Model MW-1 Catalog Page

Model MW-1 Catalog Page
TEST & DATA
®
PORTABLE WIND METER
21/32 [16.67]
6-3/4
[171.48]
Hold this way
for low scale reading
For high scale reading,
finger covers hole
The Portable SERIES WIND METER is used to indicate wind speed and is ideal for
yachtsmen, outdoors-men, and farmers. By holding the meter at eye level with the
back of the unit to the wind, the white ball in the tube indicates wind speed. The meter
has two scales for maximum accuracy.
FEATURES/BENEFITS
• Direct reading requires no calculations
• Dual scales to fit any requirement
APPLICATIONS
• Fishing, hunting, golf
Dimensions: 5/8˝ W X 6-3/4˝ H X 17/32˝ D
MODEL CHART
Model
Scale
Wind Meter-MPH mph
Wind Meter-KNOT knots
Wind Meter-KPH
kph
Wind Meter-MPS
mps
Note: Standard discounts do not
apply to the windmeter. Sporting
goods dealers and distributors:
Contact factory for quantity discounts.
ACCESSORY
Model Description
A-376 Replacement floats for
windmeter, tube of 3
POCKET WIND METER
Measures Wind Speed and Temperature, Wide Range
Wind Meters
1-37/64
[40.08]
4-1/8
[104.78]
The MODEL MW-1 Pocket Wind Meter measures wind speed and temperature via the
integral vane and thermo-anemometer sensor. Users can view readings on the fourdigit LCD with wind speed bar graph and select units for air velocity and temperature.
The MW-1 also features automatic shut-off, detailed instruction manual, and protective
plastic water resistant housing that floats.
FEATURES/BENEFITS
• User selectable units to fit any requirement
• Auto shut-off to conserve battery life
• Water resistant plastic housing floats
APPLICATIONS
• Balancing applications
• Energy audits
• HVAC inspection
MODEL CHART
Model Description
MW-1 Hand-held, mini-vane thermo-anemometer
336 DWYER INSTRUMENTS, INC. | www.dwyer-inst.com
MODE
SET
SPECIFICATIONS
Air Velocity Range: 0 to 30 m/s, 0 to 5860 ft/min, 0 to 90 km/h, 0 to 65 mph, 0 to
55 knots.
Temperature/Wind-Chill Ranges: 14 to 113°F (-10 to 45°C).
Temperature Resolution: 0.36°F (0.2°C).
Accuracy: Wind speed: ±5% of reading. Temperature: ±3.6°F (±2°C).
Resolution: 0.1 m/s, 19 ft/min, 0.3 km/h, 0.2 mph, 0.2 knots.
Sample Time: 1 reading per second.
Water-Resistant: Up to 3´ (1 meter).
Power Requirements: 3 V CR2032 or BR1225 lithium metal battery, installed
functional, user replaceable.
Auto-Off: 14 minutes after last key is pressed.
Impeller: Plastic, replaceable.
Case: Plastic.
Display: 2.32 x 2˝ (59 x 51 mm).
Weight: 1.84 oz (52.1 g).
Agency Approvals: CE.
ACCESSORY
Model Description
A-166
Replacement vane for MW-1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising