PGA/BGA/PLCC Sockets

PGA/BGA/PLCC Sockets
PGA / BGA / PLCC
SOCKETS
PGA / BGA / PLCC SOCKETS
QUICK SELECTOR CHART
PGA / BGA / PLCC
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
PGA
GRID
2.54 mm
INTERSTITIAL
SOCKETS
Solder tail
BGA
1.27 mm
1.27 mm
PLCC
1 mm
SEE PAGE
156
161
165
173
Surface mount
156
161
165
166
169
172
Solderless compliant
press-fit
157
161
Carrier
158
162
Interconnect pin
158
162
165
167
Interconnect pin
surface mount
167
169
BGA pin-adapter
166
169
154
Due to technical progress, all information provided is subject to change without prior notice.
PGA / BGA / PLCC
GENERAL SPECIFICATIONS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
The values listed below are general specs applying for PRECI-DIP PGA, BGA and PLCC sockets. Please see individual catalog page for additional
and product specific technical data.
OPERATING TEMPERATURE RANGE
CLIMATIC CATEGORY (IEC)
OPERATING HUMIDIT Y RANGE
MA X. WORKING VOLTAGE
-55 ... +125 °C
55/125/21
Annual mean 75%
100 VRMS /150 VDC (2.54 mm grid)
PRECI-DIP connectors designated « Series Preci-Dip Connector » are recognized by UL LLC and listed under « Connectors for Use
in Data, Signal, Control and Power Applications », File Nr. E174442.
PACKAGING
MECHANICAL CHARACTERISTICS
Min. 40 N (no displacement under axial force applied)
Min. 3.3 N acc. to MIL-DTL-83734, pt 4.6.4.2
CLIP RETENTION
CONTACT RETENTION
ELECTRICAL CHARACTERISTICS
INSUL ATION RESISTANCE BETWEEN ANY TWO ADJACENT CONTACTS
CAPACITANCE BETWEEN ANY TWO ADJACENT CONTACTS
SELF INDUCTANCE PER CONTACT
šS tandard packaging for PGA, BGA and PLCC sockets
is tube packaging.
šSMD mount sockets available on request
with Tape & Reel packaging acc. to EIA Standard 481.
These products are marked with the symbol:
Min. 10’000 M: at 500 VAC
Max. 1 pF (PLCC max. 2 pF)
Max. 2 nH
T & R Packaging
ENVIRONMENTAL CHARACTERISTICS
Please consult www.precidip.com for availability
size of tape, size of reel, number of components
per reel, packing units and part numbers.
PGA / BGA / PLCC SOCKETS
The sockets withstand the following environmental tests without mechanical
and electrical defects:
šDry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16 h
šD amp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH,
1 cycle of 24 h
šCold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h
šThermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min.
šSinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g,
1 octave/min., 10 cycles for each axis
šShock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis
During the above two tests, no contact interruption >50 ns does appear.
šSolderability J-STD-002A, Test A, 245 °C, 5 s, solder alloy SnAg3.8Cu0.7
šResistance to soldering heat J-STD-020C, 260 °C, 20 s
šMoisture sensitivity J-STD-020C level 1
šResistance to corrosion:
1) Salt spray test IEC 60068-2-11.Ka: 48 h
2) Sulfur dioxide (SO2) test IEC 60068-2-42 Kc: 96 h at 25 ppm SO2,
25 °C, 75 %rH
3) Hydrogen sulfide (H2S) test IEC 60068-2-43 Kd: 96 h at 12 ppm H2S,
25 °C, 75 %rH
SOLDERLESS COMPLIANT PRESS-FIT CHARACTERISTICS
PRESS-FIT CHARACTERISTICS MEASURED ACC. TO IEC 60352-5
šPress-in force:
šPush-out force:
šPush-out 3rd cycle:
90 N max. (at min. hole dia.) / 65 N typ.
30 N min. (at max. hole dia.) / 50 N typ.
20 N min. (at max. hole dia.)
PCB HOLE DIMENSIONS
š2.54 mm grid
šInterstitial grid
Finished hole Ø: 1 + 0.09/-0.06 mm
Drilled hole Ø: 1.15 ± 0.025 mm
Finished hole Ø: 0.7 + 0.09/-0.06 mm
Drilled hole Ø: 0.8 ± 0.02 mm
PCB HOLE PL ATING
PCB surface finish
šTin
šCopper
šGold over nickel
Hole plating
5-15 μm tin over min. 25 μm copper
min. 25 μm copper
0.05-0.2 μm gold over 2.5-5 μm nickel
over min. 25 μm copper
Due to technical progress, all information provided is subject to change without prior notice.
155
PIN GRID ARRAY SOCKETS
SOLDER TAIL / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
Pin grid array sockets, standard solder version and surface mount with floating contacts.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
0.7 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
DIMENSIONS
Calculate with n1 = number of contacts in one line and n2 =
characteristic size of the window
A = n1x2.54
B = (n1-1)x2.54
C = (n2x2.54)-0.40
Other plating on request (see page 178 for plating specs).
Replace NNN with the number of poles and XX-XXX with body size
and layout numbers as indicated on pages 159 to 160.
For example a 17x17 pin configuration with window and 168 contacts
as shown on page 160 becomes 510-83-168-17-101101.
Options: please consult for availability
- PGA sockets with optional standoffs
- PGA sockets with solder tails, length 4.2 mm
- PGA sockets with low profile contacts and solder tails of 2.8 mm length
- PGA interconnect sockets with other contact lengths.
510-PP-NNN-XX-XXX101
PGA sockets with standard solder tails, length 3.17 mm.
514-PP-NNN-XX-XXX117
PGA sockets with self-aligning SMD floating contacts.
Contact diameter of soldering end 0.98 mm, allowing PCB pads
as small as 1.1 mm.
156
Due to technical progress, all information provided is subject to change without prior notice.
PIN GRID ARRAY SOCKETS
PRESS-FIT TERMINATIONS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
Pin grid array sockets with compliant press-fit terminations.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
Beryllium copper (C17200)
0.40 to 0.56 mm
0.7 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
Replace NNN with the number of poles and XX-XXX with body size
and layout numbers as indicated on pages 159 to 160.
For example a 17x17 pin configuration with window and 168 contacts
as shown on page 160 becomes 546-83-168-17-101136.
DIMENSIONS
Calculate with n1 = number of contacts in one line and n2 =
characteristic size of the window
A = n1x2.54
B = (n1-1)x2.54
C = (n2x2.54)-0.40
PGA / BGA / PLCC SOCKETS
546-PP-NNN-XX-XXX136
PGA sockets with solderless compliant press-fit terminations
for 1.5 to 2.0 mm PCB thickness.
Hole diameter 1 (+0.09/-0.06) mm after metallization
(Drill diameter 1.15±0.025 mm).
546-PP-NNN-XX-XXX135
PGA sockets with solderless compliant press-fit terminations
for 2.1 to 3.2 mm PCB thickness.
Hole diameter 1 (+0.09/-0.06) mm after metallization
(Drill diameter 1.15±0.025 mm).
Due to technical progress, all information provided is subject to change without prior notice.
157
PIN GRID ARRAY SOCKETS
INTERCONNECT PIN AND CARRIERS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
Pin grid array sockets, interconnect pin and carriers with disposable plastic body.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (3 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
0.8 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10 (Serie 550)
80 (Serie 550)
0.25 μm gold
Tin
0.25 μm gold
Tin
PP PL ATING CODE
SLEEVE
CLIP
87 (Serie 614)
83 (Serie 614)
Tin
Tin
Flash gold
0.75 μm gold
DIMENSIONS
Calculate with n1 = number of contacts in one line and n2 =
characteristic size of the window
Other plating on request (see page 178 for plating specs).
Replace NNN with the number of poles and XX-XXX with body size
and layout numbers as indicated on pages 159 to 160.
For example a 17x17 pin configuration with window and 168 contacts
as shown on page 160 becomes 550-10-168-17-101101.
Options: please consult for availability
- PGA interconnect sockets with other contact lengths
- PGA carrier sockets with other contacts.
A = n1x2.54
B = (n1-1)x2.54
C = (n2x2.54)-0.40
550-PP-NNN-XX-XXX101
PGA interconnect sockets with through hole solder tails
and connecting pin Ø 0.47 mm.
614-PP-NNN-XX-XXX112
PGA carrier sockets with disposable plastic body.
Low profile ultra thin contacts with solder termination Ø 0.95 mm
that requires Ø 1 mm holes in PCB.
158
Due to technical progress, all information provided is subject to change without prior notice.
PIN GRID ARRAY SOCKETS
2.54 mm GRID / FOOTPRINTS / TOP VIEW
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
5x5
…-012-05-001…
10x10
…-064-10-051…
10x10
…-068-10-061…
10x10
…-084-10-031…
11x11
…-068-11-061…
11x11
…-073-11-061…
11x11
…-084-11-042…
11x11
…-085-11-041…
13x13
…-088-13-081…
13x13
…-100-13-062…
13x13
…-100-13-063…
13x13
…-101-13-061…
13x13
…-114-13-061…
13x13
…-121-13-061…
13x13
…-124-13-041…
13x13
…-128-13-041…
13x13
…-132-13-041…
13x13
…-144-13-041…
14x14
…-132-14-071…
14x14
…-133-14-071…
15x15
…-145-15-081…
15x15
…-149-15-063…
15x15
…-177-15-061…
15x15
…-181-15-051…
16x16
…-175-16-072…
Due to technical progress, all information provided is subject to change without prior notice.
13x13
…-114-13-062…
PGA / BGA / PLCC SOCKETS
WWW.PRECIDIP.COM
15x15
…-176-15-061…
159
PIN GRID ARRAY SOCKETS
2.54 mm GRID / FOOTPRINTS / TOP VIEW
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
17x17
…-168-17-101…
17x17
…-169-17-101…
17x17
…-192-17-081…
17x17
…-207-17-081…
17x17
…-208-17-081…
17x17
…-209-17-081…
18x18
…-179-18-111…
18x18
…-179-18-112…
18x18
…-191-18-091…
18x18
…-223-18-091…
18x18
…-224-18-091…
18x18
…-225-18-091…
19x19
…-238-19-101…
19x19
…-280-19-081…
19x19
…-281-19-081…
20x20
…-257-20-111…
20x20
…-299-20-091…
18x18
…-241-18-071…
21x21
…-273-21-121…
160
Due to technical progress, all information provided is subject to change without prior notice.
PIN GRID ARRAY SOCKETS
INTERSTITIAL / SOLDER TAIL / SURFACE MOUNT
PRESS-FIT TERMINATIONS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
Pin grid array sockets with interstitial contact rows, solder tails, surface mount floating contacts and solderless compliant.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
(Bronze CuSn4Pb4Zn4 (C54400)
for press-fit contacts)
Beryllium copper (C17200)
0.40 to 0.56 mm
0.4 N typ. insertion
0.2 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 700 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
DIMENSIONS
Calculate with n1 = number of contacts on the external row and n2 =
characteristic size of the window
Other plating on request (see page 178 for plating specs).
Replace NNN with the number of poles and XX-XXX with body size
and layout numbers as indicated on pages 163 to 164.
For example a 19x19 pin configuration with window and 296 contacts
as shown on page 163 becomes 517-83-296-19-131111.
Options: please consult for availability
- PGA sockets with optional standoffs.
A = (n1x2.54)+1.30
B = (n1-1)x2.54
C = (n2x2.54)-0.40
PGA / BGA / PLCC SOCKETS
517-PP-NNN-XX-XXX111
Interstitial PGA sockets with through hole solder tails,
length 3.17 mm.
514-PP-NNN-XX-XXX154
Interstitial PGA sockets with self-aligning SMD floating contacts.
Contact diameter of soldering end 0.8 mm allowing PCB pads
with 0.9 mm diameter.
546-PP-NNN-XX-XXX147
Interstitial PGA sockets with solderless compliant press-fit
terminations for 1.2 to 2.5 mm PCB thickness.
Hole diameter 0.7 (+0.07/-0.05) mm after metallization
(Drill diameter 0.85±0.025 mm).
Due to technical progress, all information provided is subject to change without prior notice.
161
PIN GRID ARRAY SOCKETS
INTERSTITIAL / INTERCONNECT PIN AND CARRIER
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
Pin grid array sockets with intersitial contact rows, interconnect pin and carriers with disposable plastic body.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
SLEEVE / PIN
CONTACT CLIP (3 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
0.3 N typ. insertion
0.15 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 700 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10 (Serie 550)
80 (Serie 550)
0.25 μm gold
Tin
0.25 μm gold
Tin
PP PL ATING CODE
SLEEVE
CLIP
87 (Serie 614)
83 (Serie 614)
Tin
Tin
Flash gold
0.75 μm gold
DIMENSIONS
Calculate with n1 = number of contacts on the external row and n2 =
characteristic size of the window
Other plating on request (see page 178 for plating specs).
Replace NNN with the number of poles and XX-XXX with body size
and layout numbers as indicated on pages 163 to 164.
For example a 19x19 pin configuration with window and 296 contacts
as shown on page 163 becomes 550-10-296-19-131135.
Options: please consult for availability
- PGA pin header interconnect sockets with other contact lengths
- PGA carrier sockets with other contacts.
A = (n1x2.54)+1.30
B = (n1-1)x2.54
C = (n2x2.54)-0.40
550-PP-NNN-XX-XXX135
Interstitial PGA interconnect sockets with through hole solder tails
and connecting pin Ø 0.44 mm.
614-PP-NNN-XX-XXX144
Interstitial PGA carrier sockets with disposable plastic body
and low profile, ultra-thin contacts with Ø 0.84 mm
that requires Ø min 0.9 mm PCB holes.
162
Due to technical progress, all information provided is subject to change without prior notice.
PIN GRID ARRAY SOCKETS
INTERSTITIAL / FOOTPRINTS / TOP VIEW
WWW.PRECIDIP.COM
14x14
…-183-14-091…
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
14x14
…-304-14-051…
14x14
…-365-14-000…
17x17
…-321-17-101…
17x17
…-364-17-091…
17x17
…-365-17-091…
17x17
…-545-17-000…
18x18
…-280-18-101…
18x18
…-293-18-101…
18x18
…-305-18-101…
18x18
…-325-18-111…
18x18
…-361-18-101…
18x18
…-369-18-091…
18x18
…-391-18-101…
18x18
…-431-18-091…
19x19
…-296-19-131…
19x19
…-320-19-131…
19x19
…-321-19-121…
19x19
…-370-19-121…
19x19
…-372-19-111…
19x19
…-401-19-111…
Due to technical progress, all information provided is subject to change without prior notice.
163
PGA / BGA / PLCC SOCKETS
16x16
…-299-16-091…
PIN GRID ARRAY SOCKETS
INTERSTITIAL / FOOTPRINTS / TOP VIEW
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
19x19
…-403-19-111…
19x19
…-419-19-111…
19x19
…-420-19-111…
19x19
…-428-19-101…
20x20
…-411-20-111…
20x20
…-447-20-121…
20x20
…-539-20-101…
20x20
…-557-20-091…
21x21
…-475-21-121…
21x21
…-528-21-121…
21x21
…-529-21-121…
21x21
…-565-21-111…
22x22
…-503-22-131…
22x22
…-559-22-131…
19x19
…-429-19-101…
19x19
…-463-19-101…
24x24
…-599-54-131…
164
Due to technical progress, all information provided is subject to change without prior notice.
MICRO PIN GRID ARRAY
SOCKETS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
1.27 mm GRID / SOLDER TAIL / SURFACE MOUNT / INTERCONNECT PIN
SALES@PRECIDIP.COM
Micro pin grid array sockets (μPGA) with contacts placed on 1.27 mm grid, solder tail, surface mount and interconnect pin.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
SLEEVE / PIN
CONTACT CLIP (6 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Glass-epoxy laminate FR4
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.30 to 0.35 mm
0.2 N typ. insertion
0.15 N typ. withdrawal
(polished steel gauge Ø 0.3 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 500 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
77 (Serie 518)
Flash gold
Flash gold
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10 (Serie 558)
0.25 μm gold
0.25 μm gold
DIMENSIONS
Calculate with n1 = number of contacts in one line and n2 =
characteristic size of the window
Other plating on request (see page 178 for plating specs).
Replace NNN with the number of poles and XX-XXX with body size
and layout numbers as indicated on page 168.
For example a 26x26 pin configuration with window and 478 contacts
as shown on page 168 becomes 518-77-478M26-131105.
Options: please consult for availability
- μPGA interconnect headers for SMD mount.
A = (n1x1.27)+1.27
B = (n1-1)x1.27
C = (n2x1.27)-0.40
PGA / BGA / PLCC SOCKETS
518-77-NNNMXX-XXX105
μPGA sockets 1.27 mm grid with through hole solder tails length 2.79 mm.
518-77-NNNMXX-XXX106
μPGA sockets 1.27 mm grid, surface mount.
Contact diameter of soldering end 0.31 mm allowing PCB pads with
0.4 mm diameter.
558-10-NNNMXX-XXX101
μPGA 1.27 mm grid, interconnect sockets with through hole solder tail
and connecting pin Ø 0.31 mm.
Due to technical progress, all information provided is subject to change without prior notice.
165
BALL GRID ARRAY SOCKETS
1.27 mm GRID / SURFACE MOUNT / SOCKET AND ADAPTER
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
Ball grid array sockets and adapters, surface mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
SLEEVE / PIN
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Glass-epoxy laminate FR4
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.36 to 0.46 mm
0.3 N typ. insertion
0.15 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 500 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87 (Serie 514)
83 (Serie 514)
Tin
Tin
Flash gold
0.75 μm gold
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10 (Serie 550)
80 (Serie 550)
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
Replace NNN with the number of poles and XX-XXX with body size
and layout numbers as indicated on page 168.
For example a 20x20 pin configuration with 256 contacts as shown
on page 168 becomes 514-83-256M20-001148.
DIMENSIONS
Calculate with n1 = number of contacts in one line
for sockets
A = (n1x1.27)+1.27
B = (n1-1)x1.27
for adapters
A = (n1x1.27)+3.27
B = (n1-1)x1.27
514-PP-NNNMXX-XXX148
BGA sockets 1.27 mm grid with self-aligning surface mount floating contacts.
Same foot print as the BGA device, to mate with the corresponding adapter.
550-10-NNNMXX-XXX166
BGA adapter 1.27 mm grid pluggable into the corresponding socket.
Connecting pin Ø 0.42 mm.
BGA device is SMD soldered on the solder pads.
Ž
BGA socket and adapter systems are the reliable solution to make BGAs pluggable:
- the BGA socket Series 514 Πis soldered to the PCB in place of the BGA device
and using the same footprint
- the BGA device Ž is soldered to the adapter Series 550 
- the BGA + adapter sub-assembly is plugged into the socket

166
Œ
Due to technical progress, all information provided is subject to change without prior notice.
BALL GRID ARRAY SOCKETS
1.27 mm GRID / INTERCONNECT PIN / SOLDER TAIL / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
Ball grid array interconnect pin, through hole solder tail and surface mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
CONTACT
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Glass-epoxy laminate FR4
UL 94V-O
Brass CuZn36Pb3 (C36000)
Min. 100 cycles
1A
Max. 10 m:
Min. 500 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
0.25 μm gold
0.25 μm gold
Other plating on request (see page 178 for plating specs).
Replace NNN with the number of poles and XX-XXX with body size
and layout numbers as indicated on page 168.
For example a 20x20 pin configuration with 256 contacts as shown
on page 168 becomes 550-10-256M20-001152.
DIMENSIONS
Calculate with n1 = number of contacts in one line
A = (n1x1.27)+3.27
B = (n1-1)x1.27
PGA / BGA / PLCC SOCKETS
550-10-NNNMXX-XXX152
BGA interconnect sockets 1.27 mm grid, through hole solder tails
and connecting pin Ø 0.40 mm.
558-10-NNNMXX-XXX104
BGA interconnect sockets 1.27 mm grid, with surface mount terminations
and connecting pin Ø 0.41 mm.
Due to technical progress, all information provided is subject to change without prior notice.
167
BALL/PIN GRID ARRAY
SOCKETS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
16x16
…-192M16-001…
16x16
…-255M16-001…
19x19
…-357M19-001…
19x19
…-360M19-001…
20x20
…-400M20-000…
26x26
…-352M26-001…
26x26
…-356M26-001…
29x29
…-480M29-001…
29x29
…-504M29-001…
31x31
…-432M31-001…
31x31
…-520M31-001…
168
1.27 mm GRID / FOOTPRINTS / TOP VIEW
SALES@PRECIDIP.COM
16x16
…-256M16-000…
20x20
…-256M20-001…
17x17
…-120M17-001…
17x17
…-233M17-001…
20x20
…-272M20-001…
20x20
…-292M20-001…
23x23
…-304M23-001…
23x23
…-385M23-001…
26x26
…-388M26-001…
26x26
…-420M26-001…
26x26
…-456M26-001…
30x30
…-500M30-001…
30x30
…-576M30-001…
33x33
…-560M33-001…
35x35
…-600M35-001…
31x31
…-956M31-001…
24x24
…-575M24-001…
26x26
…-478M26-131…
35x35
…-652M35-001…
Due to technical progress, all information provided is subject to change without prior notice.
BALL GRID ARRAY SOCKETS
1 mm GRID / SURFACE MOUNT SOCKET, ADAPTER / INTERCONNECT PIN
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
Ball grid array sockets and adapter surface mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
SLEEVE / PIN
CONTACT CLIP (3 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Glass-epoxy laminate FR4
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.20 to 0.30 mm
0.4 N typ. insertion
0.2 N typ. withdrawal
(polished steel gauge Ø 0.25 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 500 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
11 (Serie 514)
0.25 μm gold
0.25 μm gold
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10 (Serie 558)
0.25 μm gold
0.25 μm gold
Other plating on request (see page 178 for plating specs).
Please consult for complete part number and available footprints.
Options: please consult for availability
- Through hole adapter.
DIMENSIONS
Calculate with n1 = number of contacts in one line
A = n1+2.81
B = n1-1
PGA / BGA / PLCC SOCKETS
514-11-NNNPXX-XXX159
BGA sockets 1 mm grid, surface mount.
Same foot print as the BGA device to mate with the corresponding
adapter.
558-10-NNNPXX-XXX102
BGA adapter 1 mm grid, pluggable into the corresponding socket.
Connecting pin Ø 0.25 mm.
BGA device is SMD soldered on the solder pads.
558-10-NNNPXX-XXX103
BGA interconnect sockets 1 mm grid with surface mount terminations
and connecting pin Ø 0.25 mm.
Due to technical progress, all information provided is subject to change without prior notice.
169
BALL/PIN GRID ARRAY
SOCKETS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
PART NUMBER IDENTIFICATION
SALES@PRECIDIP.COM
TYPE OF SOCKET
Standard PGA, Interstitial PGA and μPGA
PAGE
510-...01
514-...34
514-...54
517-...11
518-...05
518-...06
546-...35
546-...36
546-...47
550-...01
550-...35
558-...01
614-...12
614-...44
Solder pin 2.54 mm grid
SMD 2.54 mm grid
SMD interstitial
Solder pin interstitial
Solder pin 1.27 mm grid
SMD 1.27 mm grid
Press-fit 2.54 mm, PCB 2.1-3.2 mm
Press-fit 2.54 mm, PCB 1.5-2.0 mm
Press-fit interstitial
Interconnect, solder pin, 2.54 mm grid
Interconnect, solder pin, interstitial
Interconnect, solder pin, 1.27 mm grid
Carrier 2.54 mm grid
Carrier interstitial
156
156
161
161
165
165
157
157
161
158
162
165
158
162
Socket SMD, 1.27 mm grid
Socket SMD, 1 mm grid
Adapter, 1.27 mm grid
Interconnect, solder pin, 1.27 mm grid
Adapter, 1 mm grid
Interconnect SMD, 1 mm grid
Interconnect SMD, 1.27 mm grid
166
169
166
167
169
169
167
BGA
514-...48
514-...59
550-...66
550-...52
558-...02
558-...03
558-...04
XXX – PP – NNN X XX – XXX 1 XX
PLATING CODE ROHS COMPLIANT
PARTS
CODE
SLEEVE
CLIP
77
83
87
Flash gold
Tin
Tin
Flash gold
0.75 μm gold
Flash gold
10
80
170
TERMINATION
CONNECTING PIN
0.25 μm gold
Tin
0.25 μm gold
Tin
TOTAL
NUMBER
OF PINS
Grid:
SIZE OF
BODY
SIZE OF WINDOW AND FOOTPRINT
– 2.54 mm or interstitial
M 1.27 mm grid
P 1 mm grid
See pages 159, 160, 163, 164 and 168 for most popular footprints.
Due to technical progress, all information provided is subject to change without prior notice.
BALL/PIN GRID ARRAY
SOCKETS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SALES@PRECIDIP.COM
If the desired footprint does not exist in this catalogue,
please photocopy this page, complete it and send it to your
local PRECI-DIP distributor.
CUSTOM GRID DESIGN
Your address
ORDERING INFORMATION
Type of socket (see opposite page)
Plating code PP (see opposite page)
Grid
Standard 2.54 mm
Interstitial
1.27 mm
1 mm
Size of body
TOP VIEW
PGA / BGA / PLCC SOCKETS
x
Semiconductor device used
Quantity
EXAMPLE
Fill in the position
of pins
Mark of the
window
Due to technical progress, all information provided is subject to change without prior notice.
171
SOCKETS FOR PLASTIC LEADED
CHIP CARRIERS (PLCC)
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SMT TERMINATIONS
SALES@PRECIDIP.COM
Series 540 PLCC sockets with SMT terminations come with square sizes for IC-packages according to JEDEC MO-047 and rectangular size (32) according
to JEDEC MO-052, low profile.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
CAPACITANCE
Glass filled thermoplastic PPS-GF30-FR
UL 94V-O
Phosphor bronze
Min. 1.5 N per contact
Min. 50 cycles
1A
Max. 20 m:
Min. 600 VRMS
Min. 5’000 M:
Max. 2 pF
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONTACT PRESSURE
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
INSUL ATION RESISTANCE
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONTACT
88
Tin
Tin
Option: parts with positioning pegs add suffix -2 to part number (only
available for No. of poles 32, 44, 68 and 84).
Tape & Reel packaging:
See
page 155
add suffix -TR to part number.
T & R Packaging
NO. OF POLES
A1/A2
20
28
14.86 7.02 9.20 4.60
17.34 9.50 11.76 4.60
16.95 / 9.40 / 11.60 /
3.80
19.50 11.90 14.20
22.42 14.50 16.70 4.60
25.40 17.24 19.46 4.60
30.54 22.26 24.40 4.60
35.56 27.34 29.58 4.60
32*
* RECTANGUL AR
44
52
68
84
B1/B2
C1/C2
D
E
ORDER CODES
16.00
19.70
540-88-020-17-400
540-88-028-17-400
22.00
540-88-032-17-400
27.00
30.80
37.65
45.10
540-88-044-17-400
540-88-052-17-400
540-88-068-17-400
540-88-084-17-400
PCB LAYOUT SERIES 540, SMD TYPES
172
Due to technical progress, all information provided is subject to change without prior notice.
SOCKETS FOR PLASTIC LEADED
CHIP CARRIERS (PLCC)
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SOLDER TAIL
SALES@PRECIDIP.COM
Series 540 PLCC sockets, solder tail, with precision stamped contacts providing component retention thanks to positive spring action.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 155)
INSUL ATOR
FL AMMABILIT Y
CONTACT
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
INSUL ATION RESISTANCE
CAPACITANCE
Glass filled thermoplastic PPS-GF40-FR
UL 94V-O
Phosphor bronze
Min. 25 cycles
1A
Max. 30 m:
Min. 500 VRMS
Min. 1’000 M:
Max. 1 pF
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONTACT
88
Tin
Tin
* RECTANGUL AR
NO. OF
POLES
A1
A2
B1
B2
C1
C2
D
ORDER CODES
28
32*
44
52
68
84
18.09
18.04
23.10
25.70
30.80
35.95
18.09
20.60
23.10
25.70
30.80
35.95
7.62
7.62
12.70
15.24
20.32
25.40
7.62
10.16
12.70
15.24
20.32
25.40
11.20
11.20
16.20
18.80
23.70
28.90
11.20
13.60
16.20
18.80
23.70
28.90
22.12
23.12
29.12
32.85
39.90
47.40
540-88-028-24-008
540-88-032-24-008
540-88-044-24-008
540-88-052-24-008
540-88-068-24-008
540-88-084-24-008
Due to technical progress, all information provided is subject to change without prior notice.
PGA / BGA / PLCC SOCKETS
PCB HOLE PATTERNS SERIES 540, THRU-HOLE TYPES
173
www.preci-dip.com
PHONE
PRECI- DIP SA Rue Saint-Maurice 34 P.O.Box 341 CH-2800 Delémont / Switzerland
+41 (0)32 421 04 00 FA X +41 (0)32 421 04 01 E - M A I L sales@precidip.com www.precidip.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising