QuickSpecs
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Overview
1.
2.
3.
4.
HP ProLiant BL680c Generation 5 (G5) Server Blade
Front view image
Cache battery modules
5. Up to four Intel® Quad-core Xeon® 7300 processors
Two small form factor (SFF) hot-plug drive bays
6. Up to 128 GB PC2-5300, DDR2 FB DIMMs
Power button
7. Three I/O expansion mezzanine slots
Local I/O connector
8. Four embedded Gigabit Ethernet adapter ports
What's New
Support for the 8 GB Low Power Memory option kit
At A Glance
This document covers the HP ProLiant BL680c G5 server blade only. For more information on the HP BladeSystem c-Class
Infrastructure and HP BladeSystem c-Class Interconnects, please see the following QuickSpecs:
HP BladeSystem c-Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.html
HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.html
The HP ProLiant BL680c G5 delivers no-compromise performance and expansion in the densest 4P server blade form-factor
available to handle your most demanding applications. The HP ProLiant BL680c server blade G5 includes:
Processor:
Up to four Quad-Core Intel® Xeon® 7300 Series processors
DA - 12773
North America — Version 12 — February 29, 2008
Page 1
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Overview
Intel 7300 chipset supporting a 1066 MT/s Dedicated High-Speed Interconnect (DHSI)
Demand Based Switching (DBS) with Enhanced Intel SpeedStep® Technology on select models
Up to 8 MB (2x4 MB) L2 cache
Intel® Virtualization Technology
Memory:
Up to 128 GB of memory supported by sixteen (16) PC2-5300, fully-buffered DIMMs at 667 MHz
Advanced ECC memory support
Memory interleaving (2 x 1), memory mirroring, and online spare capacity
Storage Controller:
Integrated HP Smart Array P400i Controller with 256 MB cache, RAID 0/1, and optional battery-backed write cache
upgrades
Internal Drive Support:
Up to two (2) small form factor (SFF) SAS or SATA hot-plug hard drives
Network Controller:
Four (4) embedded network adapter ports, plus one (1) additional management network adapter port:
One (1) embedded NC326i Dual Port Gigabit Server Adapter
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft
Windows
One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management
Mezzanine Support:
Three (3) mezzanine expansion slots for additional I/O mezzanine including:
Dual Port 4Gb Fibre Channel for SAN connectivity (choice of Emulex or QLogic)
Dual port 10 Gb Ethernet for high bandwidth network connectivity
Multiple dual and quad port Gigabit Ethernet network adapter options for increased bandwidth and additional
network ports
Dual port 20Gb 4X DDR InfiniBand for low latency server interconnectivity
Internal USB Support:
One (1) internal USB 2.0 connector for security key devices and USB drive keys
Form Factor:
The HP ProLiant BL680c G5 server blade plugs vertically into the HP BladeSystem c3000 and c7000 enclosures
Management:
Integrated Lights-Out 2 Standard Blade Edition with virtual KVM graphical remote console
Enclosures:
HP offers three different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 8 HP ProLiant BL480c servers plugged
vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 4 HP ProLiant BL480c servers plugged
horizontally.
The HP BladeSystem c3000 tower enclosure is designed with casters for sites without racks and holds up to 4 HP
ProLiant BL480c servers plugged vertically.
Server blades, storage blades, and interconnect modules are all designed to fit into the c7000 and c3000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
Protected by HP Services and a worldwide network of HP Authorized Channel Partners. Three-year parts, 3 Year Labor
and 3 Year on-site limited global warranty. Certain restrictions and exclusions apply. SATA hard drives have a one year
warranty.
DA - 12773
North America — Version 12 — February 29, 2008
Page 2
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Processor
Quad-Core Intel® Xeon® Processor E7340
(2.40 GHz, 2x4 MB L2 Cache, 10666 MT/s DHSI, 80W, DBS)
Quad-Core Intel® Xeon® Processor E7330
(2.40 GHz, 2x3 MB L2 Cache, 1066 MT/s DHSI, 80W, DBS)
Quad-Core Intel® Xeon® Processor E7320
(2.13 GHz, 2x2 MB L2 Cache, 1066 MT/s DHSI, 80W, DBS)
Quad-Core Intel® Xeon ®Processor E7310
(1.60 GHz, 2x2 MB L2 Cache, 1066 MT/s DHSI, 80W)
Quad-Core Intel® Xeon® Processor L7345
(1.86 GHz, 2x4 MB L2 Cache, 1066 MT/s DHSI, 50W Low Voltage)*
Dual-Core Intel® Xeon® Processor E7220
(2.93 GHz, 2x4 MB L2 Cache, 1066 MT/s DHSI, 80W, DBS)*
NOTE: For the Intel 7300 series, the letter preceding the model number indicates the
performance/wattage of the processor. The "E" denotes enterprise performance/wattage (mainstream);
and "L" denotes lower wattage.
* Offered through Configure-To-Order only. See Factory Integrated Models section for more details.
Upgradeability
Upgradeable to four processors
Cache Memory
Up to 8 MB (2x4 MB) level 2 cache memory depending on model
Chipset
Intel® 7300 chipset
Memory
Type
Standard
PC2-5300 Fully Buffered DIMMs operating at 667 MHz
2 GB (2 x 1 GB)
4 GB (4 x 1 GB)
Maximum
128 GB (16 x 8 GB)
NOTE: See the "DIMM installation guidelines" section for memory installation rules.
Network Controller
Four (4) embedded Gigabit Ethernet network adapter ports, plus (1) additional management network
adapter port:
One (1) embedded NC326i Dual Port Gigabit Server Adapter
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for
Microsoft Windows
One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management
DA - 12773
North America — Version 12 — February 29, 2008
Page 3
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Multifunction Networking The embedded multifunction NC373i combines standard Gigabit Ethernet networking, TCP/IP offload
engine (TOE) acceleration, and iSCSI boot capability into a single adapter.
TOE moves the processing of data in the TCP protocol stack from the server CPU to the network
card, freeing CPU cycles for other activities. With TOE, network communications are improved,
and server efficiency is increased. The NC373i offers TOE for Microsoft® Windows environments.
iSCSI boot allows the BL680c G5 to boot from a remote operating system (OS) image located on
a storage area network (SAN). The BL680c G5 uses an iSCSI firmware image (iSCSI boot option
ROM) making the remote disk drive appear as a local, bootable C: drive. The BL680c G5 is
configured to connect to and boot from the iSCSI target disk on the network and download the
OS image from the iSCSI target disk. The iSCSI boot option ROM is supplied by HP at no cost.
The additional cost and mezzanine slot usage of an add-in iSCSI HBA card is not required.
Additionally, the HP iSCSI boot solution includes scripts to significantly simplify the installation
process.
I/O Expansion Slots
Three I/O expansion mezzanine slots (two PCI Express x8 and one x4)
Integrated Manageability Integrated Lights-Out 2 Standard Blade Edition (iLO 2)
Storage Controller
HP Smart Array P400i
Controller
256 MB memory module supports RAID 0/1
Available upgrades Battery-backed write cache, or 512 MB cache with
battery-backed write cache
Maximum Internal
Storage
Hot Plug Serial Attach
SCSI (SAS)
292 GB SAS
Graphics
Integrated ATI RN-50 1280 x 1024 x 16M color (32 MB DDR1 memory)
Graphics Resolution
Resolution Color Depths
Fibre Channel
Two optional 4 Gb Fibre Channel HBA mezzanines are supported ordered separately:
2 x 146 GB Serial SCSI
1280 x 1024, 16.7M , 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem (403621-B21)
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem (403619-B21)
NOTE:
NOTE For additional information on the optional 4 Gb Fibre Channel HBA mezzanines, see:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
DA - 12773
North America — Version 12 — February 29, 2008
Page 4
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Compatible SAN
HP ProLiant BL680c G5 server blades are optimized for HP StorageWorks MSA, EVA, and XP
HP ProLiant BL680c G5 server blades are compatible with select third party SANs (please see blade
storage page for more details: http://h18000.www1.hp.com/products/servers/proliant-bl/cClass/storage.html)
DA - 12773
North America — Version 12 — February 29, 2008
Page 5
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Insight Control
Management Suites
Insight Control Environment for BladeSystem delivers foundation management for HP BladeSystem
lifecycles, including hardware resource deployment, health monitoring, software version control,
performance monitoring, vulnerability, scanning and patch management.
Installs and licenses the following components by default using a wizard-based integrated installer:
HP Systems Insight Manager
HP iLO Select Pack
HP Insight Power Manager
HP ProLiant Essentials Rapid Deployment Pack
HP ProLiant Essentials Performance Management Pack
HP ProLiant Essentials Vulnerability and Patch Management Pack
HP ProLiant Essentials Virtual Machine Management Pack
Additional ProLiant Essentials software and management tools included on the Insight Control
Management kit can be installed manually.
Server Migration Pack - Universal Pack
HP Open Service Event Manager
HP Instant Support Enterprise Edition
NOTE: Server Migration Pack - Universal Edition can be installed from the SMP-P2P CD included in the
Insight Control Management media kit.
NOTE: Insight Control Environment for BladeSystems can be installed from the Insight Control
Management DVD, which can be delivered with HP BladeSystem c-Class enclosures with a choice of
licensing options. Licensing options include a free 30 day evaluation license for 8 servers (default option
for every enclosure order), a full purchased license for 8 blade servers or a full purchased license for 16
blade servers). For additional information on HP c-Class Infrastructure please visit: HP BladeSystem cClass Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.html
NOTE: For additional product and licensing information about Insight Control Environment for
BladeSystem, HP Systems Insight Manager and Essentials software refer to
http://www.hp.com/servers/proliantessentials.
HP Insight Control management suites and most HP ProLiant Essentials include one year of 24 x 7 HP
Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, please visit:
http://www.hp.com/services/insight.
Server Management
Standalone Software
Product - ProLiant
Essentials
HP Systems Insight
Manager
ProLiant Essentials Rapid
Deployment Pack
DA - 12773
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers, storage
and other infrastructure devices, (both HP and non-HP) across multiple
operating system platforms.
Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a
complete deployment solution for HP ProLiant blade servers. RDP provides a
central location to configure server hardware, deploy Windows, Linux and
VMware ESX operating environments and install HP ProLiant Support Pack
drivers using images and scripted profiles.
North America — Version 12 — February 29, 2008
Page 6
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
ProLiant Essentials Server Upgrading, replacing, or virtualizing your existing server? Effortlessly
Migration Pack - Universal transition to new virtual or physical HP ProLiant servers or BladeSystem with
Edition
automated, accurate and affordable migration of OS, application and data.
SMP Universal automates the manual processes required for migrating
servers between physical or virtual platforms, whether migrating to VMware
or Microsoft virtual machines. SMP Universal allows all of the following
migrations:
physical to ProLiant
physical to virtual
virtual to virtual
virtual to ProLiant
NOTE: For more information, visit: http://www.hp.com/go/migrate.
ProLiant Essentials
Performance Management Pack (offered exclusively through the Insight
Performance Management Control suites) - a performance management solution that identifies and
Pack
explains hardware performance bottlenecks on ProLiant servers and attached
options enabling users to better utilize their valuable resources.
Integrated Lights-Out
Upgrades the iLO 2 processor with enhanced console sharing and replay,
Select Pack
virtual media (floppy, CD/DVD, USB key), virtual folders, historical power
reporting, power capping and enterprise security (directory services and twofactor authentication) for servers managed using remote consoles available
in iLO 2 Standard and iLO 2 Standard Blade Edition.
iLO Power Management Is energy-efficient management software that delivers centralized control,
Pack
reliable security, and energy savings for your BladeSystem infrastructure.
iPMP combines the total control of iLO 2 Advanced in the area of remote
management with the energy monitoring and control of the Insight Power
Manager to deliver a robust solution capable of full remote control and
power management of ProLiant servers through a unified interface within HP
Systems Insight Manager.
Insight Power Manager
Upgrades the single-server remote management capabilities of iLO
(IPM)
Select/Advanced to include centralized reporting and policy-based
management of power consumption and thermal output provided by the
Insight Power Manager. IPM unifies all of this functionality within a single
user interface - HP Systems Insight Manager.
Virtual Machine
Get the most out of server virtualization by unifying the management of
Management Pack
physical and virtual servers in HP Systems Insight Manager. The Virtual
Machine Management Pack plug-in provides central management and
control of VMware and Microsoft virtual machines and provides physical host
to virtual machine association. The Server Migration Pack plug-in automates
the manual task of migrating servers between physical or virtual platforms.
NOTE: Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to:
http://www.hp.com/servers/proliantessentials or the various ProLiant
Essentials Value Pack product QuickSpecs for more information.
NOTE: Selected software packages listed here include one year of 24 x 7
Software Technical Support and Update Service. If you have any questions
about this service please visit the HP website at:
http://www.hp.com/services/insight.
DA - 12773
North America — Version 12 — February 29, 2008
Page 7
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Core Infrastructure
Management
Vulnerability and Patch
Management Pack
Vulnerability and Patch Management Pack (offered exclusively through the
Insight Control suites) - identifies and remediates software security
vulnerabilities due to missing patches as well operating system configurations
that can be exploited by viruses, worms, and other blended threats.
SmartStart
SmartStart is a tool that simplifies single server setup, providing a rapid way
to deploy reliable and consistent server configurations. SmartStart 7.60 and
later can now deploy the HP ProLiant BL680c G5 using the I/O port with an
attached USB CD-ROM device. To obtain a copy of SmartStart for your
blade server order or download your copy from the SmartStart web site. For
more information, please visit the SmartStart website at:
http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 7.60
The Insight Management Agents should be installed on all HP servers to
present system instrumentation, health and configuration information into HP
Systems Insight Manager and the HP System Management Homepage. The
HP System Management Homepage aggregates systems data from Insight
Management Agents and other HP management tools, providing a
consolidated browser-based interface for managing individual servers.
Insight Management
Agents
Insight Management Agents and The HP System Management Homepage
are included on ProLiant Support Packs, and can also be installed using the
server profiles provided with the ProLiant Essentials Rapid Deployment Pack.
Subscriber's Choice
ProLiant Support Packs
and ROMPaq, software
DA - 12773
For additional information about the Management Agents and the HP
System Management Homepage please visit the management Web site at:
http://www.hp.com/servers/manage.
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options, available through ProLiant Support Packs the
ProLiant Essentials Rapid Deployment Pack, SmartStart or downloaded from
software and drivers download pages website at:
http://www.hp.com/go/support.
North America — Version 12 — February 29, 2008
Page 8
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
OS Support
Microsoft Windows Server 2003, Standard Edition (32 and 64-bit)
Microsoft Windows Server 2003, Enterprise Edition (32 and 64-bit)
Microsoft Windows Server 2003, Compute Cluster Server
Microsoft Windows Server 2003, Datacenter (Non-High Availability)
Microsoft Windows Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
VMware ESX 3.0 Server
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS
Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select
your server: http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc
=us&taskId=135&prodTypeId=15351&prodCatId=241435.
Integrated Manageability Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (integrated on motherboard)
Virtual KVM based remote console
Virtual media (single server, browser based access only)
Remote serial console
Virtual power button control
Virtual Unit ID control
Integrated remote console (ActiveX Control client)
Dedicated network connectivity
OS independent hardware health status present server power consumption
Browser, command line and scripted access
Automatic IP configuration via DHCP/DNS/WINS
Industry standard 128-bit secure sockets layer (SSL) and secure shell security (SSH)
Advanced encryption standard (AES)/triple data encryption standard (3DES)
IML and iLO event logging
Support for 12 user accounts with customizable access privilege
Single sign-on from HP BladeSystem Onboard Administrator
Availability
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Four (4) embedded Gigabit Ethernet adapters for redundant LAN connections
Multiple mezzanine I/O expansion
Four (4) hot-plug SAS/SATA hard drive bays and integrated RAID (HP Smart Array P400i)
controller on every server blade (battery-backed write cache is optional)
Redundant ROM
Advanced ECC Memory - can correct a multi-bit error (up to 4 bits) that occurs within one
memory chip
Memory mirroring with memory online spare capacity
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load
balancing)
DA - 12773
North America — Version 12 — February 29, 2008
Page 9
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Industry Standard
Compliance
Security
Factory Express Portfolio
for Servers and Storage
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
One (1) internal USB 2.0 connector for security key devices and USB drive keys
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
Integrated Lights-Out 2 can be disabled via a global setting
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs and expectations of our valued
customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or
an Authorized Partner for assistance.
Service and Support
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for
three years from date of purchase. Support for software and initial setup is available for 90 days from
date of purchase. Additional support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care Pack services or customized
service agreements.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Additional
information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
HP Care Pack services provide total care and support expertise with committed response designed to
meet your IT and business needs.
The HP Care Pack service for HP ProLiant BL c-Class server blades cover the server blade and all HP
branded hardware options qualified for the server, purchased at the same time or afterwards, internal to
the server.
DA - 12773
North America — Version 12 — February 29, 2008
Page 10
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
To fully capitalize on your HP BladeSystem servers' capabilities, a service partner is required who
thoroughly understands your server technology and systems environment. HP Services, an industry leader
in provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation, HP has a BladeSystem server
support offer to help you speedily deploy and maximize system uptime.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c7000 and
c3000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care
Pack service level support should always be uplifted to match existing storage or server service level.
To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a BladeSystem server
support offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance and management.
Support Service - 4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
Deployment Service - Installation and Start Up for HP BladeSystem Infrastructure
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - HP Proactive BladeSystem Service, 1-Year
Deployment Service - Enhanced Network Installation and Start-up for HP BladeSystem Switches
Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network
Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a
scheduled basis 8am-5pm, M-F, excluding HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
http://www.hp.com/go/proliant/carepack
DA - 12773
North America — Version 12 — February 29, 2008
Page 11
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Models
Quad-Core Models
HP ProLiant BL680c G5
2.4/2x4M,80W (2P)
443528-B21
Processor(s)
One of the following
depending on model
HP ProLiant BL680c G5
2.4/2x3M, 80W (2P)
449316-B21
Cache Memory
One of the following
depending on model
Memory
Network Controller
HP ProLiant BL680c G5
2.13/2x2M,80W (2P)
443529-B21
HP ProLiant BL680c G5
1.6/2x2M,80W (2P)
443530-B21
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
DA - 12773
(2) Quad-Core Intel® Xeon® Processor E7340 (2.40 GHz, 2x4 MB, 80W)
(2) Quad-Core Intel® Xeon® Processor E7330 (2.40 GHz, 2x3 MB, 80W)
(2) Quad-Core Intel® Xeon® Processor E7320 (2.13 GHz, 2x2 MB, 80W)
(2) Quad-Core Intel® Xeon® Processor E7310 (1.60 GHz, 2x2 MB 80W)
2x4 MB Level 2 cache memory
2x3 MB Level 2 cache Memory
2x2 MB Level 2 Cache Memory
8 GB (4x2 GB) PC2-5300, FBD DDR2-667
Four (4) embedded Gigabit Ethernet network adapter ports, plus one (1)
additional management network adapter port:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters
One (1) NC326i Dual Port Gigabit Server Adapter
One (1) additional embedded 10/100 network adapter dedicated to
iLO 2 management
Integrated HP Smart Array P400i Controller with 256 MB cache, RAID 0/1,
and optional battery-backed write cache upgrades
No drives included; two (2) SFF SAS/SATA drive bays
292 GB SAS
240 GB SATA
None
Up to 4 full-height blades supported in the HP BladeSystem c3000 enclosure
Up to 8 full-height blades supported in the HP BladeSystem c7000 enclosure
North America — Version 12 — February 29, 2008
Page 12
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Blade.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL680c G5 CTO Blade
Configurable Model ships with:
Four (4) embedded Gigabit Ethernet network adapter ports, plus one (1) additional
management network adapter port:
443527-B21
Two (2) embedded NC373i Multifunction Gigabit Server Adapters
One (1) NC326i Dual Port Gigabit Server Adapter
One (1) additional embedded 10/100 network adapter dedicated to iLO 2
management
Integrated HP Smart Array P400i Controller with 256 MB cache and RAID 0/1
NOTE: Controller cache module selection is required. Select either the standard 256
MB module or the 512 MB module with BBWC upgrade in step 2 below.
Two (2) small form factor (SFF) SAS/SATA hot-plug hard drive bays
Integrated Lights-Out 2 Standard Blade Edition
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
Processors
Memory
Quad-Core Intel® Xeon® Processor E7340 (2.40 GHz, 2x4 MB, 80W, 2P kit)
NOTE: If 4 processors are desired, select one 443691-L21 and one 443691-B21
Quad-Core Intel® Xeon® Processor E7330 (2.40 GHz, 2x3 MB, 80W, 2P kit)
NOTE: If 4 processors are desired, select one 449321-L21 and one 449321-B21
Quad-Core Intel® Xeon® Processor E7320 (2.13 GHz, 2x2 MB, 80W, 2P kit)
NOTE: If 4 processors are desired, select one 443692-L21 and one 443692-B21
Quad-Core Intel® Xeon® Processor E7310 (1.86 GHz, 2x2 MB, 80W, 2P kit)
NOTE: If 4 processors are desired, select one 443693-L21 and one 443693-B21
Quad-Core Intel® Xeon ®Processor L7345 (1.86 GHz, 2x4 MB, 50W, 2P kit)
NOTE: If 4 processors are desired, select one 450963-L21 and one 450963-B21
Dual-Core Intel® Xeon® Processor E7220 (2.93 GHz, 2x4 MB, 80W, 2P kit)
NOTE: If 4 processors are desired, select one 450961-L21 and one 450961-B21
2 GB FBD PC2-5300 2 x 1 GB Kit
4 GB FBD PC2-5300 2 x 2 GB Kit
8 GB FBD PC2-5300 2 x 4 GB Kit
8 GB FBD PC2-5300 2 x 4 GB LP Kit, Low Power
16 GB FBD PC2-5300 2 x 8 GB Kit
HP 2 GB FBD PC2-5300 2 x 1 GB Low Power Kit
HP 4 GB FBD PC2-5300 2 x 2 GB Low Power Kit
DA - 12773
North America — Version 12 — February 29, 2008
443691-L21
449321-L21
443692-L21
443693-L21
450963-L21
450961-L21
397411-B21
397413-B21
397415-B21
466440-B21
413015-B21
461826-B21
461828-B21
Page 13
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Configuration Information - Factory Integrated Models
Smart Array P400i
upgrade options
NOTE: Memory Option Kits described as LP include Low Power DIMMs. For more
information on ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: Two-way memory interleaving is enabled when an identical pair of DIMMs is
installed.
HP Smart Array P400i 256 MB cache
HP Smart Array P400i 512 MB and battery-backed write cache upgrade
405139-B21
405148-B21
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, including server blade enclosures, interconnect options and power subsystem options; please see the
following QuickSpecs:
HP BladeSystem c-Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.html
HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.html
DA - 12773
North America — Version 12 — February 29, 2008
Page 14
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Options
Ethernet Mezzanine
Options
HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class BladeSystem
HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter for c-Class
BladeSystem
HP NC512m Dual Port 10GbE Multifunction BL-c Adapter
NOTE: An NC512m network adapter card is required for each server blade
connecting to the HP 10Gb Ethernet BL-c Switch.
NOTE: A maximum of one NC512m is supported per server in a type II mezzanine
slot.
NOTE: The NC512m requires a minimum of 4 GB of server memory and supports a
maximum of 32 GB. Therefore, when an NC512m is installed in a blade server, the
server is limited to a maximum of 32 GB of memory.
416585-B21
406771-B21
445978-B21
447883-B21
406770-B21
440910-B21
Fibre Channel Mezzanine Emulex LPe1105 FC Dual Channel 4Gb, PCI-E-to-Fibre Channel Host Bus Adapter
Options
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem
403621-B21
403619-B21
HP InfiniBand Mezzanine HP 4X DDR IB DUAL PORT Mezzanine HCA for HP BladeSystem c-Class
Options
HP 4X DDR IB Mezzanine HCA for HP BladeSystem c-Class
HP HPCD 4X DDR IB Mezzanine HCA for HP BladeSystem c-Class
448262-B21
410533-B21
409377-B21
c-Class Mezzanines
431643-B21
HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem c-Class
NOTE: Required to support the HP StorageWorks SB40c Storage Blade (P/N
411243-B21) with HP c-Class BladeSystem full-height server blades.
HP StorageWorks SB40c HP StorageWorks SB40c Storage Blade
Storage Blade
NOTE: Please see the SB40c Storage Blade QuickSpecs for additional options and
configuration information at
http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.html
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem c-Class
(P/N 431643-B21) is required to support the HP StorageWorks SB40c Storage Blade
with HP c-Class BladeSystem full-height server blades.
411243-B21
HP PCI Expansion Blade
448018-B21
HP PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe
connect board which requires installation.
NOTE: Please see the HP PCI Expansion Blade QuickSpecs for additional options and
configuration information at:
http://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.html
DA - 12773
North America — Version 12 — February 29, 2008
Page 15
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Options
HP c-Class Tape Blades
HP StorageWorks Ultrium 448c Tape Blade
HP StorageWorks SB920c Tape Blade
NOTE: Please see the HP Tape Blades QuickSpecs for additional options and
configuration information at:
http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
NOTE: Please visit the BladeSystem c-Class enclosure QuickSpecs for a complete list
of recommended data protection solutions for BladeSystem c-Class enclosures
http://www.hp.com/go/blades.
HP Insight Control
Management Suites
NOTE: Electronic licensing options are available for Insight Control suites software
products. Please see the appropriate Insight Control QuickSpecs for additional
information.
Insight Control Environment for BladeSystem
HP Insight Control Environment for BladeSystem, No Media 1-Server License including
1 year of 24x7 Technical Support and Updates
NOTE: Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service.
HP Insight Control Management Software Media Kit
NOTE: Insight Control Management DVD media without licenses. Contains Insight
Manager and Essentials software products and components licensed by Insight
Control Management suites. Uses an integrated installer to perform quick and
accurate software installation and updates.
NOTE: For additional HP Insight Control Environment, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP iLO Power Management Pack for HP BladeSystem
HP iLO Power Management Pack for BladeSystem, No Media, 1-Server License
including 1 year of 24x7 Technical Support and Updates
NOTE: This option kit includes 1 license for iLO Select and Insight Power Manager.
Customer will receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax in order to
obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support and Update Service.
NOTE: For additional HP Insight Power Manager Packs, please see the QuickSpecs
at: http://h18000.www1.hp.com/products/quickspecs/12632_na/12632_na.html
Server Management
Stand Alone Software
Product – ProLiant
Essentials
NOTE: Electronic licensing options are available for Insight Control suites and select
ProLiant Essentials software products. Please see the appropriate Insight Control and
ProLiant Essentials QuickSpecs for additional information.
Deploy
ProLiant Essentials Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1
year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP. Customer
will receive a printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain the
DA - 12773
North America — Version 12 — February 29, 2008
440947-B21
AJ401A
453484-B21
436222-B21
442937-B21
452151-B21
Page 16
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Options
license activation key(s). Includes one year of 24 x 7 HP Software Technical Support
and Update Service.
NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits, please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html
Server Migration Pack – Universal Edition
HP Server Migration Pack – Universal Edition, No Media, Physical / Virtual to ProLiant
Single Migration License, including 1 year of 24x7 Technical Support
NOTE: This license allows 1 physical to ProLiant or virtual to ProLiant migration.
Customer will receive a printed license entitlement certificate and documentation via
physical shipment. The license entitlement certificate must be redeemed online or via
fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support Service.
HP Server Migration Pack – Universal Edition, No Media, Physical / Virtual to Virtual
Single Migration License, including 1 year of 24x7 Technical Support
NOTE: This license allows 1 physical to virtual or virtual to virtual migration.
Customer will receive a printed license entitlement certificate and documentation via
physical shipment. The license entitlement certificate must be redeemed online or via
fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support Service.
HP Server Migration Pack – Universal Edition, No Media, 1-Year Unlimited Migration
License, including 1 year of 24x7 Technical Support and Updates NOTE: This license
allows unlimited migrations (physical to ProLiant, physical to virtual, virtual to virtual,
and virtual to ProLiant) for one year. Customer will receive a printed license
entitlement certificate and documentation via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain the
license activation key(s). Includes one year of 24 x 7 HP Software Technical Support
and Update Service.
NOTE: For additional Server Migration Pack - Universal Edition License Kits please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12855_na/12855_na.html
Control
Integrated Lights-Out Select Pack
ProLiant Essentials Integrated Lights-Out Advanced Pack, No Media, 1-Server License
Featuring: Sophisticated remote control and security features for HP BladeSystem
servers and ProLiant ML/DL servers.
NOTE: For additional ProLiant Essentials Integrated Lights-Out Value Packs, please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.html
Optimize
HP Insight Power Manager (IPM)
HP Insight Power Manager, No Media, 1-Server License, including 1 year of 24x7
Technical Support and Updates
NOTE: Customers purchasing this upgrade must already have an iLO Advanced or
Select license on each managed server. Customer will receive a printed license
entitlement certificate via physical shipment. The license entitlement certificate must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support and Update Service.
DA - 12773
North America — Version 12 — February 29, 2008
460750-B21
460753-B21
460756-B21
452158-B21
452677-B21
Page 17
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Options
NOTE: For additional HP Insight Power Manager Packs, please see the QuickSpecs
at: http://h18000.www1.hp.com/products/quickspecs/12623_na/12623_na.html
ProLiant Essentials Virtual Machine Management Pack
ProLiant Essentials Virtual Machine Management Pack, No Media, 1-Server License,
including 1 year of 24x7 Technical Support and Updates
NOTE: Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service.
NOTE: For additional ProLiant Virtual Machine Management Pack License Kits please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12328_na/12328_na.html
452153-B21
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various
ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the
following URL: http://www.hp.com/servers/proliantessentials.
Processor
Quad-Core Intel® Xeon® Processor E7340 (2.40 GHz, 2x4 MB, 80W, 2P)
Quad-Core Intel® Xeon® Processor E7330 (2.40 GHz, 2x3 MB, 80W, 2P)
Quad-Core Intel® Xeon® Processor E7320 (2.13 GHz, 2x2 MB, 80W, 2P)
Quad-Core Intel® Xeon® Processor E7310 (1.60 GHz, 2x2 MB, 80W, 2P)
Quad-Core Intel® Xeon® Processor L7345 (1.86 GHz, 2x4 MB, 50W, 2P)
Dual-Core Intel® Xeon® Processor E7220 (2.93 GHz, 2x4 MB, 80W, 2P)
443691-B21
449321-B21
443692-B21
443693-B21
450963-B21
450961-B21
Memory
2 GB FBD PC2-5300 2x1 GB Kit
4 GB FBD PC2-5300 2x2 GB Kit
8 GB FBD PC2-5300 2x4 GB Kit
8 GB FBD PC2-5300 2 x 4 GB LP Kit, Low Power
16 GB FBD PC2-5300 2x8 GB Kit
HP 2 GB FBD PC2-5300 2x1 GB Low Power Kit
HP 4 GB FBD PC2-5300 2x2 GB Low Power Kit
397411-B21
397413-B21
397415-B21
466440-B21
413015-B21
461826-B21
461828-B21
DA - 12773
North America — Version 12 — February 29, 2008
Page 18
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Options
Hard Drives
Serial Attached SCSI (SAS) SFF Hot Plug
HP 72 GB 3G SAS 15k SFF DP HDD
HP 72 GB 3G SAS 15K SFF SP HDD
HP 36 GB 3G SAS 15k SFF DP HDD
HP 36 GB 3G SAS 15K SFF SP HDD
HP 146 GB 3G SAS 10K SFF DP HDD
HP 146 GB 3G SAS 10K SFF HDD
HP 72 GB 3G SAS 10K SFF DP HDD
HP 72 GB 3G SAS 10K SFF SP HDD
HP 36 GB 3G SAS 10K SFF SP HDD
NOTE: SAS drives have a 3 year warranty.
NOTE: Please see the SAS Hard Drive QuickSpecs for technical specifications such as
capacity, height, width, interface, transfer rate, seek time, physical configuration, and
operating temperature:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
SFF SATA Hot Plug
HP 120 GB 1.5G SATA 5.4K SFF HDD
HP 60 GB 1.5G SATA 5.4K SFF HDD
NOTE: SATA drives have a 1 year warranty. Please see the SATA Hard Drive
QuickSpecs for technical specifications such as capacity, height, width, interface,
transfer rate, seek time, physical configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html
Storage Controllers
P400i Battery-backed write cache upgrade
P400i 512 MB and battery-backed write cache upgrade
Cluster Options
NOTE: For configuration/certification options for the HP Parallel Database Cluster for
Oracle RAC please go to: http://www.hp.com/solutions/highavailability/oracle
NOTE: For additional information regarding the HP ProLiant Cluster for HA/F500
please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/10232_na/10232_na.html
ProLiant Cluster Starter Kit
NOTE: For additional information regarding the ProLiant Cluster Starter Kit please see
the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11935_na/11935_na.html
HP Serviceguard for Linux ProLiant Cluster, A.11.18
(single license version - Red Hat EL 4&5, SUSE SLES10)
HP Serviceguard for Linux, A.11.18
(2 license version - Red Hat EL 4&5, SUSE SLES10)
HP Serviceguard for Linux and Red Hat Global File System - 1 year subscription
HP Serviceguard for Linux and Red Hat Global File System - 3 years subscription
NOTE: For additional information regarding the HP Serviceguard for Linux License,
please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11518_na/11518_na.html
DA - 12773
North America — Version 12 — February 29, 2008
418371-B21
431935-B21
418369-B21
431933-B21
418367-B21
431958-B21
384842-B21
375861-B21
375859-B21
431786-B21
379306-B21
383280-B21
405148-B21
364023-B22
307754-B27
305199-B27
T2798AA#001
T2798AA#003
Page 19
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Options
USB Options
HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
HP 1 GB USB 2.0 Floppy Drive Key
HP 256 MB USB 2.0 Floppy Drive Key
External USB 2.0 Multi-Bay II Cradle
Multibay II 9.5mm DVD Drive
USB 2.0 4-port Hub
HP USB 04 Standard Keyboard
Service and Support
Offerings
(HP Care Pack Services)
NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server
blades, cover the server blade and all HP branded hardware options qualified for the
server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite,
onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
DA - 12773
North America — Version 12 — February 29, 2008
DC172B
442085-B21
442084-B21
PA509A
PA849A
DG954A
DT528A#ABA
UE458E
UE459E
UE460E
UE473E
Page 20
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
DIMM installation guidelines:
1.
2.
3.
4.
5.
All DIMMs must be PC2-5300 Fully Buffered DIMMs running at 667 MHz.
Both DIMM slots in a memory bank must be populated.
Banks must be populated in sequential alphabetic order, starting with bank A.
Both DIMMs in a memory bank must be identical. Install identical DIMMs as pairs only, starting with DIMM socket 1, bank A.
Standard memory and lower power DIMMs may be mixed within the same server, but not within the same memory bank (see
#4 above).
6. Low power DIMM kits save approximately 2 watts per server DIMM, plus any datacenter power savings resulting from reduced
cooling of heat dissipated from the lower server watt usage.
7. Multiple advanced memory protection (AMP) modes are supported based on FB DIMM population and RBSU selection. The
server blade defaults to Advanced ECC.
HP ProLiant BL680c Server G5 (1P Model)
Standard Memory
8 GB (2x4 GB) of PC2-5300, FBD DDR2-667 ECC DIMMs
Standard Memory Plus Optional Memory
Up to 104 GB of PC2-5300, FBD DDR2-667 DIMM memory is available with the installation of optional PC2-5300, FBD DDR2667 DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 128 GB of PC2-5300, FBD DDR2-667 DIMM memory is available with the removal of standard memory and the installation
of optional PC2-5300, FBD DDR2-667 DIMM memory expansion kits.
Memory
Standard
Optional
Maximum
Slot
8 GB
1A
2 GB
9B
2 GB
2C
Empty
10D
Empty
3E
Empty
11F
Empty
4G
Empty
12H
Empty
5A
2 GB
13B
2 GB
6C
Empty
14D
Empty
7E
Empty
15F
Empty
8G
Empty
16H
Empty
104 GB
1A
2 GB
9B
2 GB
2C
8 GB
10D
8 GB
3E
8 GB
11F
8 GB
4G
8 GB
12H
8 GB
5A
2 GB
13B
2 GB
6C
8 GB
14D
8 GB
7E
8 GB
15F
8 GB
8G
8 GB
16H
8 GB
128 GB
1A
8 GB
9B
8 GB
2C
8 GB
10D
8 GB
3E
8 GB
11F
8 GB
4G
8 GB
12H
8 GB
5A
8 GB
13B
8 GB
6C
8 GB
14D
8 GB
7E
8 GB
15F
8 GB
8G
8 GB
16H
8 GB
DA - 12773
North America — Version 12 — February 29, 2008
Page 21
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Memory
HP ProLiant BL680c G5 memory options:
Following are memory options available from HP:
2 GB FBD PC2-5300 2 X 1 GB Kit
4 GB FBD PC2-5300 2 x 2 GB Kit
8 GB FBD PC2-5300 2 x 4 GB Kit
8 GB FBD PC2-5300 2 x 4 GB LP Kit, Low Power
16 GB FBD PC2-5300 2x8 GB Kit
HP 2 GB FBD PC2-5300 2x1 GB Low Power Kit
HP 4 GB FBD PC2-5300 2x2 GB Low Power Kit
DA - 12773
North America — Version 12 — February 29, 2008
397411-B21
397413-B21
397415-B21
466440-B21
413015-B21
461826-B21
461828-B21
Page 22
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Storage
1-2
2 x SFF SAS or SATA hot-plug hard drives
Hard Drives
SAS Hard Drive
72 GB 15,000 rpm SFF
SAS
36 GB 15,000 rpm SFF
SAS
146 GB 10,000 rpm SFF
SAS
72 GB 10,000 rpm SFF
SAS
36 GB 10,000 rpm SFF
SAS
Quantity
Supported
2
Position
Supported
1-2
Controller
Quantity
Supported
2
Position
Supported
1-2
Controller
Smart Array P400i Controller
Serial-ATA (SATA) Hard Drive
120 GB 5,400 rpm SFF
SATA
60 GB 5,400 rpm SFF
SATA
DA - 12773
Smart Array P400i Controller
North America — Version 12 — February 29, 2008
Page 23
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Technical Specifications
System Unit
Dimensions
(H x W x D)
Weight
(approximate)
Power Specifications
Full height server blade: 14.42 x 2.03 x 20.06 in (36.17 x 5.16 x 50.95 cm)
Maximum
21 lb (9.5 kg)
(all hard drives and
processors installed)
Minimum
19 lb (8.6 kg)
(one hard drive and processor
installed)
For power specifications including input requirements, BTU rating, and power
supply output, please see the HP BladeSystem c-Class Infrastructure
QuickSpecs located at:
http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.html
To review typical system power ratings use the HP BladeSystem Power Sizer
available at: http://www.hp.com/go/bladesystem/powercalculator.
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be reduced
if operating with a fan fault or above 30°C
(86°F).
Non-Operating
-30° to 60°C (-22° to 140°F), maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 85% relative humidity (Rh), 28°C (82.4°F)
Relative Humidity
(non-condensing)
maximum wet bulb temperature, noncondensing.
Non-Operating
10 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, noncondensing.
Operating
3050 m (10,000 ft). This value may be limited
Altitude
by the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
For acoustic noise specifications, please see the HP BladeSystem c-Class
Acoustic Noise
Infrastructure QuickSpecs located at:
http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.html
DA - 12773
North America — Version 12 — February 29, 2008
Page 24
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Technical Specifications
Smart Array P400i
Controller
Disk Drive and Enclosure 3G SAS (Serial Attached SCSI)
Interface
1.5G SATA (Serial Advanced Technology Attachment)
2 internal (SFF8484) x4 wide port connectors
SAS Connectors
DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
Cache Memory Speed
maximum bandwidth.
x8 2.5G PCIe provides 2 GB/s maximum bandwidth.
Server Interface
x8 3G SAS provides 2.4 GB/s maximum bandwidth.
SAS Speed
40-bit 256 MB cache (72-bit 512MB module upgrades available); ECC
Cache Memory
protection, battery-backed, and transportable
Logical Drives Supported Up to 32 logical drives
Maximum Logical Drive 584 GB (4 x 146 GB) SAS
Capacity
480 GB (4 x 120 GB) SATA
Host Memory Addressing 64-bit, supporting greater than 4 GB server memory space
RAID 1 (Mirroring)
RAID Support
RAID 0 (Striping)
Upgradeable Firmware with recovery ROM feature
Upgradeable Firmware
Embedded NC326i Dual Network Processor
Port Gigabit Server
Data Transfer Method
Adapter
Network Transfer Rate
IEEE Compliance
Standard Features
DA - 12773
Broadcom 5715S
Four lane (x4) PCI Express
Two ports, each at 1000 Mb/s (Theoretical Maximum Values)
802.1p, 802.1Q, 802.3, 802.3ad, and 802.3x
9K Jumbo frames
TCP/IP checksum offload (TCO)
Large send offload (LSO)
Interrupt coalescence
Dual address cycles (DAC)
Wake-on-LAN (WOL)
Pre-boot execution environment (PXE)
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
IPv6 packet transmit and receive (excluding all offload capabilities);
IPv6 aware SNMPv1 agents for Windows
North America — Version 12 — February 29, 2008
Page 25
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Technical Specifications
Embedded NC373i
Multifunction Gigabit
Server Adapters
Network Processor
Data Transfer Method
Network Transfer Rate
IEEE Compliance
Standard Features
Broadcom 5708S
Four lane (x4) PCI Express
1000 Mb/s (theoretical maximum values)
802.1p, 802.1Q, 802.3, 802.3ad, and 802.3x
TCP/IP offload engine (TOE) for Microsoft Windows 2003
iSCSI boot for Linux
9K Jumbo frames
TCP/IP checksum offload (TCO)
Large send offload (LSO)
Interrupt coalescence
Dual address cycles (DAC)
Wake-on-LAN (WOL)
Pre-boot execution environment (PXE)
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
IPv6 packet transmit and receive (excluding all offload capabilities);
IPv6 aware SNMPv1 agents for Windows
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12773
North America — Version 12 — February 29, 2008
Page 26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement