TC-512 Thermal Cycler Industry Leading Warranty... 4 years or 80,000 cycles

TC-512 Thermal Cycler Industry Leading Warranty... 4 years or 80,000 cycles
TC-512 Thermal Cycler
Industry Leading Warranty...
4 years or 80,000 cycles
TC512 Thermal Cycler
The TC-512 has a graphical Touch
Screen display which enables you to
optimize your experiments at the
“touch of a screen.”
Wide linear gradient:
The only Gradient Thermal Cycler
on the market to offer quad circuit technology which results in the
most linear gradient on the market, with an amazing range of 30°C.
Protocols can be optimized in a single experiment.
Touch Screen:
The TC-512 incorporates a large, 115 x 90mm, touch-sensitive screen
that provides a unique user-friendly programming interface which is
second to none.
Graphical display:
The unique ‘real-time’ graphical display shows the sample temperature
profile while the program is running, including the upper and lower
limits of the gradient. This pictorial, real-time representation means
instant visualization of your experiment’s status.
Memory cards:
Smart Media memory cards provide an alternative to internal memory
storage of your programs, offering security and flexibility.
Gradient calculator:
The gradient calculator function displays the temperature of each
column. This ensures replication of the experimental conditions.
High performance:
Each block consists of 8 peltier units, controlled by 4 independent
temperature thermistors (control sensors) distributed evenly across the
block. This ensures that the TC-512 exhibits the most accurately
controlled linear gradient available*.
4-Fold control:
A maximum heating rate of 3°C/Sec and block uniformity of <±0.4°C.
With or without a gradient......no compromise!
Versatile block format:
The truly user-friendly interchangeable block system allows blocks to
be interchanged in a matter of seconds without the need of any tools
(60 x 0.5ml 96 x 0.2 ml, 3841 well, Insitu Block2).
Intuitive programming:
Easy to use software with free upgrades downloadable from the
Techne® website as new functionality is added.
1 Maximum 16°C gradient with 384 well block
2 in-situ block available as non-gradient only
** Available by special order only
Technical Specification
Blocks Formats
0.5ml capacity
0.2ml capacity
384-well block
Gradient block
In-situ block
User interchangeable
60
96
Yes
0.5mL, 0.2 mL, 384
Yes
Yes
Block Temperature
Gradient range
Maximum gradient
Maximum ramp rate*
Block uniformity at 50°C*
Column uniformity with a 10°C
Temperature range
Temperature set point precision
20°C to 70°C
30°C (16°C for 384 block)
3.0°C/sec
<±0.3°C
gradient <±0.3°C
4°C to 99°C
0.1°C
Heated Lid
Selectable heated lid temperature
100°C - 115°C
Heated lid enable/disable
Yes
Over temperature cut out
Yes
Regulated lid pressure
Yes
Heated lid only comes on if block is set above 35°C
Programming
Memory cards
Number of programs #
Password protection
Programming
Graphical display
Incremental/decremental temperature
Incremental/decremental hold time
Maximum hold time
Minimum hold time
Variable programmable ramp rate
Run end time calculation
Pause and stop facility
End of program alarm (enable/disable)
Auto restart on power failure
Yes
50 or 500 (with card)
Yes
Touchscreen
Real-time graph
Yes
Yes
99 hrs
1 sec
0.1°C/sec steps
Yes
Yes
Yes
Yes
Miscellaneous
Serial port
Dual Voltage (120/230V)
Temperature sensor
Peltierelements/block
Dimensions L x W x H (mm)
Footprint L x W (mm)
Connection to PC control program
Free software upgrades from website
Power consumption
Frequency
Net weight
RS232
Yes
Thermistor
8
420 x 220 x 260
420 x 220 (16.5” x 8.7” x 10”)
Yes
Yes
620 Watts
50 - 60 Hz
11kg (total)
* Given are typical values of a standard 0.2ml block, in an ambient temperature of 20°C.
# Actual numbers are dependent on complexity of the programs.
Ordering information
Code
Description
FTC51H2D
FTC51S5D
FTC5384D**
FTC51FLD**
TC-512
TC-512
TC-512
TC-512
Accessories
FTC51BHD
Techne Inc.
3 Terri Lane, Suite 10
Burlington, New Jersey 08016
Toll free: 800-225-9243
Web: www.techneusa.com
96 x 0.2ml microtubes or 96-well plate, 120/240
60 x 0.5ml, 120/240
384 well microtitre plate, 120/240
Flat plate for in-situ, 120/240
Block for 96 x 0.2 mL microtubes or 96-well plate
(Half or non skirt)
FTC51B5D
Block, 60 x 0.5 mL microtubes
FTC51BID** Flat plate for insitu (non-gradient)
FTC5B384** Block for 384-well microtitre plate
FTGSM2
Memory Card
Thank you for reading this data sheet.
For pricing or for further information, please contact us at our UK Office, using the details
below.
UK Office
Keison Products,
P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England.
Tel: +44 (0)1245 600560
Fax: +44 (0)1245 808399
Email: [email protected]
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the
suitability of this product.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement