TC-512 Thermal Cycler Industry Leading Warranty... 4 years or 80,000 cycles TC512 Thermal Cycler The TC-512 has a graphical Touch Screen display which enables you to optimize your experiments at the “touch of a screen.” Wide linear gradient: The only Gradient Thermal Cycler on the market to offer quad circuit technology which results in the most linear gradient on the market, with an amazing range of 30°C. Protocols can be optimized in a single experiment. Touch Screen: The TC-512 incorporates a large, 115 x 90mm, touch-sensitive screen that provides a unique user-friendly programming interface which is second to none. Graphical display: The unique ‘real-time’ graphical display shows the sample temperature profile while the program is running, including the upper and lower limits of the gradient. This pictorial, real-time representation means instant visualization of your experiment’s status. Memory cards: Smart Media memory cards provide an alternative to internal memory storage of your programs, offering security and flexibility. Gradient calculator: The gradient calculator function displays the temperature of each column. This ensures replication of the experimental conditions. High performance: Each block consists of 8 peltier units, controlled by 4 independent temperature thermistors (control sensors) distributed evenly across the block. This ensures that the TC-512 exhibits the most accurately controlled linear gradient available*. 4-Fold control: A maximum heating rate of 3°C/Sec and block uniformity of <±0.4°C. With or without a gradient......no compromise! Versatile block format: The truly user-friendly interchangeable block system allows blocks to be interchanged in a matter of seconds without the need of any tools (60 x 0.5ml 96 x 0.2 ml, 3841 well, Insitu Block2). Intuitive programming: Easy to use software with free upgrades downloadable from the Techne® website as new functionality is added. 1 Maximum 16°C gradient with 384 well block 2 in-situ block available as non-gradient only ** Available by special order only Technical Specification Blocks Formats 0.5ml capacity 0.2ml capacity 384-well block Gradient block In-situ block User interchangeable 60 96 Yes 0.5mL, 0.2 mL, 384 Yes Yes Block Temperature Gradient range Maximum gradient Maximum ramp rate* Block uniformity at 50°C* Column uniformity with a 10°C Temperature range Temperature set point precision 20°C to 70°C 30°C (16°C for 384 block) 3.0°C/sec <±0.3°C gradient <±0.3°C 4°C to 99°C 0.1°C Heated Lid Selectable heated lid temperature 100°C - 115°C Heated lid enable/disable Yes Over temperature cut out Yes Regulated lid pressure Yes Heated lid only comes on if block is set above 35°C Programming Memory cards Number of programs # Password protection Programming Graphical display Incremental/decremental temperature Incremental/decremental hold time Maximum hold time Minimum hold time Variable programmable ramp rate Run end time calculation Pause and stop facility End of program alarm (enable/disable) Auto restart on power failure Yes 50 or 500 (with card) Yes Touchscreen Real-time graph Yes Yes 99 hrs 1 sec 0.1°C/sec steps Yes Yes Yes Yes Miscellaneous Serial port Dual Voltage (120/230V) Temperature sensor Peltierelements/block Dimensions L x W x H (mm) Footprint L x W (mm) Connection to PC control program Free software upgrades from website Power consumption Frequency Net weight RS232 Yes Thermistor 8 420 x 220 x 260 420 x 220 (16.5” x 8.7” x 10”) Yes Yes 620 Watts 50 - 60 Hz 11kg (total) * Given are typical values of a standard 0.2ml block, in an ambient temperature of 20°C. # Actual numbers are dependent on complexity of the programs. Ordering information Code Description FTC51H2D FTC51S5D FTC5384D** FTC51FLD** TC-512 TC-512 TC-512 TC-512 Accessories FTC51BHD Techne Inc. 3 Terri Lane, Suite 10 Burlington, New Jersey 08016 Toll free: 800-225-9243 Web: www.techneusa.com 96 x 0.2ml microtubes or 96-well plate, 120/240 60 x 0.5ml, 120/240 384 well microtitre plate, 120/240 Flat plate for in-situ, 120/240 Block for 96 x 0.2 mL microtubes or 96-well plate (Half or non skirt) FTC51B5D Block, 60 x 0.5 mL microtubes FTC51BID** Flat plate for insitu (non-gradient) FTC5B384** Block for 384-well microtitre plate FTGSM2 Memory Card Thank you for reading this data sheet. For pricing or for further information, please contact us at our UK Office, using the details below. UK Office Keison Products, P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England. Tel: +44 (0)1245 600560 Fax: +44 (0)1245 808399 Email: [email protected] Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project