Pneumatic Push-to-Connect Fittings Features

Pneumatic Push-to-Connect Fittings Features
Prices as of April 27, 2016. Check Web site for most current prices.
Pneumatic Push-to-Connect Fittings
NITRA pneumatic push-to-connect fitting bodies are made
of a strong thermoplastic (PBT) and have stainless steel tube
gripping claws. Threaded components are made of nickelplated brass and have pre-applied Teflon thread sealant
(O-ring on #10-32, M5 and G threads). The bodies of elbow
and tee fittings with threaded connections can be rotated after
installation to allow for variations in piping direction. NITRA
Polyurethane and Nylon 12 tubing is easily connected by
simply inserting the tubing end into the fitting. To release the
tubing, press the circular release ring and the tubing can be
easily pulled out.
Features
• Large selection of fitting configurations
• Inch and metric sizes available
• NPT, BSPT (R), and BSPP (G) threads available
• Tough thermoplastic bodies, stainless steel tube gripping claws,
nickel-plated threads with pre-applied Teflon sealant (O-ring on
#10-32, M5 and G threads)
• Threaded Elbow and Tee bodies can be rotated after installation
• Release rings are color coded to differentiate between inch and
metric sizes
• For use with air only
• Working pressure: -29.5” Hg to 150 psi.
• Working temperature: 32 to 140°F (0 to 60°C)
Tapered Thread Fitting
Cut-away Diagram
Parallel Thread Fitting
Cut-away Diagram
Book 2 (14.3)
ePN-272
Pneumatics
1-800-633-0405
Prices as of April 27, 2016. Check Web site for most current prices.
Pneumatic Push-to-Connect Fittings
Company
Information
Drives
E
NITRA pneumatic push-to-connect union elbow fitting
with thermoplastic (PBT) body and stainless steel tube
gripping claws. For use with polyurethane or nylon
tubing. Five fittings per package.
B
ØP ØD
L
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
ØC
Motor Controls
Inch Fitting
Sensors:
Proximity
NITRA Union Elbow
Inch Sizes - dimensions in inches (in.)
Metric Fitting
Sensors:
Photoelectric
Part No.
Price
Size
øD
øP
L
E
øC
B
Orifice
Package
Weight (lbs)
Qty. per
pack
UL18
UL532*
UL14
UL38
UL12
$7.00
1/8 in.
1/8
0.30
0.70
0.70
0.13
0.44
0.10
0.1
5
$5.25
5/32 in. (4 mm)
5/32
0.41
0.95
0.95
0.13
0.59
0.12
0.1
5
$5.75
1/4 in.
1/4
0.51
1.09
1.09
0.14
0.66
0.19
0.1
5
$8.00
3/8 in.
3/8
0.69
1.35
1.35
0.18
0.79
0.31
0.3
5
$9.00
1/2 in.
1/2
0.83
1.60
1.60
0.18
0.90
0.35
0.4
5
Sensors:
Current
UL6M
UL8M
UL10M
UL12M
UL16M
$5.50
6 mm
5.0
0.2
5
Sensors:
Pressure
$7.00
8 mm (5/16 in.)
8
14.5
31.3
31.3
4.3
18.7
7.0
0.2
5
$8.25
10 mm
10
17.5
33.9
33.9
4.3
20.1
8.0
0.4
5
Metric Sizes - dimensions in millimeters (mm)
6
12.5
27.3
27.3
4.3
16.4
$8.75
12 mm
12
20.5
38.8
38.8
4.3
22.8
10.0
0.4
5
$21.75
16 mm
16
25.5
47.0
47.0
5.3
24.1
13.0
0.4
5
* UL532 has blue release rings
E
NITRA pneumatic push-to-connect union Y fitting
with thermoplastic (PBT) body and stainless steel tube
gripping claws. For use with polyurethane or nylon
tubing. Five fittings per package.
ØP
ØD
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
B
Process
Inch Fitting
Relays and
Timers
L
ØC
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
NITRA Union Y
Metric Fitting
Inch Sizes - dimensions in inches (in)
øD
øP
L
E
øC
B
Orifice
Package
Weight (lbs)
Qty. per
pack
Pneumatics:
Tubing
1/8 in.
1/8
0.30
1.06
0.60
0.13
0.44
0.09
0.1
5
5/32 in. (4 mm)
5/32
0.41
1.43
0.83
0.13
0.63
0.10
0.1
5
Pneumatics:
Air Fittings
1/4 in.
1/4
0.51
1.57
1.02
0.13
0.70
0.16
0.1
5
3/8 in.
3/8
0.69
1.85
1.38
0.18
0.78
0.31
0.4
5
1/2
0.83
2.16
1.65
0.18
0.90
0.41
0.4
5
5
Part No.
Price
Size
UY18
UY532*
UY14
UY38
UY12
$14.00
$9.25
$10.50
$12.50
$16.00
1/2 in.
Metric Sizes - dimensions in millimeters (mm)
UY6M
UY8M
UY10M
UY12M
$8.75
6 mm
6
13.0
39.3
26.0
3.3
17.6
5.2
0.2
$9.25
8 mm (5/16 in.)
8
14.6
44.1
29.2
4.3
19.0
6.8
0.2
5
$12.00
10 mm
10
17.5
47.1
35.0
4.5
19.8
8.0
0.4
5
$15.50
12 mm
12
21.0
54.1
42.0
4.5
22.7
10.3
0.4
5
* UY532 has blue release rings
Book 2 (14.3)
www.automationdirect.com/pneumatic-parts
Pneumatics
ePN-275
Appendix
Book 2
Terms and
Conditions
Prices as of April 27, 2016. Check Web site for most current prices.
Pneumatic Fitting Instructions and
Caution Information
Assembly Instructions
Company
Information
Drives
Soft Starters
Motors
Prepare the NITRA tubing for cutting and make sure to
have the proper tubing cutters like the NITRA TC-12 or
TC-20.
Power
Transmission
Motion: Servos
and Steppers
(If cutting bonded tubing, carefully split the tubes with a
knife and then pull apart as needed.)
Motor Controls
Sensors:
Proximity
Cut the NITRA tubing at a right angle with the axis using a
standard tube cutter. After cutting the tubing, make sure to
check the cut end for an even cut with no debris.
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Insertion of the NITRA tubing into fittings
• Make sure the tube is inserted fully into the fitting.
• Pull the tube gently to make sure it does not release.
• If the tube end is damaged or deformed, leakage or
unexptected tube release may occur. Make sure to check
tubing end thoroughly.
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Removing the NITRA tubing from fittings
• Make sure the pressure in the tube is zero before releasing
the tube from the fittings.
• To release the tubing, press the release ring at the end
of the fitting and pull the tube with one hand.
• Inspect the released tube end and make a clean cut if
it is damaged or deformed.
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Common Precautions for Tubing and Fitting Products
Process
Warnings:
Relays and
Timers
• Do not use fittings with media other than air.
• Avoid installing with tubing under tension or with excessive bends.
• Do not use the product where weld spatters occur as fire may occur.
• Product damage or air leakage may occur at places where there is excessive rotation or vibration of the fittings.
• Use caution in water as the product may be damaged by surge pressure.
• Do not use the product where it is directly exposed to fluids such as cutting oil, lubricating oil, and coolant oil.
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Cautions:
• Assemble the tubing only after cleaning away impurities such as dust and excess debris.
• Fitting products are recommended for air systems only. Avoid using for other purposes.
• When using tubing other than NITRA brand with NITRA fittings, be sure the tubing OD conforms to the tolerances
in Table 1 below.
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Table 1 - Tolerance of the Outer Diameter of the Tube
Tube Specifications
Permissible tolerance
ø5/32 [ø4]
ø1/4 [ø6]
ø5/16 [ø8]
ø3/8 [ø10]
Appendix
Book 2
ø1/2 [ø12]
TC-12
+ 0.005 [+/- 0.13]
Terms and
Conditions
Pneumatic Tubing Cutter
Part Number
Description
Pcs/Pkg
Wt (lb)
Price
TC-12
NITRA pneumatic tubing cutter for use with 1/8 to 1/2 inch and 4 to 12
mm outside diameter flexible plastic tubing.
1
0.1
$4.25
TC-20
NITRA pneumatic heavy duty tubing cutter for use with polyurethane,
nylon and other flexible tubing up to 2 inch [50mm] outside diameter.
1
0.2
$7.25
TC-20
Book 2 (14.3)
www.automationdirect.com/pneumatic-parts
Pneumatics
ePN-271
Prices as of April 27, 2016. Check Web site for most current prices.
NITRA® Pneumatic Air Fittings
Company
Information
A variety of fittings are available including:
Drives
Soft Starters
Motors
Power
Transmission
UNION STRAIGHT
UNION REDUCER
UNION TEE
MANUAL HAND VALVE
STOP VALVE
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
CHECK VALVE
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
from $5.75
from $7.25
from $8.00
from $13.00
from $27.00
from $29.00
(5 pack) (USxxx)
(5 pack) (URxxx)
(5 pack) (UTxxx)
(2 pack) (HVUxxx)
(5 pack) (SVUxxx)
(5 pack) (CVUxxx)
Push-to-Connect Fittings
UNION TEE REDUCER
UNION ELBOW
UNION Y
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
from $8.25
from $5.25
from $8.75
(5 pack) (UTRxxx)
(5 pack) (ULxxx)
(5 pack) (UYxxx)
UNION Y REDUCER
UNION CROSS
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
from $11.50
from $13.50
(5 pack) (URYxxx)
(5 pack) (UXxxx)
UNION
TRIPLE
BRANCH
NITRA™ Pneumatic Fittings
from $18.50
(5 pack) (U3Bxxx)
BULKHEAD UNION
PLUG
PLUG-IN REDUCER
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
from $12.00
from $2.75
from $4.75
(5 pack) (UBxxx)
(5 pack) (PLUGxxx)
(5 pack) (PRxxx)
NITRA Pneumatic Push-to-Connect Fitting bodies are made of a
strong thermoplastic (PBT) and have stainless steel tube gripping
claws. Threaded components are made of nickel-plated brass
and have pre-applied Teflon thread sealant.
The bodies of elbow and tee fittings with threaded connections
can be rotated after installation to allow for variations in piping
direction. NITRA Polyurethane and Nylon 12 tubing is easily
connected by simply inserting the tubing end into the fitting. To
release the tubing press the circular release ring and the tubing
can be easily pulled out.
• Large selection of fitting configurations, including union, plug-in,
straight, elbow, branch, and stop, hand and check valves
• Inch and metric sizes available
• NPT and BSPT (R) and BSPP (G) threads available
• Tough thermoplastic bodies, stainless steel tube
gripping claws, nickel-plated threads with
pre-applied Teflon sealant
• Elbow and Tee bodies can be rotated after installation
• Rings are color coded to differentiate between inch
and metric sizes
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
MALE STRAIGHT
FEMALE STRAIGHT
MALE ELBOW
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
from $4.25
from $8.00
from $6.00
(5 pack) (MSxxx)
(5 pack) (FSxxx)
(5 pack) (MExxx)
LONG MALE ELBOW
FEMALE ELBOW
MALE BRANCH TEE
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
from $10.50
from $12.00
from $9.75
(5 pack) (MELxxx)
(5 pack) (FExxx)
(5 pack) (MBTxxx)
MALE RUN TEE
MALE Y
BULKHEAD FEMALE
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
NITRA™ Pneumatic Fittings
from $11.00
from $11.00
from $14.00
(5 pack) (MRTxxx)
(5 pack) (MYxxx)
(5 pack) (FBxxx)
ELBOW METER-IN
ELBOW METER-OUT
IN-LINE (STRAIGHT)
NITRA™ Flow Control Valve
NITRA™ Flow Control Valve
NITRA™ Flow Control Valve
from $8.25
from $8.25
from $12.00
(2 pack) (FVRxxx)
(2 pack) (FVSxxx)
(2 pack) (FVUxxx)
Push-to-Connect Flow Control
(Speed Controller) Valves
Book 2 (14.3)
Pneumatics
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
NITRA Pneumatic Push-to-Connect Flow Control (Speed Controller)
Valves provide accurate airflow regulation for precise motion control
of pneumatic cylinders. NITRA flow control valve bodies are made
of strong thermoplastic (PBT) and have stainless steel tube gripping
claws. Threaded components are nickel-plated brass and have preapplied Teflon thread sealant. Flow control valve bodies can be
rotated after installation to allow for variations in piping direction.
• Meter-in , meter-out and in-line configurations
• Inch and metric sizes available
• NPT and BSPT (R) and BSPP (G) threads available
• Tough thermoplastic bodies, stainless steel tube
gripping claws, nickel-plated threads with
pre-applied Teflon sealant
• Bodies can be rotated after installation
• Release rings are color coded to differentiate
between meter-in and meter-out
www.automationdirect.com/pneumatic-parts
Relays and
Timers
ePN-269
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising