Sharp AN-WC11B Specifications

Sharp AN-WC11B Specifications
MODEL
PG-M25X
Setup and Connections
Basic Operation
Easy to Use Functions
DIGITAL MULTIMEDIA
PROJECTOR
Introduction
OPERATION MANUAL
Appendix
IMPORTANT
For your assistance in reporting the loss or theft of your
Projector, please record the Serial Number located on
the bottom of the projector and retain this information.
Before recycling the packaging, please be sure that
you have checked the contents of the carton thoroughly
against the list of “Supplied accessories” on page 20.
Model No.: PG-M25X
Serial No.:
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/
EEC.
Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/
68/EWG.
Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la
directive 93/68/CEE.
Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG.
Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.
Quest’ apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla
direttiva 93/68/EEC.
Η εγκατάσταση αυτή ανταποκρίνεται στις απαιτήσεις των οδηγιών της Ευρωπαϊκής Ενωσης 89/336/
ΕΟΚ και 73/23/ΕΟΚ, #πως οι κανονισµοί αυτοί συµπληρώθηκαν απ# την οδηγία 93/68/ΕΟΚ.
Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão corrigida
pela directiva 93/68/CEE.
Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio de la
93/68/CEE.
Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som kompletteras av 93/68/
EEC.
Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.
Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/EEC.
GyroRemote
This equipment complies with the requirements of Directive 1999/5/EC.
GyroRemote-Fernbedienung
Dieses Gerät entspricht den Anforderungen der EU-Richtlinie 1999/5/EG.
GyroRemote
Cet appareil est conforme aux exigences de la directive 1999/5/CE.
GyroRemote
Dit apparaat voldoet aan de eisen van de richtlijn 1999/5/EG.
GyroFjernbetjening
Dette udstyr overholder kravene i direktiv 1999/5/EF.
GyroRemote
Quest’ apparecchio è conforme ai requisiti delle direttiva 1999/5/CE.
√ıÒÔÛÍÔÈ͸ TÁΘÂÈÒÈÛÙfiÒÈÔ
« ÛıÛÍÂıfi ·ıÙfi ÂÌ·ÒÏÔÌflÊÂÙ·È Ï ÙÈÚ ··ÈÙfiÛÂÈÚ ÙÁÚ Ô‰Á„fl·Ú 1999/5/EK.
GyroRemoto
Este equipamento obedece às exigências da directiva 1999/5/CE.
GyroRemote
Este aparato satisface las exigencias de las Directiva 1999/5/CE.
Gyrofjärrkontroll
Denna utrustning uppfyller kraven enligt direktiv 1999/5/EC.
GyroRemote
Dette produktet oppfyller kravene i direktiv 1999/5/EC.
Gyro-kauko-ohjain
Tämä laite täyttää direktiivin 1999/5/EY vaatimukset.
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should
or
and of the same rating as
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked
above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the
mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of
in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
• The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
The supplied CD-ROM contains operation instructions in English, German, French, Swedish, Spanish, Italian,
Dutch, Portuguese, Chinese and Korean. Carefully read through the operation instructions before operating the
projector.
Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch,
Italienisch, Niederländisch, Portugiesisch, Chinese, und Koreanisch. Bitte lesen Sie die Bedienungsanleitung vor der
Verwendung des Projektors sorgfältig durch.
Le CD-ROM fourni contient les instructions de fonctionnement en anglais, allemand, français, suédois,
espagnol, italien, néerlandais, portugais, chinois et coréen. Veuillez lire attentivement ces instructions avant de
faire fonctionner le projecteur.
Den medföljande CD-ROM-skivan innehåller bruksanvisningar på engelska, tyska, franska, svenska, spanska,
italienska, holländska, portugisiska, kinesiska och koreanska. Läs noga igenom bruksanvisningen innan
projektorn tas i bruk.
El CD-ROM suministrado contiene instrucciones de operación en inglés, alemán, francés, sueco, español,
italiano, holandés, portugués, chino y coreano. Lea cuidadosamente las instrucciones de operación antes de
utilizar el proyector.
Il CD-ROM in dotazione contiene istruzioni per l’uso in inglese, tedesco, francese, svedese, spagnolo, italiano,
olandese, portoghese, cinese e coreano. Leggere attentamente le istruzioni per l’uso prima di usare il
proiettore.
De meegeleverde CD-ROM bevat handleidingen in het Engels, Duits, Frans, Zweeds, Spaans, Italiaans,
Nederlands, Portugees, Chinees en Koreaans. Lees de handleiding zorgvuldig door voor u de projector in
gebruik neemt.
O CD-ROM fornecido contém instruções de operação em Inglês, Alemão, Francês, Sueco, Espanhol, Italiano,
Holandês, Português, Chinês e Coreano. Leia cuidadosamente todas as instruções de operação antes de
operar o projetor.
SPECIAL NOTE FOR USERS IN EUROPE
Before using the projector, please read this operation manual carefully.
ENGLISH
Introduction
Introduction
There are two important reasons for prompt warranty registration of your new SHARP Projector, using
the REGISTRATION CARD packed with the projector.
1. WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service and labor
warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection, modification, or
recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE
READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.
U.S.A. ONLY
WARNING:
High brightness light source. Do not stare into the beam of light, or view directly. Be especially
careful that children do not stare directly into the beam of light.
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
See bottom of actual set.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT REMOVE SCREWS
EXCEPT SPECIFIED USER
SERVICE SCREWS.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING:
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk or electric shock to
persons.
The exclamation point within a triangle is
intended to alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to operate this equipment.
U.S.A. ONLY
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the operation
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to correct the interference
at his own expense.
U.S.A. ONLY
The enclosed computer cable must be used with the device. The cable is provided to ensure that the device
complies with FCC Class A verification.
U.S.A. ONLY
WARNING:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
-1
“Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device”.
CANADA ONLY
For GyroRemote unit (RRMCG1631CESA)
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This device operates in the frequency band of 49.82 to 49.90 MHz with RF output power of less than 30 MicroWatts
EIRP (Effective Isotropic Radiated Power).
Caution
Any changes made to this device not expressly approved by the manufacturer could void the users right to
operate this device.
U.S.A. ONLY
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During
normal operation, when turning the power off always use the POWER button on the projector or on the remote
control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD.
FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
PRODUCT DISPOSAL
This projector utilizes tin-lead solder, and a pressurized lamp containing a small amount of mercury. Disposal of
these materials may be regulated due to environmental considerations. For disposal or recycling information,
please contact your local authorities or, if you are located in the United States of America, the Electronic Industries
Alliance: www.eiae.org .
Caution Concerning the Lamp Replacement
See “Replacing the Lamp” on page 111.
LAMP REPLACEMENT CAUTION
BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.
HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP.
REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-PGM20X//1 ONLY.
UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS
PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL.
PRECAUTIONS A OBSERVER LORS
DU REMPLACEMENT DE LA LAMPE.
DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS.
L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE
AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.
NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-PGM20X//1.
RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX.
ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.
LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION. DANGER POTENTIEL
DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE
A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.
-2
Outstanding Features
Introduction
1. Image Quality
• Superior image quality with Fujinon™ optical lens system.
• Newly developed DDR (Double Data Rate) chip eliminates Color Breaking phenomena common with previous generation DLP™ projectors.
• Newly developed 12° DMD™ chip provides significantly improved optical efficiency and excellent contrast ratio.
2. Light, Compact, and Unique Slim Design
• A new optical engine creates a unique slim design and compact size
(4.2 liters, 5.8 lbs. (2.6 kg)).
3. Superior PC Compatibility
• Supports a refresh rate (vertical frequency) of up to 200 Hz and a wide
range of synchronous signals.
• Using Advanced Compression Technology, computer screens of UXGA
(1,600 # 1,200) resolution can be displayed with minimal distortion.
4. Advanced Computer & Video lntegrated Composer Technology
• Realizes vivid images using the latest high image quality circuitry.
• New I/P conversion algorithm enhances the performance of the motion detect I/P
conversion.
Extensive improvements on the jagged edges or slanted lines in moving images.
• Contrast Control Dynamic Gamma
Improved contrast and natural color gradation by minimizing hue change.
• Color Management Function
Supports sRGB (color management).
• Noise Reduction
Allows for a clear image even with noisy source signals.
• New Edge Up-Scaling
Reduces jaggies and flickering when up-scaling edges of slanted lines, enabling sharper quality
images.
-3
Outstanding Features (cont.)
5. Built-in PCMCIA card slot (Type II)
• Wireless presentations using a wireless LAN PC card.
Supports the global wireless LAN standard, IEEE802.11b.
This wireless LAN PC card complies with IEEE802.11b wireless LAN standards.
Computers with built-in wireless LAN PC cards that support this standard allow for wireless
connections.
Note
• A wireless connection with all IEEE802.11b compliant computers is not guaranteed.
The projector or computer can be placed anywhere you want!
You can expand your presentation efficiency through a wireless connection, for example, by projecting
computer images through a projector installed on the ceiling.
You can project images from multiple computers via a wireless connection.
Effective presentations can now be achieved without having to reconnect data cables.
• PC-less presentations using a memory card.
Just by inserting an IC media (a memory card) such as CompactFlash in the projecter using a
PCMCIA card (Type II) adapter, you can make presentations or auto demonstrations without a
computer.
Note
• For wireless presentations using the wireless LAN PC card, as well as PC-less presentations
using memory cards, please refer to the Wireless Reality software operation manual.
6. GyroRemote
• Using the Gyro function, you can achieve more effective and advanced
presentations.
• The crisp screen pointer gives your presentations a more intuitive touch.
• Using the multi-directional wireless remote control, your transmission
range can be expanded, as well as perform the same operations as a
USB mouse on a computer.
-4
Contents
Outstanding Features ......................................... 3
Contents ............................................................... 5
IMPORTANT SAFEGUARDS ............................... 8
How to Access the PDF Operation Manuals
(Windows, Macintosh) ................................. 13
Part Names ........................................................ 14
Projector (Front and Top View) ................................ 14
Projector (Side View) .............................................. 15
GyroRemote ............................................................. 16
The GyroRemote ............................................... 17
Inserting the Batteries ............................................. 17
Replacing the Batteries ........................................... 17
GyroRemote Features .............................................. 18
Using the GyroRemote ............................................ 19
Calibrating the GyroRemote ................................... 19
Accessories ....................................................... 20
Setup and Connections
Setup .................................................................. 22
Using the Adjustment Feet ..................................... 22
Setting up the Screen .............................................. 23
Screen Size and Projection Distance ...................... 24
Projecting a Reversed/Inverted Image ................... 25
Connecting the Projector to Other Devices .... 26
Before Connecting .................................................. 26
Connecting the Power Cord ................................... 26
Connecting the Projector to a Computer ......... 27
Connecting to Video Equipment ...................... 29
Installing / Removing the PC Card ................... 31
Connecting to a Monitor .................................. 32
Basic Operation
Introduction
Introduction
Operating by Turning your Wrist
(Selecting OSD Menus, Operating Presentation
Tools) .................................................................... 40
Function Assign ....................................................... 41
GyroRemote RF Channel Setting or Confirming ...... 42
Registering the GyroRemote in the Projector .......... 42
Registering Multiple GyroRemotes in
One Projector ....................................................... 43
Using the Presentation Tools ........................... 44
Using the Pointer .................................................... 44
Using the Stamp Function ....................................... 45
Using the Line Function ........................................... 46
Using the Wireless Mouse Function
of the GyroRemote ...................................... 47
Using as a Wireless Mouse ..................................... 47
Connecting the GyroRemote with a Cable ............. 48
Turning Off the GyroRemote ................................... 49
Using the Menu Screen .................................... 50
Menu Selections on the Projector (Adjustments) .... 50
Menu Selections on the projector (Settings) ........... 52
Using the GyroRemote to Navigate the On-screen
Menu (Adjustments) ............................................. 54
Using the GyroRemote to Navigate the On-screen
Menu (Settings) .................................................... 55
Menu Bar Items ................................................. 56
Adjusting the Picture ........................................ 59
Adjusting Image Preferences .................................. 59
Selecting the Signal Type ....................................... 59
Progressive Mode .................................................... 60
Adjusting Computer Images ............................ 61
When Auto Sync is OFF ........................................... 61
Saving Adjustment Settings ..................................... 61
Selecting Adjustment Settings ................................ 62
Special Mode Settings ............................................ 62
Checking the Input Signal ....................................... 63
Auto Sync Adjustment ............................................. 63
Auto Sync Display Function ................................... 64
Image Projection ............................................... 34
Basic Procedure ...................................................... 34
Selecting the On-screen Display Language ........... 37
Adjusting the Lens .................................................. 37
Correcting the Trapezoidal Distortion
(Keystone Correction) ................................. 38
Correcting the Trapezoidal Distortion ...................... 38
Using the GyroRemote ..................................... 40
Before Using the GyroRemote ................................. 40
-5
Contents (cont.)
Easy to Use Functions
Video Digital Noise Reduction (DNR) System ... 91
Reducing Image Noise ............................................ 91
Using the Network ............................................. 66
Before setting the network ....................................... 66
Using a Wireless LAN PC Card ........................ 68
Installing a Wireless LAN PC Card .......................... 68
Ejecting the Card .................................................... 68
Network Settings ............................................... 69
Setting Up a Projector Name ................................... 69
Setting the TCP/IP .................................................. 70
Setting the Wireless LAN Channel .......................... 71
Setting the DHCP Server ......................................... 73
Resetting the Network Settings .............................. 74
Wireless LAN PC Card: Troubleshooting ........ 74
Using a Memory Card ....................................... 75
Displaying of the Contents in the Card
as an Index ........................................................... 75
Ejecting the Card .................................................... 75
Setting the Thumbnail Display ................................. 76
Setting Lists ............................................................. 77
Memory Card Settings ...................................... 78
Setting Files ............................................................. 78
Setting the Display Order of Files ............................ 78
Setting the Display Format of the Index Mode ........ 79
Using Autorun ......................................................... 79
Setting the Display Interval for Image Files ............. 80
Setting On-screen Display ............................... 92
Turning Off the On-screen Display .......................... 92
Setting the Video Signal ................................... 93
Saving Projected Images .................................. 94
Capturing the Image .............................................. 94
Deleting the Captured Image .................................. 94
Setting a Background Image ............................ 95
Selecting a Background Image .............................. 95
Selecting a Startup Image ................................ 95
Selecting a Startup Image ....................................... 95
Using an RGB Monitor Loop-out Adaptor ...... 96
Using an RGB Monitor Loop-out Adaptor ............... 96
Confirming the Lamp Usage Time ................... 96
Confirming the Lamp Usage Time .......................... 96
Displaying the Break Timer .............................. 97
Displaying and Setting the Break Timer ................. 97
To Cancel the Break Timer ..................................... 97
Reversing/Inverting Projected Images ............ 98
Setting the Projection Mode ................................... 98
Locking the Operation Buttons
on the Projector ........................................... 99
Setting up the Keylock ............................................ 99
Canceling the Keylock Setting ................................ 99
Displaying a Still Image .................................... 81
Setting up a Password .................................... 100
Pausing an Image .................................................. 81
Entering the Password ........................................... 100
Changing the Password ....................................... 101
If You Forget Your Password ................................. 101
Selecting the Picture Display Mode ................ 82
Switching the Picture Display Using Different Input
Signals .................................................................. 82
Displaying an Enlarged Portion of an Image ........... 84
Setting the Anti-Theft...................................... 102
Gamma Correction Function ............................ 86
Entering the Keycode ............................................ 102
Changing the Keycode ......................................... 104
Adjusting Gamma Correction .................................. 86
Initializing the Settings ................................... 105
Selecting the Power Save Mode ...................... 87
Returning to the Default Settings .......................... 105
Setting the Power Save Mode ................................. 87
Automatic Power Shutoff Function .......................... 87
Displaying the Adjustment Settings .............. 106
Displaying Dual Pictures (Pict in Pict) ............ 88
Displaying the Inset Picture ..................................... 88
Activating the sRGB Color
Management Function ................................ 89
Setting the Color Management Function (sRGB) .... 89
Auto Search Function ....................................... 90
Using Auto Search .................................................. 90
-6
Overview of All Menu Settings .............................. 106
Introduction
Appendix
Carrying the Projector .................................... 108
How to Use the Carrying Case .............................. 108
Maintenance .................................................... 109
Maintenance Indicators .................................. 110
Regarding the Lamp ....................................... 111
Lamp .................................................................... 111
Caution Concerning the Lamp .............................. 111
Replacing the Lamp .............................................. 111
Removing and Installing the Lamp Unit ............... 112
Resetting the Lamp Timer ..................................... 113
Connecting Pin Assignments ........................ 114
Computer Compatibility Chart ....................... 115
Troubleshooting .............................................. 116
For SHARP Assistance ................................... 118
Specifications .................................................. 119
Wireless LAN PC Card Specifications .......... 120
Usable Cards and Their Capacity .................. 121
Dimensions ...................................................... 122
Glossary ........................................................... 123
Index ................................................................. 125
-7
IMPORTANT SAFEGUARDS
CAUTION: Please read all of these instructions before you operate this product and save these
instructions for later use.
Electrical energy can perform many useful functions. This product has been engineered and manufactured to
assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARDS. In order not to defeat the safeguards incorporated in this product, observe the following basic
rules for its installation, use and servicing.
1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions
The safety and operating instructions should be
retained for future reference.
3. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions
All operating and use instructions should be followed.
5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
6. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this product near water–for example, near
a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8. Accessories
Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer,
or sold with the product. Any mounting of the product
should follow the manufacturer’s instructions, and
should use a mounting accessory recommended by
the manufacturer.
9. Transportation
A product and cart combination
should be moved with care. Quick
stops, excessive force, and
uneven surfaces may cause the
product and cart combination to
overturn.
10.Ventilation
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product
and to protect it from overheating, and these openings
must not be blocked or covered. The openings should
never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
-8
11. Power Sources
This product should be operated only from the type of
power source indicated on the marking label. If you
are not sure of the type of power supply to your home,
consult your product dealer or local power company.
For products intended to operate from battery power,
or other sources, refer to the operating instructions.
12. Grounding or Polarization
This product is provided with one of the following types
of plugs. If the plug should fail to fit into the power outlet,
please contact your electrician.
Do not defeat the safety purpose of the plug.
a. Two-wire type (mains) plug.
b. Three-wire grounding type (mains) plug with a
grounding terminal.
This plug will only fit into a grounding type power
outlet.
13. Power-Cord Protection
Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point
where they exit from the product.
14. Lightning
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the cable system. This will prevent damage
to the product due to lightning and power-line surges.
15. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of
fire or electric shock.
16. Object and Liquid Entry
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
17. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Introduction
18. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to normal operation.
e. If the product has been dropped or damaged in
any way.
f. When the product exhibits a distinct change in
performance, this indicates a need for service.
19. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
20. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
21. Wall or Ceiling Mounting
This product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
22. Heat
This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
-9
IMPORTANT SAFEGUARDS (cont.)
INTELLECTUAL PROPERTY RIGHTS
IMPORTANT
READ BEFORE USING THE PRODUCT
• You have acquired a product that includes software licensed to SHARP Corporation by Lineo, Inc. (“Lineo”).
The Software is protected by copyright laws, international copyright treaties, and other intellectual property laws and treaties. Lineo and its suppliers retain all ownership of, and intellectual property rights in
(including copyright), the Software components and all copies thereof, provided however, that certain
components of the Software are components licensed under the GNU General Public License (version
2), which Lineo supports. You may obtain a copy of the GNU General Public License at http://www.fsf.org/
copyleft/gpl.html. Lineo will provide source code for any of the components of the Software licensed
under the GNU General Public License. To obtain such source code, send email to [email protected]
• OS: Embedix (Embedded Linux) EmbedixTM is a registered trademark of U.S.A. LINEO, Inc.
• DLP™ (Digital Light Processing) and DMD™ (Digital Micromirror Device) are trademarks of Texas Instruments, Inc.
• Microsoft and Windows are registered trademarks of Microsoft Corporation, in the United States and/or
other countries.
• PC/AT is a registered trademark of International Business Machines Corporation in the United States.
• Adobe Acrobat is a trademark of Adobe Systems Incorporated.
• Macintosh is a registered trademark of Apple Computer, Inc. in the United States and/or other countries.
• All other company or product names are trademarks or registered trademarks of their respective companies.
• Some IC chips in this product include confidential and/or trade secret property belonging to Texas Instruments. Therefore you may not copy, modify, adapt, translate, distribute, reverse engineer, reverse assemble or discompile the contents thereof.
-10
Caution concerning the lamp unit
■ Potential hazard of glass
particles if lamp ruptures. In
case of lamp rupture, contact
your nearest Sharp Authorized Projector Dealer or Service Center for a replacement.
See “Replacing the Lamp” on
page 111.
Do not subject the projector to hard
impact and/or vibration.
■ Take care with the lens so as not to hit or
damage the surface of the lens.
Rest your eyes occasionally.
CAUTION
PRECAUCI N
PR CAUTION
BQC-PGM20X//1
Cautions concerning the setup of the
projector
■ For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area free from
humidity, dust and cigarette smoke. When the
projector is subjected to these environments,
the lens must be cleaned more often. As long
as the projector is regularly cleaned, use in
these environments will not reduce the overall
operation life of the unit. Internal cleaning
should only be performed by a Sharp Authorized Projector Dealer or Service Center.
■ Continuously watching the screen for long
hours will make your eyes tired. Be sure to
rest your eyes sometimes.
Avoid locations with high or low temperature.
■ The operating temperature for the projector
is from 41°F to 95°F (+5°C to +35°C)
■ The storage temperature for the projector is
from –4°F to 140°F (–20°C to +60°C)
Do not block the exhaust and intake
vents.
■ Position the screen so that it is not in direct
sunlight or room light. Light falling directly on
the screen washes out the colors, making
viewing difficult. Close the curtains and dim
the lights when setting up the screen in a
sunny or bright room.
■ Allow at least 11.8 inches (30 cm) of space
between the exhaust vent and the nearest
wall or obstruction.
■ Be sure that the intake vent and the exhaust
vent are not obstructed.
■ If the cooling fan becomes obstructed, a protection circuit will automatically turn off the
projector. This does not indicate a malfunction. Remove the projector power cord from
the wall outlet and wait at least 10 minutes.
Place the projector where the intake and
exhaust vents are not blocked, plug the power
cord back in and turn on the projector. This
will return the projector to the normal operating condition.
The projector may safely be tilted to
a maximum angle of 10 degrees.
Cautions regarding the transportation of the projector
Do not set up the projector in places
exposed to direct sunlight or bright
light.
■ Placement should be
within ±10 degrees.
10
10
■ When transporting the projector, be sure not
to subject it to hard impact and/or vibration,
as this can result in damage. Take extra
caution with the lens. Before moving the
projector, be sure to retract the antenna and
the eject button. Also, be sure to unplug the
power cord from the wall outlet, disconnect
any other cables connected to it.
-11
Introduction
Be sure to read the following safeguards when setting up
your projector.
IMPORTANT SAFEGUARDS (cont.)
Other connected equipment
■ When connecting a computer or other audiovisual equipment to the projector, make the
connections AFTER turning off the projector
and the equipment to be connected.
■ Please read the operation manuals of the projector and the equipment to be connected for
instructions on how to make the connections.
Using the projector in other countries
■ The power supply voltage and the shape of
the plug may vary depending on the region
or country you are using the projector in.
When using the projector overseas, be sure
to use the appropriate power cord for the
country you are in.
Temperature monitor function
■ If the projector starts to
overheat due to setup problems or blockage of the air
vents, “ ” and “
” will
blink in the lower left corner of the picture. If
the temperature continues to rise, the lamp
will turn off, the TEMPERATURE WARNING
indicator on the projector will blink, and after
a 90-second cooling-off period the power will
shut off. Refer to “Maintenance Indicators”
on page 110 for details.
Info
• The cooling fan regulates the internal temperature, and its performance is automatically
controlled. The sound of the fan may change
during projector operation due to changes in
the fan speed. This does not indicate malfunction.
• Do not unplug the power cord during
projection or cooling fan operation. This can
create damage due to the rise in internal
temperature, as the cooling fan also stops.
-12
PDF operation manuals in several languages are included in the CD-ROM, so that you can
work with the projector, even if you do not have this manual on hand. To utilize these manuals,
you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have
not installed Acrobat Reader yet, you can install it from the CD-ROM.
To Install Acrobat Reader from the CD-ROM
For Windows:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “My Computer” icon.
3 Double click the “CD-ROM” drive icon.
4 Double click the “acrobat” folder.
5 Double click the “windows” folder.
6 Double click the language (name of the folder)
that you want to view.
7 Double click the installation program and follow
the instructions on the screen.
For Macintosh:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “CD-ROM” icon.
3 Double click the “acrobat” icon.
4 Double click the language (name of the folder)
that you want to view.
5 Double click the desired installation program
and follow the instructions on the screen.
For other operating systems:
Please download Acrobat Reader from the Internet (http://www.adobe.com)
For other languages:
If you prefer using Acrobat Reader for languages other than those included in the CD-ROM, please
download the appropriate version from the Internet.
Accessing the PDF Manuals
For Windows:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “My Computer” icon.
3 Double click the “CD-ROM” drive.
4 Double click the “manuals” folder.
5 Double click the language (name of the folder)
that you want to view.
6 Double click the “m25x” pdf file to access the
projector manuals.
Double click the “soft” pdf file to access the
Wireless Reality software manual.
Double click the “wc11b” pdf file to access the
Wireless LAN PC Card manual.
For Macintosh:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “CD-ROM” icon.
3 Double click the “manuals” folder.
4 Double click the language (name of folder) that
you want to view.
5 Double click the “m25x” pdf file to access the
projector manuals.
Note
• If the desired pdf file cannot be opened by double clicking the mouse, start Acrobat Reader first, then specify
the desired file using the “File”, “Open” menu.
• See the “readme.txt” file on the CD-ROM for important information not included in this operation manual.
-13
Introduction
How to Access the PDF Operation Manuals
(Windows, Macintosh)
Part Names
Numbers in
refer to the main pages in this Operation Manual where the topic is explained.
Projector (Front and Top View)
110 TEMPERATURE
110
LAMP replacement
indicator
warning indicator
Illuminates in green normally.
Replace the lamp when the
indicator blinks in red.
POWER indicator
When the internal
temperature rises, this
indicator will illuminate in
red.
34
Illuminates in red, when the
projector is in standby. When
the power is turned on, this
indicator will illuminate in
green.
35
For switching input mode
1, 2, 3 or 4.
50
34
POWER button
38
35
51
51
51
63
For setting items selected or
adjusted on the menu.
For temporarily turning off the
sound and picture.
GyroRemote
Antenna
40
Zoom knob
37
Foot releases/Adjustment 22
feet
For adjusting the projector’s
height.
-14
AUTO SYNC button
For automatically
adjusting images when
connected to a computer.
36
AV MUTE button
UNDO button
For undoing an operation
or returning to the default
settings.
For selecting menu items.
ENTER button
VOLUME buttons
For adjusting the speaker
sound level.
For adjusting Keystone or
Digital Shift setting.
Adjustment buttons
"'\ |
("'\
|)
MENU button
For displaying adjustment
and setting screens.
Turns the power on or off.
LENS button
INPUT button
Attaching the terminal cover
Attach the terminal cover by
placing it on the side panel of the
projector and pressing it into
place, as shown in the illustration.
37
Focus ring
14
32
35
Speaker
18
Remote control
sensor
Terminal cover
Introduction
Projector (Side View)
INPUT 1 terminal
INPUT 3 terminal
27
INPUT AUDIO terminal
For connecting video
equipment.
Shared audio terminal for
INPUT 1, INPUT 2,
INPUT 3 and INPUT 4.
27
DVI Port for DVI digital,
analog RGB, and COMPONENT signals.
INPUT 2 terminal
30
47
USB port
48
Wired remote contorl
input terminal (ø3.5 mm
minijack)
31
INPUT 4 PC card slot
For connecting a computer
using a USB cable.
30
Terminal for connecting video
equipment with an S-VIDEO
terminal.
AC socket
26
Exhaust vent
11
Kensington Security
Standard connector
15
For inserting a wireless
LAN PC card or a memory
card.
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
Attaching the lens cap
After putting the lens cap strap on the lens cap, pass
the other end of the strap through the hole under the
projector, next to the lens, as shown in the illustration.
Bottom View
-15
Part Names (cont.)
GyroRemote
Front
Function 1 / 2 buttons
For specifying the button assignments
for Function 1 and Function 2
INPUT button
For switching between inputs 1,2,3
and 4.
L-CLICK/ ENTER button
For entering menu items or to perform
a left click when using the
wireless mouse.
POWER button
42
LED indicator
44
POINTER button
47
R-CLICK / UNDO button
54
MENU button
35
VOLUME buttons
41
35
47
34
For turning the power on or off.
LENS button
For adjusting Keystone or Digital Shift
setting.
Function 3 / 4 buttons
For registering the GyroRemote in the
projector.
43
For undoing an operation or to
perform a right click when using the
wireless mouse.
For displaying adjustment and
setting screens.
41
ASSIGN button
42
RF CH+ button
41
TEACH (OK) button
Holding this button down displays a
pointer on the screen.
For adjusting the speaker sound
level.
38
For specifying the button assignments
for Function 3 and Function 4
Lights up when the GyroRemote is in
motion.
Switches the button assignment
function group.
For checking the current RF channel
as well as switching the channel.
Rear
Bottom
48 Wired remote
44 GYRO ACTIVE button
For moving the Gyro
function for actions such
as moving tool icons
(such as stamp), selecting
menus in the OSD, or
moving the cursor using
the wireless mouse.
WIRE R/C JACK
terminal
(ø2.5 mm
minijack)
Gyration U.S. Patents
5698784, 5825350, 5898421
-16
The GyroRemote
Introduction
Inserting the Batteries
The batteries (four R-03 batteries (“AAA” size, UM/
SUM-4, HP-16 or similar)) are included in the package.
1
Slide the cover in the direction
of the arrow to open it.
2
Insert the included batteries.
• Insert the batteries making sure the poand
larities correctly match the
marks inside the battery compartment.
Pullstring for
removing the
batteries
Info
• When inserting the batteries into the battery compartment of the GyroRemote, make sure that the
batteries are placed over the pullstring for easy removal in the future.
If not, it may be difficult to remove old batteries when
they have to be replaced.
3
Slide the cover in the direction
of the arrow to close it.
Note
• GyroRemote Sleep Function
To avoid battery consumption, the GyroRemote
automatically enters the Sleep mode if not action
takes place within 5 minutes. If the GyroRemote
cannot be operated, press once
on the
GyroRemote to resume operation.
Replacing the Batteries
LED
indicator
The LED indicator will blink when the
batteries need to be replaced.
• Make sure to replace the batteries with new
batteries as soon as possible when the LED
indicator starts to blink.
• Be sure to use alkaline batteries.
Note
• If GyroRemote is idle for five minutes, it will go
into sleep mode to conserve battery life. Pressing any button will make GyroRemote up.
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Caution
• Insert the batteries making sure the polarities correctly match the
and
marks inside the battery compartment.
• Batteries of different types have different properties, therefore do not mix batteries of different types.
• Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
• Remove the batteries from the remote control once they have run out, as leaving them can cause them to leak.
Battery fluid from leaked batteries is harmful to your skin, therefore be sure to first wipe them and then remove them using a cloth.
• The batteries included with this projector may be exhausted over a short period, depending on how they are kept. Be sure to
replace them as soon as possible with new batteries.
• Remove the batteries from the GyroRemote if you will not be using the remote control for a long time.
-17
The GyroRemote (cont.)
GyroRemote Features
This projector uses the GyroRemote technology, that allows for the following features when compared to
ordinary infrared remote controls.
RF Technology
Operation Range:
Area up to a 59.1 feet (18 m)
With ordinary remote controls, the operation range is limited
because of directivity; they cannot operate if there are objects
between the projector and the remote.
The GyroRemote can operate up to a range of 59.1 feet (18 m) by
sending RF signals to the projector.
Note
• The control range measured is with the projector’s antenna fully extended.
• The control range under actual operating conditions may be less than optimum depending on where the
projector is placed.
Caution
Do not use the GyroRemote in restricted places, such as hospitals.
• Signals from the GyroRemote may affect electronic equipment or medical electronic equipment, thereby
causing accidents.
• When using the GyroRemote in medical institutions, make sure to follow the directives of each institution.
Multi-Projector Control
This projector has a GyroRemote identification function that makes possible to perform various operations
such as the ones below.
■ No interference even if other projectors of the same type are within the GyroRemote’s operating range.
■ Multiple projectors can be operated with one GyroRemote.
■ One projector can be operated using multiple GyroRemotes.
• Refer to page 40 for details about using the GyroRemote.
-18
Using the GyroRemote
Introduction
Info
• The GyroRemote emit s operation signals
according to the angle and change of
angle of the GyroRemote.
• You can smoothly operate the
GyroRemote just by turning your wrist.
• The movements of the GyroRemote send
signals to the projector while holding down
on the rear of the GyroRemote.
• If
is not held down, the movements
of the GyroRemote do not send signals
to the projector.
• If
is pressed twice, the GyroRemote
will continuously send signals to the
projector. Pressing
again will return
the GyroRemote to its normal condition.
Calibrating the
GyroRemote
If there are any extreme temperature changes
when the GyroRemote is being used or after
batteries have been replaced, the mouse
cursor or pointer may continue to move by
itself even if no action has been performed. In
this case, calibrate the GyroRemote using the
following procedure.
1
Press
on the rear of the
GyroRemote twice.
2
Make sure that the LED
indicator is lit, and place the
GyroRemote on a leveled
location.
GYRO ACTIVE
button
• After leaving the GyroRemote for 6
seconds, the calibration of the
GyroRemote is complete.
3
Press
, after leaving the
GyroRemote for more than 6
seconds.
• Calibration is complete after the
remote has been left for more than 6
seconds.
-19
Accessories
Supplied accessories
GyroRemote
(1) For U.S., Canada, etc.
RRMCG1631CESA
(2) For Europe, Australia,
Oceania and Asia
RRMCG1653CESA
Power cord (6' (1.8m))
(1)
For U.S., Canada, etc.
QACCDA007WJPZ
Four R-03 batteries
Two Wireless LAN PC cards
(“AAA” size, UM/SUM-4, AN-WC11B
HP-16 or similar)
(RUNTKA025WJZZ)
(2)
(4)
(3)
For Europe, except U.K. For U.K. and Hong Kong
QACCV4002CEZZ
QACCB5024CENA
For Australia, New
Zealand and Oceania
QACCL3022CEZZ
Note
• Depending on the region, projectors only ship with one power cord (see above). Use the power cord that
corresponds to the wall outlet in your country.
DVI to 15-pin D-sub
cable (6' (1.8m))
QCNWGA010WJZZ
USB cable
(6' (1.8 m))
QCNWG0001WJPZ
Carrying case
GCASN0005CESA
CD-ROM
UDSKAA001WJZZ
Lens cap
(attached)
CCAPHA001WJ01
Lens cap strap
UBNDT0013CEZZ
Operation manual
(this manual)
Quick reference guides
Terminal cover
(attached)
GCOVD0103CESA
Wireless Reality software
operation manual
TINS-A049WJZZ
Wireless LAN PC Card
operation manual
TINS-A306WJZZ
Optional accessories
DVI cable (9'10'' (3.0 m))
AN-C3DV
3 RCA to 15-pin D-sub cable (9'10'' (3.0 m)) AN-C3CP
Computer RGB cable (32'10'' (10.0 m))
AN-C10BM
<for IBM-PC, PC9821, and PC98NX systems>
AN-C10PC
<for PC98 systems (Except PC9821 and PC98NX systems)>
5 BNC to 15-pin D-sub cable (9'10'' (3.0 m)) AN-C3BN
RGB monitor loop-out adaptor (7.9'' (20 cm)) AN-A1MY
DVI to 15-pin D-sub adaptor (7.9'' (20 cm)) AN-A1DV
• If your computer output terminal has a different connection, it may be necessary to purchase an adaptor
(commercially available).
Wireless LAN PC card
AN-WC11B
Note • All cables may not be available in all regions. Please check with your nearest Sharp Authorized
Projector Dealer or Service Center.
-20
Setup and Connections
Setup and Connections
Setup
Foot releases
Adjustment feet
Using the Adjustment
Feet
The height of the projector can be adjusted
using the adjustment feet when the surface
of the projector is placed on is uneven or when
the screen is slanted.
The projection of the image can be made
higher by adjusting the projector when it is in
a location lower than the screen.
1
Press the foot releases.
2
Lift the projector to adjust its
height and remove your hands
from the foot releases.
3
Rotate the adjustment feet to
make minor changes.
Up
Note
• When returning the projector to its original position, hold the projector firmly, press
the foot releases and then lower it.
• The projector is adjustable up to approximately 5.5 degrees from the standard position.
Info
• Do not press the foot releases when the
feet are extended without firmly holding
the projector.
• Do not hold the lens when lifting or lowering the projector.
• When lowering the projector, be careful not
to get your fingers caught in the area between the adjustment feet and the projector.
-22
Down
Setting up the Screen
Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.
Note
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screen
according to the desired picture size. (See page 24.)
Example of Standard Setup
• The distance from the screen to the projec-
Side View
tor may vary depending on the size of the
screen.
P.24
• The default setting can be used, when plac-
90°
Audience
Top View
ing the projector in front of the screen. If the
projected image is reversed or inverted, readjust the setting to “Front” in “PRJ Mode”.
P.98
• Place the projector so that an imaginary
horizontal line that passes through the center
of the lens is perpendicular to the screen.
90°
-23
Setup and Connections
• The projector lens should be centered in the middle of the screen. If the horizontal line passing through the
lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
• For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on
the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.
• A polarizing screen cannot be used with this projector.
Setup (cont.)
Screen Size and Projection Distance
Screen
Base line:
Horizontal line passing through
the lens center.
Lens center
90°
H
L:Projection distance
NORMAL Mode (4:3)
Picture (Screen) size
Diag. (X)
Width
Projection distance (L)
Height
Maximum (L1)
Minimum (L2)
–
Distance from the lens
center to the bottom
of the image (H)
300" (762 cm)
240" (610 cm)
180" (457 cm)
39' 5" (12.0 m)
0"
(0.0 cm)
250" (635 cm)
200" (508 cm)
150" (381 cm) 39' 8" (12.1 m) 32' 10" (10.0 m)
0"
(0.0 cm)
200" (508 cm)
160" (406 cm)
120" (305 cm) 31' 9" (9.7 m)
26' 3" (8.0 m)
0"
(0.0 cm)
150" (381 cm)
120" (305 cm)
90" (229 cm) 23' 9" (7.2 m)
19' 8" (6.0 m)
0"
(0.0 cm)
100" (254 cm)
80" (203 cm)
60" (152 cm) 15' 10" (4.8 m)
13' 1" (4.0 m)
0"
(0.0 cm)
84" (213 cm)
67" (170 cm)
50" (127 cm) 13' 3" (4.0 m)
10' 11" (3.3 m)
0"
(0.0 cm)
72" (183 cm)
58" (147 cm)
43" (109 cm) 11' 4" (3.5 m)
9' 4" (2.9 m)
0"
(0.0 cm)
60" (152 cm)
48" (122 cm)
36" (91 cm)
9' 5" (2.9 m)
7' 9" (2.4 m)
0"
(0.0 cm)
40" (102 cm)
32" (81 cm)
24" (61 cm)
6' 3" (1.9 m)
5' 2" (1.6 m)
0"
(0.0 cm)
The formula for picture size and
projection distance
L1 (ft)
= (0.048539X – 0.037278) / 0.3048
L2 (ft)
= (0.040172X – 0.037561) / 0.3048
H (in) = 0
X:
L:
L1:
L2:
H:
Picture size (diag.) (in)
Projection distance (m)
Maximum projection distance (ft)
Minimum projection distance (ft)
Distance from the lens center to
the bottom of the image (in)
STRETCH Mode (16:9)
Picture (Screen) size
Diag. (X)
Width
Projection distance (L)
Height
Maximum (L1)
–
Minimum (L2)
Distance from the lens
center to the bottom
of the image (H)
250" (635 cm)
218" (554 cm)
123" (312 cm)
225" (572 cm)
196" (498 cm)
110" (279 cm) 38' 11" (11.9 m) 32' 2" (9.8 m)
35'9" (10.9 m) –20 27 / 64" (–51.9 cm)
–18 25 / 64" (–46.7 cm)
200" (508 cm)
174" (442 cm)
98" (249 cm) 34' 7" (10.5 m) 28' 7" (8.7 m)
–16 22 / 64" (–41.5 cm)
150" (381 cm)
131" (333 cm)
74" (188 cm) 25' 11" (7.9 m)
21' 5" (6.5 m)
–12 16 / 64" (–31.1 cm)
133" (338 cm)
116" (295 cm)
65" (165 cm) 22' 11" (7.0 m)
18' 12" (5.8 m)
–10 56 / 64" (–27.6 cm)
106" (269 cm)
92" (234 cm)
52" (132 cm) 18' 3" (5.6 m)
15' 1" (4.6 m)
–8 42 / 64" (–22.0 cm)
100" (254 cm)
87" (221 cm)
49" (124 cm) 17' 3" (5.3 m)
14' 3" (4.3 m)
–8 11 / 64" (–20.8 cm)
92" (234 cm)
80" (203 cm)
45" (114 cm) 15' 10" (4.8 m)
13' 1" (4.0 m)
–7 33 / 64" (–19.1 cm)
84" (213 cm)
73" (185 cm)
41" (104 cm) 14' 5" (4.4 m)
11' 11" (3.6 m)
–6 55 / 64" (–17.4 cm)
72" (183 cm)
63" (160 cm)
35" (89 cm)
12' 4" (3.8 m)
10' 3" (3.1 m)
–5 57 / 64" (–14.9 cm)
60" (152 cm)
52" (132 cm)
29" (74 cm)
10' 3" (3.1 m)
8' 6" (2.6 m)
–4 58 / 64" (–12.5 cm)
40" (102 cm)
35" (89 cm)
20" (51 cm)
6' 10" (2.1 m)
5' 7" (1.7 m)
–3 17 / 64" (–8.3 cm)
The formula for picture size and
projection distance
L1 (ft)
= (0.052882X – 0.037278) / 0.3048
L2 (ft)
= (0.043766X – 0.037561) / 0.3048
H (in) = –0.08171X
BORDER Mode (4:3)
Picture (Screen) size
Diag. (X)
Width
Projection distance (L)
Height
Maximum (L1)
–
Minimum (L2)
Distance from the lens
center to the bottom
of the image (H)
200" (508 cm)
160" (406 cm)
120" (305 cm)
180" (457 cm)
144" (366 cm)
108" (274 cm) 38' 1" (11.6 m) 31' 6" (9.6 m)
35' 0" (10.7 m) –20"
–18"
(–50.8 cm)
(–45.7 cm)
150" (381 cm)
120" (305 cm)
90" (229 cm) 31' 9" (9.7 m)
26' 3" (8.0 m)
–15"
(–38.1 cm)
100" (254 cm)
80" (203 cm)
60" (152 cm) 21' 1" (6.4 m)
17' 5" (5.3 m)
–10"
(–25.4 cm)
84" (213 cm)
67" (170 cm)
50" (127 cm) 17' 9" (5.4 m)
14' 8" (4.5 m)
–8 26 / 64" (–21.3 cm)
–7 13 / 64" (–18.3 cm)
72" (183 cm)
58" (147 cm)
43" (109 cm) 15' 2" (4.6 m)
12' 6" (3.8 m)
60" (152 cm)
48" (122 cm)
36" (91 cm)
12' 7" (3.8 m)
10' 5" (3.2 m)
–6"
(–15.2 cm)
40" (102 cm)
32" (81 cm)
24" (61 cm)
8' 4" (2.6 m)
6' 11" (2.1 m)
–4"
(–10.2 cm)
The formula for picture size and
projection distance
L1 (ft)
= (0.064719X – 0.037278) / 0.3048
L2 (ft)
= (0.053563X – 0.037561) / 0.3048
H (in) = 0.100X
Note
• There is an error of ± 3% in the formula above.
• Values with a minus (–) sign indicate the distance of the lens center below the bottom of the image.
-24
Projecting a Reversed/Inverted Image
Projection from behind the screen
■ Place a translucent screen between the projector and the
audience.
■ Reverse the image by setting “Rear” in “PRJ Mode”. See
page 98 for use of this function.
When using the default setting.
▼On-screen Display
Setup and Connections
Projection using a mirror
■ Place a mirror (normal flat type) in front of the lens.
■ Reverse the image by setting “Rear” in “PRJ Mode”, when the
mirror is placed on the audience side. See page 98 for use of
this function.
The image is reversed.
When using the default setting.
▼On-screen Display
Info
• When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of
the audience.
The image is reversed.
Ceiling-mount setup
■ It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately.) (ANPGCM90 ceiling-mount bracket, its AN-EP101B extension tube
and AN-JT200 universal bracket, adaptor for non-level ceiling
installation (for U.S.A.), BB-M20T ceiling adaptor, its BBNVHOLDER280, BB-NVHOLDER550, BB-NVHOLDER900
ceiling mount systems (for GERMANY), or AN-60KT ceilingmount bracket, its AN-TK301/AN-TK201 and AN-TK302/ANTK202 extension tubes (for countries other than the U.S.A. and
GERMANY))
■ Be sure to adjust the position of the projector to match the distance (H) from
the lens center position (see page 24)
to the lower edge of the image, when
mounting the projector on
the ceiling.
■ Invert the image by
setting “Ceiling + Front”
in “PRJ Mode”.
When using the default setting.
▼On-screen Display
The image is inverted.
-25
Connecting the Projector to Other Devices
Before Connecting
Note
• Before connecting, be sure to turn off both the projector and the devices to be connected. After making all
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that the computer is the last device to be turned on after all the
connections are made.
• Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
A computer using:
■ A DVI to 15-pin D-sub cable (See page 27.)
■ A DVI cable (type AN-C3DV) (sold separately)
(See page 28.)
■ A wireless LAN PC card (See page 68.)
Component video or audio-visual equipment:
■ A DVD player or DTV* decoder (See page 29.)
■ A VCR, Laser disc player or other audio-visual equipment
(See page 30.)
*DTV is the umbrella term used to describe the new digital television
system in the United States.
A monitor using:
■ An RGB monitor loop-out adaptor (AN-A1MY) (sold separately) and an RGB cable (commercially available). (See
page 32.)
Connecting the Power
Cord
1
-26
Plug in the supplied power
cord into the AC socket on the
rear of the projector.
Supplied
accessory
Power cord
Connecting the Projector to a Computer
Connecting to a Computer
Using the DVI to 15-pin
D-sub Cable
DVI to 15-pin
D-sub cable
To RGB Output port
To Audio Output port
Connect the projector to the
computer using the supplied
DVI to 15-pin D-sub cable.
Setup and Connections
1
Supplied
accessory
Notebook computer
• Secure the connectors by tightening
the thumbscrews.
2
To input audio signal, connect
the projector to the computer
using a ø3.5 mm stereo audio
cable (commercially available
or available as Sharp service
part QCNW-4870CEZZ).
2 ø3.5 mm stereo audio
cable (commercially
available or available as
Sharp service part
QCNW-4870CEZZ)
1 DVI to 15-pin D-sub cable
Note
• See page 115 “Computer Compatibility
Chart” for a list of computer signals compatible with the projector. Use with computer signals other than those listed may
cause some of the functions not to work.
• When connecting the projector to a computer in this way, select “RGB” for “Signal
Type” in the “Picture” menu. See page 59.
• A Macintosh adaptor may be required for
use with some Macintosh computers. Contact your nearest Shar p Authorized
Projector Dealer or Service Center. See
page 118.
Connecting the thumbscrew cables
■ Connect the thumbscrew cable making sure that it
fits correctly into the port. Then, firmly secure the
connectors by tightening the screws on both sides
of the plug.
■ Do not remove the ferrite core attached to the DVI
to 15-pin D-sub cable.
Ferrite core
-27
Connecting the Projector to Other Devices (cont.)
Connecting to a
Computer Using a DVI
Cable (Sold Separately)
This projector comes installed with a DVI digital input terminal in which computer digital image signals can be directly input.
1
Connect the projector to the
computer using the DVI cable.
2
To input audio signal, connect
the projector to the computer
using a ø3.5 mm stereo audio
cable (commercially available
or available as Sharp service
part QCNW-4870CEZZ).
DVI cable
Type: AN-C3DV
(9'10" (3.0 m))
Optional
accessory
To DVI Digital Output port
To Audio
Output port
Desktop computer
2 ø3.5 mm stereo
audio cable
(commercially
(sold separately) available or available
as Sharp service part
QCNW-4870CEZZ)
1 DVI cable
Note
• This DVI input port is DVI version 1.0 compatible. Therefore when the signal is input from copy guard system compatible
(DVI version 2.0) equipment, no signal will
be received.
“Plug and Play” function (when connecting to a 15-pin terminal)
■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer will communicate their setting requirements, allowing for quick and easy setup.
■ Before using the “Plug and Play” function, be sure to turn on the projector first and the connected
computer last.
Note
• The DDC “Plug and Play” function of this projector operates only when used in conjunction with a
VESA DDC compatible computer.
-28
Connecting to Video Equipment
Connecting to
Component Video
Equipment
Optional
accessories
* DTV is the umbrella term used to describe
the new digital television system in the United
States.
1
2
Connect the 3 RCA to 15-pin Dsub cable using the DVI to 15pin D-sub adaptor.
DVI to 15-pin
D-sub adaptor
Model: AN-A1DV
(7.9" (20 cm))
Setup and Connections
Use a 3 RCA to 15-pin D-sub cable and DVI to
15-pin D-sub adaptor when connecting to the
INPUT 1 terminal, component video equipment
such as DVD players and DTV* decoders.
3RCA to 15-pin
D-sub cable
Type: AN-C3CP
(9'10" (3.0 m))
To analog component
output terminal
To audio output terminal
3 ø3.5 mm to RCA audio
DVD player or
DTV* decoder
cable (commercially
available)
Use the above cables to connect the projector and the
video equipment.
2 3 RCA to 15-pin
3
Connect the projector and the
video equipment using a ø3.5
mm to RCA audio cable
(commercially available).
1 DVI to 15-pin
D-sub adaptor
(sold separately)
D-sub cable
(sold separately)
Note
• When connecting the projector to the
video equipment in this way, select “Component” for “Signal Type” in the “Picture”
menu. See page 59.
• A ø3.5 mm stereo minijack to RCA audio
cable (commercially available) is required
for audio input.
-29
Connecting the Projector to Other Devices (cont.)
Connecting to Video
Equipment Using an
S-VIDEO, a Composite
Video or an Audio Cable
Using an S-VIDEO, video, or audio cable, a VCR,
laser disc player or other audio-visual
equipment can be connected to INPUT 2, INPUT 3 and AUDIO terminals.
1
2
Connect the projector to the
video equipment using an SVIDEO cable or a composite
video cable (both commercially
available).
To video output terminal
To audio output terminal
VCR or other audio-visual equipment
2 ø3.5 mm to RCA audio cable
(commercially available)
Connect the projector to the
video equipment using a
ø3.5 mm to RCA audio cable
(commercially available).
Note
• The S-VIDEO INPUT terminal uses a
video signal system in which the picture
is separated into color and luminance signals to produce a higher quality image.
To achieve a higher quality image, use a
commercially available S-VIDEO cable to
connect the S-VIDEO terminal on the projector and the S-VIDEO output terminal
on the video equipment.
• A ø3.5 mm minijack to RCA audio cable
(commercially available) is required for
audio input.
-30
To S-VIDEO output terminal
1 Composite video cable
(commercially available)
1 S-VIDEO cable (commercially available)
Installing / Removing the PC Card
Eject button
Installing the PC Card
in to INPUT 4 PC Card
Slot
Info
Setup and Connections
Insert a PC card such as a wireless LAN card
or memory card as shown on the right.
The notch
• We recommend that you recess the Eject
button before inserting the PC card.
This will prevent accidental ejection during
operation.
Make sure that the Eject
button is not out, and that
the notch on the card is to
the left, when installing the
card.
Take care when installing
the card, as it has both a
top part and an under part.
• The input mode will change automatically to
INPUT 4, when the PC card has been
inserted into INPUT 4 PC card slot.
Removing the PC Card
1
In the Card menu, select “Eject
PC Card”. For details see page
68.
Eject button
1 Press the Eject button.
2
The Eject button pops out.
Remove the card.
Press.
2 Press the Eject button
Note
• To prevent unstable operation, it is recommended that you use the Eject PC
Card function in “Card” menu before removing the PC card.
Info
Pops out.
Remove the card
from the slot and
store it in a safe
place. If the Eject
button is out, press
it once more to set
it back in place.
again. The PC Card will
protrude from the card slot
on the projector.
Press.
The card
comes out a
little.
• If the card is removed without selecting
“Eject PC Card” in step 1 above, the data
stored on the memory card may be lost,
or the PC card may be damaged.
• When you move the projector, make sure
to remove the card and that the Eject
button is not out. Moving the projector with
the Eject button being out might cause
damage to the projector.
-31
Connecting the Projector to Other Devices (cont.)
Connecting to a Monitor
Watching Images on
Both the Projector and
a Monitor
You can display computer images on both the
projector and a separate monitor using an RGB
monitor loop-out adaptor and an RGB cable.
RGB monitor loop-out
adaptor
Type: AN-A1MY
(7.9" (20 cm))
Optional
accessory
To RGB input port
Monitor
1
2
Connect the projector to the
computer and monitor using an
RGB monitor loop-out adaptor
(sold separately) and an RGB
cable (commercially available).
RGB cable
(commercially available)
1 RGB monitor loop-out adaptor
(sold separately)
In the “Options(1)” menu, select “Monitor Out” and then
“Yes (Y cable)”.
• If “Disable” is selected, the projected
image will be dimmer. This does not
indicate a malfunction. For details, see
page 96.
Black: to the monitor
Blue: to the computer
Notebook computer
Note
• When using an RGB monitor loop-out
adaptor (sold separately), make sure that
the cable is connected to the monitor.
• Analog RGB signals as well as Component
signals can be output to the monitor.
Info
• Only analog RGB/Component signals entered into the DVI port can be output to
the monitor.
Signals from equipment connected to the
DVI digital port cannot be output.
Using INPUT 1 Terminal
with the Terminal Cover
Attached to the
Projector
The INPUT 1 terminal can be used with the terminal cover folded as shown in the illustration.
-32
To RGB output port
Basic Operation
Basic Operation
Image Projection
▼Projector indicators
Basic Procedure
Connect the required external equipment to the projector before operating the following procedures.
Details are found in the projector operation manual.
LAMP REPLACEMENT indicator
POWER indicator
Info
• The language preset at the factory is English.
If you want to change the on-screen display
to another language, reset the language according to the procedure on page 37.
1
Plug the power cord into the wall outlet.
2
Press
• The POWER indicator illuminates up in red,
and the projector enters standby mode.
on the projector or
on the GyroRemote.
POWER button
• The POWER indicator illuminates in
green. After the LAMP REPLACEMENT
indicator illuminates, the projector is
ready to start operation.
INPUT
button
Volume
buttons
Note
• The LAMP REPLACEMENT indicator illuminates, indicating the status
of the lamp.
Green: The lamp is ready.
Green blinking: The lamp is
warming up.
Red blinking: The lamp should
be replaced soon.
Red: The lamp should be
replaced immediately.
• If the power is turned off and immediately switched on again, the LAMP
REPLACEMENT indicator may take
time to illuminate.
3
INPUT button
POWER button
When “Anti-Theft” (see page 102) is
set, the keycode input box will appear.
• Enter the keycode.
Volume button
Note
• When entering the keycode, press
the buttons previously set on the
projector or the GyroRemote.
Info
• When “Anti-Theft” is set, enter the
keycode or the input display will not appear. Even when the signal is input, the
display will not appear. (See page 102.)
-34
▼Keycode input box
4
"On-screen Display (Example)
Press
mode.
and select the input
INPUT 1 Mode
INPUT 2 Mode
• Each press switches in the following
order:
→ INPUT 1 → INPUT 2 → INPUT 3 → INPUT 4
• You can also use the
GyroRemote.
on the
Using
DVI digital
Note
Using S-Video
INPUT 3 Mode
• When no signal is received, “NO SIGNAL” will be displayed. When a signal
that the projector is not preset to
receive is input, “NOT REG.” will be
displayed.
• When Auto Search is ON, the input
modes with signals can be selected
(See page 90.)
• When a PC card is inserted, the input
will automatically change to INPUT 4.
• You can select the input mode directly
by using the Button Assign function
on the GyroRemote (See page 41.)
About the INPUT Modes
Using Video
INPUT 4 Mode
Using
Component
Memory card installed
Basic Operation
INPUT 1 Used for projecting images
(RGB/
from equipment that sends
Component) RGB signals or Component
signals connected to the DVIDIGITAL/ANALOG input port.
INPUT 2 Used for projecting images
(S-Video) from equipment connected to
the S-VIDEO input terminal.
INPUT 3 Used for projecting images
(Video)
from equipment connected to
the VIDEO input terminal.
INPUT 4 When projecting from a wire(PC Card) less LAN PC card or a
memory card.
Using
Analog RGB
• Transmission will be stopped if the input
is switched when a wireless LAN PC
card is installed in INPUT 4 and the
projector is connected to a computer.
5
Press
or
on the projector
to adjust the volume.
Note
• Pressing “+” will raise the volume.
Pressing “–” will lower the volume.
• On the GyroRemote, the volume can
be adjusted by pressing
.
• When a PC card is installed,
,
on the projector or
on the
GyroRemote operate as cursor
buttons (\, |) when the OSD menu
is active.
-35
Image Projection (cont.)
6
Press
on the projector to
temporarily turn off the picture
and sound.
Note
• Pressing
again will turn the picture and the sound back on.
• When using the GyroRemote, you
can select AV MUTE using the
Button Assign function (see
page 41.)
• If you want to temporarily mute the
sound using the GyroRemote,
select MUTE using the Button
Assign function (see page 41.)
7
Press
on the projector or
on the GyroRemote.
When the confirmation screen
is displayed, press
or
once again.
Note
• If you accidentally pressed
or
and do not want to turn off
the power, wait until the confirmation message disappears.
Info
• Do not unplug the power cord during projection or cooling fan operation. This can cause damage due to
the rise in internal temperature, as
the cooling fan also stops.
• When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment connected first and then to the projector.
-36
POWER button
MENU
button
Volume
buttons
AV MUTE
button
Selecting the On-screen
Display Language
• The on-screen display language of the projector can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese.
• The following explanation uses operations
from the projector as example.
1
Press
2
Press
or
“Language”.
3
Press
or
to select
the desired language, and then
.
press
4
Press
.
• The menu will be displayed.
to select
.
Adjusting the Lens
Basic Operation
• The desired language will be set as
the on-screen display.
Zoom knob
The image is focused and adjusted to the
desired size using the focus ring or zoom
knob on the projector.
1
The focus is adjusted by rotating the focus ring.
2
Zooming is adjusted by moving the zoom knob.
Focus ring
Zoo
mo
ut
m in
Zoo
-37
Correcting the Trapezoidal Distortion (Keystone Correction)
Correcting the Trapezoidal Distortion
This function allows for Keystone (On-screen
Trapezoidal Distortion) Correction.
The following explanation uses operations
from the projector as example.
LENS button
Adjustment
buttons
("'\ |)
Note
• When the image is projected either from
top or from bottom towards the screen at
an angle, the image becomes distorted
trapezoidally.
The function for correcting the trapezoidal
distortion is called Keystone Correction.
• The Keystone Correction can be adjusted
up to angle of approximately ± 35 degrees.
• Do not tilt the projector under 10 degrees.
1
Press
2
Press
or
to
adjust the Keystone correction.
UNDO
button
ENTER button
Normal screen
Keystone Correction screen
.
• Pressing
again while the BORDER,
STRETCH or SMART STRETCH
screen is displayed will start the Digital
Shift function. See page 39.
• You can also use
on the
GyroRemote.
• If you want to make more detailed corrections, press
to display the test
pattern, and then press
or
to make the adjustments.
• Adjustments can also be done using
or
button on the
the
GyroRemote.
Compresses upper side.
Compresses lower side.
Note
• Since the trapezoidal distortion of
the image can be corrected up to
an angle of approximately ±35 degrees, the actual screen can be diagonally set up to that angle as well.
to cancel Keystone
• Press
Correction.
• You can delete using the
button
on the GyroRemote.
-38
3
Press
.
Note
• You can use the same settings used
in NORMAL mode 4:3 for 16:9.
• Straight lines or the edges of images
may appear jagged while adjusting
the image.
Digital Shift Setting
For easier viewing, this function shifts the entire image projected on
the screen up or down when projecting 16:9 images from DVD
players and DTV* decoders.
* DTV is the umbrella term used to describe the new digital television
system in the United States.
Press
to move the
projected image upwards.
Press
image.
Note
When using the GyroRemote:
• You can use the
button to move the screen up or down.
• Press
Basic Operation
UNDO button
to reset the
Press
to move the
projected image
downwards.
Press
image.
to reset the
to return to the original position.
∗ The Digital Shift function works with BORDER, STRETCH or SMART STRETCH screen. For details,
see page 83.
-39
Using the GyroRemote
Before Using the GyroRemote
Make sure that the antenna on the projector
is fully extended before operating the projector
with the GyroRemote.
Info
• The control range under actual operating
conditions may be less than optimum
depending on where the projector is
placed and the radio signal environment.
• If the GyroRemote does not operate, press
on the GyroRemote.
Operating by Turning Your Wrist
(Selecting OSD Menus, Operating Presentation Tools)
The GyroRemote accurately tracks your wrist
movements in the air while holding it and
performs the following operations.
1
2
1 Bright and easy-to-see screen
pointer. (See page 44.)
2 Operate the menu with a simple wave
of the hand. (See pages 54, 55.)
3
Function 1
button
3 Select the function assigned using
the function buttons 1-4 by selecting
the Button Assign Function from the
5 Button Assign Function groups.
Function 3
button
Each press of
toggles the 5 Button Assign Function groups.
Function 4
button
4 With the GyroRemote you can operate your computer with the same
feeling as operating a normal mouse
by connecting the projector and a
computer using the included USB
cable. (See page 47.)
-40
4
Function 2
button
ASSIGN
button
Mouse Control
Function Assign
Function 1 button
The Button Assign function on the
GyroRemote, consists of 5 items (1/5 to 5/5)
and within each, there are 4 function buttons
(Function 1 to 4.)
Selecting the function buttons for assigning
items is done via the projector.
1
on the GyroRemote.
• Each time you press
the Button
Assign selection changes as shown
below.
→ 1/5 → 2/5 → 3/5 → 4/5 → 5/5
Press
ASSIGN button
Function 1 button
Function 2 button
Function 3 button
Function 4 button
.
Basic Operation
2
Press
Function 4
button
Function 3
button
Function 2
button
UNDO
button
• The Button Assign selection display
disappears.
All Button Assign selections
• The list can also be displayed using
: ASSIGN button
.
: LEFT-CLICK/ENTER button
: RIGHT-CLICK/UNDO button
-41
Using the GyroRemote (cont.)
LED
indicator
GyroRemote RF Channel
Setting or Confirming
The GyroRemote uses radio signals, which can
receive interference under certain conditions. To
avoid interference, when using multiple
GyroRemotes, register a different channel for each
GyroRemote in the projector. The GyroRemote has
8 channels for U.S., Canada, etc. and 4 channels
for Europe, Australia, Oceania and Aisa.
1
RF CH+ button
Press
located on the
GyroRemote.
• The current channel in use is displayed on
the lower right of the screen.
You can also confirm the RF channel by the
number of times the LED indicator flashes.
(Ex: RF Channel 3 if the LED indicator
flashes 3 times.)
2
Hold
RF CH : 3
for more than 1 sec.
• Each time you press for over 1 sec. the
RF channel changes as shown below.
• The switched channel is displayed at the
bottom right of the screen.
For U.S., Canada, etc.
→1→2→3→4→5→6→7→8
Adjustment buttons
"'\ |
("'\
|)
For Europe, Australia, Oceania and Asia
→1→2→3→4
Registering the GyroRemote
in the Projector
When using one GyroRemote with multiple projectors
or one projector with multiple GyroRemotes, the
GyroRemote(s) should be stored in the projector.
Info
• If the GyroRemote is connected to a cable,
make sure to first remove the cable before
registering the GyroRemote.
1
Select “Register R/C” in the
Option (2) menu.
2
On the “Do you want to enter the
Learn Mode?” message,
select “Yes” using
or
,
and press
.
-42
ENTER button
3
Press
on the GyroRemote
you want to register.
• The LED indicator on the GyroRemote
blinks.
• “Registered” is displayed at the bottom
of the screen for a few seconds and
registration starts.
When storing is complete, “Learn
Mode” is displayed.
LED
indicator
TEACH button
Note
• If no action is taken for more than 5
minutes, the projector exits from the
Learn mode.
Registered
4
Press
• This completes the Registration mode.
Basic Operation
Registering Multiple
GyroRemotes in One
Projector
A maximum of 8 GyroRemotes can be registered.
1
Set the same channel for the
RF channel of the GyroRemote
you want to register.
• For details on the setting, see page 42.
2
Using step 3 in “Registering
the GyroRemote in the Projector”, press
on the
GyroRemotes to be registered.
ENTER button
TEACH button
• When registering other GyroRemotes
continuously, after each GyroRemote
is registered and the Registration
mode message is displayed, proceed
with the next GyroRemote.
• After 8 GyroRemotes have been registered, the Registration mode will
automatically terminate.
3
Press
when the number of
registered GyroRemotes is
fewer than 8.
• This ends the Registration mode.
Note
• Contact your nearest Sharp Authorized Projector Dealer or Service
Center if you need to use an additional GyroRemote unit.
-43
Using the Presentation Tools
The GyroRemote is equipped with the following presentation tools. These are very useful
when emphasizing a main point during the presentation.
• Pointer function
• Stamp function
• Line function
LED lamp
Function 1 button
Using the Pointer
1
Hold the GyroRemote and
.
move it while pressing
ENTER button
Function 3 button
• The pointer moves in accordance with
the GyroRemote’s movements.
is
• The pointer disappears when
released.
Note
• When operating the GyroRemote
with multiple projectors, the position
of the pointer may be slightly off in
each projector. This does not
indicate a malfunction.
Info
• Hold the GyroRemote and move it
around freely in the air. The pointer
on the screen moves precisely in
concert with the movement of your
GyroRemote in hand. For best operating results, hold your arm in a
fixed position and rotate your wrist
freely.
-44
Function 2
button
POINTER button
UNDO button
Function 4 button
GYRO ACTIVE
button
ASSIGN button
Using the Stamp Function
1
Press
on the GyroRemote
and then select “Button Assign
1/5”.
• The assign function is displayed at the
bottom right of the screen.
2
Press
on the GyroRemote.
• The stamp type will change every time
is pressed, as shown on the right.
3
Press on the GyroRemote to
select the color.
• The stamp color will change every time
is pressed, as shown on the right.
4
Red
Green
Blue
Yellow
Black
White
Purple
Light blue
Basic Operation
Move the GyroRemote while
.
holding down
• The stamp will move on the screen.
5
Release
at the location
on the screen that you want to
stamp, and press
.
• The stamp will be fixed at that location.
Note
• If you want to display another stamp, repeat steps 2 to 5.
• Press
to delete a stamp just inserted.
• Press
to clear all stamps.
• Even if the GyroRemote is moved,
will not function if it is not held down.
-45
Using the Presentation Tools (cont.)
Using the Line Function
Using the GyroRemote, you can draw on the
screen various shapes such as boxes, circles,
horizontal, vertical, perpendicular and freestyle lines.
1
Press
on the GyroRemote and
then select “Button Assign 1/5”.
• The assign function is displayed at the
bottom right of the screen.
2
3
Press
on the GyroRemote.
• The type of drawing will change every time
is pressed, as shown on the right.
Press on the GyroRemote to
select the color.
• The Line color will change every time
is pressed, as shown on the right.
4
Diagonal
line
Horizontal
or vertical
line
Box
Circle
Free line
Red
Green
Blue
Yellow
Black
White
Purple
Light blue
Move the cursor to the starting
position while holding down
on the GyroRemote.
Note
• If you want to display another stamp,
repeat steps 2 to 4.
5
Release
on the Gyro-Remote and press
.
6
Move the cursor to the ending
position while holding down
on the GyroRemote, and
press
.
How to drow lines and shapes
1
1
2
Note
• If you want to draw another shape
or line, repeat steps 2 to 6.
to clear any shapes or
• Press
horizontal or vertical lines you have
just drawn in and all free lines.
• Press to clear all shapes or lines.
2
1
2
1
2
1:Starting point 2: Ending point
-46
2
: Drawing direction
Using the Wireless Mouse Function of the GyroRemote
The GyroRemote can perform mouse operations on a computer screen displayed on the
actual screen.
Using as a Wireless
Mouse
1
Supplied
accessory
Connect the projector to the
computer using the supplied
USB cable.
USB cable
USB port
Computer
Note
• This function only wor ks with
Microsoft Windows OS and Mac OS.
However, this function does not
work with the following operating
systems that do not support USB.
• Versions earlier than Windows 95.
• Versions earlier than Windows NT
4.0.
• Versions earlier than Mac OS 8.5.
3
Move the GyroRemote while
. The LED
holding down
indicator is lit.
Press
or
. It functions
the same as the buttons of a
mouse connected to the computer.
Basic Operation
2
le
USB cab
L-CLICK
button
LED indicator
R-CLICK button
GYRO ACTIVE
button
• In the case of one mouse button (such
as on a Macintosh) clicking this button
will function the same as either
and
.
-47
Using the Wireless Mouse Function of the GyroRemote (Cont.)
Connecting the
GyroRemote with a
Cable
Connect the GyroRemote and projector using
a cable in places where signal reception is
weak.
Note
• GyroRemote turns itself off if detached
from the ø2.5 to ø3.5 mm wired remote
control cable. To use it again, press
to reactivate.
• When purchasing a ø2.5 to ø3.5 mm wired
remote cable, please contact Sharp Authorized Projector Dealer or Service Center.
-48
ø2.5 to ø3.5 remote
control cable
available as Sharp
service part QCNW5943CEZZ
ø3.5 minijack cable
(commercially available or
available as Sharp service
part QCNW-4870CEZZ)
Turning Off the
GyroRemote
Caution
• Make sure to turn off the GyroRemote
aboard aircraft or other places where using radio signals is restricted.
Make sure to turn off the GyroRemote to
prevent any unwanted operations, when not
using the projector. This also prevents
consumption of batteries set in the
GyroRemote.
1
TEACH button
POWER button
Press
and
located inside the lower cover on the
GyroRemote at the same time
for more than 2 seconds.
RF CH+ button
• The LED Indicator will flash 3 times
and the GyroRemote will turn off.
Any buttons pressed after (excluding
) will not emit signals.
Basic Operation
2
Press
on the GyroRemote
to turn on the GyroRemote.
Note
• GyroRemote Sleep Function
To avoid battery consumption, the
GyroRemote automatically enters
the Sleep mode if not action takes
place within 5 minutes. If the
GyroRemote cannot be operated,
on the
press once
GyroRemote to resume operation.
-49
Using the Menu Screen
This projector has three sets of menu screens that allow you to adjust the image and various
projector settings.
You can operate the menus from the projector or GyroRemote using the following procedure.
On-screen menu for INPUT 1 RGB mode
On-screen menu for INPUT 2
or INPUT 3 Mode
Menu Bar
(Main Menu)
Menu Bar
(Main Menu)
On-screen menu for INPUT 4 RGB mode
Menu Bar
(Main Menu)
MENU button
Menu Selections on the
Projector (Adjustments)
1
Press
Adjustment buttons
("'\ |)
.
• The menu screen is displayed.
Note
• The “Picture” menu screen is
displayed in inputs 1, 2 and 3 and
the “Card” menu screen is displayed
in INPUT 4 mode.
• The on-screen display shown on the
right is displayed when the INPUT
1 mode is selected.
-50
ENTER button
"Menu Screen
2
Press
or
to select the
menu you want to adjust.
Note
• For details on the menus, see the
tree charts on pages 56 and 58.
• When using the GyroRemote to
move through a menu, see page 54.
3
Press
or
to select
the item you want to adjust.
Note
• To display a single adjustment item,
press
after selecting the item.
Only the menu bar and the selected
adjustment item will be displayed.
or
Then if you press
,
the following item (“Phase” is after
“Clock”) will be displayed.
Basic Operation
|
• Press
to return to the previous
screen.
4
Press
or
to adjust (set)
the item selected.
• The adjustment is stored.
5
Press
.
• The on-screen display is cleared.
-51
Using the Menu Screen (cont.)
Menu Selections on the
projector (Settings)
1
Press
.
• The menu screen is displayed.
MENU button
Adjustment buttons
("'\ |)
Note
• The “Picture” menu screen is
displayed in inputs 1, 2 and 3 and
the “Card” menu screen is displayed
in INPUT 4 mode.
• The on-screen display shown on the
right is displayed when the INPUT 1
mode is selected.
2
Press
or
to select the
menu you want to adjust.
ENTER button
▼ Menu Screen
Note
• For details on the menus, see the
tree charts on pages 56 and 58.
• When using the GyroRemote to
move through a menu, see page 55.
3
Press
or
to select
the item you want to set.
Note
• Press
to return to the previous
screen.
• In some menus, select the icon
using
or
.
Sub menu
-52
4
Press
.
• The cursor shifts to the sub menu.
Sub menu
Press
or
to select
the setting of the item
displayed in the sub menu.
6
Press
Basic Operation
5
.
• The item selected is set and the adjustment is stored.
Note
• Some adjustment items will display
a confirmation message.
When setting an item, press
or
to select “Yes” or “OK” and then
press
7
Press
.
.
• The menu will disappear.
-53
Using the Menu Screen (cont.)
Using the GyroRemote to
Navigate the On-screen
Menu (Adjustments)
1
Press
.
• The menu screen is displayed.
Note
• The “Picture” menu screen is
displayed in inputs 1, 2 and 3 and
the “Memory Card” menu screen is
displayed in INPUT 4 mode.
• The screen on the right shows the
INPUT 1 mode screen.
2
MENU button
1 While holding down
,
move the GyroRemote left
and right to select the menu.
On-screen menu for INPUT 1 mode
Menu Bar
(Main Menu)
GYRO ACTIVE
button
Note
• The GyroRemote will not function if
is not held down.
• If
is pressed twice, the GYRO
ACTIVE function will remain active
.
without having to hold down
(The LED indicator will remain lit.)
If
is pressed again, the GYRO
ACTIVE function will be released
and the LED indicator will turn off.
• You can select the menu by presswhile the menu bar is
ing
displayed.
2 While holding down
,
move the GyroRemote up or
down to select an item.
3 While holding down
,
move the GyroRemote to the
right and the left to adjust
(set) the selected item.
1
(Rear)
2
GYRO ACTIVE
button
Note
• The adjustment is stored.
• Pressing
can also adjust.
3
-54
Press
.
• The display disappears.
3
Using the GyroRemote
to Navigate the Onscreen Menu (Settings)
1
Press
MENU button
.
• The menu screen is displayed.
Note
• The “Picture” menu screen is
displayed in inputs 1, 2 and 3 and
the “Memory Card” menu screen is
displayed in INPUT 4 mode.
• The screen on the right shows the
INPUT 1 mode screen.
2
On-screen menu for INPUT 1 mode
Menu Bar
(Main Menu)
1 While holding down
,
move the GyroRemote left
and right to select the menu.
Note
Basic Operation
• The GyroRemote will not function if
GYRO ACTIVE
button
is not held down.
is pressed twice, the GYRO
• If
ACTIVE function will remain active
without having to hold down
.
(The LED indicator will remain lit.)
is pressed again, the GYRO
If
ACTIVE function will be released
and the LED indicator will turn off.
• You can select the menu by pressing
while the menu bar is
displayed.
2 While holding down
,
move the GyroRemote up or
down to select an item.
1
(Rear)
3 While holding down
,
move the GyroRemote to the
right.
• The cursor will move to the sub
menu.
4 While holding down
,
move the GyroRemote up or
down to select items on the
sub menu and press .
2
GYRO ACTIVE
button
3
4
•The settings are stored.
3
Press
.
• The display disappears.
-55
Menu Bar Items
This list shows the items that can be set in the projector.
■ INPUT 1 Mode
Main menu
Sub menu
Main menu
Sub menu
Picture
Contrast
-30
+30
Options (1)
Pict in Pict
[ON/OFF]
Page 59
Bright
-30
+30
Page 87
Power Save
[ON/OFF]
Color
-30
+30
sRGB
[ON/OFF]
Tint
-30
+30
Auto Search
[ON/OFF]
Sharp
-30
+30
DNR
Red
-30
+30
OFF
Level 1
Blue
-30
+30
OSD Display
Normal
Level A
Level B
Image Capture
Save Image
Delete
Background
Sharp
Custom
Blue
None
Startup Image
Sharp
Custom
None
CLR Temp
-3
+3
Reset
Signal Type
RGB
Component
Progressive Mode
2D Progressive
3D Progressive
Film Mode
Fine Sync
Clock
Page 61
Phase
H-Pos
–150
–30
–150
V-Pos
–60
+150
Level 3
+30
Auto Power Off [ON/OFF]
+150
Monitor Out
+60
Disable
Yes (Y Cable)
Reset
Save Setting
Select Setting
1
2
Resolution
Resolution
1024 × 768
800 × 600
Vert
Freq
Vert
Freq
60 Hz
75 Hz
Resolution
Resolution
1024 × 768
800 × 600
Vert
VertFreq
Freq
60 Hz
75 Hz
Options (2)
Lamp Timer
Page 96
Break Timer
•
•
PRJ Mode
7
1
2
Register R/C
•
•
7
Special Modes
Keylock Level
Normal
Level A
Level B
Password
Old Password
New Password
Reconfirm
Anti-Theft
Old Code
New Code
Reconfirm
Resolution
1
2
3
Front
Ceiling + Front
Rear
Ceiling + Rear
640 × 480
720 × 480
480P
•
•
7
Signal Info
Resolution
Hor Freq
Vert Freq
Auto Sync
OFF
Normal
High Speed
Auto Sync Disp [ON/OFF]
640 × 480
31.5 KHz
60 Hz
All Reset
Language
Page 37
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Status
Page 106
Note
• The resolution, vertical frequency and horizontal frequency figures displayed above are for example
purposes only.
• When DVI digital signals have been entered into INPUT 1, in “Picture” only “CLR Temp”, “Red” and “Blue”
can be adjusted and in “Fine Sync” only “Signal Info”, “Auto Sync” and “Auto Sync Disp” can be used.
• When the signal type is set as “Component”, in the “Picture” menu of INPUT 1 “Color”, “Tint” and “Sharp”
are displayed.
• Some items cannot be reset, even when “All Reset” in Options (2) has been selected. For details see page 105.
-56
■ INPUT 2 / 3 Mode
Main menu
Sub menu
Main menu
Sub menu
Picture
Contrast
–30
+30
Options (2)
Lamp Timer
Page 59
Bright
–30
+30
Page 96
Break Timer
Color
–30
+30
Tint
–30
+30
Sharp
–30
+30
Red
–30
+30
Blue
–30
+30
CLR Temp
–3
PRJ Mode
Register R/C
+3
Keylock Level
Normal
Level A
Level B
Password
Old Password
New Password
Reconfirm
Anti-Theft
Old Code
New Code
Reconfirm
Reset
Progressive Mode
2D Progressive
3D Progressive
Film Mode
Front
Ceiling + Front
Rear
Ceiling + Rear
All Reset
Options (1)
Power Save
[ON/OFF]
Page 87
Auto Search
[ON/OFF]
Language
OFF
Level 1
OSD Display
Normal
Level A
Level B
Video System
Auto
PAL (50/60Hz)
SECAM
NTSC4.43
NTSC3.58
PAL-M
PAL-N
Background
Sharp
Custom
Blue
None
Startup Image
Sharp
Custom
None
Auto Power Off
Page 37
Level 3
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Basic Operation
DNR
Status
Page106
[ON/OFF]
-57
Menu Bar Items (cont.)
This list shows the items that can be set in the projector.
■ INPUT 4 Mode
Main menu
Card
Sub menu
Main menu
All Files
Image File
Script File
Display File
Page 78
Sort
Name
Date (New)
Date (Old)
Data Type
View
Thumbnails
List
Autorun
OFF
Script File
Slide Show
Interval
15 sec
30 sec
45 sec
60 sec
90 sec
120 sec
180 sec
300 sec
Lamp Timer
Page 96
Break Timer
PRJ Mode
Page 37
Page 69
Name
TCP/IP
IP Address
Gateway
Subnet Mask
Wireless LAN
Channel
SSID
DHCP Server
Server
Start Address
Max Lease
Keylock Level
Normal
Level A
Level B
Password
Old Password
New Password
Re confirm
Anti-Theft
Old Code
New Code
Reconfirm
All Reset
Language
Projector
Front
Ceiling + Front
Rear
Ceiling + Rear
Register R/C
Eject PC Card
Network
Sub menu
Options (2)
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
[ON/OFF]
Status
[10]
Page 106
Reset
Options (1)
Power Save
[ON/OFF]
Page 87
sRGB
[ON/OFF]
Auto Search
[ON/OFF]
OSD Display
Normal
Level A
Level B
Image Capture
Save Image
Delete
Background
Sharp
Custom
Blue
None
Startup Image
Sharp
Custom
None.
Auto Power off
[ON/OFF]
Note
• Some items will not be reset, if you select All Reset in Options (2). For details, see page 105.
-58
Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings.
Selected Item
Description
button
button
Contrast
For adjusting the contrast level
For less contrast
For more contrast
Bright
For adjusting the brightness of an image
For less brightness
For more brightness
Color
For adjusting the color intensity of the image
For less color intensity For more color intensity
Tint
For adjusting the tones of an image
Skin tones become purplish
Sharp
For making sharper or softer the contour of an image For less sharpness
Red
For adjusting the redness level
For weaker red
For stronger red
Blue
For adjusting the blue level
CLR Temp
For adjusting the color temperature of an image
For weaker blue
Decreases color
temperature for warmer,
reddish, incandescentlike images.
For stronger blue
Increases color
temperature for cooler,
bluish, fluorescent-like
images.
Skin tones become greenish
For more sharpness
Adjusting Image
Preferences
Basic Operation
Adjust the Picture menu on the menu
screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• “Color”, “Tint” and “Sharp” are not displayed when selecting INPUT 1 and the
“Signal Type” is “RGB” .
• The picture adjustments can be stored
separately in each input mode.
• When the signal type in INPUT 1 has
been set to Component, “Sharp” can be
adjusted when 480I, 480P, 720P or 1080I
signals are entered.
• When “sRGB” in the “Options (1)” menu
has been set to “ON”, “Red”, “Bleu”, and
“CLR Temp” cannot be adjusted.
• To reset all adjustment items, select “Re.
set” and press
Selecting the Signal Type
This function allows you to select the input
signal type RGB or Component for INPUT1.
Select “Signal Type” in the “Picture”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
•
RGB
Set when RGB signals are received.
Component
•
Set when Component signals are received.
-59
Adjusting the Picture (cont.)
Progressive Mode
This function allows you to select the progressive display of a video signal. The progressive display projects a smoother video
image.
Select “Progressive Mode” in the “Picture” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
•
2D Progressive
This function is useful to display fast-moving
images such as sports and action films. This
mode optimizes the image in a displayed frame.
•
3D Progressive
This function is useful to display relatively
slow-moving images such as drama and
documentary more clearly.
This mode optimizes the image by estimating the movement of a number of preceding and succeeding frames.
•
Film Mode
Reproduces the image of film source clearly.
Displays the optimized image of film
transformed with three-two pull down (NTSC
and PAL60Hz) or two-two pull down
(PAL50Hz and SECAM) enhancement to
progressive mode images.
* The film source is a digital video recording
with the original encoded as is at 24 frames/
second. The projector can convert this film
source to progressive video at 60 frames/
second with NTSC and PAL60Hz or at 50
frames/second with PAL50Hz and SECAM
to play back a high-definition image.
• When using progressive inputs, these inputs
are directly displayed therefore 2D
Progressive, 3D Progressive and Film Mode
cannot be selected. These modes can be
selected in interlace signals other than 1080I.
• In NTSC or PAL60Hz, even if the 3D Progressive mode has been set, the three-two pull
down enhancement will be enabled automatically, when the film source has been entered.
• In PAL50Hz or SECAM, the two-two pull
down enhancement will be enabled only in
the Film Mode, when the film source has
been entered.
-60
Adjusting Computer Images
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in
portions of the screen.
Selected Item
Description
Clock
Adjusts vertical noise.
Phase
Adjusts horizontal noise (similar to tracking on your VCR).
H-Pos
Centers the on-screen image by moving it to the left or right.
V-Pos
Centers the on-screen image by moving it up or down.
When Auto Sync is OFF
Basic Operation
When “Auto Sync” is “OFF”, interference
such as flickering or vertical stripes may occur if displaying tilings or vertical stripes.
Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for obtaining an optimum image.
Select “Clock”, “Phase”, “H-Pos” or “VPos” in the “Fine Sync” menu on the
menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• Computer image adjustments can be made
easily by pressing
. See page 63 for details.
Saving Adjustment
Settings
This projector allows you to store up to seven
adjustment settings for use with various computers.
Select “Save Setting” in the “Fine Sync”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
-61
Adjusting Computer Images (cont.)
Selecting Adjustment Settings
Adjustment settings stored in the projector
can be easily accessed.
Select “Select Setting” in the “Fine
Sync” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• If a memory position has not been set, a
resolution and vertical frequency setting
will not be displayed.
• When selecting a stored adjustment setting with “Select Setting”, you can set the
projector in the stored adjustments.
Special Mode Settings
Ordinarily, the type of input signal is detected
and the correct resolution mode is automatically selected. However, for some signals, the
optimal resolution mode in “Special Modes” on
the “Fine Sync” menu screen may need to be
selected to match the computer display mode.
Set the resolution by selecting “Special
Modes” in the “Fine Sync” menu on the
menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• Avoid displaying computer patterns which
repeat every other line (horizontal stripes).
(Flickering may occur, making the image
hard to see.)
• When a DVD player or Digital Video is
connected, select 480P as the input signal.
• See “Checking the Input Signal” on page
63 for information on the currently selected
input signal.
-62
-62
Checking the Input Signal
This function allows you to check the current
input signal information.
Select “Signal Info” in the “Fine Sync”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• The projector will display the number of
scanned lines available input from audiovisual equipment such as a DVD player
or Digital Video.
Auto Sync Adjustment
Used to automatically adjust a computer image.
Select “Auto Sync” in the “Fine Sync”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Basic Operation
Note
When setting to “ Normal” or
“
High Speed”:
• Auto Sync adjustment will occur when the
projector is turned on or when the inputs
are switched, when connected to a computer.
• “Normal” executes Auto Sync more
accurately compared to “High Speed”.
Therefore, Auto Sync may take slightly
longer time.
Manual adjustments should be performed:
• When the optimum image cannot be
achieved with Auto Sync adjustment. See
page 61.
• Auto Sync adjustment may take some
time to complete, depending on the image of the computer connected to the
projector.
• When making adjustments using AUTO
SYNC on the projector.
• When setting “Auto Sync” to “OFF” or
is pressed Auto
“High Speed”, and if
Sync will be executed in “High Speed”
mode. If the button is pressed again
within one minute, Auto Sync will be executed in “Normal” mode.
• Adjustments can also be made by
selecting “Auto Sync” using the Button Assign function.
Screen display during Auto Sync
-63
Adjusting Computer Images (cont.)
Auto Sync Display
Function
Used to set the screen displayed during Auto
Sync.
Select “Auto Sync Disp” in the “Fine
Sync” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
•
The image set as a background image is
projected.
•
The computer image being adjusted is displayed.
-64
-64
Easy to Use Functions
Easy to Use Functions
Using the Network
Before setting the network
This section explains items that can be set in a network. A wireless connection will not be possible if these
items are not set correctly.
Also, as there are values that must be entered in a pre-configured wireless network, make sure to consult
with your network administrator.
IP Address
■ What is an IP Address?
The IP Address is a number for identifying devices connected to the network. An IP address must be
assigned to each device using network values.
Connecting the projector and a computer via a wireless connection is the same as the computer and
projector being connected to a wireless LAN network. Therefore, if the projector (and computer) is not
assigned an IP address, they cannot be identified and thus a wireless connection cannot be possible.
192.168.150.151
192.168.150.153
192.168.150.150
192.168.150.152
192.168.150.154
■ Assigning IP addresses
When creating a local network where the projector and a computer are connected in a wireless environment,
192.168.0.1 to 192.168.255.254 can be assigned as the IP addresses for a local network for the devices
connected to that network.
The IP address of the projector is 192.168.0.1 and as long as there are no conflicts, the default settings do
not have to be changed.
Example
• Projector ................ 192.168.150.150
• Computer (no. 1) ... 192.168.150.151
• Computer (no. 2) ... 192.168.150.152
For settings, see page 70.
This projector comes with a DHCP server function that automatically assigns IP addresses to devices
connected to the network.
For details, see page 73.
Note
• The range of IP addresses that can be assigned in a local network is fixed.
• IP stands for Internet Protocol.
-66
DHCP server function
■ What is a DHCP server function?
The DHCP server function automatically assigns IP addresses to devices connected to the network. When
the Network Settings on the computer have been set to Automatically get IP address (DHCP server enabled),
the projector will automatically assign IP addresses.
192
.16
8.1
50.
152
.153
.150
.168
2
9
1
192.168.150.154
192.168.150.151
Make the following settings when using this function
1Set the DHCP server function on the projector to ON.
2Set the start value of the IP address assigned and an expected number of IP address to be automatically assigned (Maximum number to be assigned).
For settings, see page 73.
Note
• DHCP stands for Dynamic Host Configuration Protocol.
Wireless Channels
1 ch
6 ch
11ch
■ Assigned wireless channels
If there are no other networks that can cause interference nearby, set either 1, 6, or 11.
If there are no interferences on 11 channel settings, you do not have to change the default settings.
For settings, see page 71.
-67
Easy to Use Functions
■ What is a wireless channel?
A wireless channel is a frequency used by wireless LAN PC cards when communicating. For IEEE802.11b
standard, 14 channels can be used. If other wireless LAN networks are being used near the location where
the projector is, make sure that different channels have been set to avoid interference.
Using a Wireless LAN PC Card
Inserting a wireless LAN PC card into the INPUT 4 PC card slot on the projector allows you to receive images to the
projector and project them via a wireless connection.
Installing a Wireless
LAN PC Card
1
Insert the wireless LAN PC
card into the INPUT 4 PC card
slot on the projector.
• For details on how to install the card,
see page 31.
• When the card is inserted, the input
will automatically change to INPUT 4.
Info
• Make sure to turn on the projector first, when
receiving images in the projector using a wireless LAN PC card. When “Standby” is displayed on the screen, turn on the computer.
Note
• See page 75 when installing a memory
card in the projector.
• Installation should be done after “Standby” is
displayed in the lower right corner of the screen.
Ejecting the Card
Make sure to perform the following procedures before removing the card. Select “Eject PC Card” in the Card menu
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
Select “Eject PC Card” and press
2
Remove the card.
• Remove the card after the message
is displayed.
• For details on how to remove the card,
see page 31.
Info
• If the card is removed without selecting
“Eject PC Card” in step 1 above, the data
stored on the PC card may be lost, or the
PC card may be damaged.
• When moving the projector, make sure to
eject the PC card and that the Eject button is
pressed all the way in. If moved with the Eject
button out, the projector may be damaged.
68 -68
.
• After a few seconds, the message “You may
safely eject the PC Card.” will be displayed.
Network Settings
• To project images via a wireless connection, make sure to make the necessary network settings on both the
computer and projector.
• See the Wireless Reality software operation manual for details on how to set the computer.
• Also, as there are values that must be entered in a pre-configured network, make sure to consult with your
network administrator.
Setting Up a Projector Name
This Network setting assigns a name to the projector. The default setting is “MY_PROJECTOR”.
• The projector name is displayed when the
projector has been found via the computer,
and you can set the name as you like.
When selecting “Projector” in the network menu on the menu screen
➝ For operating the menu screen, see
pages 50 to 55.
1
Press
or
to select
“Projector” and then press
.
Note
2
Press
3
Press
or
to select
the characters you want to set.
Easy to Use Functions
• If a password has been set, the password
input box will be displayed when selecting
the “Projector”.
in “Name”.
Note
• The following characters can be entered:
Letters (A-Z), numbers (0 – 9) or symbols
(–, _, ( )).
or
• Pressing
switches
between procedures as shown below.
• If you want to delete one charactor to the
left, select “BS” by pressing
or
and press
.
-69
Network Settings (cont.)
4
Press
to move the cursor
to the next charactor.
Note
• If you want to correct a letter or symbol,
press
or
to move the cursor to the
character you want to correct, and then use
or
to correct the character.
• Characters can also be selected using
on the GyroRemote.
• If you want to cancel the settings, press
.
5
Repeat steps 3 and 4 to enter the
remaining characters you want.
Note
• A maximum of 16 characters can be entered.
6
Press
.
• The settings are stored and active.
Setting the TCP/IP
Set the IP Address, Gateway, Subnet Mask of
the projector.
Set “TCP/IP” in the network menu on the
menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
Press
or
to select
TCP/IP and then press
.
Note
• If a password has been set, the password
input box will be displayed when selecting
the “TCP/IP”.
2
Press
or
to select “IP
Address”, “Gateway” or “Subnet
Mask” and then press
.
3
Press
or
to select
the values you want to set.
70 -70
4
Press
or
to move the
cursor to the digit you want to
correct.
Note
• You can also move the cursor by pressing
on the GyroRemote.
• If you want to cancel the settings, press
.
5
Repeat steps 3 and 4 to set all
the digits.
6
Press
.
Setting the Wireless
LAN Channel
⁄ Setting the channel
Set the wireless LAN channel so that no interference occurs with another wireless channel.
Select “Wireless LAN” in the network
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
Press
or
to select
“Wireless LAN” and the press
.
Easy to Use Functions
Note
• If a password has been set, the password
input box will be displayed when selecting
“Wireless LAN”.
2
Press
or
to select
“Channel” and then press
3
.
Press
or
to select
the wireless channel number
you want to set.
Note
• Depending on the country and geographical location, wireless channels that can
be used are limited. Read the Wireless
LAN PC Card operation manual about the
wireless channels that can be used.
4
Press
.
-71
Network Settings (cont.)
¤ Setting the SS ID
Set the projector’s SS ID.
The default setting is “SHARP_PRJ”.
Select “Wireless LAN” in the network
menu on the menu screen
➝ For operating the menu screen, see
pages 50 to 55.
1
Press
or
to select
.
“Wireless LAN” and then press
2
Press
or
“SS ID” and then press
3
to select
.
Press
or
to select
the characters you want to set.
Note
• The characters can be entered following:
Letters (A to Z), numerical (0 to 9),
symbols (–, _, ( ))
• Pressing
or
switches
between procedures as shown below.
• If you want to delete one character to the
left, select “BS” and press
.
4
Press
.
• You can also move the cursor using
on the GyroRemote.
Note
• If you want to correct a letter or symbol,
press
or
to move the cursor to the
character you want to correct, and then use
or
to correct the character.
• If you want to cancel the settings, press
.
5
Repeat steps 3 and 4 to set all
the characters.
Note
• A maximum of 16 characters can be set.
6
72 -72
Press
.
• The settings are enabled.
Setting the DHCP Server
This function is set when using the DHCP
server on the projector.
Set “DHCP Server” in the network menu
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• “Start Address” and “Max Lease” can be
set when DHCP server function is set to
“OFF”.
• If a password has been set, the password
input box will be displayed when selecting
“DHCP Server”.
⁄ Disabling the DHCP server function
Set the “Server” in the submenu to “OFF”.
Select “Yes”
¤ Setting the Assign “Start Address”
Set the Assign Start Address in Start
Address in the Submenu.
For setting the start address, see the procedure in Setting the TCP/IP (page 70).
‹ Assigning a maximum number of
IP addresses
Easy to Use Functions
This function is for setting the maximum
number of IP addresses from the start
address that can be automatically
assigned.
Make sure to set an approximate
amount of the computers that are to
be connected to the wireless LAN.
You can set anywhere between 1 to
253 computers.
Note
• IP addresses will not be assigned if the
last three digits of their number are more
than 255.
› Enabling the DHCP server function.
Set “Server” in the submenu to “ON”.
Note
• When the DHCP server function is set to
“ON”, restart your computer.
• When the DHCP server function of the
projector has been set in a wireless LAN
where there is another DHCP server
(including the projector) connected, the
network may not function correctly. If there
is another DHCP server connected, make
sure to consult with your Network
Administrator.
-73
Network Settings (cont.)
Resetting the Network
Settings
This will return the default values of the
Network Settings.
Select “Reset” in the Network menu on
the menu screen.
When the confirmation screen is displayed, select “YES” using
or
and
press
.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• If a password has been set, the password
input box will be displayed when selecting
the “Reset”.
Wireless LAN PC Card: Troubleshooting
Check the following if you cannot connect to the network using your wireless LAN PC card.
1. Is the Link indicator of the wireless LAN PC card lit?
• Lit: operating normally.
• Flashing: the wireless LAN PC card is not operating properly. Consult with your nearest dealer.
• Off: The card is not in operation. Make sure that the card is installed correctly.
2. Are the SSID and channel settings of the projector and computer the same?
• If the SSID and channel settings of the computer are not the same, then they cannot communicate.
• Make sure that the transmission mode has been set to 802.11 ad hoc mode.
3. Check the projector and computer network settings.
● When the “DHCP Server” on the projector is “OFF”:
Check again the IP address, subnet mask and gateway values of the projector and computer.
● When the “DHCP Server” on the projector is ON:
Check the values of the IP address, subnet mask and DHCP start address of the projector.
If part of the IP address or DHCP start address is not identical to the ones specified in the subnet mask,
IP address assigning cannot be properly done.
IP address
192.168.150.120
Subnet mask
255.255.255.0
Start address
192.168.150.100...correct
Start address
192.168.050.100...wrong
4. When sending the screen to the projector, make sure to turn on the projector first.
When Standby is displayed on the screen, turn on the computer.
If the above procedure is carried out and the wireless LAN PC card still does not operate, see the Wireless
Reality software operation manual.
-74
Using a Memory Card
When a memory card is installed, images stored in the memory card can be projected.
If presentation files are stored in the memory card you can make presentations using only
the projector and the memory card, without having to use a computer.
Displaying of the Contents
in the Card as an Index
1
Insert the memory card into the INPUT 4 PC card slot on the projector.
• For details on installing the card, see
page 31.
• The files stored in the card will be displayed as an index (Index mode). However, Autorun will function when Autorun
Script Files” or “
has been set to “
Slide Show” (page 79).
Note
• For details about the memory cards that
can be used, see page 121.
• For details about the display format of the
Index mode, see pages 76 and 77.
• For details on how to install the wireless
LAN PC card in the projector, see page 68.
• The following are the files that this projector can handle.
Non-compressed Bitmap (.BMP)
JPEG files (.JPEG / .JPG)
Non-compressed TIFF files (.TIFF / .TIF)
VQ files (.VQ)
Script files (.SSF)
Easy to Use Functions
• The file names will be displayed in 8 characters
with their extensions (3 characters).
Ejecting the Card
Make sure to perform the following procedures
before removing the card.
Note
• If the card is removed without performing
these procedures, the data stored on the
card may be lost.
Select “Eject PC card” in the Card menu
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Info
• Before removing the PC card, make sure
to select “Eject PC Card” in the Card menu.
• If the card is removed without selecting
“Eject PC Card” in step 1 above, the data
stored on the memory card may be lost,
or the PC card may be damaged.
-75
Using a Memory Card (cont.)
1
Select “Eject PC Card” and
press
.
• After a few seconds, the message “You
may safely eject the PC Card” will be
displayed.
2
Remove the card.
• Remove the card after the message
is displayed.
• For details on how to remove the card,
see pages 31 and 68.
Setting the Thumbnail
Display
You can display JPEG files and VQ files for
slide show as thumbnails. Some files may not
be displayed as thumbnails.
Images files that cannot be displayed as
thumbnails or other files except images will
be displayed only as file names.
• Other file names except for folders, image
files, and script files will be displayed in gray.
• The folders are displayed in [ ].
• The file names will be displayed in 8 characters with their extensions (3 characters).
• If the file name or folder name is composed of other than letters or numbers,
“?” will be displayed.
Note
• JPEG thumnail images are displayed
when displaying files taken using a PCF
compliant digital camera.
Moving folders
• Press
or
select the folder and press
to
.
Moving the folder up one level
• Select
and press
.
Changing the page displayed
• Select
or
and press
-76
-76
.
Projecting a file
• Press
or
select the file and press
to
.
• The image of the selected file is
displayed.
• If you press
while the image is
displayed, the submenu is displayed.
• Next
Proceeds to the next page.
• Previous
Moves back one page.
• Rotate (right)
Turns the image to the right by 90°.
• Rotate (left)
Turns the image to the left by 90°.
• Index Mode
Quits automatic display of images.The
screen returns to Index mode.
Setting Lists
You can display files in lists.
For list settings, see page 79.
Moving folders
• Press
or
select the folder and press
to
.
Moving the folder up one level
• Select
and press
.
• Select
or
and press
Projecting a file
• Press
or
Easy to Use Functions
Changing the page displayed
.
to select the
image file and press
.
• The selected image is displayed.
• If you press
while the image is
displayed, the submenu is displayed.
• Next
Proceeds to the next page.
• Previous
Moves back one page.
• Rotate (right)
Turns the image to the right by 90°.
• Rotate (left)
Turns the image to the left by 90°.
• Index Mode
Quits automatic display of images.The
screen returns to Index mode.
-77
Memory Card Settings
Setting Files
You can limit the files displayed in the Index
mode according to their type.
Select “Display File” in the Memory
Card menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
• All Files
All the files and folders are displayed.
• Image File
Only images files and folders are
displayed. The types of images files that
can be displayed are as follows:
JPEG, VQ, TIFF, BMP.
• Script File (.SSF)
Only slide show script files and folders are
displayed.
Setting the Display
Order of Files
You can set the display order of files displayed
in the Index mode.
Select “Sort” in the Memory Card menu
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
• Name
Alphabetical order
• Date (New)
New date order
• Date (Old)
Old date order
• Data Type
File type order
-78
-78
Setting the Display Format of the Index Mode
Select “View” in the Card menu on the
menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
• Thumbnails
For displaying the contents of the memory
card as thumbnails.
• List
For displaying the contents of the memory
card in a list.
Using Autorun
The Autorun function works under the
following cases:
• When the projector is turned on with the
memory card installed.
• When installing the memory card while the
projector is on.
Select “Autorun” in the Memory Card
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
“OFF”
For disabling the Autorun function.
“Script File”
Easy to Use Functions
When the script files which are created
by Slide Manager of the Wireless Reality
included with your projector are stored
in the memory card, the Autorun will automatically load the script files and then
projects the image files in order according to the script files.
• The display interval between images is
regulated in the script file.
• Only one file can have Autorun setting per
memory card.
• The display will become an index display,
if there are no script files or SHARP PRJ
folders, or when Autorun is not set even if
there are script files.
“Slide Show”
The image files stored in the root
directory in the memory card will be
projected in order automatically.
• The display will become an index display,
if there are no image files or SHARP PRJ
folders, or when Autorun is not set even if
there are script files.
-79
Memory Card Settings (cont.)
Setting the Display Interval for Image Files
You can set the display interval for slide show
files (image files).
Adjust “Interval” in the Memory Card
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Pressing the
button during image
projection via the Autorun function will
display the submenu.
• Next
Proceeds to the next page.
• Previous
Moves back one page.
• Index Mode
Quits automatic display of images.
The screen returns to Index mode.
Info
If the following operations are executed
during Autorun, Autorun will stop.
• AV MUTE, Break Timer, INPUT, LENS.
• Pressing
to select the Index mode.
Note
• During Slide Show playback, the OSD
message “Please wait.” will appear between slides. This message can be elimiLevel A” or “
nated by selecting “
Level B” in “OSD Display”. See page 92
to disable OSD messages.
• Depending on the type of memory card
and the size of the image file, the image
display interval may be longer than the set
time.
80 -80
Displaying a Still Image
This function allows you to instantly freeze a moving image. This is useful when you want to
display a still image from a computer or video, giving you more time to explain the image to
the audience.
Pausing an image
1
Press
to display “Button
Assign 2/5”.
• The Assign function is displayed at the
bottom right of the screen.
2
Function 2
button
Press
ASSIGN button
.
• The image currently being projected
becomes a still image.
"On-screen Display
Easy to Use Functions
3
Press
again to return to the
moving image from the currently connected device.
Info
• The Still Image function does not work in
INPUT 4.
-81
Selecting the Picture Display Mode
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose “NORMAL”, “FULL”, “DOT BY
DOT”, “BORDER”, “STRETCH” or “SMART STRETCH” image.
Switching the Picture
Display Using Different
Input Signals
1
Press
to display “Button
Assign 4/5”.
• The Assign function is displayed at the
bottom right of the screen.
Function 3
button
2
Press
.
ASSIGN
button
Info
• In the “DOT BY DOT” mode, images are
diplayed with the original resolution,
therefore they are not enlarged.
• When XGA (1024 × 768) signals have
been entered or when using INPUT 4
Mode, they will be fixed as NORMAL.
• “STRETCH” is fixed when 720P or 1080I
signals are entered.
• To return to the previous mode, press
while “RESIZE” is displayed on the screen.
-82
-82
Screen display of the picture display mode
COMPUTER
NORMAL
1024 × 768
1024 × 768
1024 × 768
1024 × 768
960 × 768
SVGA (800 × 600)
XGA (1024 × 768)
SXGA (1280 × 960)
UXGA (1600 × 1200)
SXGA (1280 × 1024)
4:3 aspect ratio
Other aspect ratios
FULL
—
—
—
—
1024 × 768
DOT BY DOT
800 × 600
—
1280 × 960
1600 × 1200
1280 × 1024
• When XGA (1024 x 768) signals have been entered or when using INPUT 4 Mode, they will be fixed as NORMAL.
Output screen image
NORMAL
Input Signal
FULL
DOT BY DOT
Projects a full screen image
Projects a full screen image Projects the original resolution
while maintaining the aspect ratio. while ignoring the aspect ratio.
signal of the image.
Resolution lower than
XGA
4:3 aspect ratio
XGA
4:3 aspect ratio
Resolution higher than
XGA
4:3 aspect ratio
SXGA (1280 × 1024)
VIDEO
480I, 480P, NTSC
PAL, SECAM
720P, 1080I
4:3 aspect ratio.
Letter box, squeeze
16:9 aspect ratio
NORMAL
BORDER
1024 × 768
768 × 576*
—
—
STRETCH
1024 × 576*
SMART STRETCH
1024 × 576*
—
Easy to Use Functions
• “STRETCH” is fixed when 720P or 1080I signals are entered.
* The Digital Shift function can be used with these images.
NORMAL
Input Signal
Projects a full screen image.
Output screen image
BORDER
STRETCH
Projects 4:3 image fully in
STRETCH (the following
column) image.
Projects 16:9 image evenly
over entire screen
(top/bottom black bands).
SMART STRETCH
Projects the image fully in a
16:9 screen by enlarging only
the surrounding areas while
keeping the aspect ratio in
the middle part of the image
at 4:3.
4:3 aspect ratio
480I, 480P, NTSC,
PAL, SECAM
Letter box
Squeeze
720P, 1080I
16:9 aspect ratio
-83
Selecting the Picture Display Mode (cont.)
This function allows you to enlarge a specific portion of an image. This is useful when you
want to display a detailed portion of the image.
Displaying an Enlarged
Portion of an Image
1
Press
to display “Button
Assign 3/5”.
Function 1
button
Function 2
button
Function 3
button
UNDO
button
• The Assign function is displayed at the
bottom right of the screen.
2
Press
age.
ASSIGN
button
to enlarge the im-
• To reduce the size of the enlarged
image, press
.
Note
To enlarge
×1 ×2 ×3 ×4 ×9 ×16 ×36 ×64
"On-screen Display
To reduce
• When an SXGA+ or UXGA (see
page 115) image is displayed, “×2”
and “×3” cannot be selected.
Screen moving
indicator
-84
3
Hold down
and move the
GyroRemote to move the enlarged image.
• If the Screen moving indicator has disappeared, press
to display the
Screen moving indicator, and then
move the image.
Info
• If OSD display in the “Options (1)”
menu is set to “Level A” or “Level
B”, make sure to set it to “Normal”.
If “Level A” or “Level B” is set, the
Screen moving indicator will not be
displayed, and the “Screen Pan”
cannot be performed.
Note
• You can also move the position of the
enlarged image using
or
or
4
on the projector.
Press
to cancel the operation, then the magnification
returns to ×1.
Note
Easy to Use Functions
• In the following cases, the enlarged
image will return to its original size
(×1).
• When switching the input.
• When
(undo) has been
pressed.
• When the input signal has been
changed.
• When the image is replaced during
Autorun.
-85
Gamma Correction Function
Gamma is an image quality enhancement function that offers a richer image by brightening
the darker portions of the image without altering the brightness of the brighter portions.
When you are displaying images with frequent dark scenes, such as a film or concert, or
when you are displaying images in a bright room, this feature makes the dark scenes easier
to see and gives the impression of greater depth in the image.
Selected Mode
Description
STANDARD
For Standard picture
PRESENTATION
Brightens darker portions of image for more enhanced presentations.
CINEMA
Gives greater depth to darker portions of image for a more exciting theater experience.
GAME
Natural color gradation for playing a game, etc.
Adjusting Gamma
Correction
1
Function 1
button
Press
to display “Button
Assign 4/5”.
UNDO button
ASSIGN button
• The Assign function is displayed at the
bottom right of the screen.
2
Press
.
• You can change the gamma correction
type every time you press this button.
Note
• When “sRGB” in the “Options (1)”
menu has been set to “ON”, Gamma
correction cannot be performed for
INPUT 1 and INPUT 4.
3
STANDARD
GAME
PRESENTATION
CINEMA
To return to the default settings, press
when
“Gamma” is displayed.
Note
• Returning to the following gamma modes.
INPUT mode INPUT signal GAMMA mode
RGB
PRESENTATION
INPUT1
Component
CINEMA
INPUT2
S-Video
STANDARD
INPUT3
Video
STANDARD
PRESENTATION
INPUT4
-86
-86
Selecting the Power Save Mode
The Power Save Mode or the Automatic Power Shutoff function allows you to reduce the
power consumption of the projector.
Setting the Power Save
Mode
Select “Power Save” in the “Options (1)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Description of Power Save Modes
Quantity of light is 80%.
Power consumption is 255W.
Quantity of light is 100%.
Power consumption is 295W.
ON
OFF
Note
• It is set to “OFF” normally.
• “Power Save” mode is factory preset to
“OFF”.
• When setting the power save mode to
“ON”, the projected images become dark.
Easy to Use Functions
Automatic Power
Shutoff Function
If this is set to “
(On)” and no action is performed for more than 15 minutes, and in the
following cases, the power will turn automatically off.
• When selecting INPUT 1 to 3: If the input
signal cannot be detected.
• When selecting INPUT 4: If there is no card.
The Auto Power Off function will be disabled
when it has been set to “
(Off)”.
Select “Auto Power Off” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• When the Auto Power Off function is set
(On)”, 5 minutes before the power
to “
turns off, the message “Power OFF in X
min.” will appear on the screen to indicate
the remaining minutes.
-87
Displaying Dual Pictures (Pict in Pict)
Picture in Picture function allows you to display two pictures on the same screen. You can
display the image input from INPUT 2 or 3 as an inset picture overlapping the main picture
from INPUT 1. (This function can only be set in the RGB menu.)
Displaying the Inset Picture
Select “Pict in Pict” in the “Options (1)”
menu on the menu screen. Make sure
to operate after signals have been entered in INPUT 1, INPUT 2 and INPUT 3.
➝ For operating the menu screen, see
pages 50 to 55.
1
Press
• Select
to select
INPUT
button
Adjustment
buttons ('"\ |)
.
to clear the Pict in Pict mode
Note
• When
operating
with
GyroRemote, press
the
to display
4
.
“Button Assign 3/5” and press
• Pict in Pict does not function with
INPUT 4.
2
Press
to change the image
in the inset picture.
3
Press
,
,
or
to set the position of the inset
picture.
• Press
to stop the frame from moving or to make the frame disappear.
Note
• Hold down
and move the
GyroRemote in all directions, when
moving the position of the inset picture using the GyroRemote.
-88
Enter button
UNDO
button
4
Press
ture.
to move the inset pic-
• The inset picture will be moved to the
inset picture frame.
Note
• The inset picture can only be displayed
with composite video (NTSC/PAL/
SECAM) or S-Video signal.
• The Freeze function works only with the
inset picture, when the Pict in Pict mode
is in operation.
When the signal entered into INPUT 1 is
as follows, Pict in Pict does not work:
• With a resolution that exceeds SXGA.
• When the input signal is 480I , 480P,
720P or 1080I.
• When the input signal has changed to
the Interlace mode using RGB signals.
• When the picture display mode is set to
“DOT BY DOT”.
• When no signals are sent to INPUT 1,
or when the resolution or refresh rate
(vertical frequency) is changed.
• You can use
on the GyroRemote or
on the projector to change the inset
picture.
Activating the sRGB Color Management Function
This function calibrates the projector’s output to conform to “sRGB standard (6,500K)”.
Easy to Use Functions
Setting the Color Management Function (sRGB)
Select “sRGB” in the “Options (1)” menu
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• For additional information about sRGB
function, please visit “http://www.srgb.com/”.
Info
• When setting sRGB to “ON”, the projected image may become dark; however,
this does not indicate a malfunction.
When “sRGB” is set to “ON”;
• The gamma correction cannot be set.
• “Red”, “Blue” or “CLR Temp” in “Picture”
cannot be adjusted.
-89
Auto Search Function
This function automatically searches for and switches to the input mode in which signals
are being received, when the projector is turned on, or when the INPUT button is pressed.
Using Auto Search
Select “Auto Search” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
•
ON
Automatically switches to the input mode
in which signals are being received, when
turning on the projector or pressing
on the projector.
• When the Auto Search function has been
set to ON, select any desired input, using
the Button Assignment of the
GyroRemote.
•
OFF
For switching input modes manually in
order by pressing
on the projector.
• To stop searching for the input mode,
press
on the projector or on the
GyroRemote.
-90
Video Digital Noise Reduction (DNR) System
Video Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl
and cross color noise.
Reducing Image Noise
Select “DNR” in the “Options (1)”
menu.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• Set a level so as to view a clearer picture.
Make sure to set DNR to “OFF” in the following cases:
• When the image is blurry.
• When the contours and colors of moving
images drag.
• When TV broadcasts with weak signals
are projected.
Info
Easy to Use Functions
• Make sure to set when signals have been
input into INPUT 2 or INPUT 3.
• This function is available with INPUT 1
(480I and 480P signals) and INPUT 2, 3
(all signals).
-91
Setting On-screen Display
This function allows you to turn on or off the on-screen messages. When setting “
Level B”
in “OSD Display”, the input mode display (e.g. “INPUT 1”) will not appear, even if the INPUT
button is pressed.
Selected Item
Description
Normal
All On-screen Displays are displayed.
Level A
Input/Freeze/Enlarge/Auto Sync/Volume/AV Mute are not displayed.
Level B
All On-screen Displays are not displayed.
(except Menu, On-screen displays displayed when the LENS button is pressed, and
warning displays (Power off/Temp./Lamp, etc.))
Turning Off the
On-screen Display
Select “OSD Display” in the “Options
(1)” menu
➝ For operating the menu screen, see
pages 50 to 55.
Note
• The following messages will be displayed
regardless of “OSD Display” level.
• “Standby” when a wireles LAN PC card
is installed in the INPUT 4 PC card slot.
• “Please wait” when a PC card is installed
or when receiving and reading in files
from a memory card.
-92
-92
Setting the Video Signal
The video input system mode is preset to “Auto”; however, a clear picture from the connected audio-visual equipment may not be received, depending on the video signal difference. In that case, switch the video signal.
Setting the Video
Signal
Select “Video System” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• The video signal can only be set in INPUT 2 or INPUT 3 mode.
• In “Auto”, images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
PAL
SECAM
NTSC4.43
NTSC3.58
When connected to PAL video equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video equipment.
Easy to Use Functions
-93
Saving Projected Images
• This projector allows you to capture projected images (RGB signals) and set them as a
startup image, or background image when no signals are being received.
• You can capture the images that are input using analog RGB signals and Digital RGB XGA
signals.
Capturing the Image
Select “Image Capture” in the “Options
(1)” menu on the menu screen
➝ For operating the menu screen, see
pages 50 to 55.
1
Press
“
or
to select
Save Image” and press
.
• The projected image is captured. It
may take some time for capturing.
2
1 Press
or
to select
“Yes”.
2 Press
.
Note
• The following images can be captured:
• XGA (1024 × 768) non-interlace signals
in INPUT 1.
• XGA (1024 × 768) image files in memory
card in INPUT 4.
• XGA (1024 × 768) images received using
the wireless LAN PC card in INPUT 4.
• The saved image is reduced to 256 colors.
Deleting the Captured
Image
1
Select “
.
2
1 Press
Delete” and press
or
“OK”.
2 Press
-94
-94
.
to select
Setting a Background Image
This function allows you to select the image displayed when no signal is being sent to the
projector.
Selected Item
Description
Sharp
SHARP default image
Custom *1
User customized image (i.e. company logo)
Blue
Blue screen
None
Black screen *2
*1 You can set a captured image as a background image by selecting “Custom”. (See page 94.)
*2 If the input signal has interference, the screen will be displayed with the interference.
Selecting a Background
Image
Select “Background” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• When “Custom” is selected, an image saved
using “Image Capture” can be displayed as a
background image. (See page 94.)
• A “Custom” image is preset as a black screen.
Selecting a Startup Image
This function allows you to specify the image to be displayed upon the projector’s startup.
Selected Item
Description
Sharp
SHARP default image
Custom *
User customized image (i.e. company logo)
None
Black screen
* You can set a captured image as a startup image by selecting “Custom”.
Selecting a Startup Image
Select “Startup Image” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• When “Custom” is selected, an image
saved using “Image Capture” can be displayed as a startup image.
• A “Custom” image is preset as a black screen.
-95
Using an RGB Monitor Loop-out Adaptor
Using an RGB monitor loop-out adaptor (sold separately) and an RGB cable (commercially
available), be sure to set to “
Yes (Y Cable)” when you want to display computer images
both on the projector and on a monitor.
Using an RGB Monitor
Loop-out Adaptor
Select “Monitor Out” in the “Options (1)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• Be sure to set to “
Disable” when not
using an RGB monitor loop-out adaptor
(sold separately).
• If the setting is not correct, the image may
be dark, too bright or whitish. This does
not indicate malfunction.
Yes (Y Cable)”
• Make sure to set to “
when using the RGB monitor loop-out
adaptor(sold separately).
Confirming the Lamp Usage Time
Confirming the Lamp
Usage Time
This function allows you to check the lamp usage time.
Select “Options (2)” menu on the menu
screen to see the lamp usage time.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• It is recommended that the lamp be
changed after approximately 1,900 cumulative hours of use.
For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or
Service Center.
-96
Lamp Usage Time
Displaying the Break Timer
Displaying and Setting
the Break Timer
Select “Break Timer” from the “Options
(2)” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
When “
” is displayed, press
or
to set the
Break Timer.
"On-screen Display
• You can set anywhere between 1 and
60 minutes (in 1 minute units).
To Cancel the Break
Time
1
Press
on the projector or
press
on the GyroRemote.
Easy to Use Functions
Note
• Set the Break time using the GyroRemote
(see page 41).
• Auto Power Off will be temporarily disabled during the Break Timer.
If no signal transmission occurs for more
than 15 minutes after the Break Timer has
completed, the projector will turn off.
• The Break Timer will be displayed on the
startup image. To change the screen displayed during the Break Timer, change the
setting of “Startup Image” (see page 95).
-97
Reversing/Inverting Projected Images
This projector is equipped with a reverse/invert image function that allows you to reverse or
invert the projected image for various applications.
Selected Item
Description
Front
Normal image
Ceiling + Front
Inverted image
Rear
Reversed image
Ceiling + Rear
Reversed and inverted image
Setting the Projection Mode
Select “PRJ Mode” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• If a password has been set, the password
input box will be displayed when selecting the “PRJ Mode”.
• This function is used for the reversed image and ceiling-mount setups. See
page 25 for these setups.
-98
-98
Front
Ceiling+Front
Rear
Ceiling+Rear
Locking the Operation Buttons on the Projector
This function can be used to lock the use of certain operation buttons on the projector.
The following are the three keylock levels.
Keylock Level
Description
Normal
All operation buttons are functional.
Level A
Only INPUT/VOLUME/AV MUTE buttons on the projector are available.
Level B
All operation buttons on the projector are unavailable.
Setting up the Keylock
Select “Keylock Level” in the “Options
(2)” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• If a password has been set, the password
input box will be displayed when selecting the “Keylock Level”.
Canceling the Keylock
Setting
When the Keylock Level is set to “Normal”,
all buttons are functional.
Easy to Use Functions
Select “Keylock Level” in the “Options
(2)” menu and set “ Normal” on the
menu screen.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
Note
• When a password has been set, and
“Keylock Level” is selected, the password
input box will be displayed.
• If both a password and the Keylock Level
have been set at the same time, the password will be necessary before changing
the Keylock Level.
-99
Setting up a Password
A password can be set by the user to prevent adjustments to certain settings on the “Options
(2)” menu. Using a password together with the Keylock Level (page 99) is more effective.
Entering the Password
Select “Password” in the “Options (2)”
menu on the menu screen
➝ For operating the menu screen, see
pages 50 to 55.
1
Press
or
to select
the desired number and then
press
2
.
Enter the 3 remaining digits
and press
3
.
Enter the password again in
“Reconfirm” and press
.
Note
• When a password is set, you need
to enter the password to change
“PRJ Mode”, “Keylock Level”, “AntiTheft”, “Register R/C” and “All Reset” settings.
-100
Changing the Password
Select “Password” in the “Options (2)”
menu on the menu screen
➝ For operating the menu screen, see
pages 50 to 55.
1
Press
,
and
to
enter the password in “Old
Password” and press
2
Press
,
and
.
to
set the new password and
press
3
.
Enter the new 4-digit password
again in “Reconfirm” and
press
.
Note
Easy to Use Functions
• If you do not want to set a password, leave
the fields in procedures 2 and 3 blank and
press
.
• To cancel the password settings, press
.
If You Forget Your
Password
If you forget the password, delete it and set a
new password using the following procedure.
1
Press
-101
Setting the Anti-Theft
The anti-theft function prevents unauthorized use of the projector. You can choose to use
this function or not. If you do not want to use this function, just do not enter the keycode.
Once the theft-deterrent function is activated, users will need to enter the correct keycode
each time the projector is started. Failure to enter the correct keycode will prevent images
from being projected. The following procedures explain how to use this function.
Entering the Keycode
• “Anti-Theft” cannot be selected unless
“Password” is set. (See page 100.)
• When “Anti-Theft” is selected, the password
input box will appear. Enter the keycode after the right password is entered.
Select “Anti-Theft” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
Press any button on the projector or on the GyroRemote,
to enter the keycode.
Note
• The following buttons cannot be set
as key codes.
(Both on the projector and
GyroRemote)
• POWER button
• ENTER button
• UNDO button
• MENU button
(GyroRemote)
• GYRO ACTIVE button
• POINTER button
• L-CLICK/ENTER button
• R-CLICK/UNDO button
• MENU button
• TEACH button
• RF CH+ button
-102
2
Enter the remaining 3 digits by
pressing any buttons you like.
3
Enter the same keycode once
more in “Reconfirm”.
Note
• The Keylock function will become
temporarily disabled.
When “Anti-Theft” is set, the keycode
inputting section appears after the
power is turned on. At that time, enter
the right keycode.
• Press the buttons on the GyroRemote if the
buttons on the GyroRemote are used for setting the keycode. In the same manner, press
the buttons on the projector if the buttons on
the projector are used for setting the keycode.
Info
Easy to Use Functions
• Once the function is activated, you must
remember the correct keycode. We suggest you record the keycode in a safe
place where only authorized users will
have access. If you lose or forget your
keycode, you will need to contact your
nearest Sharp Authorized Projector Dealer
or Service Center (see page 118). You
may need to bring your projector to them
to restore the projector to original factory
condition (password and keycode reset).
• If the Anti-theft function is set using the
buttons of the GyroRemote as the
keycodes and you loose the
GyroRemote, you will not be able to release the Anti-theft function. In case you
loose the GyroRemote, contact your
nearest repair center.
• If you travel with your projector without
your GyroRemote, you will not be able to
unlock the Anti-Theft keycode.
Therefore, we recommend you use the
projector buttons to lock/ unlock the AntiTheft keycode.
-103
Setting the Anti-Theft (cont.)
Changing the Keycode
• When “Anti-Theft” is selected and a password has been entered, the password input
box is displayed. After the password has been
entered, you can change the keycode.
Select “Anti-Theft” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
Enter the preset 4-digit keycode
in “Old Code” using the buttons
on the GyroRemote or on the
projector.
2
Press any button you like on the
GyroRemote or the projector to
enter the new keycode.
3
Enter the same 4-digit keycode
in “Reconfirm” .
Note
• If you do not want to set a keycode, leave
the keycode field blank in steps 2 and 3
and press
.
-104
-104
Initializing the Settings
This function allows you to initialize the settings you have made in the projector.
Returning to the
Default Settings
Select “All Reset” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• If a password has been set, the password input box will be displayed when
selecting “All Reset”.
The following items cannot be initialized.
• Fine Sync
• Special Modes
• Signal Info
• Options (2)
• Lamp Timer
• Anti-Theft
• Language
• Image stored using “Image Capture”
Easy to Use Functions
-105
Displaying the Adjustment Settings
This function can be used to display all the adjusted settings as a list on the screen.
Overview of All Menu
Settings
Select the “Status” menu and press
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
-106
-106
Display example of INPUT 1
Appendix
Appendix
Carrying the Projector
How to Use the
Carrying Case
When transporting the projector, make sure
to retract the antenna, cover the lens with the
lens cap, and place the projector in the included carrying case.
1
Open the cover of the carrying
case.
2
Remove the inner padding from
the carrying case, and fold it in
the direction of the arrows.
3
Reinsert the inner padding into
the carrying case.
Info
• Be sure to insert the inner padding to
protect the lens and the projector.
4
Place the projector and the accessories in the carrying case.
Info
• Be sure to attach the lens cap to protect the lens.
• Be sure the projector has cooled down
enough before placing it in the case.
• Make sure that the GyroRemote
antenna is fully retracted.
• Make sure that the Eject button is
fully inserted.
• Make sure to turn the off the
GyroRemote.
Lens cap
Info
• This carrying case is only for storing and carrying
the projector.
• Shipping the projector in the carrying case as a parcel may cause damage to the projector. If you ship
the projector, be sure to place it in a sturdy case
and with enough shock absorbing material to avoid
any damage.
• Do not expose the carrying case or projector to direct sunlight, near heat sources, or in an enclosed
automobile. The carrying case or projector may
change color or become deformed.
• When moving the projector, make sure to eject the
PC card and the Eject button is pressed all the way
in.
If moved with the Eject button out, the projector may
be damaged.
-108
Adjust the
shoulder
strap.
Maintenance
Cleaning the projector
Cleaning the lens
■ Be sure to unplug the power cord before cleaning the projector.
■ The cabinet as well as the operation panel is
made of plastic. Avoid using benzene or thinner,
as these can damage the finish on the cabinet.
■ Do not use volatile agents such as insecticides
on the projector.
Do not attach rubber or plastic items on the projector for long time.
The effects of some of the agents in the plastic
may cause damage to the quality or finish of the
projector.
■ Use a commercially available blower or lens
cleaning paper (for glasses and camera lenses)
for cleaning the lens. Do not use any liquid type
cleaning agents, as they may wear off the coating film on the surface of the lens.
■ As the surface of the lens can easily get damaged, be sure not to scrape or hit the lens.
Cleani
Paper ng
Wax
Thinner
■ Wipe off dirt gently with a soft flannel cloth.
Cleaning the exhaust and intake vents
■ Use a vacuum cleaner to clean dust from the
exhaust vent and the intake vent.
Projector’s Rear View
■ When the dirt is hard to remove, soak a cloth in a
neutral detergent diluted with water, wring the
cloth well and then wipe the projector.
Strong cleaning detergents may discolor, warp
or damage the coating on the projector.
Make sure to test on a small, inconspicuous area
on the projector before using.
ent
terg
l de
utra
Ne
Neutral detergent
diluted with water
Appendix
-109
Maintenance Indicators
■ The warning lights on the projector indicate problems inside the projector.
■ If a problem occurs, either the TEMPERATURE WARNING indicator or the LAMP REPLACEMENT
indicator will illuminate red, and the power will turn off. After the power has been turned off, follow
the procedures given below.
TEMPERATURE
WARNING
indicator
POWER
indicator
LAMP
REPLACEMENT
indicator
About the TEMPERATURE WARNING indicator
If the temperature inside the projector increases, due to blockage of the air vents, or
the setting location, “
” will blink in the
lower left corner of the picture. If the temperature keeps on rising, the lamp will turn
off and the TEMPERATURE WARNING indicator will blink, the cooling fan will run for
further 90 seconds, then the power will be
” appears, be sure to
shut off. After “
perform the following measures.
About the
LAMP
REPLACEMENT
indicator
■ When the lamp
exceeds 1,900 cumulative hours
of use, “
” will be displayed
on the screen in yellow. When
the cumulative hours of use
” will
reach 2,000, “
change to red, the lamp will automatically turn off and then the
projector as well. At this time, the
LAMP REPLACEMENT indicator will illuminate in red.
■ If you try to turn on the projector
a fourth time without replacing
the lamp, the projector will not
turn on.
Maintenance indicator
Condition
Problem
Possible Solution
Normal
Abnormal
•
Relocate
the projector to an area
• Blocked air intake
with proper ventilation.
TEMPERAThe internal
TURE
• Cooling fan break• Take the projector to your nearest
temperature is
Red on/
WARNING
Off
down
Sharp Authorized Projector Dealer
Power off abnormally high.
indicator
• Internal circuit failure or Service Center (see page 118)
• Clogged air intake
for repair.
LAMP
REPLACEMENT
indicator
Green on
Green
blinks
when the
lamp is
active.
Red
blinks
Time to replace
the lamp
• Lamp usage time
exceeded 1,900
hours
Red on/
Power off
The lamp does
not illuminate.
• Burnt-out lamp
• Lamp circuit failure
• Take the projector to your nearest
Sharp Authorized Projector Dealer
or Service Center (see page 118)
for repair or lamp replacement.
• Please exercise care when
replacing the lamp (see page 111).
Info
• If the TEMPERATURE WARNING indicator illuminates, and the power turns off, follow the above possible
solutions and then wait until the projector has cooled down completely before plugging in the power cord and
turning the power back on. (At least 5 minutes.)
• If the power is turned off and then turned on again, as during a brief test, the LAMP REPLACEMENT indicator may be triggered, preventing the power from going on. Should this occur, take the power cord out of the
wall outlet and plug it back in again.
• If you want to clean the air vents during projector operation, be sure to first press
and after the power has
turned off and the cooling fan has stopped, then clean the vents.
• Do not unplug the power cord after the power has been turned off and while the cooling fan is running. The
cooling fan runs for about 90 seconds.
-110
Regarding the Lamp
Lamp
■ It is recommended that the lamp (sold separately) be replaced after approximately 1,900 cumulative
hours of use or when you notice a significant deterioration of the picture and color quality. The lamp
usage time can be checked with the on-screen display. See page 96.
■ For lamp replacement, please consult your nearest Sharp Authorized Projector Dealer or Service
Center.
IMPORTANT NOTE TO U.S. CUSTOMERS:
The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service
of this projector under warranty, including lamp replacement, must be obtained through a Sharp Authorized Projector Dealer or Service Center. For the name of the nearest Sharp Authorized Projector Dealer
U.S.A. ONLY
or Service Center, please call toll-free: 1-888-GO-SHARP (1-888-467-4277).
Caution Concerning the Lamp
■ This projector utilizes a pressurized mercury lamp. A loud sound may indicate lamp failure. Lamp
failure can be attributed to numerous sources such as: excessive shock, improper cooling, surface
scratches or deterioration of the lamp due to a lapse of usage time. The period of time up to failure
largely varies depending on the individual lamp and/or the condition and the frequency of use. It is
important to note that failure can often result in the bulb cracking.
■ When the LAMP REPLACEMENT indicator and on-screen display icon are illuminated or flash, it is
recommended that the lamp be replaced with a new one immediately, even if the lamp appears to be
operating normally.
■ Should the lamp break, the glass particles may spread inside the lamp cage or gas contained in the
lamp may be vented into the room from the exhaust vent. Because the gas in this lamp includes
mercury, ventilate the room well if the lamp breaks and avoid all exposure to the released gas. In
case of exposure to the gas, consult with a doctor as soon as possible.
■ Should the lamp break, there is also a possibility that glass particles may spread inside of the
projector. In such a case, it is recommended you contact your nearest Sharp Authorized Projector
Dealer or Service Center to remove the damaged lamp and assure safe operation.
Replacing the Lamp
Caution
• Do not remove the lamp unit immediately after operation of the projector. The lamp will be hot and touching
it can lead to burn or injury.
• Wait at least one hour after the power cord is disconnected to allow the surface of the lamp unit to fully cool
before removing the lamp unit.
■ If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center for repair. Purchase a replacement lamp unit of type BQCPGM20X//1 from your nearest Sharp Authorized Projector Dealer or Service Center. Then carefully
change the lamp by following the instructions described on page 112. If you wish, you may have the
lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center.
Appendix
-111
Regarding the Lamp (cont.)
Removing and Installing the Lamp Unit
Lamp
unit
BQC-PGM20X//1
Info
• Be sure to remove the lamp unit by the
handle. Be sure not to touch the glass
surface of the lamp unit or the inside of
the projector.
• To avoid injury to yourself and damage
to the lamp, be sure to carefully follow
the steps below.
• Do not loosen other screws except for the
lamp unit cover and lamp unit.
• Please refer to the installation manual
included with the lamp unit.
1
POWER button
Press
on the projector to
turn off the power.
• Wait until the cooling fan stops.
Warning!
• Do not remove the lamp unit from the
projector right after use. The lamp will
be very hot and may cause burn or
injury.
2
Disconnect the power cord.
• Unplug the power cord from the AC
socket.
• Retract the antenna.
• Leave the lamp until it has fully cooled
down (about 1 hour).
AC socket
3
Remove the lamp unit cover.
• Turn over the projector, and loosen the
user service screw that secures the
lamp unit cover. Then slide the cover
in the direction of the arrow.
User service screw
-112
4
Remove the lamp unit.
5
Insert the new lamp unit.
6
• Loosen the securing screws from the
lamp unit. Hold the lamp unit by the
handle and pull it in the direction of
the arrow.
• Press the lamp unit firmly into the lamp
unit compartment. Fasten the securing screws.
Securing
screw
Attach the lamp unit cover.
• Slide the lamp unit cover in the direction of the arrow. Then tighten the user
service screw.
Info
• If the lamp unit and lamp unit cover are
not correctly installed, the power will not
tur n on, even if the power cord is
connected to the projector.
Resetting the Lamp
Timer
User service screw
Reset the lamp timer after replacing the lamp.
1
Connect the power cord.
2
Reset the lamp timer.
• Plug the power cord into the AC socket
of the projector.
• While
pressing
simultaneously
, and
on the projec-
,
tor, press
on the projector.
• “LAMP 0000H” is displayed, indicating
that the lamp timer is reset.
AC socket
POWER button
Adjustment buttons
(", |)
Appendix
Info
• Make sure to reset the lamp timer only
when replacing the lamp. If you reset the
lamp timer and continue to use the same
lamp, this may cause the lamp to become
damaged or explode.
ENTER button
-113
Connecting Pin Assignments
DVI Digital / Analog INPUT 1 port : 29 pin connector
• DVI Digital INPUT
9
•••••••••
1 2
••••
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
~ • • • • • • • • • 16
~ •••• 7 8
C1
C2
C4
C5
C3
17
24
18
••••
~ • • • • 23
• DVI Analog RGB Input
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Signal
Not connected
Not connected
Not connected
Not connected
Not connected
DDC clock
DDC data
Vertical sync
Not connected
Not connected
Not connected
Not connected
Not connected
+5V power
Ground
Signal
T.M.D.S data 2–
T.M.D.S data 2+
T.M.D.S data 2 shield
Not connected
Not connected
DDC clock
DDC data
Not connected
T.M.D.S data 1–
T.M.D.S data 1+
T.M.D.S data 1 shield
Not connected
Not connected
+5V power
Ground
Pin No.
16
17
18
19
20
21
22
23
24
C1
C2
C3
C4
C5
• DVI Analog Component Input
Pin No.
16
17
18
19
20
21
22
23
24
C1
C2
C3
C4
C5
Signal
Hot plug detection
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Analog input Red
Analog input Green
Analog input Blue
Horizontal sync
Ground
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Signal
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Ground
Pin No.
16
17
18
19
20
21
22
23
24
C1
C2
C3
C4
C5
4-pin USB connector
• USB connector: 4 pin B-type USB connector
-114
2
1
3
4
Signal
Hot plug detection
T.M.D.S data 0–
T.M.D.S data 0+
T.M.D.S data 0 shield
Not connected
Not connected
T.M.D.S clock shield
T.M.D.S clock+
T.M.D.S clock–
Not connected
Not connected
Not connected
Not connected
Ground
Pin no.
1
2
3
4
Signal
VCC
USB–
USB+
SG
Name
USB power
USB data–
USB data+
Signal Ground
Signal
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Analog input Pr/Cr
Analog input Y
Analog input Pb/Cb
Not connected
Ground
Computer Compatibility Chart
• Multiple signal support
Horizontal Frequency: 15–126 kHz
Vertical Frequency: 43–200 Hz*
Pixel Clock: 12–230 MHz
• Compatible with sync on green and composite sync signals
• UXGA and SXGA compatible in advanced intelligent compression
• AICS (Advanced Intelligent Compression and Expansion System) resizing technology
The following is a list of modes that conform to VESA. However, this projector supports other signals
that are not VESA standards.
PC/
MAC/
WS
Resolution
640 × 350
720 × 350
640 × 400
720 × 400
VGA
640 × 480
PC
SVGA
XGA
800 × 600
1,024 × 768
Horizontal
Vertical VESA DVI
Frequency Frequency S t a n - Supp(kHz)
(Hz)
dard ort
27.0
31.5
37.9
27.0
31.5
27.0
31.5
37.9
27.0
31.5
37.9
26.2
31.5
34.7
37.9
37.5
43.3
47.9
53.0
61.8
78.5
80.9
100.4
31.4
35.1
37.9
44.5
48.1
46.9
53.7
56.8
64.0
77.2
98.3
102.1
125.6
35.5
40.3
48.4
56.5
58.1
60.0
68.7
73.5
77.2
80.6
98.8
113.2
60
70
85
60
70
60
70
85
60
70
85
50
60
70
72
75
85
90
100
120
150
160
200
50
56
60
70
72
75
85
90
100
120
150
160
200
43
50
60
70
72
75
85
90
96
100
120
140
Display
PC/
MAC/
WS
Resolution
✔
✔
✔
1,152 × 864
✔
✔
✔
✔
✔
✔
SXGA
✔
✔
✔
1,280
×
1,024
PC
✔
✔
✔
✔
1,152 × 882
SXGA+ 1,400 ×1,050
Upscale
UXGA
✔
✔
✔
✔
✔
✔
✔
PC/
VGA
640 × 480
MAC 13”
PC/
XGA 1,024 × 768
MAC 19”
PC/
1,280×1,024
MAC 21” SXGA
800 × 600
MAC
SVGA
832 × 624
16”
MAC 21” SXGA 1,152 × 870
HP (WS)
1,280×1,024
PC (WS)
1,280 × 960
WS
SXGA
1,280×1,024
SGI (WS)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1,600
×
1,200
SUN (WS)
1,152 × 900
Horizontal
Vertical VESA DVI
Frequency Frequency S t a n - Supp(kHz)
(Hz)
dard ort
54.3
64.0
64.1
67.5
75.7
77.3
90.2
54.8
65.9
67.4
64.0
74.6
78.1
80.0
91.1
108.4
64.0
74.7
75.0
81.3
87.5
90.1
93.8
106.3
60
70
72
75
80
85
100
60
72
74
60
70
74
75
85
100
60
52
60
65
70
72
75
85
34.9
67
48.4
60.0
60
75
80.0
75
46.8
49.6
68.5
78.1
60.0
85.9
53.5
76.8
60.9
71.9
75
75
75
72
60
85
50
72
66
76
Display
✔
✔
✔
✔
✔
Advanced
Intelligent
Compression
✔
✔
✔
✔
✔
Intelligent
Compression
✔
✔
Upscale
✔
✔
✔
✔
✔
True
Advanced
Intelligent
Compression
Upscale
✔
Advanced
Intelligent
Compression
True
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
Note
-115
Appendix
• This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this
occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how
to change display modes can be found in your notebook computer’s operation manual.
• When this projector receives 640 × 350 VESA format VGA signals, “640 × 400” appears on the screen.
• When receiving 1,600 × 1,200 VESA format signals, sampling occurs and part of the image may be cut as the image is
displayed in 1,024 lines.
Troubleshooting
Problem
No picture and no
sound or projector
does not start.
Check
• Projector power cord is not plugged into the wall outlet.
• Power to the external connected devices is off.
• The selected input mode is wrong.
• Cables incorrectly connected to side panel of the projector.
• Remote control batteries have run out.
• External output has not been set when connecting notebook computer.
• The AV MUTE display appears.
• The lamp unit and the lamp unit cover are not installed correctly.
• Cables incorrectly connected to the side panel of the projector.
• “Bright” is set to minimum position.
Page
26
—
35
27–32
17
—
36
112
27–32
59
Sound is heard but no
picture appears.
• Picture adjustments are incorrectly set.
(Video Input only)
• Video input system is incorrectly set.
(INPUT 1 only)
• Input signal type RGB/Component is incorrectly set.
59
93
59
Color is faded or poor.
Picture is blurred;
noise appears.
• Adjust the focus.
• The projection distance exceeds the focus range.
(Computer Input only)
• Perform “Fine Sync” Adjustments (“Clock” Adjustment)
• Perform “Fine Sync” Adjustments (“Phase” Adjustment)
• Noise will appear depending on the computer.
37
23–24
• The “DNR” (Digital Noise Reduction) setting is not correct.
• Cables incorrectly connected to side panel of projector.
• Volume is set to minimum.
91
27–32
35
61·63
61
—
Picture appears but no
sound is heard.
An unusual sound is
occasionally heard
from the cabinet.
Maintenance
indicator illuminates.
Image cannot be
captured.
Pict in Pict does not
work.
-116
• If the picture is normal, the sound is due to cabinet shrinkage
caused by a room temperature changes. This will not affect
operation or performance.
• See “Maintenance Indicators”.
• The signal in INPUT 1 is not an analog RGB/Digital RGB XGA
(1024 × 768) signal. Images cannot be captured if the signals
are different from the above.
• The signal in INPUT 1 is set to a resolution that exceeds SXGA.
• The signal in INPUT 1 is sending Component signals 480I,
480P, 720P, or 1080I.
• The signal in INPUT 1 is set to interlace mode using RGB signals.
—
110
94
89
Problem
The power cannot be
turned on or off using
the POWER button on
the projector.
The screen turns green
when using the INPUT 1
component.
The screen turn pink
when using the INPUT 1
RGB mode.
The card installed in the
INPUT 4 PC card slot
cannot be recognized.
“Not supported” is
displayed.
Picture is dark.
Picture is too bright and
whitish.
The VOLUME buttons
on the projector do not
work.
Check
• The key lock level is set.
• If level B has been set, none of the buttons will work. If level A
has been set, only Input Switch, Volume and AV mute will work.
Page
99
• The input signal type is not correctly set.
59
• The input signal type is not correctly set.
59
• Make sure that the card is installed.
• Make sure that the Link indicator on the wireless LAN PC card
is lit.
• Is the card installed in the projector compatible with the
projector?
• Is the wireless LAN PC card installed in the projector different
from the wireless LAN PC card “AN-WC11B” (included with the
projector or sold separately)?
• The LAMP REPLACEMENT indicator is blinking in red. Replace
the lamp.
• “Monitor Out” is set to “Disable” when the RGB monitor loop-out
adaptor is connected to Monitor Out.
• “Monitor Out” is set to “Yes (Y Cable)” when the RGB monitor
loop-out adaptor is not connected to Monitor Out.
• Picture adjustments are incorrectly set.
The VOLUME buttons do not work when: (try the VOL+/– on the
GyroRemote)
• when the menu is displayed
• when the lens menu is displayed
• when Pict in Pict is working
• during digital Enlarge (More than double size)
• a DOT BY DOT screen resolution larger than XGA (1024 X 768).
31
4
20
110
96
96
59
—
Appendix
-117
For SHARP Assistance
If you encounter any problems during setup or operation of this projector, first refer to the
“Troubleshooting” section on pages 116 and 117. If this operation manual does not answer
your question, please contact the SHARP Service departments listed below.
U.S.A.
Sharp Electronics Corporation
1-888-GO-SHARP (1-888-467-4277)
[email protected]
http://www.sharplcd.com
Canada
Sharp Electronics of Canada Ltd.
(905) 568-7140
http://www.sharp.ca
Mexico
Latin America
Sharp Electronics Corporation Mexico
Branch
(525) 716-9000
http://www.sharp.com.mx
Sharp Electronics Corp. Latin American
Group
(305) 264-2277
[email protected]
http://www.siempresharp.com
Germany
Sharp Electronics (Europe) GMBH
01805-234675
http://www.sharp.de
U.K.
Sharp Electronics (U.K.) Ltd.
0161-205-2333
[email protected]
http://www.sharp.co.uk
Italy
Sharp Electronics (Italy) S.P.A.
(39) 02-89595-1
http://www.sharp.it
France
Sharp Electronics France
01 49 90 35 40
[email protected]
http://www.sharp.fr
Spain
Sharp Electronica Espana, S.A.
93 5819700
[email protected]
http://www.sharp.es
Switzerland
Sharp Electronics (Schweiz) AG
0041 1 846 63 11
[email protected]
http://www.sharp.ch
Sweden
Sharp Electronics ( Nordic ) AB
(46) 8 6343600
[email protected]
http://www.sharp.se
-118
Austria
Sharp Electronics Austria
(Ges.m.b.H.)
0043 1 727 19 123
[email protected]
http://www.sharp.at
Australia
Sharp Corporation of Australia
Pty. Ltd.
1300-135-022
http://www.sharp.net.au
New Zealand
Sharp Corporation of New Zealand
(09) 634-2059, (09) 636-6972
http://www.sharpnz.co.nz
Singapore
Sharp-Roxy Sales (S) Pte. Ltd.
65-226-6556
[email protected]
http://www.sharp.com.sg
Hong Kong
Sharp-Roxy (HK) Ltd.
(852) 2410-2623
[email protected]
http://www.sharp.com.hk
Malaysia
Sharp-Roxy Sales & Service Co.
(60) 3-5125678
U.A.E.
Sharp Middle East Fze
971-4-81-5311
[email protected]
Thailand
Sharp Thebnakorn Co. Ltd.
02-236-0170
[email protected]
http://www.sharp-th.com
Korea
Sharp Electronics Incorporated of
Korea
(82) 2-3660-2002
[email protected]
http://www.sharp-korea.co.kr
India
Sharp Business Systems (India)
Limited
(91) 11- 6431313
[email protected]
Specifications
Product type Digital Multimedia Projector
Model PG-M25X
Video system NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV720P/DTV1080I
Display method Single Chip Digital Micromirror Device™ (DMD™) by Texas Instruments
DMD panel Panel size: 0.7" (17.8 mm), 1 chip XGA DMD
No. of dots: 786,432 dots (1,024 [H] × 768 [V])
Lens 1–1.2 × zoom lens, F1.75–2.04, f = 28.0–33.5 mm
Projection lamp High Intensity Discharge Lamp (HID Lamp), DC 210 W
Component input signal 29-pin connector
(INPUT1) DVI input signal: Digital 250–1,000 mV 50 Ω
Analog 0.7 Vp-p 75 Ω
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
PB: 0.7 Vp-p, 75 Ω terminated
PR: 0.7 Vp-p, 75 Ω terminated
Horizontal resolution 700 TV lines (DTV720P)
Computer RGB input signal 29-pin connector
(INPUT 1) RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
S-video input signal 4-pin Mini DIN connector
(INPUT 2) Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
Video input signal RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
(INPUT 3) terminated
Pixel clock 12–230 MHz
Vertical frequency 43–200 Hz*
Horizontal frequency 15–126 kHz
Audio input signal ø3.5 mm MINIJACK: AUDIO, 0.5 Vrms, more than 47 kΩ (stereo)
PC card slot (INPUT 4) PCMCIA-TYPE II
Audio output 2.0 W (monaural)
Speaker system 4 cm × 3 cm
Rated voltage AC 100–240 V
Input current 3.2 A
Rated frequency 50/60 Hz
Power consumption 295 W
Heat dissipation 1,110 BTU/hour
Operating temperature 41°F to 95°F (+5°C to +35°C)
Storage temperature –4°F to 140°F (–20°C to +60°C)
Cabinet Plastic
GyroRemote Radio Frequency Range 49.825 – 49.895 MHz (for U.S., Canada etc.),
40.667 – 40.695 MHz (for Europe, Oceania, Asia)
Dimensions (approx.) 8 5⁄8" × 3" × 11 15⁄16" (219 (W) × 76 (H) × 303 (D) mm) (main body only)
8 3⁄4" × 3 1⁄4" × 12 1⁄2" (223 (W) × 83 (H) × 318 (D) mm) (including adjustment feet
and projecting parts)
Weight (approx.) 5.8 lbs. (2.6 kg)
Supplied accessories GyroRemote, Four R-03 batteries, Power cord (6', 1.8 m), Two wireless LAN PC cards, DVI to
15-pin D-sub cable (6', 1.8 m), USB cable (6', 1.8 m), Carrying case, Lens cap (attached), Lens
cap strap, Terminal cover (attached), CD-ROM, Projector operation manual, Quick reference
guides, Wireless Reality software operation manual, Wireless LAN PC Card operation manual.
Replacement parts Lamp unit (Lamp/cage module) (BQC-PGM20X//1), GyroRemote for U.S., Canada etc.
(RRMCG1631CESA), GyroRemote for Europe, Australia, Oceania and Asia (RRMCG1653CESA),
Four R-03 batteries (“AAA” size, UM/SUM-4, HP-16, or similar), Power cord for U.S., Canada etc.
(QACCDA007WJPZ), Power cord for Europe, except U.K. (QACCV4002CEZZ), Power cord for
U.K. and Hong Kong (QACCB5024CENA), Power cord for Australia, New Zealand and Oceania
(QACCL3022CEZZ), DVI to 15-pin D-sub cable (QCNWGA010WJZZ), USB cable
(QCNWG0001WJPZ), Wireless LAN PC card AN-WC11B (RUNTKA025WJZZ), Carrying case
(GCASN0005CESA), Lens cap (CCAPHA001WJ01), Lens cap strap (UBNDT0013CEZZ), Terminal cover (GCOVD0103CESA), CD-ROM (UDSKAA001WJZZ), Projector operation manual
(TINS-A046WJZZ), Quick reference guides, Wireless Reality software operation manual (TINSA049WJZZ), Wireless LAN PC Card operation manual (TINS-A306WJZZ).
This SHARP projector uses a DMD panel. This very sophisticated panel contains 786,432 pixels. As with any high
technology electronic equipment such as large screen TVs,
video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable
tolerances which may result in inactive dots on the
picture screen. This will not affect the picture quality
or the life expectancy of the unit.
Specifications are subject to change without notice.
-119
Appendix
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
Wireless LAN PC Card Specifications
Product Name
11 Mbps Wireless LAN PC Card
Model Number
AN-WC11B (RUNTKA025WJZZ)
Host Interface
PCMCIA TYPE II
Dimensions
2 1⁄8" × 4 1⁄2" × 1⁄4" (54 (W) × 115 (D) × 6 (H) mm)
Weight
0.091 lbs (40 g)
Frequency Band
(Central frequency)
2.4000 – 2.4835 GHz
Number of Channel
1–11 (Channels that can be used vary depending on the country.)
Operating Voltage
3.3 V ± 5% or 5 V ± 5%
Current Consumption
Typ. 240 mA, Max. 300 mA
Spreading
DS-SS (Direct Sequence Spread Spectrum)
Data rate
11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps (Auto-Switch)
Transmit Power
10 dBm (Normal Temp Range) 13 dBm (Max)
Modulation
11 Mbps and 5.5 Mbps: CCK
2 Mbps: DQPSK
1 Mbps: DBPSK
Security
WEP (64 bit/128 bit) (not compatible with the projector)
Standards
IEEE802.11b
Media Access Protocol
CSMA/CA with ACK
Environmental Conditions
Temperature Range
32 to 131°F (0 to 55°C) (Operating)
Humidity Max. 95% Non-condensing
Operating Range
-120
Open Space: 197' to 394' (60 to 120 m); Indoor: 98' to 197' (30 to 60 m)
The transmission distance varies with the transmission speed and the surrounding
environment.
Usable Cards and Their Capacity
1. JPEG images that are DCF compliant *1 and are stored in a memory card such as those
from a digital camera, can be displayed in the projector when using the Card mode.
2. The memory cards in the following table (commercially available) can be used.
Memory Card *2
Flash ATA card
SD memory card
CompactFlash
Multimedia card
Smart media
Memory card capacity
under 128MB can be used.
under 128MB can be used.
under 128MB can be used.
under 64MB can be used.
under 128MB can be used.
* Each memory card requires a suitable PC Card Adapter.
Caution
(1) Operation cannot be guaranteed for other memory cards except for those mentioned
above.
(2) PC Card Adapters may have special regulations according to the memory cards. For
details, see the PC Card Adapter’s operation manual.
(3) In some cases, part of images edited on your computer may not be played.
*1 DCF standard stands for Design rule for Camera File system.
*2 • SD memory card is a trademark.
• CompactFlash is a trademark of San Disk Corporation.
• Multimedia Card is a trademark of Infineon Technologies AG.
• Smartmedia is a trademark of Toshiba Corporation.
Appendix
-121
Dimensions
Units: inches (mm)
Rear View
Side View
Top View
Side View
8 3/4 (223)
12 1/16
(306.5)
54
11 13/16
(303)
8 5/8 (219)
5 1/16 (128)
27 1/16
(68.7)
1/2
Front View
1
(38.7)
1 3/8
(34.2)
54
4 9/16 (115.5)
7 11/16 (195)
3 1/4 (82.5)
2 3/16
(55.5) 2 3/8 (60)
1 1/2 (37.5)
3 1/8
(80)
Bottom View
-122
5/16
(7.5)
4 1/8
(104)
10 5/16
(261.5)
3
3 1/4
(76) (82.9)
5 15/16
(151.6)
(When the antenna
is pulled out)
Glossary
Advanced intelligent compression
High quality resizing of lower and higher resolution images to fit the projector’s native resolution.
Anti-theft
If the “Keycode” set in the projector is not correctly
entered, the projector will not operate even if
signals are entered.
Aspect Ratio
Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.
Auto Sync
Optimizes projected computer images by automatically adjusting certain characteristics.
Background
Initial setting image projected when no signal is
being output.
Border
Projects a 4:3 image fully within a 16:9 screen by
keeping the aspect ratio at 4:3.
Clock
Clock adjustment is used to adjust vertical noise
when clock level is incorrect.
CLR Temp (Color temperature)
Function that can be used to adjust the color temperature to suit the type of image input to the projector. Decrease the color temperature to create
warmer, reddish images for natural flesh tones,
or increase to create cooler, bluish images for a
brighter picture.
DHCP
Stands for Dynamic Host Configuration Protocol.
Procedure that automatically assigns network
settings such as IP addresses from the server.
Digital Shift
Shifts image up or down easily by Adjustment
buttons (▲, ▼) when RESIZE mode of input image is BORDER, STRETCH or SMART
STRETCH of the video or the DTV signals.
Dot by dot
Mode that projects images in their native resolution.
DVI (Digital Visual Interface)
Freeze
Temporarily freezes a moving image.
Image quality enhancement function that offers a
richer image by brightening the darker portions
of the image without altering the brightness of the
brighter portions. You can select four different
modes: STANDARD, PRESENTATION, CINEMA
and GAME.
Gateway
Device which reays transmissions between different networks.
IEEE802.11b
One of the international standards for wireless
LANs. Allows for wireless transmissions using a
wireless frequency of 2.4GHz and a maximum
speed of 11Mbps.
IP Address
Stands for Internet Protocol address. Code
number for identifying devices connected to the
network. It is displayed as 192.168.0.1 where
every fourth digit is a period.
Keylock Level
Mode that can lock the operation of projector buttons to prevent mischief.
Keystone correction
Function to digitally correct a distorted image
when the projector is set up at an angle,
smoothens out jaggies on keystone images and
compresses the image not only horizontally but
vertically keeping the 4:3 aspect ratio.
Password
A password is set so that changes cannot be made
in the settings of the “Options (2)” menu.
Phase
Phase shift is a timing shift between isomorphic
signals with the same resolution. When phase
level is incorrect, the projected image typically
displays horizontal flicker.
Picture in Picture
Allows you to add video images onto a data screen
image, providing you with even more effective presentations.
Progressive Mode
The progressive display projects a smoother video
image. You can select three different modes: 2D
Progressive, 3D Progressive and Film Mode.
Projector name
Name for identifying the projector. You can any
desirable name using a combination of
alphanumeric characters or symbols (max. 15
characters).
-123
Appendix
Display digital interface that also supports Analog interfaces.
GAMMA
Glossary (cont.)
RESIZE
Allows you to modify or customize the picture display mode to enhance the input image. You can
select six different modes: NORMAL, FULL, DOT
BY DOT, BORDER, STRETCH and SMART
STRETCH.
Smart Stretch
Projects the image fully in a 16:9 screen by enlarging only the surrounding areas while keeping
the aspect ratio in the middle part of the image at
4:3.
sRGB
An international standard of color reproduction
regulated by the IEC (International
Electrotechnical Commission). As the fixed color
area has been decided by the IEC, the color
changes according to DLP features, so that the
images are displayed in a natural tint based on
an original image, when switching to the “sRGB”
mode.
SS ID
Stands for Service Set ID. Name for identifying
“Groups” of devices connected to a wireless LAN.
Wireless data transmissions can be done only with
devices that carry the same SS ID (group name).
You can set any desirable SS ID using a
combination of alphanumeric characters or
symbols (max. 32 characters).
Startup Image
The image displayed when the projector is turned
on.
Status function
Displays the settings of each adjustment item.
Stretch
Mode that stretches the 4:3 image horizontally to
display it fully on a 16:9 screen.
Subnet Mask
A parameter used on a TCP/IP network, that is
used when an IP address is separated into network address and host address.
Wireless channel
A wireless channel is a frequency used by wireless LAN cards in wireless communications. If
other wireless LAN networks are in use near the
location of the projector, make sure that different
channels have been set on both the projector and
the wireless LAN so as to avoid interference.
-124
Index
2D Progressive .................................................... 60
3D Progressive .................................................... 60
AC socket ............................................................. 26
Adjustment buttons .............................................. 14
Adjustment feet .................................................... 22
All Reset ............................................................ 105
Anti-Theft ........................................................... 102
Aspect ratio .......................................................... 83
ASSIGN button .................................................... 41
Autorun ................................................................ 79
Auto Search ......................................................... 90
Auto Sync adjustment .......................................... 63
AUTO SYNC button ............................................. 14
Auto Sync Display ................................................ 64
AV MUTE button .................................................. 14
Background image ............................................... 95
Batteries ............................................................... 17
BORDER .............................................................. 82
Break Timer ......................................................... 97
Carrying case .................................................... 108
Ceiling-mount ....................................................... 25
Clock .................................................................... 61
CLR Temp (Color Temperature) ........................... 59
Color Management .............................................. 89
Computer images adjustment ............................. 61
DHCP server ........................................................ 73
Digital Shift ........................................................... 39
DNR ..................................................................... 91
DOT BY DOT ....................................................... 83
DVI to 15-pin D-sub cable .................................... 27
Eject button .......................................................... 31
ENLARGE ............................................................ 84
ENTER button ...................................................... 14
Exhaust vent ...................................................... 109
Film Mode ............................................................ 60
Fine Sync ............................................................. 61
Focus ring ............................................................ 14
Foot releases ....................................................... 22
FREEZE ............................................................... 81
FULL .................................................................... 83
Function buttons .................................................. 16
INPUT 3 terminal ................................................. 15
INPUT 4 PC card slot .......................................... 15
INPUT button ....................................................... 14
Interval ................................................................. 80
IP Address ........................................................... 66
Kensington Security Standard connector ............ 15
Keylock level ........................................................ 99
Keystone correction (adjustment) ........................ 38
Lamp .................................................................. 111
LAMP REPLACEMENT indicator ...................... 110
Lamp Timer ........................................................ 113
Language selection ............................................. 37
L-CLICK/ENTER button ....................................... 16
LED indicator ....................................................... 42
Lens adjustment .................................................. 37
LENS button ........................................................ 38
Lens cap .............................................................. 15
Lens cap strap ..................................................... 15
Line function ........................................................ 46
MENU button ....................................................... 50
Monitor Out .......................................................... 32
Mute ..................................................................... 36
NORMAL .............................................................. 83
Optional accessories ........................................... 20
OSD Display (On-screen display) ....................... 92
Password ........................................................... 100
PC card ................................................................ 31
PDF ...................................................................... 13
Phase ................................................................... 61
Pict in Pict ............................................................ 88
Picture adjustments ............................................. 59
POINTER button .................................................. 16
Pointer function .................................................... 44
POWER button .................................................... 14
Power cord ........................................................... 20
POWER indicator ............................................... 110
Power Save Mode ................................................ 87
PRJ mode ............................................................ 98
Projector Name .................................................... 69
Progressive Mode ................................................ 60
R-CLICK/UNDO button ........................................ 16
Replacing the lamp ............................................ 111
RESIZE ................................................................ 82
Reversing/Inverting Images ................................. 98
RGB ..................................................................... 59
RF CH+ button ..................................................... 16
Image Capture ..................................................... 94
Index Mode .......................................................... 79
INPUT AUDIO terminal ........................................ 15
INPUT 1 terminal ................................................. 15
INPUT 1 – 4 modes ............................................. 35
INPUT 2 terminal ................................................. 15
Save Setting ......................................................... 61
Script File ............................................................. 79
Select Setting ....................................................... 62
Signal Info ............................................................ 63
Signal Type .......................................................... 59
Slide Show ........................................................... 79
-125
Appendix
GAMMA ............................................................... 86
Gateway ............................................................... 70
GYRO ACTIVE button ......................................... 16
GyroRemote Antenna .......................................... 14
GyroRemote ........................................................ 16
Index (cont.)
SMART STRETCH .............................................. 83
Speaker ................................................................ 14
Special Mode settings ......................................... 62
sRGB ................................................................... 89
SS ID .................................................................... 72
Stamp function ..................................................... 45
Startup image ...................................................... 95
Status ................................................................. 106
STRETCH ............................................................ 83
Subnet Mask ........................................................ 70
Supplied accessories .......................................... 20
TEACH OK button ............................................... 16
TEMPERATURE WARNING indicator ............... 110
Terminal cover ..................................................... 32
TCP/IP ................................................................. 70
Thumbnails display .............................................. 79
UNDO button ....................................................... 14
USB cable ............................................................ 47
USB port .............................................................. 15
View ..................................................................... 79
Video System ....................................................... 93
VOLUME buttons ................................................. 14
Wireless channel ................................................. 67
Wireless LAN ....................................................... 71
Wireless LAN PC card ......................................... 68
Wireless Mouse ................................................... 47
Wired remote terminal ......................................... 16
Zoom knob ........................................................... 14
-126
SHARP CORPORATION
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement