Data Sheet Mixing / Shakers MTS 2/4 digital microtiter shaker Newly developed special shaker for shaking two or four microtiter plates. - Electronic speed control - Digital timer - Alarm to indicate set time has expired - Incl. attachment (without microtiter plate) Accessories: H 11 Mains cable UK plug, H 11 Mains cable CH plug, H 11 Mains cable USA plug, H 11 Mains cable Euro plug Technical Data Type of movement orbital Shaker diameter [mm] 3 Permissible shaking weight (incl. attachment) [kg] 2/4 MT-Platten Motor rating input [W] 35 Motor rating output [W] 13.2 Permissible ON time [%] 100 Speed min (adjustable) [rpm] 50 Speed range [rpm] 0 - 1100 Speed display scale Timer yes Timer display 7 segment LED Time setting range [min] 1 - 99 Operating mode timer and continuous operation Shaking table lock no Working with microtiter plates yes Number of microtiter plates 2 or 4 Dimensions (W x H x D) [mm] 185 x 105 x 320 Weight [kg] 2.7 Permissible ambient temperature [°C] 5 - 40 Permissible relative moisture [%] 80 Protection class according to DIN EN 60529 IP 21 RS 232 interface no Analog output no Voltage [V] 220 - 240 / 100 - 120 Frequency [Hz] 50/60 Power input [W] 45 Ident. No. © IKA® Werke Staufen/Germany 2012 www.ika.com Subject to technical changes 3208000 Thank you for reading this data sheet. For pricing or for further information, please contact us at our UK Office, using the details below. UK Office Keison Products, P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England. Tel: +44 (0)1245 600560 Fax: +44 (0)1245 808399 Email: firstname.lastname@example.org Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project