Monobolt10mm+Tools EN UK 1

Monobolt10mm+Tools EN UK 1
Monobolt® ø 10 mm
Large Diameter Structural Multi-grip Fastener
The 10 mm size Monobolt fastener extends the
range of our breakstem fasteners for load-bearing
structural applications, combining the benefits
of blind side assembly with high clamp loads
over a wide grip range. It is the ideal solution for
applications requiring one sided access and a high
strength fastener.
Exceptional shear strength and clamp load
Designed to deliver the high strength performance
required in structural applications, it is the strongest
breakstem fastener in its class.
Monobolt
fasteners form a
visible lock when
placed
Excellent hole fill
The radially expanded body is capable of filling
irregular, oversized, slotted or misaligned holes,
whilst providing very strong, vibration resistant
joints. It can also stop sheet movement in nonstandard holes.
Wide grip range
By accommodating wide variations in material
thickness, 10 mm Monobolt fasteners can be used
in a variety of applications to reduce assembly
time, stock levels and costs.
Stem mechanically locked into body
A mechanically locked stem provides very strong,
vibration resistant joints without the damage,
electrical problems or rattling due to loose stems.
The visible lock provides the ability to visually
inspect for correct installation.
Technical Data
D2
D1
Headform: Protruding head
øB
Material and finish:
2711 series: Stainless steel
2771 series: Steel, zinc plated and clear passivated
2774 series: Aluminium
T
M
ø
M
øB
D1
T
D2
nom.
min.
max.
min.
max.
max.
max.
max.
min.
max.
10.0
3.04
15.88
9.95
10.4
36.2
20.3
4.1
22.3
4.0
Part No.
Shear
(typical)
Tension
(typical)
26.1 kN
19.4 kN
02711-01228
26.3 kN
12.6 kN
16.5 kN
9.3 kN
02771-012281)
02774-01228
Dimensions in mm; 1) Deutsches Institut für Bautechnik (DIBt) Approval No. Z-14.1-4, Anlage 2.24
www.StanleyEngineeredFastening.com
Avdel UK Limited
Stanley House, Works Road
Letchworth Garden City, Hertfordshire SG6 1JY
Tel. +44 (0)1582 900-000 · Fax -001
enquiries2@sbdinc.com
© 2013 Stanley Black & Decker, Inc., Rev. 02a.2013 Avdel®, and Monobolt® are trademarks of Avdel UK Limited. POP® is a trademark of Emhart Teknologies.
Data shown is subject to change without prior notice as a result of continuous product development and improvement policy.
Your local STANLEY Engineered Fastening representative is at your disposal should you need to confirm latest information.
page 1/2
Monobolt® ø 10 mm
Installation Tools
7287 Model
Recommended for large volume production use
Features
•Installs Monobolt ø 10 mm with single pull action
•Hydro-pneumatic split tool
•Extended stroke and pull force
•Short cycle time
•Lightweight placing head
•Remote intensifier mounted on castors
•3 m hose length
Benefits
Specifications
•Does not require second actuation (two pulls)
•High placement speed
•Can offer labour cost savings
•Can increase assembly capacity
•Reduces operator fatigue
•Flexible use in the assembly line
•Reduced noise output during fastener installation
Pistol weight (without equipment)
1.47 kg
Total weight (without equipment)
40 kg
Pull force @ 5.5 bar
32.4 kN
Stroke
29 mm
32 mm
Cycle time approx.
1.7 sec
Basic Tool:
Part No. 07287-00200
Complete Nose Equipm.: Part No. 07220-07200
(including nose tip)
Nose Tip:
Part-No. 07220-07101
Free air volume @ 5.5 bar
3.5 litres
Noise level
75 dB(A)
Vibration
<2.5m/s²
min. under load
free cycling
73200 Model
Recommended for prototyping and low volume
production use
Features
•Two tool actuations are needed to fully place the
Monobolt ø 10mm fastener
•Hydro-pneumatic hand tool
•Designed for heavy duty use over long periods of
time
Benefits
•Extremely durable tool
•High reliability
Basic Tool:
Part No. 73200-02000
Complete Nose Equipm.: Part No. 07220-07200
(including nose tip)
Nose Tip:
Part-No. 07220-07101
www.StanleyEngineeredFastening.com
Specifications
Weight (without equipment)
4.9 kg
Pull force @ 5.5 bar
28.5 kN
Stroke
21 mm
Cycle time approx.
3 sec
Free air volume @ 5.5 bar
15.6 litres
Noise level
75 dB(A)
Vibration
<2.5m/s²
Avdel UK Limited
Stanley House, Works Road
Letchworth Garden City, Hertfordshire SG6 1JY
Tel. +44 (0)1582 900-000 · Fax -001
enquiries2@sbdinc.com
© 2013 Stanley Black & Decker, Inc., Rev. 02a.2013 Avdel®, and Monobolt® are trademarks of Avdel UK Limited. POP® is a trademark of Emhart Teknologies.
Data shown is subject to change without prior notice as a result of continuous product development and improvement policy.
Your local STANLEY Engineered Fastening representative is at your disposal should you need to confirm latest information.
page 2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising