455-590-spec
A-1
A-1
INSTALLATION
TECHNICAL SPECIFICATIONS - Commander 300 (K1585-1 & -2)
INPUT - DIESEL ENGINE
Make/Model
Description
Speed (RPM)
Displacement
Starting
System
Capacities
Deutz
F3L 1011F
Diesel Engine
3 cylinder
31 HP(23 kw)
@ 1800 RPM
High Idle 1900
Low Idle 1400
Full Load 1800
125 cu. in
(2.05 L)
12VDC battery
& Starter
Fuel: 25 gal.
94.6 L
Bore x Stroke
Oil: 6.3 Qts.
6.0 L
3.89” x 4.13”
(99mm x 105mm)
RATED OUTPUT - WELDER
Duty Cycle
Welding Output
Volts at Rated Amps
100%
300 amps (DC multi-purpose)
32 volts
60%
375 amps (DC multi-purpose)
34 volts
OUTPUT - WELDER AND GENERATOR
Welding Range
Open Circuit Voltage
Auxiliary Power1
30 - 300 Amps
87 Max OCV
5 Ranges
@1900 RPM
120/240 VAC
10,000 Watts, 60 Hz.
100% Duty Cycle
PHYSICAL DIMENSIONS
HEIGHT2
WIDTH
DEPTH
42.0 in.
31.5 in.
63.1 in.
1066.8 mm
800.1 mm
1602.7 mm
WEIGHT
1325 lbs.(601 kg)
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 8.9” (226.1mm) for exhaust.
COMMANDER 300
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising