SL5.1425

SL5.1425
REGULATED AND HEAVY DUTY UNREGULATED
DC POWER SUPPLIES
PS Series,
PS-RK, RPS24-05,
TPS24-05, TS242
FEATURES
• Choice of 10 Models in 12 and 24 Volt Regulated and Heavy-Duty Unregulated Versions
• Engineered Specifically to Meet the Application Requirements of the Commercial Sound
Communications Industries, and Home Electronics
• Compact Size is Ideal for Shelf, Wall, or Rack Mounting
• Optional Rack Mount Accessory Shelf (Model PS-RK) Allows Convenient Installation in 19" W
Equipment Cabinets
APPLICATIONS
PS12-10
PS-M12
Utilize Atlas Sound power supplies for a wide variety of commercial sound and communications
applications in industrial, institutional, service, and educational facilities. Compact series
includes 12 and 24 VDC models for use where small, economical power supplies are required.
To meet the specific application needs of the sound contractor, both regulated and unregulated
versions are available:
PS24-075 RPS24-05 TPS24-05
Regulated Models. Four assemblies of 1⁄2 to 4 amp service are provided for applications that
require excellent regulation and extremely low ripple including transistorized and solid state
control equipment and alarm/warning systems.
FIVE
Unregulated Models. Six heavy-duty units of 3⁄4 to 10 amp service are offered for applications
that require a high current DC supply including many types of telephone, annunciator and
industrial paging systems, and installations with large numbers of relays.
GENERAL DESCRIPTION
PS / RPS / TPS Series. This extensive selection of power supplies has been developed to perform under the application requirements and operational parameters of commonly used ranges
in communications equipment. To guard against excessive line currents, all models are fused
or circuit-breaker protected in the primary. Most units also contain fast-acting fuses located at
the output to protect circuitry from accidental overload. Barrier strip output terminals allow for
wire-insertion ease and protect against shorted connections.
PS24-20
Compact size and light weight lend themselves to convenient installation almost anywhere.
Wall mounting is easily achieved via mounting ears on the 63⁄4’ L models or with keyhole slots in
the chassis of the larger 131⁄4" L units. In addition, four rubber feet are provided on the 131⁄4" L
models for secure shelf mounting. For attractive installation in 19" W equipment cabinets, an
optional factory-assembled, black textured rack mount accessory shelf (Model PS-RK) is
offered to support four 63⁄4" L units or one 131⁄4" L unit. Rack shelf comes complete with front
viewing hole for the power indicator light of the 131⁄4" L models and knock-outs to accommodate
line cords.
(Front View)
Model PS-12-10. Compact 12 VDC (1 Amp) power supply designed for use with up to 12
switched WhisperTouch® volume controls.
(Back View)
PS24-2R (Shown)
PS24-50A PS24-4R
Model PS-M12. Compact 12 VDC (200mA) power supply has a 1⁄8" mini plug for direct connection to the M-1CB4A connector block (powers up to four F-1 infrared flashers) or for use with up
to three switched WhisperTouch volume controls.
Model TS-242. UL Listed unit is used for a variety of applications that do not require a regulated supply. Model includes a 117 VAC unswitched outlet, neon pilot lamp, barrier-type terminals,
and perforated grille for ventilation. Finished in black epoxy. Unit can be rack mounted using
shelf Model PS-RK.
All models are finished in black epoxy; larger units also include a cover finished in textured black
epoxy. Assemblies include a 6' heavy-duty AC power cord and are completely enclosed with the
exception of the larger 131⁄4" L units which have a perforated grille for proper ventilation.
TS242
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
291
© 2001 Atlas Sound LP
Printed in U.S.A.
000501
SL5-1425
PS12-10
PS-M12
PS24-075
RPS24-05 TPS24-05
PS24-20
PS24-50A
PS24-2R
PS24-4R
PS24-1R
TS242
HEAVY DUTY UNREGULATED POWER SUPPLIES
OUTPUT
INPUT
(NOMINAL)
120 VAC
12 VDC
60 Hz, 5 W
200mA Amp
PS12-10 105 - 130 VAC
12 VDC
60 Hz, 20 W
1 Amp
PS24-075
117 VAC
24 VDC
60 Hz, 26 W
3/4 Amp
PS24-20
117 VAC
24, 12, 6 VDC
60 Hz, 70 W
2 Amps
PS24-50A
117 VAC
24 VDC
60 Hz, 170 W
5 Amps
TS242
105-125 VAC
24 VDC
60 Hz, 74 W
2 Amp
MODEL
PS-M12
RIPPLE @
FULL LOAD
Less Than
2.5%
Less Than
7.5%
Less Than
1.5%
Less Than
2.5%
Less Than
2.5%
Less Than
0.5%
REGULATION
0 - FULL LOAD
16.5-11.5V
PILOT
LAMP
-
FUSE
-
16.5-11.5V
-
-
26-22 V
-
Primary
27-22 V
-
Primary
29-23 V
X
28 - 22.4 V
X
Primary
Secondary
Primary
Secondary
SIZE
L xW x H
11⁄2" x 11⁄2" x 21⁄8"
(38 x 38 x 56mm)
3" x 25⁄8" x 21⁄4"
(76 x 66 x 58mm)
63⁄4"’ x 35⁄8" x 2"
(171 x 92 x 51mm)
63⁄4" x 35⁄8"’ x 4"’
(171 x 92 x 102mm)
131⁄4" x 61⁄4" x 43⁄4"
(337 x 159 x 121mm)
37⁄8" x 107⁄8" x 6"
(99 x 276 x 152mm)
WEIGHT
.8 lb (.4 kg)
1.3 lb (.6 kg)
3.5 lb (1.6 kg)
4.5 lb (2.0 kg)
15 lb (6.8 kg)
10 lb (4.5 kg)
REGULATED POWER SUPPLIES
MODEL
RPS24-05
PS24-2R
PS24-4R
*TPS24-05
INPUT
117 VAC
60 Hz, 26 W
105-125 VAC
60 Hz, 110 W
105-125 VAC
60 Hz, 210 W
117 VAC
60 Hz, 26 W
OUTPUT
(NOMINAL)
24 VDC
1/2 Amp
24 VDC
2 Amps
24 VDC
4 Amps
24 VDC
1/2 Amp
Talk Line
RIPPLE @
FULL LOAD
.5 mV
REGULATION
0 - FULL LOAD
500 mV
PILOT
LAMP
-
.5mV
500 mV
X
1mV
300 mV
X
.5 mV
500 mV
FUSE
Primary
Secondary
Primary
Secondary
Primary
Secondary
Primary
-
SIZE
L xW x H
63⁄4" x 35⁄8" x 2"
(171 x 92 x 51mm)
131⁄4" x 61⁄4" x 43⁄4"
(337 x 159 x 121mm)
131⁄4" x 61⁄4" x 43⁄4"
(337 x 159 x 121mm)
63⁄4" x 35⁄8" x 2"
(171 x 92 x 51mm)
WEIGHT
3 lb (1.4 kg)
15.5 lb (7.0 kg)
16.5 lb (7.5 kg)
3 lb (1.4 kg)
* For use with telephone intercom stations. See SL8-1434.
RACK MOUNT ACCESSORY SHELF (MODEL PS-RK)
Size (L x W x H): 19" x 8" x 51⁄4" (483 x 203 x 133mm)
• Plug provided for viewing hole
when not mounting 131⁄4" L chassis
• Holds up to (4) 63⁄4" L chassis or
(1) 131⁄4" L chassis
ARCHITECT AND ENGINEER SPECIFICATIONS
Power supply shall be Atlas Sound Model ______ . It shall be capable of supplying ____ amps at ____ volts. Ripple shall be ____ at full load.
Primary circuit shall be protected by (fuse, circuit breaker). Mounting provisions shall be integral to the chassis design. Size shall be ____.
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
© 2000 Atlas Sound LP
Printed in U.S.A.
00501
SL5-1425
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising