Brey Krause 9073 Side Mount Instructions

Brey Krause 9073 Side Mount Instructions
R-9071
R–9072
R-9073
R–9074
R-9075
R–9076
Driver’s side mounting kit - FOR SPARCO EVO/PRO 2000 SEATS
Passenger’s side mounting kit - FOR SPARCO EVO/PRO 2000 SEATS
Driver’s side mounting kit - FOR SPARCO EVO 2 SEATS
Passenger’s side mounting kit - FOR SPARCO EVO 2 SEATS
Driver’s side mounting kit - FOR RECARO POLE POSITION SEATS
Passenger’s side mounting kit - FOR RECARO POLE POSITION SEATS
INSTALLATION INSTRUCTIONS:
SIDE MOUNT BRACKETS FOR SPARCO/RECARO SEATS
TO FACTORY 996/BOXSTER SLIDERS
Brey-Krause R-9071 & R-9072 side mount brackets adapt Sparco Evo/Pro 2000 seats to 996/Boxster
sliders. Brey-Krause R-9073 & R-9074 side mount brackets adapt Sparco Evo 2 seats to 996/Boxster
sliders. R-9075 & R-9076 side mount brackets adapt Recaro Pole position seats to 996/Boxster sliders. We
provide an inside (tunnel side) seat belt mounting point designed for an off road seat belt only. Not for street
use.
Step1
Raise seat bottom to its highest position.
Step 2
Remove (4) mounting bolts that attach the seat to the vehicle. Installation tip: You can use a 10 mm. Six
point socket to remove the bolts that fasten the seat to the floor. Tip the seat back and carefully unplug all
wiring to the seat before attempting to remove the seat from the vehicle.
Step 3
Carefully remove the seat from the vehicle.
Step 4
Remove sliders from the seat by removing (2) fasteners at the front of each slider and (2) fasteners at the
rear of each slider. (The rear fasteners require a torx T-40 allen key for removal.) Note the position of the
fore/aft adjusting rail relative to the sliders for reassembly. (see figure 1 and2)
Figure 1
Figure 2
Step 5
Attach the Brey-Krause side mounts to the sliders as shown using factory hardware. (Removable Loctite is
recommended). If also installing Brey-Krause R-9030 anti-submarine strap, begin installation now.
(see figure 3 and 4)
Figure 3
Figure 4
Step 6
Check all fasteners, attach seat to slider/side mount assembly before installing into the vehicle.
Performance driving events are by nature potentially hazardous to your health. Brey~Krause Mfg. Co. Inc.
shall not be liable for injury, consequential, or other types of damages resulting from the use or misuse of
our products. Proper installation of these parts is critical and should only be done by a professional shop.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising