STI-7504 Installation Sheet
®
Safety Technology International, Inc.
Safety Technology International (Europe) Ltd.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: info@sti-usa.com
Web: www.sti-usa.com
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: info@sti-europe.com • Web: www.sti-europe.com
EXISTING KEYPAD UNIT
750098 GASKET
CENTER GASKET AROUND EXISTING KEYPAD
MARK AND DRILL (6) 3/16 in.(4.7mm) DIAMETER
HOLES 7/8 in.(22mm) DEEP
6.75 in.
(171mm)
8.75 in.
(222mm)
4.75 in.
(120mm)
REMOVE BACKING
PAPER AND APPLY
TOWARD MOUNTING
SURFACE.
5.5 in.
(139mm)
FRONT VIEW
19018 ANCHOR
(6) PROVIDED
4 in.
(101mm)
AFTER INSTALLATION IS
COMPLETE THIS AREA
OF GASKET MAY BE
CUT AND REMOVED
TOP VIEW
STI-7504 ENCLOSURE (CLEAR)
STI-7505 ENCLOSURE (SMOKE)
19014 SCREW #8 x 1 in.
(6) PROVIDED
INSTALLATION INSTRUCTIONS
1. Place the cover over the appliance. Be sure that
it is accessible through the front opening in
cover.
2. Mark and drill 7 holes 3/16 in. (4.7mm).
3. Complete assembly as shown.
CLEANING INSTRUCTIONS
1. Rinse cover with water to remove abrasive dust and
dirt.
2. Wash with soap or mild detergent using a soft cloth.
(DO NOT SCRUB.)
3. Rinse once more, then dry with a soft cloth or
chamois.
4. To remove grease or wet paint, rub gently with a
cloth wetted thoroughly with naphtha, then wash
and rinse. (DO NOT USE RAZOR BLADES.)
INSTALLATION OF SNOOPER STOPPERS® STI-7504 AND STI-7505
All specifications and information shown were current as of publication, and are subject to change without notice.
STI-750405IS AUG2006
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising