connecting with S-Video Cable
1 AC Power Cord
2 S-Video Cable
3 Audio Cable
1
3
2
ViewSonic PJ402D
13
2.Connecting with Composite Video Cable
1 AC Power Cord
2 Composite Video Cable
3 Audio Cable
1
3
2
ViewSonic PJ402D
14
3.Connecting with HDTV Cable
1 AC Power Cord
2 D-SUB to HDTV Cable
3 Audio Cable
1
3
2
When connecting cable, power cords of both a projector and external
equipment should be disconnected from AC outlet.
ViewSonic PJ402D
15
Powering On/Off the Projector
Powering On the Projector:
1. Remove the projector lens cap.
2. Complete the AC power cord and peripheral signal cable(s) connections.
3. Press the button on the Projector Control Panel or the Power button on the
Remote Control to turn on the power.
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source.
If the “Searching for source” message appears on the screen, ensure that
the appropriate signal cable(s) are securely connected.
If you are connecting multiple sources to the projector simultaneously, press the
SOURCE button on the Projector Control Panel or the Source button on the
Remote Control to select the desired source.
Warning:
Never look into the lens when the lamp is on. This can damage your eyes. It is
especially important that children are not allowed to look into the lens.
Powering Off the Projector:
1. Press the button on the Projector Control Panel or the
Remote Control. A message will appear on the screen:
Power button on the
2. Press the button on the Projector Control Panel or the Power button on the
Remote Control again to turn off the power. Wait until the lamp LED indicator turns
off.
Please wait until the fan motor and the lamp LED turn off before removing
the AC power cord from the projector.
ViewSonic PJ402D
16
Adjusting the Projected Image
Adjusting the Projector Height
To raise the projector:
1. Lift up the rear side of the projector, and press the foot adjuster buttons on the two
sides.
2. Raise the projector to the desired display height, and then release the buttons to
lock the foot adjusters into position.
To lower the projector:
1. Lift up the rear side of the projector, and press the foot adjuster buttons on the two
sides.
2. Lower the projector, and then release the buttons to lock the foot adjusters into
position.
You may turn the foot adjuster to make fine adjustment of the height.
To avoid damaging the projector, make sure that the foot adjuster is
fully retracted before placing the projector in its carrying case.
ViewSonic PJ402D
17
Adjusting the Projector Zoom and Focus
Focus Ring
Zoom Ring
1. Adjust the image size by rotating the zoom ring.
Rotate to the right to reduce the image.
Rotate to the left to enlarge the image.
2. Focus the image by rotating the focus ring.
A still image is recommended for focusing.
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection distance.
Distance between the screen
and the center of the lens
ViewSonic PJ402D
18
Projection 4 : 3 Screen Size –Diagonal
Distance
(inch)
(m)
Wide
Tele
1.2
33.0
27.5
1.5
41.2
34.3
2
55.0
45.8
2.2
60.5
50.4
3
82.5
68.7
4
110.0
91.6
5
137.5
114.5
6
165.0
137.5
7
192.5
160.4
8
220.0
183.3
9
247.5
206.2
10
275.0
229.1
* This table is for user reference only.
NOTE
16 : 9 Screen Size-Diagonal
(inch)
Wide
Tele
30.2
25.2
37.8
31.5
50.4
42.0
55.5
46.2
75.7
63.1
100.9
84.1
126.2
105.1
151.4
126.2
176.6
147.2
201.9
168.2
227.1
189.3
252.4
210.3
Position the projector in a horizontal position; other positions can cause
heat build-up and damage to the projector.
Make sure the heat ventilation holes are not blocked.
Do not use the projector in a smoky environment. Smoke residue may
cause buildup on critical parts (i.e. DMD, lens assembly, etc.)
ViewSonic PJ402D
19
Using the Projector
Control Panel
1
1
2
2
3
4
5
LED
1. POWER (Power LED indicator)
Refer to “Indicator Messages”.
2. LAMP (Lamp LED indicator)
Refer to “Indicator Messages”.
6
Button Function
1.
Refer to “Powering On/Off the Projector”.
2. MENU \ ENTER
Press the MENU\ENTER button to activate the OSD (On-Screen Display) menu. Use
the directional buttons and MENU\ENTER button to navigate through the OSD (OnScreen Display) menu and select choices.
3. KEYSTONE (S/T)
Adjusts image distortion caused by tilting the projector.
4. AUTO (X)
Automatically adjusts frequency and phase.
5. Four direction buttons
The four direction buttons c/b/e/f can be used to scroll through OSD (OnScreen Display) menus and make adjustments.
6. SOURCE (W)
Manually selects an input source.
ViewSonic PJ402D
20
Remote Control
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Power
Refer to “Powering On/Off the Projector”.
Four direction buttons
The four direction buttons c/b/e/f
can be used to scroll through OSD (OnScreen Display) menus and make
adjustments.
Menu
Press the Menu button to activate the
OSD (On-Screen Display) menu. Use
the directional buttons and Menu button
to navigate through the OSD (On-Screen
Display) menu.
Enter
Confirms the selection
Keystone c /d
Adjusts image distortion caused by tilting
the projector.
Volume c /d
Press the Volume c button to increase
the volume;
;;press the Volume d button
to reduce the volume.
Source
Manually selects an input source.
Mute
Cuts off the sound temporarily.
Blank
Cuts off the screen temporarily.
4:3/16:9
Press the 4:3/16:9 to switch the image
aspect ratio from 4:3 to 16:9.
Auto
Automatically adjusts frequency and
phase.
ViewSonic PJ402D
1
7
POWER
AUTO
SOURCE
2
11
3
MENU
9
4
ENTER
BLANK
10
LASER
6
5
VOLUME
4:3/16:9
MUTE
KEYSTONE
8
21
Batter y Replacement
Keep the battery out of the reach of children. There is a danger of death
by accidentally swallowing the battery.
Do not recharge the used battery or expose the battery to fire or water.
Do not dispose of the used battery along with household waste. Dispose
of used batteries according to local regulations.
Avoid excessive heat and humidity. Danger of explosion may happen if
a battery is incorrectly replaced. Replace only with the same type
recommended by the manufacturer.
ViewSonic PJ402D
22
Remote Control Operation
Point the remote control at the infrared remote sensor and press a button.
MUTE
ME
VOLU
:9
4:3/16
TONE
KEYS
LASE
R
ENTE
R
BLAN
K
MENU
POW
ER
AUTO
SOUR
CE
MUTE
KEYSTONE
4:3/16:9
VOLUME
LASER
BLANK
ENTER
MENU
SOURCE
AUTO
POWER
7m
BLAN
R
MENU
POWE
KEYST
ONE
LASER
4:3/16:
9
ENTER
MUTE
E
VOLUM
3m
AUTO
K
SOUR
CE
NOTE
20
POWER
AUTO
SOURCE
ER
BLAN
K
R
KEYS
TONE
MENU
R
ENTE
POW
AUTO
3m
CE
SOUR
3m
LASE
20
4:3/16
:9
20
MUTE
A. Straight Distance: within about 7
meters from the
front of the remote
sensor.
B. Direction:
Angle:
within about 20 degrees
of the remote sensor in
every direction.
Distance: within about 3 meters
from the front of the
remote sensor.
20
VOLU
ME
3m
7m
MENU
ENTER
BLANK
LASER
VOLUME
4:3/16:9
KEYSTONE
MUTE
CE
SOUR
AUTO
ER
POW
U
MEN
K
BLAN
R
R
ENTE
LASE
TONE
KEYS
:9
4:3/16
ME
VOLU
MUTE
The remote control may not operate when there is sunlight or other
strong light such as a fluorescent lamp shining on the remote sensor.
Operate the remote control from a position where the remote sensor is
visible.
Do not drop the remote control or jolt it.
Keep the remote control out of locations with excessively high
temperature or humidity.
Do not get water on the remote control or place wet objects on it.
Do not disassemble the remote control.
ViewSonic PJ402D
23
Menu Options
The projector has multi-language OSD (On-Screen Display) menus that can only be
displayed when an input source is present. The menus can be accessed using either
the Projector Control Panel or the Remote Control.
The OSD (On-Screen Display) menus allow you to make image adjustments and change
a variety of settings. If source is a computer, the OSD (On-Screen Display) allows
changes to the Display tab. When using a video source, the OSD (On-Screen Display)
allows changes to the Video tab. The projector automatically detects the source.
1. Press the MENU\ENTER button on the Projector Control Panel or the Menu button
on the Remote Control.
2. Select the menu tab with the e/f buttons either on the Projector Control Panel or
the Remote Control.
3. Select the desired menu option item with the c/d buttons either on the Projector
Control Panel or the Remote Control.
To enter its respective sub-menu, refer to each menu option section for more
details.
4. To exit from the menu:
On the Projector Control Panel: Go back to main menu tab with the c /d buttons,
and press the MENU\ENTER button.
On the Remote Control: press the Menu button.
The illustrations in this manual are for the purpose of explanation and
may differ from the actual setting of your projector.
ViewSonic PJ402D
24
Image
Option
Contrast
Actions/Descriptions
Controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast
changes the amount of black and white in the image.
Brightness
Select the desired setting with the e/f buttons:
Press the e button to decrease the contrast.
Press the f button to increase the contrast.
Adjusts the brightness of the image.
Keystone
Select the desired setting with the e/f buttons:
Press the e button to darken the image.
Press the f button to lighten the image.
Adjusts image distortion caused by tilting the projector.
Aspect Ratio
ViewSonic PJ402D
Select the desired setting with the e/f buttons:
Press the e button to reduce the upper width.
Press the f button to reduce the lower width.
Selects this function to fit 1:1, 16:9, 4:3 aspect ratio. In
order to use the 1:1 aspect ratio, the input must be a
computer signal (through VGA cable) of resolution less
than SVGA (800 x 600). If the input signal is a computer
signal greater than SVGA or component 1080i / 720p,
only 16:9 or 4:3 aspect ratio will be available.
25
Blank Screen
Select the desired setting with the e/f buttons:
1:1: The input source will be displayed without scaling
16:9: The input source will be displayed in wide screen
mode (16:9) without scaling. The source will be scaled to
fit the width of the screen.
4:3: The input source will be scaled to fit the screen.
Blanks the screen temporarily, and selects the screen
color when Blank Screen is active.
Select the desired setting with the e / f buttons:
White
Black
Blue
Gray
Red
Green
Yellow
Cyan
Gamma
Magenta
Selects Gamma Mode.
White Peaking
Select the desired setting with the e / f buttons:
Film : Dark video image mode
Photographic: Computer photo mode
RGB: Computer text mode
Video : Common video mode
White Peaking can be adjusted between 0 and 10.
Color Temperature
ViewSonic PJ402D
Select the desired setting with the e / f buttons:
Setting 10 will maximize the brightness.
Setting 0 will maximize color reproduction quality.
Adjusts the color temperature. With the higher
temperature, the screen looks colder; with the lower
temperature, the screen looks warmer. Red, Green
and Blue mode activate only if the Color Temperature
is set to “User”.
26
Red
Select the desired setting with the e / f buttons:
Hi
Mid
Low
User
Manually adjusts red.
Green
Select the desired setting with the e / f buttons:
Press the e button to decrease the color temperature.
Press the f button to increase the color temperature.
Manually adjusts green.
Blue
Select the desired setting with the e / f buttons:
Press the e button to decrease the color temperature.
Press the f button to increase the color temperature.
Manually adjusts blue.
Select the desired setting with the e / f buttons:
Press the e button to decrease the color temperature.
Press the f button to increase the color temperature.
ViewSonic PJ402D
27
Video
Option
Saturation
Actions/Descriptions
Adjusts a video image from black and white to fully saturated color.
Tint
Select the desired setting with the e / f buttons:
Press the e button to decrease the amount of color in the image.
Press the f button to increase the amount of color in the image.
Adjusts the color balance of red and green.
Sharpness
Select the desired setting with the e / f buttons:
Press the e button to increase the amount of green in the image.
Press the f button to increase the amount of red in the image.
Adjusts the sharpness of the image.
Select the desired setting with the e / f buttons:
Press the e button to decrease the sharpness.
Press the f button to increase the sharpness.
ViewSonic PJ402D
28
Display
Option
Phase
Tracking
Actions/Descriptions
Synchronizes the signal timing of the display with that of the
graphic card. If you experience an unstable or flickering
image, use the phase function to correct it.
Select the desired setting with the e / f buttons:
Press the e button to decrease the value.
Press the f button to increase the value.
Changes the display data frequency to match the frequency
of your computer graphic card. If you experience a vertical
flickering bar, use the tracking function to make an adjustment.
H.Position
Select the desired setting with the e / f buttons:
Press the e button to decrease the value.
Press the f button to increase the value.
Adjusts the horizontal position.
V.Position
Select the desired setting with the e / f buttons:
Press the e button to move the image left.
Press the f button to move the image right.
Adjusts the vertical position.
Select the desired setting with the e / f buttons:
Press the e button to move the image up.
Press the f button to move the image down.
ViewSonic PJ402D
29
Language
Option
Language
Actions/Descriptions
Selects the language for menu and message displayed.
Select the language you prefer with the c/ d buttons, and confirm
the selection with the MENU\ENTER button on the Projector Control
Panel or the Enter button on the Remote Control.
English
Deutsch
Français
Español
Português
Italiano
ViewSonic PJ402D
30
Advanced
Option
Auto Source
Select
Actions/Descriptions
Automatically scans the input source.
Rear
Press the MENU\ENTER button on the Projector Control Panel or the
Enter button on the Remote Control to active this function.
The image is reversed horizontally.
Ceiling
Press the MENU\ENTER button on the Projector Control Panel or the
Enter button on the Remote Control to active this function.
The image is inverted vertically.
ECO Mode
Lamp Hours
Color Space
Press the MENU\ENTER button on the Projector Control Panel or the
Enter button on the Remote Control to active this function.
Uses this function to dim the projector lamp light output
which will lower power consumption and increase lamp life.
Select the desired setting with the e/f buttons:
ON
OFF
Displays operating hours since lamp timer reset. Lamp hour
counter is displayed in read-only format, and this setting
cannot be manually adjusted.
Manually selects signal type.
Select the input signal type with the e/f buttons:
RGB
YCbCr
YPbPr
ViewSonic PJ402D
31
Auto Shutdown
OSD Timeout
Menu Position
Factory Reset
Uses this function to automatically turn off the lamp if the
projector does not detect an input signal for specified
time period (30 minutes).
Select the desired setting with the e / f buttons:
ON
OFF
Duration OSD (On-Screen Display) menu stays active (at
idle state by second).
Select the desired setting with the e / f buttons.
Selects the position of the OSD (On-Screen Display) menu
on the screen.
Select the desired setting with the e / f buttons.
Resets the projector to its factory default settings.
Press the MENU\ENTER button on the Projector Control Panel or the
Enter button on the Remote Control to enter its sub-menu, select
the desired setting with the e / f buttons, and confirm the selection
with the MENU\ENTER button on the Projector Control Panel or the
Enter button on the Remote Control again.
Audio
Option
Volume
Actions/Descriptions
Adjusts the volume.
Mute
Select the desired setting with the e / f buttons:
Press the e button to decrease the volume.
Press the f button to increase the volume.
Cuts off the sound temporarily.
Select the desired setting with the e / f buttons:
ON
OFF
ViewSonic PJ402D
32
Maintenance
The projector needs proper maintenance. You should keep the lens clean as dust, dirt
or spots will project on the screen and diminish image quality. The only part you could
replace yourself is the lamp. If any other parts need replacing, contact your dealer or
qualified service personnel. When cleaning any part of the projector, always switch off
and unplug the projector first.
Warning:
Never open any of the covers on the projector except the lamp cover. Dangerous
electrical voltages inside the projector can cause severe injury. Except as specifically
indicated in this User’s Manual, do not attempt to service this product yourself.
Refer all servicing to qualified service personnel.
Cleaning the Lens
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.
Cleaning the Projector Housing
Gently wipe with a soft cloth. If dirt and stains are not easily removed, use a soft cloth
damped with water, or water and neutral detergent, and wipe dry with a soft, dry cloth.
NOTE
Turn off the projector and remove the AC power cord from the power
outlet before beginning maintenance work.
Make sure the lens is cool before cleaning.
Do not use detergents or chemicals other than those noted above. Do
not use benzene or thinners.
Do not use chemical sprays.
Use a soft cloth or lens paper only.
ViewSonic PJ402D
33
Replacing the Lamp
Projector lamps have a finite life. Replace the lamp when:
The image becomes darker and hues become weaker after a lamp has been for a
long period of time.
The projector lamp LED indicator turns into red. Refer to section titled “Indicator
Messages” for further details.
NOTE
The lamp becomes high temperature after turning off the projector with
the power button. If you touch the lamp, you may scald your finger.
When you replace the lamp, wait for at least 45 minutes for the lamp to
cool down.
Do not touch the lamp glass at any time. The lamp may explode due to
improper handling, including the touching of the lamp glass.
Lamp lifetime may differ from lamp to lamp and according to the
environment of use. There is no guarantee of the same lifetime for each
lamp. Some lamps may fail or terminate their lifetime in a shorter period
of time than other similar lamps.
A lamp may explode as a result of vibration, shock or degradation as a
result of hours of use as its lifetime draws to an end. Risk of explosion
may differ according to the environment or conditions in which the
projector and lamp are being used.
Wear protective gloves and eyeglasses when fixing or detaching the lamp.
Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at
least for 5 minutes to turn off the projector after powering on.
Do not operate the lamp in proximity to paper, cloth, or other combustible
material nor cover it with such materials. Otherwise it could cause a
fire.
Do not operate the lamp in an atmosphere containing an inflammable
substance, such as thinner. Otherwise it could cause a fire or explosion.
Thoroughly ventilate the area or the room when operating the lamp in
an oxygen atmosphere (in the air). If ozone is inhaled, it could cause
headaches, nausea, dizziness, etc.
The inorganic mercury is involved in the lamp. If the lamp bursts, the
mercury inside the lamp will go out of the projector. Leave the area
immediately if the lamp shatters while being operated and ventilate the
area for at least 30 minutes in order to avoid the inhalation of mercury
fumes. Otherwise it could be harmful to user's health.
ViewSonic PJ402D
34
1. Turn off the projector and unplug
the AC power cord.
2. Place a protective sheet (cloth)
beneath the projector. Turn the
projector over so you can access
the lamp cover.
3. Remove the access panel screws
and open the panel.
4. Remove the screws on the bottom
of the lamp assembly.
5. Grasp the lamp handle and pull the
lamp assembly directly out of the
projector.
6. Replace with the new lamp.
7. Place back the screws on the bottom
of lamp assembly.
8. Place the panel and screw back the
screws on the lamp cover.
NOTE
Dispose of the used lamp according to local regulations.
Ensure that screws are tightened properly. Screws not tightened fully
may result in injury or accidents.
Since the lamp is made of glass, do not drop the unit and do not scratch
the glass.
Do not reuse the old lamp. This could cause the lamp to explode.
Be sure to turn off the projector and unplug the AC power cord before
replacing the lamp.
Do not use the projector with the lamp cover removed.
ViewSonic PJ402D
35
Technical Specifications
Projection System
Native resolution
Single panel 0.55” DLP projector
480,000 dot x1 (800 x 600 x1)
Lens
Manual Zoom (1.2X)
Focal Length
20.2 - 24.2 mm
Aspect Ratio
Screen Size
Lamp
Projection Type
Video Input
Input Source
Scanning Frequency
Horizontal Freq.
Vertical Freq.
Pixel Rate
1:1, 16:9, 4:3
30 – 200 inches
200W
Front, Rear, Ceiling
PAL,NTSC, SECAM
Computer, HDTV, S-Video, Video
Digital Keystone Correction
Analog RGB (input signal)
Vertical: +/- 15 degrees
D-Sub connector
HDTV Display
Integrated Speaker
720p(60 Hz), 1080i(60 Hz)
2W x 1
31 - 79 KHz
56 - 85 Hz
135 MHz
Remote Control
Multifunctional
OSD Language
Operational Ambient
Multilanguage
Temperature: +5 - +350C
Humidity: 10 - 85%
Certification
UL, CE, FCC Class B, CCC, CB, TUV-GS
Power Supply
Power Consumption
Dimension (W x D x H)
Weight
AC 100 - 240 V, 50 - 60 Hz
250 Watts
254 x 202 x 98 mm
2.1 kg (4.6 lb)
Note: Design and Specifications are subject to change without prior notice.
ViewSonic PJ402D
36
Appendix
Indicator Messages
LED Type
Power LED
Color Status
Green Flashing
Power LED
Amber Solid
Power LED
Green
Solid
Lamp LED
Green
Solid
Lamp LED
Amber Solid
Lamp LED
Green
Lamp LED
Amber Flashing
ViewSonic PJ402D
Flashing
Meaning
The projector is powered and ready.
The projector system has some problems with its
fan, so the projector cannot start up.
The projector is in good condition on working.
The lamp is in good condition and is projecting at
maximum brightness.
The lamp has reached its end of life and must be
changed soon. The lamp will continue to operate
until it fails. Change the lamp. If the lamp is off,
then the ballast will become malfunction.
The projector is shutting down. The fan motor is
cooling the lamp for shutdown. Do not unplug the
power cable or turn the power switch off before
the lamp LED turns off. The fan motor will turn off
when the lamp has cooled.
Temperature is too high. The lamp will turn off.
37
Preset Signals
Preset signal
640 x 480
VGA mode 3
VGA VESA 72 Hz
VGA VESA 75 Hz
VGA VESA 85 Hz
800 x 600
SVGA VESA 56 Hz
SVGA VESA 60 Hz
SVGA VESA 72 Hz
SVGA VESA 75 Hz
SVGA VESA 85 Hz
1024 x 768 XGA VESA 60 Hz
XGA VESA 70 Hz
XGA VESA 75 Hz
XGA VESA 85 Hz
1152 x 864
SXGA VESA 70 Hz
SXGA VESA 75 Hz
SXGA VESA 85 Hz
1280 x 960 SXGA VESA 60 Hz
SXGA VESA 75 Hz
1280 x 1024 SXGA VESA 60 Hz
ViewSonic PJ402D
fH (kHz)
31.469
37.861
37.500
43.269
35.156
37.879
48.077
46.875
53.674
48.363
56.476
60.023
68.677
63.995
67.500
77.487
60.000
75.000
63.981
fV (Hz)
59.940
72.809
75.000
85.008
56.250
60.317
72.188
75.000
85.061
60.004
70.069
75.029
84.997
70.016
75.000
85.057
60.000
75.000
60.020
Sync
H(-), V(-)
H(-), V(-)
H(-), V(-)
H(-), V(-)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(-), V(-)
H(-), V(-)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
Size
800
832
840
832
1024
1056
1040
1056
1048
1344
1328
1312
1376
1472
1600
1568
1800
1680
1688
38
HDTV Preset Signals
Preset Signals
480i
480p
720p
1080i
Horizontal Frequency (kHz)
15.8 kHz
31.5 kHz
Vertical Frequency (Hz)
60 Hz
60 Hz
45.0 kHz
33.8 kHz
60 Hz
60 Hz
Note: Specifications are subject to change without notice.
ViewSonic PJ402D
39
LIMITED WARRANTY
ViewSonic® Projector
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a
product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole
option repair or replace the product with a like product. Replacement product or parts may include remanufactured or
refurbished parts or components.
How long the warranty is effective:
North and South America: Three (3) years warranty for all parts excluding the lamp, three (3) years for labor, and one
(I) year for the original lamp from the date of the first consumer purchase. Europe except Poland: Three (3) years
warranty for all parts excluding the lamp, three (3) years for labor, and ninety (90) days for the original lamp from the
date of the first consumer purchase. Poland: Two (2) years warranty for all parts excluding the lamp, two (2) years for
labor, and ninety (90) days for the original lamp from the date of the first consumer purchase. Other regions or
countries: Please check with your local dealer or local ViewSonic office for the warranty information.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer's installed lamp
only. All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product!modification, !!!!!!
or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibition a condition commonly known as “image butn-in” which results when a static image
!!!is displayed on the product for an extended period of time.
4. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will
!! need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name,
!!!(c) your!address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center
!!!or!ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the
implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damaged based upon inconvenience, loss of
!! use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with
!!!business relationships, or other commercil loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some
states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential
damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact
ViewSonic or your local ViewSonic dealer.
ViewSonic Projector Warranty (V3.5)
Š
9LHZ6RQLF
Download PDF