SX-200 IP Communications Platform
392_914-SX-200_ICP.qxd:Layout 1
1/18/08
3:21 PM
Page 1
DATA SHEET
MITEL
SX-200 IP Communications Platform
Advanced, Affordable Communications System for Small Business
Controllers
Maximum desktop stations
SX-200 ICP CX / CXi Controller
150
SX-200 ICP MX Controller
672
Maximum IP phones
100
248
Maximum TDM devices
104
Maximum embedded digital
trunk modules
1
192 (6 ASU IIs) or 672 (via peripheral
cabinets)
4
Maximum T1 modules
1 x single T1 module
2 x dual link T1 module
Maximum ACD agents
50 IP
100 IP + TDM
Maximum consoles
N/A
11 SuperConsole 1000
Maximum Dual or Quad DSP modules
1 DSP module
2 DSP modules
Maximum echo cancellation channels
12 default / 42 maximum
with optional DSP module
16
64 maximum
Maximum G.729a compression channels
(Every 8 channels requires a DSP)
24
Maximum Network Service Units (NSUs)
N/A
4
Maximum Quad Copper Interface
Modules (CIMs)
1
2
Maximum Analog Service Unit IIs (ASUIIs)
3
6
Maximum number of Peripheral
(Digital) Bays
N/A
7
392_914-SX-200_ICP.qxd:Layout 1
1/18/08
3:21 PM
Page 2
DATA SHEET
Controllers (cont’d)
SX-200 ICP CX / CXi Controller
N/A
SX-200 ICP MX Controlle
2
Maximum voice mail ports
16 IP channels
Max 100 systems / network
16
30 IP channels
Max 100 systems / network
24
Maximum embedded voice mail boxes
748
748
Shipped with (standard):
1 RS-232 port
2 empty MMC slots
6 LS / CLASS circuits
4 ONS / CLASS circuits
1 Music On Hold port
1 paging port
2 Power Fail Transfer circuits
4 ports Voice Mail
1 dual DSP embedded
64 E2T channels
DHCP Server
2 USB ports
2 door relays
10/100/1000 Base – TX LAN port
10 / 100 Base – TX WAN port (CXi only)
16 Port L2 PoE 10/100 Switch (CXi only)
2 RS-232 ports
3 empty MMC slots
6 LS / CLASS circuits
2 ONS / CLASS circuits
1 Music On Hold port
1 paging port
2 Power Fail Transfer circuits
4 ports Voice Mail
1 Dual DSP module
64 E2T channels
DHCP Server
2 DNIC circuits
2 CIM ports
10 / 100 Base – TX LAN port
Maximum number of Dual Fiber Interface
Modules (FIMs)
IP networking
Hardware Option Modules
SX-200 ICP CX / CXi Controller
4 ONS
6 LS / CLASS
1 paging port
2 relays
2 power fail transfer circuits
SX-200 ICP MX Controller
2 ONS / CLASS
6 LS / CLASS
DSP modules
Dual or quad expand voice mail,
conferences, compression
Dual or quad module expands voice
mail, conferences, compression, echo
cancellation channels
Digital trunking
T1 single link combo module
Dual T1 module – 2 links / module
Analog Option Module
Provides additional
Dual FIM modules support PRI card
or SX-200 peripheral (digital) cabinets
SX-200 NSU provides dual link
PRI connections
2 MITEL DATA SHEET SX-200 IP COMMUNICATIONS PLATFORM
392_914-SX-200_ICP.qxd:Layout 1
1/18/08
3:21 PM
Page 3
Support for Mitel IP Phones:
Mitel 5201 IP Phone
Mitel 5212 IP Phone
Mitel 5224 IP Phone
Mitel 5330 IP Phone
Mitel 5340 IP Phone (Backlit)
Mitel Superset 4015
Mitel Superset 4025
Mitel SuperConsole 1000
Support for IP Peripherals:
Mitel 5310 IP Conference Unit
Mitel IP Programmable Key Module (PKM) – 12 buttons
Mitel IP Programmable Key Module (PKM) – 48 buttons
Mitel Wireless LAN Stand
Mitel Gigabit Ethernet Stand
SX-200 ICP CXi Controller Data Connectivity
Integral 16-port Power over Ethernet Layer 2 10 / 100
Ethernet switch 10 / 100 / 1000 Ethernet uplink port for
connection to additional switch ports and / or router
WAN Port for “Internet Gateway” support
• WAN port provides connection to an ISP for Internet
access (e.g., DSL or cable) and supports NAT and
Firewall capabilities (external router required for
IP Networking)
Embedded Applications
Embedded Voice Mail with Auto Attendant
• MX: 4 Auto Attendant or VM simultaneous sessions
standard, expandable to 24 sessions
• CX / CXi : 4 Auto Attendant or VM simultaneous
sessions standard, expandable to 16 sessions
(requires additional DSP)
• 20 expandable up to 750 mailboxes
• 450 storage hours (with hard drive)
• Up to 100 messages per mailbox
• Two concurrent system languages
• Multi level Auto Attendant options – eight single digit
(unlimited multi-digit), maximum of 10 levels
• Hospitality
Embedded ACD
• Up to 999 Agent IDs
• Up to 100 IP + TDM (MX) and 50 IP (CX / CXi)
logged-in agents at once
• Up to 99 paths
• Up to 50 agent groups
• Up to 99 agents per agent group
IP Networking
• Supports G.711 and G.729 compression
• Connect up to 100 other network nodes
• Total of 30 (MX) or 16 (CX / CXi) IP network
connections to / from any one node
• One IP network license required per controller
SX-200 IP COMMUNICATIONS PLATFORM MITEL DATA SHEET 3
392_914-SX-200_ICP.qxd:Layout 1
1/18/08
3:21 PM
Page 4
DATA SHEET
Embedded Wireless Phones
• SpectraLink 802.11b wireless phones supported via
SpectraLink SVP compliant 802.11b access points
Partial List of Supported Features
Account Codes
ANI / DNIS
Auto Attendant
Automatic Route Selection (ARS)
Automatic Call Distribution (ACD)
Broker’s Call (Station Swap or Transfer with Privacy)
Busy Lamp Field (BLF)
Call Forwarding
Call Logging
Call Monitor
Call Park and Page
Callback – Busy or No Answer
Campon
Centralized Attendant
CENTREX
CLASS (analog / digital)
Class of Restriction (COR)
Class of Service (COS)
Conference
Direct Inward Dial (DID)
Direct Inward System Access (DISA)
Direct Station Page/Busy Lamp Field (DSS / BLF)
Emergency Calls (911) Reporting to PSAP
FAX Tone Detection
Feature Keys
Flash Control
Group Listen
Hold
4 MITEL DATA SHEET SX-200 IP COMMUNICATIONS PLATFORM
Hold and Page
I Hold / You Hold
Languages
Line Appearances
Prime Line
Key Line
Multicall Line
Direct Trunk Select
Messaging – Advisory
Music on Hold (MOH)
Night Service
Off-Hook Voice Announce
Off Premises Extension (OPS)
Paging
Personal Speed Call
Pickup Groups
Phone Twinning
Q.SIG
Recorded Announcement Device (RAD) Support
Record-a-Call
Redial
Secretarial Line
SMTP Client
Speed Call Key
Station Message Detail Recording (SMDR)
Sub-attendant
Tenanting
Transfer
Trunk Answer From Any Station (TAFAS)
Uniform Call Distribution
Voice Mail Support
Whisper Announce
392_914-SX-200_ICP.qxd:Layout 1
1/18/08
3:21 PM
Page 5
Digital Trunk Connectivity
TDM Connectivity
Universal NSU (MX Controller only)
• Connects to controller via a FIM or CIM port
• Each NSU supports up to two digital links
• Both links in an NSU must run the same protocol
Provides T1 CCS PRI (NI2 Standard, NI2 5ESS, NI2 GTD5)
and QSIG (QSIG ISO), DMS 100/250, 4ESS
Peripheral Cabinet (MX Controller only)
Supports:
• ONS / CLASS Line Card (12 DTMF, Rotary line
circuits/card)
• Digital Line Card (12 Digital Network Interface
Circuits (DNIC) / card)
• LS / GS Trunk Card (6 loop start or ground
start trunks (jumper-selectable) and 6 message
registration inputs)
• LS / CLASS Trunk Card (8 trunk circuits to the system)
• Direct Inward Dial (DID) Trunk Card (6 one-way Direct
Inward Dial circuits)
• Off-Premise (OPS) Line Card (6 circuits / card)
• E&M Trunk Module (4 circuits / card)
Dual Embedded Digital Trunk Module
(MX Controller only)
• Each module has two T1 trunk interfaces (links)
• Provides PRI and / or T1 / D4 protocol through the
controller (no NSU required)*
Single Embedded Digital Trunk Module (CX / CXi
Controllers)
• Provides PRI or T1 / D4 protocol through the
controller (no NSU required)*
*Does not support: Min/Max, NFAS, D-Channel Backup or TDM XNET
(Hybrid XNET is supported)
Analog Connectivity
Analog Service Unit II (ASU II ) (CX / CXi / MX
Controllers)
• Chassis with 2 line card slots
• Two line card variants:
16 ONS Line Card
4 LS + 12 ONS Combo Line Card
• Connects to the controller via CIM
Supports combinations of:
32 analog CLASS stations (16 per ONS LineCard)
8 LS trunks (4 per Combo Line Card)
8 System Fail Transfers (4 per Combo Line Card)
SX-200 IP COMMUNICATIONS PLATFORM MITEL DATA SHEET 5
392_914-SX-200_ICP.qxd:Layout 1
1/18/08
3:21 PM
Page 6
DATA SHEET
Dimensions
SX-200 ICP Controller
Analog Services Unit II
(ASU II)
Network Services Unit Peripheral Cabinet
(NSU)
CX / CXi - 3.5 in (8.9 cm) (2U)
MX – 2.7 in. (7 cm) (1.5 U)
Width
CX / CXi – 17.75 in (45.1 cm)
MX – 17.3 in (44 cm) (19” rack mountable)
3.3 in. (8.4 cm) (2U)
1.75 in (4.454 cm) (1U)
11” (28 cm)
17.4 in (44.2 cm)
(19” rack mountable)
17.75 in (45.1 cm)
(19” rack mountable)
17” (43 cm)
(19” rack mountable)
Depth
13.3 in. (33.8 cm)
15.5 in (39.4 cm)
17” (43 cm)
14.1 lb. (6.4 kg)
8.41 lb (4.27 kg)
47 lb (21 kg)
Cards installed
Height
Weight
MX – 14 lb (6.39 kg)
CX / CXi – 16.5 in (41.9 cm)
MX – 19.6 in. (50 cm)
CX / CXi – 19.8 lb (8.98 kg)
Operational Environment
SX-200 ICP Controller
Analog Services Unit II
Network Services Use
(ASU II)
Peripheral Cabinet
(NSU)
Temperature
41° to 122°F
(5° to 50°C)
40° to 120°F
(4° to 49°C)
40° to 120°F
(4° to 49°C)
32° to 122°F
(0° to 50°C)
Humidity
40% – 90%
relative humidity,
non condensing
34% – 95%
relative humidity,
non condensing
34% – 95%
relative humidity,
non condensing
5% – 95%
relative humidity,
non condensing
Max Heat
(Fully Loaded)
750 BTUs per hour
260 BTUs per hour
170 BTUs per hour
724 BTUs per Dissipation
hour
Air Flow
max output of fans
46 cubic ft / min at
150 cubic ft / min at
max output of fans
Acoustic
Emissions
Max 50dBA continuous,
75 dB intermittent
(<10% duty cycle)
Max 50dBA
continuous, 75 dB
intermittent
(<10% duty cycle)
Conversion factors: one watt is equal to 3.412 BTUs per hour. One ton of refrigeration is equal to 12,000 BTUs per hour or 3.516 Kilowatts, and
0.75 kilowatt-hour is equal to one ton of refrigeration.
System Input Power Requirements
SX-200 ICP Controller
Analog Services Unit II
(ASU II)
Network Services Unit
(NSU )
Peripheral Cabinet
Input /
Disconnect
IEC320 – C14
Class 1 AC Receptacle
IEC320-C14
Class 1 AC Receptacle
IEC320 – C14
Class 1 AC Receptacle
IEC320 – C14
Class 1 AC Receptacle
Input Voltage
/ Frequency
Rating
100 – 120 VAC
50/60Hz
100–240 VAC
50/60Hz
100 – 240 VAC
50/60Hz
For North America:
100 – 120 / 200 – 240
VAC auto selectable
For Europe:
200 – 240VAC
Maximum
Input Power
CX / CXi – 300W
MX – 100W
125W
20W –-Universal
30W –- R2
40W –- BRI
300 W
AC Source
Range
90 – 264 VAC
47 – 63 Hz
90 – 264 VAC
47 – 63 Hz
90 – 264 VAC
47 – 63 Hz
47 – 63 Hz
6 MITEL DATA SHEET SX-200 IP COMMUNICATIONS PLATFORM
392_914-SX-200_ICP.qxd:Layout 1
1/18/08
3:21 PM
Page 7
Glossary
ACD
Automatic Call Distribution
ASU
Analog Services Unit
CIM
Copper Interface Module
CLASS
Custom Local Access Signaling Services
DID
Direct Inward Dial
DNI
Digital Network Interface
DSP
Digital Signal Processor
FIM
Fiber Interface Module
IP
Internet Protocol
ISDN
Integrated Services Digital Network
LS
Loop Start Trunk
MMC
Mitel Mezzanine Card
MOH
Music on Hold
NFAS
Non-Facilities Associated Signaling
NSU
Network Services Unit
OPS
Off Premises, long loop analog PBX ports
PRI
Primary Rate Interface, ISDN
VM
Voice Mail
SX-200 IP COMMUNICATIONS PLATFORM MITEL DATA SHEET 7
392_914-SX-200_ICP.qxd:Layout 1
1/18/08
www.mitel.com
3:21 PM
Page ii
Global Headquarters
U.S.
EMEA
CALA
Asia Pacific
Tel: +1(613) 592-2122
Fax: +1(613) 592-4784
Tel: +1(480) 961-9000
Fax: +1(480) 961-1370
Tel: +44(0)1291-430000
Fax: +44(0)1291-430400
Tel: +1(613) 592-2122
Fax: +1(613) 592-7825
Tel: +852 2508 9780
Fax: +852 2508 9232
For more information on our worldwide office locations, visit our website at www.mitel.com/offices
THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Mitel to be accurate as of the date
of its publication, is subject to change without notice. Mitel assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a
result of having made this document available to you or based upon the information it contains.
M MITEL (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the registered trademarks of their respective holders.
© Copyright 2008, Mitel Networks Corporation. All Rights Reserved.
GD 392_914 PN 51011181RC-EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising