Dodge MagnaGear Catalog
2009
DODGE® MAGNAGEAR
GEARING
ENGINEERING CATALOG
Features/Benefits
CONTENTS
MagnaGear
Features & Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Easy Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Selection/Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Engineering/Technical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Specifications
Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Selection/Dimensions
Easy Selection
Nomenclature
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1
1
Features/Benefits
FEATURES/BENEFITS
MagnaGear XTR
④
⑦
②
⑧
Specifications
⑤
Nomenclature
①
⑨
③
Easy Selection
1. Longer-Life Bearings
Bearing designs meet or exceed AGMA standards, resulting in projected L-10 life over twice that of most competitors
2. Tandem Lip Seals
Working together, MagnaGear XTR reducer’s standard HNBR lip seals minimize shaft wear, provide high temperature protection and
twice the sealing power to contain lubricant and protect against contaminates
3. Power Dense Design
Heavy-duty power dense design gives you more power in less space and proven DODGE Planetary Gearing
Selection/Dimensions
4. Universal Housing
Rugged cast iron housing with multiple mounting pads allows a variety of mounting configurations and is reversible to minimize
spares
5. Housing designed to increase heat dissipation
6. Oversized Inspection Covers
Oversized inspection covers on the MagnaGear XTR reducer housing allows easy accessibility
7. High precision hardened and ground gearing
8. Gear tooth geometry designed to maximize efficiency
9. Available in right angle or parallel shaft configurations
2
MagnaGear XTR
Design Elements and Proven Dodge Features
Features/Benefits
FEATURES/BENEFITS
MagnaGear XTR Advantages
• Maximum reliability
• Proven Dodge reducer technology
• Premium seal arrangement
• Premium gearing designed with FEA (Finite Element Analysis) computer modeling
• Improved heat dissipation
• Capabilities exceeding 2,500 Hp
Specifications
• Longer bearing life
• Lower Total Cost of Ownership
Selection/Dimensions
Easy Selection
Nomenclature
• Easy maintenance
3
Features/Benefits
SPECIFICATIONS
GENERAL SPECIFICATIONS for DODGE MAGNAGEAR Speed
Reducers to 920,000 in-lbs
Specifications
MagnaGear speed reducers are a 2 or 3 stage reduction in a
parallel or right angle shaft configuration. Gearing type is helical,
bevel helical and planetary. Output shaft is solid or hollow with a
twin taper bushing. Mounting configurations include foot or shaft
mounting and standard mounting accessories include solid base,
swing base and tunnel housing. Cooling systems include a shaft
mounted fan, electric fan or external cooling system with a water
to oil or air to oil heat exchanger.
as for low ambient temperatures down to -15˚F (-26˚C) may be
used. Recommended oil viscosity ISO grade is 220EP to 320EP,
depending on output RPM and ambient temperature.
Gearing
Bearings
MagnaGear reducers are compatible with rust and oxidation
inhibiting (R&O) and polyalpha olefin (PAO) lubricants.
Oil sampling ports are standard.
Bearings are spherical type on planetary gears, all others are
tapered roller type.
MagnaGear sizes G100 through G390 utilize helical or bevel helical
gearing. Sizes G525 through G920 utilize helical or bevel helical
gearing with a planetary gear output.
Bearings ratings are based on a minimum unadjusted L-10 life of
5000 hours, providing a minimum 25,000 hour average life.
Gear materials are a carburizing grade alloy steel which meets an
AGMA Grade 2 standard. All gearing is case carburized to ensure a
high surface durability and resilient tooth core for greater impact
resistance and longer service life.
Sealing
Nomenclature
Input and output shaft seals are a tandem radial lip arrangement.
Between the tandem seals is a grease purge cavity.
Bevel, helical, planet gears and sun pinion are ground after heat
treating and carburizing to an AGMA Q11 minimum quality level.
Gear quality is equivalent to DIN Grade 6 standard.
Seals are constructed of hydrogenated nitrile butadiene rubber
(HNBR).
Castings
Shafts
MagnaGear sizes G100 through G390 are available with a
twin taper bushing hollow output shaft. The taper bushing is
manufactured from ductile iron.
MagnaGear housings are constructed of Class 30 gray iron.
Housings are suitable for horizontal output shaft mounting on 4
sides. The same housings are used for parallel and right angle
reducers.
Shaft extensions are metric dimensions to conform to global
standards.
Easy Selection
Housings are a mono-block construction. MagnaGear sizes
G525 and larger have oversized assembly covers for ease of
maintenance. All housings include bolted end covers instead of
bore plugs. Housings and assembly covers are precision matched
to ensure proper gear alignment.
Backstops
Backstops are a centrifugal throw out, lift off design which
eliminates sprag sliding and reduces wear. Backstops are integrally
mounted on the input shaft of parallel MagnaGear reducers or on
the intermediate shaft of right angle reducers.
Housings include cast cooling fins for greater thermal horsepower
capabilities.
Backstops are lubricated by the oil in the reducer and are EP and
synthetic oil compatible.
Pipe fittings and plugs are NPT.
Selection/Dimensions
Lubrication
Gearing is splash and dip lubricated. Bearings are lubricated by dip
and by gravity feed.
Mineral based EP oils are the preferred lubricant, suitable for
operating temperatures up to 200˚F (93˚C) as well as for low
ambient temperatures down to 25˚F (-4˚C). For applications
outside this temperature range, synthetic lubricants which are
suitable for operating temperatures up to 212˚F (100˚C) as well
4
Features/Benefits
NOMENCLATURE
MAGNAGEAR
G
525
H
R
REDUCER DESIGNATION
G
S
L
3-25
RATIO
= MAGNAGEAR
8
CASE SIZE
100
10
150
11.2
210
12.5
285
14
390
16
525
18
700
20
920
22.4
REDUCER CONFIGURATION
25
= HORIZONTAL
28
SHAFT CONFIGURATION
31.5
R
= RIGHT ANGLE
35.5
P
= PARALLEL
40
SOLID/HOLLOW SHAFT
45
S
= SOLID
50
H
= HOLLOW
56
LEFT HAND/RIGHT HAND OUTPUT SHAFT
= LEFT HAND OUTPUT
R
= RIGHT HAND OUTPUT
63
Easy Selection
L
GEARING STAGES
2
= 2 STAGE
3
= 3 STAGE
Nomenclature
H
Specifications
9
Selection/Dimensions
NOMENCLATURE EXAMPLE: G525HRSL3-25
5
Features/Benefits
EASY SELECTION
MagnaGear Reducer
EASY SELECTION METHOD
(for 1750 RPM motors)
When to Use Easy Selection
Example: Easy Selection Method
Specifications
The MagnaGear Easy Selection tables are for electric motor selections up
to 1400 Hp with input speeds of 1750 rpm using AGMA recom­mended
service factors. For all other motor/prime mover input speeds and horse
powers, use the Horsepower/Torque Selection Method on pages 74
through 90.
NOTE:
A 300 Hp 1750 RPM motor is used to drive a heavy duty belt conveyor at
80 rpm operating 16 hours per day. A parallel shaft reducer is required.
The reducer is coupling connected at both the input and output shafts.
Step 1: Determine Service Factor – From Table 2, Service Factors, locate
“Belt Conveyors - Heavy Duty not Uniformly Fed”. Select the Service
Factor of 1.50 under the column headed 10+ hours/day of service.
If your application has unusual requirements (i.e.,
excessive shock or overloads, extreme ambient
temperatures, non-standard motors or oversized
equipment), refer to Horsepower/ Torque Selection
Method.
Step 2: Determine Unit Size – Turn to the Easy Selection Table for Parallel
Reducers with a 1.5 Service Factor (page 11). Find the column headed
by 350 motor horsepower and read down to a 78 low speed shaft rpm. A
MagnaGear G525 is the correct selection and the nominal ratio is 22.4:1.
How to Select
Nomenclature
Step 1: Determine Service Factor – See Table 2 to deter­mine service
factor for applications under normal condi­tions. Note: When service factor
exceeds 2.0, Horsepower/ Torque Selection Method must be used.
Step 3: Check External Thrust and Overhung Load – Since the input and
output shafts are coupling connected, thrust and overhung loads will not
exist. Consult DODGE about external thrust loads and overhung loads.
Step 2: Determine Unit Size – See Easy Selection tables on pages
10 through 15. Find the service factor table that is required for the
application. Read the unit size under required horsepower and opposite
the required low speed shaft RPM. Note: For applications where fan
cooling is unac­ceptable, use easy selection table with an increased ser­vice
factor.
Step 4: Check Dimensions – Refer to the dimensions for a Dodge
MagnaGear size G525 reducer located on page 63. The part number for
the reducer is 449722 and is found on page 61.
Step 5: Select Accessories – A mechanical cooling fan is required for this
example. Refer to the accessory part numbers for a Dodge MagnaGear
size G525 reducer located on page 62. The part number for a mechanical
cooling fan kit is 453954.
Step 3: Check External Thrust and Overhung Load – Consult DODGE about
external thrust loads and overhung loads.
Easy Selection
Step 4: Check Dimensions – See specification/dimension section, pages
18 through 73 for dimensions, weights, drawings and part numbers.
Step 5: Select Accessories.
Selection/Dimensions
6
The service factors in the table are based upon the use of an electric
or hydraulic motor or the use of a steam or gas turbine as a prime
mover. If the prime mover is a single or multi-cylinder engine, then
the service factor must be adjusted in accordance with Table1.
Table 2: Service Factors
Application
AGITATORS
Pure Liquids
Liquids & Solids
Liquids - Variable
Density
APRON CONVEYORS
Uniformly Loaded
or Fed
Heavy Duty
APRON FEEDERS
ASSEMBLY CONVEYORS
Uniformly Loaded
or Fed
Heavy Duty
BALL MILLS
BARGE HAUL PULLERS
BARKING
Drums (coupling
connected)
Mechanical
BAR SCREENS (Sewage)
BATCHERS (Textile)
BELT CONVEYORS
Uniformly Loaded
or Fed
Heavy Duty
BELT FEEDERS
BENDING ROLLS
(Machine)
BLOWERS
Centrifugal
Lobe
Vane
BOTTLING MACHINERY
BREWING & DISTILLING
Bottling Machinery
Brew Kettles, Cont. Duty
Can Filling Machines
Cookers - Cont. Duty
Mash Tubs - Cont. Duty
Service
3-10
10+Hrs./
Hrs./Day
Day
1.00
1.25
1.25
1.50
1.25
1.50
1.00
1.25
1.25
1.00
1.25
▲
1.25
1.25
1.50
1.50
1.25
1.50
▲
1.50
1.25
1.25
2.00
2.00
1.25
1.50
1.00
1.25
1.25
1.25
1.50
1.50
1.25
1.50
1.00
1.25
1.25
1.00
1.25
1.50
1.50
1.25
1.00
1.25
1.00
1.25
1.25
1.25
1.25
1.25
1.25
1.25
Service
3-10
10+Hrs./
Hrs./Day
Day
Application
Scale Hoppers Frequent Starts
BRICK PRESS (Clay
Working)
BRIQUETTE MACHINES
(Clay Working)
BUCKET
Conveyors Uniform
Conveyors Heavy Duty
Elevators Cont.
Elevators Uniform
Elevators Heavy Duty
CALENDERS
Rubber
Textile
CANE KNIVES
CAN FILLING MACHINES
CARD MACHINES (Textile)
CAR DUMPERS
CAR PULLERS
CEMENT KILNS
CENTRIFUGAL
Blowers, compressors,
Discharge Elevators,
Fans or Pumps
CHAIN CONVEYORS
Uniformly Loaded or Fed
Heavy Duty
CHEMICAL FEEDERS
(Sewage)
CLARIFIERS
CLASSIFIERS
CLAY WORKING IND.
Brick Press
Briquette Machines
Pug Mills
COLLECTORS (Sewage)
COMPRESSORS
Centrifugal
Lobe
1.25
1.50
1.75
2.00
1.75
2.00
1.00
1.25
1.00
1.00
1.25
1.25
1.50
1.25
1.25
1.50
1.00
1.25
1.75
1.25
▲
1.50
1.50
1.50
1.25
1.50
2.00
1.50
▲
1.00
1.25
1.00
1.25
1.25
1.50
1.25
1.00
1.25
1.25
1.25
1.50
1.75
1.75
1.25
1.25
2.00
2.00
1.50
1.25
1.00
1.25
1.25
1.50
1.25
7
Application
Reciprocating:
Multi-cylinder
Single Cylinder
CONCRETE MIXERS
Continuous
Intermittent
CONVEYORS - Uniformly
Loaded or Fed:
Apron Assembly, Belt,
Bucket, chain, Flight
Oven, Screw
CONVEYORS - Heavy Duty
Not Uniformly Fed:
Apron, Assembly, Belt,
Bucket, Chain, Flight,
Oven, Screw
CONVEYORS-Severe Duty
Live Roll Reciprocating
Shaker
COOKERS (Brewing &
Distilling), (Food)
COOLING TOWER FANS
CRANES
CRUSHERS
Ore or Stone
Sugar
DEWATERING SCREENS
(Sewage)
DISC FEEDERS
DISTILLING (See Brewing)
DOUBLE ACTING PUMPS
2 or More Cylinders
Single Cylinder
DOUGH MIXER (Food)
DRAW BENCH (Metal
Mills) carriage & Main
Drive
DREDGES
Cable Reels, Conveyors
Cutter Head & Jig Drives
Service
3-10
10+Hrs./
Hrs./Day
Day
1.50
1.75
1.75
2.00
1.25
1.25
1.50
1.50
1.00
1.25
1.25
1.50
†
1.75
†
2.00
1.25
†
†
1.25
†
†
1.75
2.00
1.50
1.50
1.00
1.50
1.25
1.25
†
1.25
1.50
†
1.50
1.25
1.50
1.25
2.00
1.50
2.00
Features/Benefits
Specifications
Applications which expose the gear drive to high starting torques,
extreme repetitive shock, or where high energy loads must be
absorbed as when stalling, require special consideration. Service
factors for these special appli­cations should be agreed upon by the
user and DODGE since variations of the values in the table may be
required.
Table 1: Conversion Table For Single Or
Multi-Cylinder Engines To Find Equivalent Single Or
Multi-Cylinder Application Factor Or Service Factor
Steam and Gas
Single
Multi
Turbines,
Cylinder
Cylinder
Hydraulic
Engines
Engines
or Electric Motor
1.00
1.50
1.25
1.25
1.75
1.50
1.50
2.00
1.75
1.75
2.25
2.00
2.00
2.50
2.25
2.25
2.75
2.50
2.50
3.00
2.75
2.75
3.25
3.00
3.00
3.50
3.25
3.50
4.00
3.75
Nomenclature
The service factors that follow are adapted from AGMA 6019-E89
Appendix A.
Easy Selection
MagnaGear
Selection/Dimensions
EASY SELECTION
Features/Benefits
EASY SELECTION
MagnaGear
Table 2: Service Factors (continued)
Application
Specifications
Nomenclature
Easy Selection
Selection/Dimensions
Maneuvering Winches
Pumps
Screen Drives
Stackers, Utility Winches
DRY DOCK CRANES
DRYERS & COOLERS
(Mills, Rotary)
DYEING MACHINERY
(Textile)
ELEVATORS
Bucket - Uniform Load
Bucket - Heavy Duty
Centrifugal Discharge
Escalators
Freight
Gravity Discharge
Man. Lifts, Passenger
EXTRUDERS
General
Plastics
Variable Speed Drive
Fixed Speed Drive
Rubber
Continuous Screw
Operation
Intermittent Screw
Operation
FANS
Centrifugal
Cooling Towers
Forced Draft
Induced Draft
Large (Mine, etc.)
Large Industrial
Light (Small Diameter)
FEEDERS
Apron, Belt
Disc
Reciprocating
Screw
FLIGHT
Conveyors, Uniform
Conveyors, Heavy
FOOD/INDUSTRY
Beet Slicers
Bottling, Can Filling
Machine
Cereal Cookers
Dough Mixers, Meat
Grinders
GENERATORS (Not
Welding)
GRAVITY DISCHARGE
ELEVATORS
HAMMER MILLS
HOISTS (See Cranes)
INDUCED DRAFT FANS
KILNS
LAUNDRY
Tumblers
Washers
LINE SHAFTS
Driving Processing
Equipment
Other Line Shafts, Light
LIVE ROLL CONVEYORS
LOBE BLOWERS OR
Service
3-10
10+Hrs/
Hrs./Day
Day
1.25
1.50
2.00
2.00
1.75
2.00
1.25
1.50
†
†
1.50
1.25
1.50
1.00
1.25
1.00
1.00
1.25
1.00
†
1.25
1.50
1.25
1.25
1.50
1.25
†
1.50
1.50
1.50
1.75
1.50
1.75
1.75
1.75
1.75
1.75
1.00
†
1.25
1.50
1.50
1.50
1.00
1.25
†
1.25
1.50
1.50
1.50
1.25
1.25
1.00
1.75
1.25
1.50
1.25
2.00
1.50
1.00
1.25
1.25
1.50
1.25
1.50
1.00
1.00
1.25
1.25
1.25
1.50
1.00
1.25
1.00
1.75
†
1.50
▲
1.25
2.00
†
1.50
▲
1.25
1.50
1.50
2.00
1.25
1
†
1.50
1.25
†
Service
3-10
10+Hrs/
Hrs./Day
Day
1.25
1.50
Application
COMPRESSORS
LOG HAULS (Lumber)
Incline-well Type
LOOMS (Textile)
LUMBER INDUSTRY
Barkers - Spindle Feed
Barkers - Main Drive
Carriage Drive
Conveyors
Burner
Main or Heavy Duty
Main Log
Re-Saw Merry-GoRound
Slab
Transfer
Chains - Floor
Chains - Green
Cut-Off Saws - Chain
& Drag
Debarking Drums
Feeds - Edger
Feeds - Gang
Feeds - Trimmer
Log Deck
Log Hauls - Incline,
Well Type
Log Turning Devices
Planer Feed
Planer Tilting Hoists
Rolls - Live - Off
Bearing - Roll cases
Sorting Table, Tipple
Hoist
Transfer - Chain &
Craneway
Tray Drives
Veneer Lathe Drives
MACHINE TOOLS
Auxiliary Drives
Banding Rolls
Main Drives
Notching Press (Belted)
Plate Planers
Punch Press (Geared)
Tapping Machines
MANGLE (Textile)
MASH TUBS (Brewing &
Distilling
MEAT GRINDERS (Food)
METAL MILLS
Draw Bench Carriages
& Main Drives
Pinch, Dryer & Scrubber
Rolls Reversing
Slitters
Table Conveyors,
Non-Reversing
Group Drives
Individual Drives
Reversing
Wire Drawing &
Flattening Machines
Wire Winding Machines
MILLS, ROTARY
Ball and Rod Mills
with Spur Ring Gear
1.75
1.25
1.75
1.50
1.25
1.75
†
1.50
1.75
†
1.25
1.50
1.75
1.50
1.50
2.00
1.25
1.75
1.25
1.50
1.50
1.50
2.00
1.50
1.50
1.75
1.50
1.75
1.25
1.75
1.25
1.75
1.75
2.00
1.50
1.75
1.50
1.75
1.75
1.75
1.25
1.25
1.75
1.75
1.50
1.50
1.75
1.75
1.25
1.50
1.50
1.25
†
1.75
1.50
†
1.00
1.25
1.25
†
1.75
1.75
1.75
1.25
1.25
1.50
1.50
†
2.00
2.00
2.00
1.50
1.25
1.25
1.25
1.50
1.25
1.50
†
1.25
†
1.50
1.50
2.00
†
1.50
2.00
†
1.50
1.50
2.00
8
Application
with Helical Ring Gear
Direct connected
Cement Kilns, Dryers,
Coolers, Pebble, Plain
& Wedge Bar Mills
Tumbling Barrels
MIXERS (Also see Agitators)
Concrete, Cont. & Int.
Constant Density
Variable Density
NAPPERS (Textile)
OIL INDUSTRY
Chillers
Oil Well Pumping
Paraffin Filter Press
Rotary Kilns
ORE CRUSHERS
OVEN CONVEYORS
Uniform
Heavy Duty
PAPER MILLS (1)
Agitator (Mixer)
Agitator for Pure Liquids
Barking Drums. Barkers
- Mech.
Beater
Breaker Stack
Calender (2)
Chipper
Chip Feeder
Coating Rolls
Conveyors Chip, Bark, Chemical
Log (Incl. Slab)
Couch Rolls
Cutter
Cylinder Molds
Dryers (2)
Paper Mach. &
Conveyor Type
Embosser
Extruder
Fourdrinier Rolls Lumpbreaker, Wire
Turning, Dandy &
Return Rolls
Jordan
Kiln Drive
Mt. Hope & Paper Rolls
Platter
Presses (Felt & Suction)
Pulper
Reel (Surface Type)
Screens Chip, Rotary
Vibrating
Size Press
Super Calender (3)
Thickener & Washer AC Motor
DC Motor
Vacuum Pumps
Wind & Unwind Stand
Winders (Surface Type)
Yankee Dryer (2)
PASSENGER ELEVATORS
PEBBLE MILLS
Service
3-10
10+Hrs/
Hrs./Day
Day
1.50
2.00
1.75
1.50
2.00
1.25
1.00
1.25
1.25
1.50
1.25
1.50
1.50
1.25
†
1.25
1.25
1.75
1.50
†
1.50
1.50
2.00
1.00
1.25
1.25
1.50
1.50
1.25
2.00
1.50
1.25
1.25
2.00
1.50
1.25
1.25
2.00
1.25
2.00
1.25
1.25
1.25
1.50
1.25
1.50
1.50
1.25
1.50
1.25
2.00
1.25
1.50
2.00
1.25
1.25
†
▲
1.50
1.25
1.50
1.25
1.25
1.25
†
▲
PLASTICS INDUSTRY
Primary Processing
Intensive Internal
Mixers
Batch Mixers
Continuous Mixers
Batch Drop Mill 2 Smooth Rolls
Continuous Feed,
Holding & Blend Mill
Compounding Mill
Calenders
Secondary Processing
Blow Molders
Coating
Film
Pipe
Pre-Plasticizers
Rods
Sheets
Tubing
PLATE PLANERS
PRINTING PRESSES
PROPORTIONING PUMPS
PUG MILLS (Clay)
PULLERS (Barge Haul)
PUMPS
Centrifugal
Proportioning
Reciprocating
Single Act., 3 or
More Cyl.
Double Act, 2 or
More Cyl.
Single Act., 1 or 2 Cyl.
Double Act, 1 Cyl.
Rotary: Gear, Lobe, Vane
PUNCH PRESS
; (Gear Driven)
RECIPROCATING
Conveyors, Feeders
RECIPROCATING
COMPRESSORS
Multi Cylinder
Single Cylinder
REVERSING DIRECTION
APPLICATION
ROD MILLS
ROTARY
Pumps
Screens (Sand and Gravel)
RUBBER INDUSTRY
Intensive Internal Mixers
Batch Mixers
1.75
1.50
1.75
1.50
1.25
1.25
1.25
1.25
1.50
1.25
1.25
1.50
1.50
1.25
1.25
1.25
1.50
1.25
1.25
1.25
1.75
†
1.25
1.25
1.25
1.50
1.25
1.25
1.25
1.50
1.25
1.25
1.50
2.00
†
1.50
1.50
1.50
1.00
1.25
1.25
1.50
1.25
1.50
1.25
†
†
1.00
1.50
†
†
1.25
1.75
2.00
1.75
2.00
1.50
1.75
†
▲
1.75
2.00
†
▲
1.00
1.25
1.25
1.50
1.75
1.50
1.75
1.50
Service
3-10
10+Hrs./
Hrs./Day
Day
Application
Mixing Mill-2smooth
rolls (If corrugated rolls
are used, then use the
same service factors
that are used for a
Cracker-Warmer)
Batch Drop Mill
2 Smooth Rolls
Cracker Warmer-2
Rolls: 1 corrugated Roll
Cracker-2 corrugated
Rolls
Holding, Feed & Blend
Mill-2 Rolls
Refiner-2 Rolls
Calenders
SAND MULLERS
SCREENS
Air Washing
Rotary-Sand or Gravel
Traveling Water Intake
SCREW CONVEYORS
Uniform
Heavy Duty or Feeder
SCUM BREAKERS
(Sewage)
SEWAGE DISPOSAL
Bar Screens
Chemical Feeders
Collectors
Dewatering Screens
Scum Breakers
Slow or Rapid Mixers
Thickeners
Vacuum Filters
SHAKER CONVEYORS
SHEETERS (Rubber)
SINGLE ACTING PUMP
1 or 2 Cylinders
3 or More Cylinders
SKIP HOIST
SLAB PUSHERS
1.50
1.50
1.50
1.50
1.75
1.75
2.00
2.00
1.25
1.50
1.50
1.25
1.25
1.50
1.50
1.50
1.00
1.25
1.00
1.25
1.50
1.25
1.00
1.25
1.25
1.50
1.50
1.50
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.75
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
2.00
1.50
†
1.25
†
1.50
†
1.50
†
1.50
Application
SLITTERS (Metal)
SLUDGE COLLECTORS
(Sewage)
SOAPERS (Textile)
SPINNERS (Textile)
STEERING GEARS
STOKERS
STONE CRUSHERS
SUGAR INDUSTRY
Cane Knives, Crushers
Mill
TABLE CONVEYORS
(Non-Reversing)
Group Drives
Individual Drives
Reversing
TENTER FRAMES (Textile)
TEXTILE INDUSTRY
Batchers, calenders
Card Machines
Dry Cans, Dryers
Dyeing Machinery
Knitting Machinery
Looms, Mangles
Nappers, Pads
Range Drives
Slashers, Soapers
Spinners
Tenter Framers,
Washers, Winders
THICKNESS (Sewage)
TUMBLING BARRELS
VACUUM FILTERS
(Sewage)
VANE BLOWERS
WINCHES (Dredges)
WINDERS (Textile)
WINDGLASS
WIRE
Drawing Machines
Winding Machines
Service
3-10
10+Hrs./
Hrs./Day
Day
1.25
1.50
1.25
1.25
1.25
1.25
1.50
1.50
1.00
1.75
1.25
2.00
1.50
1.50
2.00
†
1.25
1.50
2.00
†
1.50
1.25
1.25
1.25
1.25
†
1.50
1.50
1.50
1.50
†
1.25
†
1.50
†
1.25
1.50
1.25
1.50
1.75
1.50
1.50
2.00
1.50
1.25
1.25
1.25
†
1.50
1.50
1.50
1.50
†
1.25
1.50
1.50
1.50
† Consult DODGE
▲ See Mill, Rotary
(1) Service factors for paper mill applications are applied to the nameplate rating of the electric motor at the motor rated base speed
(2) Using anti-friction bearings only. Use 1.50 for sleeve bearings
(3) When a super calender operates over a speed range of part constant horsepower and part constant torque and the constant horse
power speed range is greater than 1.5:1, use a service factor of 1.00 at base speed. When operating at constant torque over the
entire speed range or when the constant horsepower speed range is less than 1.5:1, a 1.25 service factor should be used.
Features/Benefits
Service
3-10
10+Hrs./
Hrs./Day
Day
Selection/Dimensions
Application
Specifications
Table 2: Service Factors (continued)
Nomenclature
MagnaGear
Easy Selection
EASY SELECTION
9
Features/Benefits
EASY SELECTION
Parallel - MagnaGear Reducers 1750 RPM - 1.0 Service Factor
Specifications
Nomenclature
Approx.
MagnaGear Offset Parallel Reducer Size Used with Motor Horsepower of:
Low
Nominal
Unit
Speed
Ratio
Red. 50
75
100
125
150
200
250
300
350
400
Shaft
RPM
150●
150●
150●
8.00
219
100
100
100
100✤ 100✤ 100✤ 100●
9.00
194
100
100
100
100✤ 100✤ 100✤ 100●
150●
150●
150●
10.0
175
100
100
100
100✤ 100✤ 100✤ 100●
150●
150●
150●
D
11.2
156
100
100
100
100✤ 100✤ 100●
150●
150●
150●
210●
O
12.5
140
100
100
100
100✤ 100✤ 100●
150●
150●
210●
210●
U
B
14.0
125
100
100
100
100✤ 100✤ 150✤ 150●
210✤ 210●
285●
L
16.0
109
100
100
100
100✤ 100✤ 150✤ 210✤ 210●
210●
285●
E
18.0
97
100
100
100
100✤ 150✤ 150✤ 210✤ 210●
285●
285●
20.0
88
100
100
100
100✤ 150✤ 150✤ 210✤ 285✤ 285●
285●
22.4
78
100
100
100✤ 150✤ 150✤ 210✤ 210✤ 285✤ 390●
390●
25.0
70
100
100
100✤ 150✤ 150✤ 210✤ 285✤ 285✤ 390●
390●
28.0
63
100
100
150
150✤ 210✤ 210✤ 285✤ 390✤ 390●
525●
T
31.5
56
100
100
150
150✤ 210✤ 285✤ 285✤ 390●
390●
R
35.5
49
100
100
150
210
210✤ 285✤ 390✤ 390●
I
40.0
44
100
150
150
210
210✤ 285✤ 390✤
P
45.0
39
100
150
210
210
285
390✤ 390✤
L
50.0
35
100
150
210
285
285
390✤
E
56.0
31
100
150
210
285
285
63.0
28
150
210
285
285
390
-
Easy Selection
Selection/Dimensions
MagnaGear Offset Parallel Reducer Size Used with Motor Horsepower of:
Approx.
Low
Unit
Nominal
Speed
Red. 500
Ratio
600
700
800
900
1000 1100 1200 1300 1400
Shaft
RPM
210■
285■
285■
285■
390■
390■
390■
525■
525■
8.00
219
210●
9.00
194
210●
285●
285■
285■
390■
390■
390■
525■
525■
525■
10.0
175
210●
285●
285■
390●
390■
390■
525■
525■
525■
700■
11.2
156
285●
285●
390●
390■
390■
525■
525■
525■
700■
700■
D
12.5
140
285●
285●
390●
390■
525●
525■
525■
700■
700■
700■
O
14.0
125
285●
390●
390●
525●
525●
525■
700■
700■
700■
920■
U
B
16.0
109
285●
390●
525●
525●
525■
700●
700■
700■
920■
920■
L
18.0
97
390●
525●
525●
525●
700●
700●
700■
920■
920■
920■
E
20.0
88
390●
525●
525●
700●
700●
700●
920●
920■
525●
525●
700●
700●
920●
920■
22.4
78
525●
525●
700●
700●
920●
920●
25.0
70
525●
700●
700●
920●
920●
28.0
63
525●
✤
●
■
Shaft Driven Cooling Fan Required
Electric Cooling Fan Required
Heat Exchanger Required
NOTE: Cooling systems selected for 80ºF ambient temperature and sea level altitude.
If actual installation conditions differ, use thermal ratings tables and adjustment
factors starting on page 86.
10
Approx.
MagnaGear Offset Parallel Reducer Size Used with Motor Horsepower of:
Low
Unit
Nominal
Speed
Ratio
Red. 500
600
700
800
900
1000 1100 1200 1300 1400
Shaft
RPM
285●
390●
390●
525●
525■
700●
700■
700■
700■
8.00
219
285●
9.00
194
285●
390●
390●
525●
525●
700●
700●
700■
700■
920 ■
10.0
175
285●
390●
390●
525●
525●
700●
700●
700■
920 ■ 920 ■
11.2
156
390●
390●
525●
525●
700●
700●
700■
920●
920 ■ 920 ■
D
12.5
140
390●
525●
525●
700●
700●
700●
920●
920●
920 ■
O
525●
525●
700●
700●
920●
920●
920●
14.0
125
390●
U
B
525●
700●
700●
920●
920●
16.0
109
525●
L
700●
700●
920●
920●
18.0
97
525●
E
700●
920●
920●
20.0
88
525●
700●
920●
22.4
78
525●
920●
920●
25.0
70
700●
920●
28.0
63
920●
✤
●
■
Shaft Driven Cooling Fan Required
Electric Cooling Fan Required
Heat Exchanger Required
NOTE: Cooling systems selected for 80ºF ambient temperature and sea level altitude.
If actual installation conditions differ, use thermal ratings tables and adjustment
factors starting on page 86.
11
Features/Benefits
Specifications
Nomenclature
Approx.
MagnaGear Offset Parallel Reducer Size Used with Motor Horsepower of:
Low
Nominal
Unit
Speed
Ratio
Red. 50
75
100
125
150
200
250
300
350
400
Shaft
RPM
210●
210●
8.00
219
100
100
100
100✤ 100✤ 150✤ 150✤ 150●
9.00
194
100
100
100
100✤ 100✤ 150✤ 150✤ 210✤ 210●
285✤
285✤
10.0
175
100
100
100
100✤ 100✤ 150✤ 150✤ 210✤ 210●
D
11.2
156
100
100
100
100✤ 150✤ 150✤ 210✤ 210✤ 285✤ 285●
O
12.5
140
100
100
100
100✤ 150✤ 150✤ 210✤ 285✤ 285✤ 285●
U
B
14.0
125
100
100
100
150
150✤ 210✤ 210✤ 285✤ 285✤ 390●
L
16.0
109
100
100
100
150
150✤ 210✤ 285✤ 285✤ 390✤ 390●
E
18.0
97
100
100
150
150
150✤ 210✤ 285✤ 285✤ 390✤ 525
20.0
88
100
100
150
150
210
285✤ 285✤ 390✤ 390✤ 525
22.4
78
100
100
150
150✤ 210✤ 285✤ 390✤ 390✤ 525✤ 525●
25.0
70
100
150
150
210
210✤ 285✤ 390✤ 525✤ 525✤ 525●
28.0
63
100
150
210
210
285
390✤ 390✤ 525✤ 525✤ 700
T
31.5
56
100
150
210
210
285
390✤
R
35.5
49
100
150
210
285
285
390✤
I
40.0
44
150
210
210
285
390
P
45.0
39
150
210
285
285
390
L
50.0
35
150
210
285
390
390
E
56.0
31
150
210
285
390
63.0
28
210
285
390
390
-
Easy Selection
Parallel - MagnaGear Reducers 1750 RPM - 1.5 Service Factor
Selection/Dimensions
EASY SELECTION
Features/Benefits
EASY SELECTION
Parallel - MagnaGear Reducers 1750 RPM - 2.0 Service Factor
Specifications
Nomenclature
Easy Selection
Selection/Dimensions
Approx.
Low
Nominal
Unit
Speed
Ratio
Red.
Shaft
RPM
8.00
219
9.00
194
10.0
175
D
11.2
156
O
12.5
140
U
B
14.0
125
L
16.0
109
E
18.0
97
20.0
88
22.4
78
25.0
70
28.0
63
T
31.5
56
R
35.5
49
I
40.0
44
P
45.0
39
L
50.0
35
E
56.0
31
63.0
28
MagnaGear Offset Parallel Reducer Size Used with Motor Horsepower of:
Approx.
Low
Nominal
Unit
Speed
Red.
Ratio
Shaft
RPM
8.0
219
9.0
194
10.0
175
D
11.2
156
O
12.50
140
U
14.0
125
B
16.0
109
L
18.0
97
E
20.0
88
22.4
78
25.0
70
MagnaGear Offset Parallel Reducer Size Used with Motor Horsepower of:
✤
●
■
(1)
50
75
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
210
210
210
285
100
100
100
100
100
100
100
150
150
150
150
210
210
210
210
285
285
285
390
100
125
150
200
100
100
100
100
100
150
150
150
150
210
210
210
285
285
285
390
390
-
100✤
100✤
150
150
150
150
210
210
210
210
285
285
285
390
390
390
-
150✤ 150✤
150✤ 150✤
150✤ 210✤
150✤ 210✤
150✤ 210✤
210
285
210
285✤
210
285✤
285
285✤
285
390✤
285
390✤
390
525✤ (1)
390
390
-
250
300
350
400
210✤
210✤
210✤
285✤
285✤
285✤
285✤
390✤
390✤
525✤
525✤
525✤
-
210✤
285✤
285✤
285✤
285✤
390✤
390✤
525✤
525✤
525✤
525✤
700✤
-
285✤
285✤
285✤
390✤
390✤
390✤
525✤
525✤
525✤
525✤
700✤
700✤
-
285✤
285✤
390✤
390●
390●
525✤
525✤
525✤
700✤
700✤
700✤
920✤
-
500
600
700
800
900
1000
1100
1200
1300
1400
390●
390●
390●
525●
525●
525●
700
700
700
920
920
390●
525●
525●
525●
700●
700●
700●
920●
920●
-
525●
525●
700●
700●
700●
920●
920●
920●
-
700●
700●
700●
700●
920●
920●
920●
-
700●
700●
700●
920●
920●
-
700●
700●
920●
920●
-
920●
920●
920●
-
920●
920●
920●
-
920■
920■
-
920■
-
Shaft Driven Cooling Fan Required
Electric Cooling Fan Required
Heat Exchanger Required
Double Reduction
NOTE: Cooling systems selected for 80ºF ambient temperature and sea level altitude.
If actual installation conditions differ, use thermal ratings tables and adjustment
factors starting on page 86.
12
MagnaGear Right Angle Reducer Size Used with Motor Horsepower of:
✤
●
■
75
100
125
150
200
250
300
350
400
100
100
100
100
100
100
100
100
100
100
100
100
100
100
150
100
100
100
100
100
100
100
100
100
100
150
150
150
150
210
100✤
100✤
100✤
100✤
100✤
100✤
100✤
150✤
150✤
150✤
150✤
210
210
210
210
100✤
100✤
100✤
100✤
100✤
150✤
150✤
150✤
150✤
210✤
210✤
210✤
285✤
285✤
285✤
100✤
100✤
100✤
150✤
150✤
150✤
150✤
150✤
210✤
210✤
285✤
285✤
285✤
285✤
390✤
100●
150✤
150✤
150✤
150●
210✤
210✤
210✤
285✤
285✤
285✤
390✤
390●
390●
525✤
150●
150●
150●
210✤
210●
210●
285
285
285●
390●
390●
525✤
525●
525●
525●
150●
210●
210●
210●
285●
285●
285●
390●
390●
390●
525●
525●
525●
700●
700●
210●
210●
210●
285●
285●
285●
390●
390●
525●
525●
525●
525●
700●
700●
700●
210●
210●
285●
285●
390●
390●
390●
525●
525●
525●
525●
700●
700●
920●
920●
500
600
700
800
900
1000
1100
1200
1300
1400
285●
285●
390●
390●
390●
525●
525●
525●
700●
700●
700●
920●
920●
920●
-
390●
390●
390●
525●
525●
525●
525●
700●
700●
920●
920●
920●
-
525●
525●
525●
525●
525■
525■
700●
700●
920■
920■
-
525■
525■
525■
525■
700■
700■
920●
920●
920■
-
525■
525■
525■
700■
700■
700■
920■
920■
-
525■
525■
700■
700■
700■
920■
920■
-
700■
700■
700■
700■
920■
920■
-
700■
700■
700■
920■
920■
920■
-
700■
700■
920■
920■
920■
-
700■
700■
920■
920■
-
Shaft Driven Cooling Fan Required
Electric Cooling Fan Required
Heat Exchanger Required
NOTE: Cooling systems selected for 80ºF ambient temperature and sea level altitude.
If actual installation conditions differ, use thermal ratings tables and adjustment
factors starting on page 86.
13
Features/Benefits
Approx.
Low
Nominal
Unit
Speed
Ratio
Red.
Shaft
RPM
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
T
22.4
78
R
25.0
70
I
28.0
63
P
31.5
56
L
35.5
49
E
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
50
Specifications
MagnaGear Right Angle Reducer Size Used with Motor Horsepower of:
Nomenclature
Approx.
Low
Nominal
Unit
Speed
Ratio
Red.
Shaft
RPM
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
T
22.4
78
R
25.0
70
I
28.0
63
P
31.5
56
L
35.5
49
E
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
Easy Selection
Right Angle - MagnaGear Reducers 1750 RPM - 1.0 Service Factor
Selection/Dimensions
EASY SELECTION
Features/Benefits
EASY SELECTION
Right Angle - MagnaGear Reducers 1750 RPM - 1.5 Service Factor
Specifications
Nomenclature
Approx.
Low
Nominal
Unit
Speed
Ratio
Red.
Shaft
RPM
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
T
22.4
78
R
25.0
70
I
28.0
63
P
31.5
56
L
35.5
49
E
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
Easy Selection
Selection/Dimensions
Approx.
Low
Nominal
Unit
Speed
Ratio
Red.
Shaft
RPM
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
T
22.4
78
R
25.0
70
I
28.0
63
P
31.5
56
L
35.5
49
E
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
✤
●
■
MagnaGear Right Angle Reducer Size Used with Motor Horsepower of:
50
75
100
125
150
200
250
300
350
400
100
100
100
100
100
100
100
100
100
100
100
100
100
100
150
100
100
100
100
100
100
150
150
150
150
210
210
210
285
285
100✤
100✤
100✤
150
150
150
150
150
210
210
285
285
285
285
390
100✤
150✤
150✤
150✤
150
210
210
210
210✤
285
285
285
390
390
525
150✤
150✤
150✤
150✤
210✤
210✤
210✤
285
285✤
285✤
390✤
390✤
525✤
525✤
525✤
150✤
210✤
210✤
210✤
285✤
285✤
285✤
390✤
390✤
390✤
525✤
525✤
525✤
700✤
700✤
210✤
210✤
285✤
285✤
285✤
390✤
390✤
390✤
525✤
525✤
525✤
700✤
700✤
700✤
920✤
210●
210●
285✤
285✤
390●
390●
390●
525✤
525●
525●
525●
700✤
700●
920●
920●
285●
285●
390●
390●
390●
525✤
525✤
525✤
700●
700●
700●
920●
920●
-
390●
390●
390●
525✤
525●
525●
525●
700✤
700●
920●
920●
920●
-
MagnaGear Right Angle Reducer Size Used with Motor Horsepower of:
500
600
700
800
900
1000
1100
1200
1300
1400
525●
525●
525●
525●
525●
700●
700●
920●
920●
920●
-
525●
525●
525●
700●
700●
700●
920●
920●
-
700●
700●
700●
700●
920●
920●
920●
-
700●
700●
700●
920●
920●
920●
-
700■
700■
920●
920●
-
920■
920■
920■
-
920■
920■
-
920■
920■
-
-
-
Shaft Driven Cooling Fan Required
Electric Cooling Fan Required
Heat Exchanger Required
NOTE: Cooling systems selected for 80ºF ambient temperature and sea level altitude.
If actual installation conditions differ, use thermal ratings tables and adjustment
factors starting on page 86.
14
MagnaGear Right Angle Reducer Size Used with Motor Horsepower of:
✤
●
■
75
100
125
150
200
250
300
350
400
100
100
100
100
100
100
100
150
150
150
150
210
210
210
210
100
100
100
150
150
150
150
150
210
210
285
285
285
285
390
100✤
150
150
150
150
210
210
210
285
285
285
390
390
390
525
150✤
150✤
150✤
210
210
210
285
285
285
390
390
525
525
525
525
150✤
210
210
210
285
285
285
390
390✤
390✤
525✤
525✤
525✤
700✤
700✤
210✤
210✤
285✤
285✤
390✤
390✤
390✤
525✤
525✤
525✤
525✤
700✤
700✤
920✤
920✤
285✤
285✤
390✤
390✤
390✤
525✤
525✤
525✤
700✤
700✤
700✤
920✤
920✤
920✤
-
390✤
390✤
390✤
525✤
525✤
525✤
525✤
700✤
700✤
920✤
920✤
920✤
-
525✤
525✤
525✤
525✤
525✤
525✤
700✤
700✤
920✤
920✤
-
525✤
525✤
525✤
525✤
700✤
700✤
920✤
920✤
920●
-
500
600
700
800
900
1000
1100
1200
1300
1400
525●
525●
700●
700●
700●
920●
920●
-
700●
700●
700●
920●
920●
920●
-
700●
700●
920●
920●
-
920●
920●
920●
-
-
-
-
-
-
-
Shaft Driven Cooling Fan Required
Electric Cooling Fan Required
Heat Exchanger Required
NOTE: Cooling systems selected for 80ºF ambient temperature and sea level altitude.
If actual installation conditions differ, use thermal ratings tables and adjustment
factors starting on page 86.
15
Features/Benefits
Low
Nominal Speed Unit
Shaft Red.
Ratio
RPM
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
T
22.4
78
R
25.0
70
I
28.0
63
P
31.5
56
L
35.5
49
E
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
50
Specifications
MagnaGear Right Angle Reducer Size Used with Motor Horsepower of:
Nomenclature
Approx.
Low
Nominal
Unit
Speed
Ratio
Red.
Shaft
RPM
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
T
22.4
78
R
25.0
70
I
28.0
63
P
31.5
56
L
35.5
49
E
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
Easy Selection
Right Angle - MagnaGear Reducers 1750 RPM - 2.0 Service Factor
Selection/Dimensions
EASY SELECTION
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G100 Parallel Shaft Part Numbers
Nominal Ratio
Specifications
D
O
U
B
L
E
Nomenclature
T
R
I
P
L
E
G100HP2
G100HP2
G100HP2
G100HP2
G100HP2
G100HP2
G100HP2
G100HP2
G100HP2
G100HP2
G100HP3
G100HP3
G100HP3
G100HP3
G100HP3
G100HP3
G100HP3
G100HP3
G100HP3
Solid Shaft
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
449024
449025
449026
449027
449028
449029
449030
449032
449033
449034
448979
448980
448981
448982
448983
448984
448985
448986
448987
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
449037
448998
449012
449038
449000
449013
449039
449001
449014
449040
449002
449015
449041
449003
449016
449042
449004
449017
449043
449006
449018
449044
449007
449019
449045
449008
449020
449046
449009
449021
448988
448960
448969
448989
448961
448971
448990
448962
448972
448991
448963
448973
448992
448964
448974
448993
448965
448975
448994
448966
448976
448995
448967
448977
448996
448968
448978
MagnaGear G100 Right Angle Shaft Part Numbers
Easy Selection
Nominal Ratio
Selection/Dimensions
T
R
I
P
L
E
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
G100HR3
Solid Shaft
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
448930
448931
448932
448933
448934
448935
448936
448937
448938
448939
448940
448941
448942
448943
448944
16
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
448945
448900
448915
448946
448901
448916
448947
448902
448917
448948
448903
448918
448949
448904
448919
448950
448905
448920
448951
448906
448921
448952
448907
448922
448953
448908
448923
448954
448909
448924
448955
448910
448925
448956
448911
448926
448957
448912
448927
448958
448913
448928
448959
448914
448929
MagnaGear
Shaft
Configuration
Reduction
Ratio
Part
Number
G100HP2
Parallel
Double
8 - 22.4
454007
G100HP3
Parallel
Triple
25 - 63
454006
G100HR3
Right Angle
Triple
12.5 - 63
454005
Mechanical fan kit includes fan, fan shroud, fan guard and mounting hardware.
Electric Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Voltage
Phase
Part
Number
All G100
All
All
All
230/460
3
454078
All G100
All
All
All
115
1
454079
All G100
All
All
All
230
1
452287
All G100
All
All
All
575
3
454080
Selection/Dimensions
Easy Selection
Electrical fan kit includes fan, electric motor, fan shroud, fan guard and mounting hardware.
Features/Benefits
Shaft Driven Fan Kits
Specifications
G100 Accessory Part Numbers
Nomenclature
SELECTION/DIMENSIONS
17
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G100 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
SOLID OUTPUT SHAFT
5.38
[136.65]
5.38
[136.65]
15.82
[401.70]
∅1.02 THRU
[26.01]
Specifications
8.25
[209.55]
6.06
[153.92]
5.43
[138]
6.50
[165]
7.00
[177.80]
5.38
[136.65]
5.38
6.50
[165] [136.65]
7.00
[177.80]
8.25
[209.55]
OIL SAMPLE TUBE
M16-2 TAP THRU
2.00
[50.80]
2.00
[50.80]
22.44
[569.85]
LOW SPEED
END VIEW
Nomenclature
5.38
[136.65]
5.38
[136.65]
39.90
[1013.56]
13.24
[336.22]
7.00
[177.80]
34.72
[881.76]
6.88
[174.75]
9.70
[246.38]
34.72
[881.76]
9.70
[246.38]
20.50
[520.70]
3.25
[82.49]
7.00
[177.80]
10.25
[260.35]
Easy Selection
14.89
[378.18]
7.18
[182.27]
M16-2 X 1.45 DEEP
[37]
METRIC THREAD
3.90
[98.95]
∅1.7720 ±0.0005
[∅45mm k6]
0.55
[14mm]
1.90
[48.37]
INPUT SHAFT
DETAIL
0.98
[25mm]
M24-3 X 1.97 DEEP
[50mm]
METRIC THREAD
∅3.7402 ±0.0005
[∅95mm m6]
Selection/Dimensions
Weight without oil: 1138 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
18
OUTPUT SHAFT
DETAIL
DIPSTICK/BREATHER
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G100 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
SOLID OUTPUT SHAFT
8.25
[209.55]
20.57
[522.35]
∅1.02 THRU
[26]
5.43
[138]
7.00
[177.80]
6.06
[153.92]
7.00
[177.80]
OIL SAMPLE TUBE
6.50
5.38
[165] [136.65]
6.50
5.38
[165] [136.65]
M16-2 TAP THRU
2.00
[50.80]
LOW SPEED
END VIEW
34.72
[881.76]
13.24
5.38
[136.65]
6.88
[174.75]
22.44
[569.85]
2.00
[50.80]
34.72
[881.76]
5.38 [336.22]
[136.65]
9.70
[246.38]
39.85
[1012.29]
9.70
[246.38]
3.23
[82.01]
7.00
[177.80]
2.76
[70]
DIPSTICK/BREATHER
Nomenclature
8.25
[209.55]
5.38
[136.65]
Specifications
5.38
[136.65]
20.50
[520.70]
7.00
[177.80]
14.84
[376.91]
M12-1.75 X 1.14 DEEP
[28.96]
METRIC THREAD
1.49
[37.87]
0.39
[10mm]
INPUT SHAFT
DETAIL
0.98
[25mm]
M24-3 X 1.97 DEEP
[50.00]
METRIC THREAD
∅3.7402 ±0.0005
[∅95mm m6]
OUTPUT SHAFT
DETAIL
Selection/Dimensions
∅1.3784 0.0003
[∅35mm k6]
3.90
[98.95]
Easy Selection
10.25
[260.35]
Weight without oil: 1163 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
19
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G100 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
SOLID OUTPUT SHAFT
5.38
5.38
[136.65] [136.65]
Ø 1.02THRU
[26]
Specifications
8.25
[209.55]
7.00
[177.80]
7.00
[177.80]
8.25
[209.55]
6.50
[165]
5.38
[136.65]
6.50
[165]
5.38
136.65
OIL SAMPLE TUBE
M16-2 TAP THRU
22.44
[569.85]
9.70
[246.38]
2.00
[50.80]
2.00
[50.80]
34.72
[881.76]
39.82
[1011.55]
LOW SPEED
END VIEW
Nomenclature
5.38
[136.65]
5.38
[136.65]
8.41
[213.69]
33.43
[849.07]
43.13
[1095.45]
DIPSTICK/BREATHER
9.70
[246.38]
5.58
[141.81]
6.00
[152.40]
5.43
[138]
7.00
[177.80]
6.88
[174.75]
5.00
[127]
20.50
[520.70]
7.00
[177.80]
10.25
[260.35]
Easy Selection
7.33
[186.23]
14.81
[376.15]
13.18
[334.70]
3.90
[98.95]
∅1.7720 0.0004
[45mm k6]
M16-2 X 0.94 DEEP
[23.88]
METRIC THREAD
0.98
[24.97]
∅3.7402 ±0.0000
[∅95mm m6]
0.55
[14mm]
M24-3 X 1.97 DEEP
[50mm]
METRIC THREAD
1.91
[48.45]
Selection/Dimensions
INPUT SHAFT
DETAIL
Weight without oil: 1245 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
20
OUTPUT SHAFT
DETAIL
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G100 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
HOLLOW OUTPUT SHAFT
5.38
[136.65]
15.82
[401.70]
5.38
[136.65]
∅1.02 THRU
[26.01]
7.00
[177.80]
8.25
[209.55]
Specifications
7.00
[177.80]
8.25
[209.55]
OIL SAMPLE TUBE
6.50
5.38
[165] [136.65]
5.38
6.50
[165] [136.65]
M16-2 TAP THRU
22.44
[569.85]
23.74
[602.87]
2.00
[50.80]
LOW SPEED
END VIEW
5.38
[136.65]
34.72
[881.76]
39.85
[1012.31]
5.38
[136.65]
6.88
[174.75]
9.70
[246.38]
DIPSTICK/BREATHER
9.70
[246.38]
3.82
[97.02]
7.00
[177.80]
3.27
[83]
20.50
[520.70]
6.50
[165.10]
7.00
[177.80]
Nomenclature
2.00
[50.80]
10.25
[260.35]
9.115
[231.52]
9.115
[231.52]
14.84
[376.91]
M16-2 X 1.45 DEEP
[37]
METRIC THREAD
0.55
[14mm]
“B”
∅1.7720 ± 0.0005
[∅45mm k6]
INPUT SHFT
DETAIL
Easy Selection
“A”
1.90
[48.37]
Selection/Dimensions
OUTPUT HUB DETAIL
SEE PAGE 24
Weight without oil: 1103 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
21
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G100 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
HOLLOW OUTPUT SHAFT
5.38
[136.65]
5.38
[136.65]
20.57
[522.35]
∅1.02 THRU
[26]
Specifications
8.25
[209.55]
7.00
[177.80]
7.00
[177.80]
8.25
[209.55]
OIL SAMPLE TUBE
6.50
[165] 5.38
[136.65]
6.50
[165]
5.38
[136.65]
M16-2 TAP THRU
22.44
[569.85]
2.00
[50.80]
2.00
[50.80]
23.74
[602.87]
LOW SPEED
END VIEW
6.88
[174.75]
9.70
[246.38]
34.72
[881.76]
39.85
[1012.31]
Nomenclature
5.38
[136.65]
34.72
[881.76
5.38
[136.65]
9.67
[245.61]
3.24
[82.40]
7.00
[177.80]
2.76
[70]
∅6.50
[165.10]
7.00
[177.80]
20.50
[520.70]
10.25
[260.35]
Easy Selection
14.81
[376.15]
9.115
[231.52]
9.115
[231.52]
"A"
1.49
[37.87]
M12-1.75 X 1.14 DEEP
[28.96]
METRIC THREAD
0.39
[10mm]
“B”
∅1.3784 ±0.0003
[∅35mm k6]
Selection/Dimensions
INPUT SHAFT
DETAIL
OUTPUT HUB DETAIL
SEE PAGE 24
Weight without oil: 1127 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
22
DIPSTICK/BREATHER
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G100 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
HOLLOW OUTPUT SHAFT
5.38
[136.65]
∅1.024
[26.01]
8.25
[209.55]
7.00
[177.80]
8.25
[209.55]
7.00
[177.80]
OIL SAMPLE TUBE
6.50
5.38
[165] [136.65]
Specifications
5.38
[136.65]
6.50
5.38
[165] [136.65]
M16-2 TAP THRU
22.44
[569.85]
2.00
[50.80]
LOW SPEED
END VIEW
39.82
[1011.55]
43.13
[1095.45]
5.38
[136.65]
6.88
[174.75]
9.70
[246.38]
34.72
[881.76]
5.38
[136.65]
33.43
[849.07]
8.41
[213.69]
DIPSTICK/BREATHER
9.70
[246.38]
Nomenclature
2.00
[50.80]
5.58
[141.81]
5.00
[127]
∅6.47
[164.34]
7.00
[177.80]
20.50
[520.70]
10.25
[260.35]
9.19
[233.48]
14.81
[376.17]
9.14
[232.11]
Easy Selection
7.00
[177.80]
1.908 ±0.0005
[48.45 ±0.13]
0.55
[14mm]
∅1.7720 ±0.0004
[∅45mm k6]
“A”
OUTPUT HUB
DETAIL
SEE PAGE 24
Weight without oil: 1210 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
23
Selection/Dimensions
M16-2 X 0.94 DEEP
[23.88]
METRIC THREAD
“B”
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G100 Hollow Bore Twin Tapered Bushing Information
Bore Dia.
Twin Tapered Bushing
Kit Part Number
“A”
“B”
3-7/16”
454062
2.943”
7/8”
3-3/16”
454063
2.768”
3/4”
3”
454064
2.577”
3/4”
2-15/16”
454065
2.514”
3/4”
Specifications
2-7/8”
454066
2.450”
3/4”
2-11/16”
454067
2.338”
5/8”
2-1/2”
454068
2.148”
5/8”
2-7/16”
454069
2.443”
5/8”
2-3/8”
454070
2.021”
5/8”
2-1/4”
454071
1.972”
1/2”
2-3/16”
454072
1.909”
1/2”
Nomenclature
90mm
454078
81mm
25mm
85mm
454073
76mm
22mm
80mm
454074
71mm
22mm
75mm
454075
67.5mm
20mm
70mm
454079
62.5mm
20mm
65mm
454076
58mm
20mm
60mm
454077
53mm
18mm
Easy Selection
Selection/Dimensions
24
D
O
U
B
L
E
T
R
I
P
L
E
G150HP2
G150HP2
G150HP2
G150HP2
G150HP2
G150HP2
G150HP2
G150HP2
G150HP2
G150HP2
G150HP3
G150HP3
G150HP3
G150HP3
G150HP3
G150HP3
G150HP3
G150HP3
G150HP3
Solid Shaft
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
449170
449171
449172
449173
449174
449175
449176
449177
449178
449179
449126
449127
449128
449129
449130
449131
449132
449133
449134
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
449182
449146
449158
449183
449147
449159
449184
449148
449160
449185
449149
449161
449186
449150
449162
449187
449151
449163
449188
449152
449164
449189
449153
449165
449190
449154
449166
449191
449155
449167
449135
449107
449117
449136
449108
449118
449137
449110
449119
449138
449111
449120
449139
449112
449121
449140
449113
449122
449141
449114
449123
449142
449115
449124
449143
449116
449125
Features/Benefits
Nominal Ratio
Specifications
MagnaGear G150 Parallel Shaft Part Numbers
Nomenclature
SELECTION/DIMENSIONS
T
R
I
P
L
E
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
G150HR3
Solid Shaft
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
449077
449078
449079
449080
449081
449082
449083
449084
449085
449086
449087
449088
449089
449090
449091
25
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
449092
449047
449062
449093
449048
449063
449094
449049
449064
449095
449050
449065
449096
449051
449066
449097
449052
449067
449098
449053
449068
449099
449054
449069
449100
449055
449070
449101
449056
449071
449102
449057
449072
449103
449058
449073
449104
449059
449074
449105
449060
449075
449106
449061
449076
Selection/Dimensions
Nominal Ratio
Easy Selection
MagnaGear G150 Right Angle Shaft Part Numbers
Features/Benefits
SELECTION/DIMENSIONS
G150 Accessory Part Numbers
Shaft Driven Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Part
Number
G150HP2
Parallel
Double
8 - 22.4
451010
G150HP3
Parallel
Triple
25 - 63
454009
G150HR3
Right Angle
Triple
12.5 - 63
454008
Specifications
Mechanical fan kit includes fan, fan shroud, fan guard and mounting hardware.
Electric Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Voltage
Phase
Part
Number
All G150
All
All
All
230/460
3
454047
All G150
All
All
All
115
1
454048
Nomenclature
All G150
All
All
All
230
1
453933
All G150
All
All
All
575
3
454049
Electrical fan kit includes fan, electric motor, fan shroud, fan guard and mounting hardware.
Easy Selection
Selection/Dimensions
26
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G150 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
SOLID OUTPUT SHAFT
17.77
[451.36]
5.62
[142.75]
∅1.02 THRU
[26]
8.50
[215.90]
8.50
[215.90]
9.00
[228.60]
7.09
[180.09]
Specifications
9.00
[228.60]
OIL SAMPLE TUBE
5.62
[142.75]
5.62
[142.75]
7.09
[180.09]
7.25
[184.15]
10.81
[274.57]
24.27
[616.46]
2.00
[50.80]
2.00
[50.80]
38.64
[981.46]
LOW SPEED
END VIEW
43.81
[1112.87]
DIPSTICK/BREATHER
5.62
5.62
[142.75] [142.75]
5.14
[130.66]
8.50
[215.90]
Nomenclature
5.62
[142.75]
6.43
[163.33]
4.94
[125.41]
5.63
[142.88]
8.50
[215.90]
11.50
[292.10]
15.98
[405.99]
13.20
[335.15]
Easy Selection
23.00
[584.20]
14.28
[362.78]
4.57
[116.00]
2.11
[53.5mm]
0.55
[14mm]
∅1.9685 ±0.0004
[∅50mm m6]
INPUT SHAFT
DETAIL
1.10
[28mm]
∅4.3307 ±0.0005
[∅110mm m6]
OUTPUT SHAFT
DETAIL
Weight without oil: 1619 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
27
Selection/Dimensions
M24-3 X 2.05 [52] DEEP
METRIC THREAD
M16-2 X 1.14 [29] DEEP
METRIC THREAD
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G150 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
SOLID OUTPUT SHAFT
23.27
[591.06]
5.62
5.62
[142.75] [142.75]
∅1.02 THRU
[26mm]
Specifications
8.50
[215.90]
9.00
[228.60]
8.50
[215.90]
9.00
[228.60]
7.09
[180.09]
OIL SAMPLE TUBE
5.62
[142.75]
5.62
7.09
[180.09] [142.75]
7.25
[184.15]
24.27
[616.46]
2.00
[50.80]
38.64
[981.46]
2.00
[50.80]
Nomenclature
LOW SPEED
END VIEW
38.64
[981.46]
5.62
5.62
[142.75] [142.75]
5.14
[130.66]
10.81
[274.57]
43.81
[1112.87]
DIPSTICK/BREATHER
10.81
[274.57]
6.43
[163.33]
5.63
[142.88]
4.60
8.50
[215.90] [116.84]
∅7.48
[189.99]
23.00
[584.20]
Easy Selection
8.50
[215.90]
11.50
[292.10]
12.85
[326.31]
14.28
[362.78]
15.98
[405.99]
11.48
[291.59]
OPTIONAL
BACKSTOP
M16-2 X 1.14 DEEP
METRIC THREAD
Selection/Dimensions
∅1.7715 ±0.0004
[∅45mm k6]
4.57
[116.00]
1.91
[48.50]
INPUT SHAFT
DETAIL
M24-3 X 2.05 DEEP
METRIC THREAD
0.5510 0.0008
[14mm]
1.1023 ±0.0012
[28mm]
∅4.3307 ±0.0005
[∅110mm m6]
OUTPUT SHAFT
DETAIL
Weight without oil: 1655 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
28
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G150 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
SOLID OUTPUT SHAFT
∅1.02 THRU
[26mm]
5.62
[142.75]
5.62
7.09
[180.09] [142.75]
9.00
[228.60]
8.50
[215.90]
7.25
[184.15]
24.27
[616.46]
2.00
[50.80]
38.64
[981.46]
2.00
[50.80]
47.80
[1213.99]
5.62
5.62
[142.75] [142.75]
9.16
[232.54]
6.48
[164.58]
10.81
[274.57]
43.81
[1112.87]
DIPSTICK/BREATHER
36.99
[939.42]
10.81
[274.57]
5.42
[137.54]
5.63
[142.88]
8.50
[215.90]
Specifications
7.09
[180.09]
8.50
[215.90]
9.00
[228.60]
OIL SAMPLE TUBE
Nomenclature
5.62
5.62
[142.75] [142.75]
4.75
[120.65]
∅7.48
23.00
[584.20]
8.50
[215.90]
11.48
[291.59]
OPTIONAL
BACKSTOP
14.16
[359.73]
15.98
[405.99]
4.57
[116.00]
2.11
[53.50]
M16-2 X 1.14 DEEP
METRIC THREAD
∅1.9685 ±0.0004
[∅50mm m6]
INPUT SHAFT
DETAIL
M24-3 X 2.05 DEEP
METRIC THREAD
0.5510 ±0.0008
[14mm]
1.1023 ±0.0012
[28mm]
∅4.3307 ±0.0005
[∅110mm m6]
OUTPUT SHAFT
DETAIL
Weight without oil: 1714 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
29
Selection/Dimensions
7.93
[201.35]
Easy Selection
11.50
[292.10]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G150 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
HOLLOW OUTPUT SHAFT
17.77
[451.36]
5.62
5.62
[142.75] [142.75]
∅1.02 THRU
[26]
Specifications
9.00
[228.60]
8.50
[215.90]
9.00
[228.60]
8.50
[215.90]
OIL SAMPLE TUBE
7.09
5.62
[180.09] [142.75]
5.62
7.09
[142.75]
[180.09]
24.27
[616.46]
2.00
[50.80]
2.00
[50.80]
38.64
[981.46]
Nomenclature
LOW SPEED
END VIEW
7.25
[184.15]
10.81
[274.57]
43.81
[1112.87]
DIPSTICK/BREATHER
5.62
5.62
[142.75] [142.75]
8.50
[215.90]
5.37
[136.47]
4.94
[125.41]
∅8.00
[203.20]
Easy Selection
8.50
[215.90]
23.00
[584.20]
11.50
[292.10]
9.98
[253.59]
13.20
[335.15]
9.98
[253.59]
15.98
[405.99]
2.11
[53.50mm]
M16-2 X 1.14 [29] DEEP
METRIC THREAD
Selection/Dimensions
∅1.9685 0.0004
[∅50mm m6]
“A”
“B”
0.55
[14mm]
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 33
Weight without oil: 1556 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
30
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G150 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
HOLLOW OUTPUT SHAFT
23.27
[591.06]
5.62
[142,75
∅1.02 THRU
[26mm]
8.50
[215.90]
8.50
[215.90]
9.00
[228.60]
7.09
[180.09]
Specifications
9.00
[228.60]
OIL SAMPLE TUBE
5.62
[142.75]
5.62
[142.75]
7.09
[180.09]
24.27
[616.46]
2.00
[50.80]
2.00
[50.80]
38.64
[981.46]
LOW SPEED
END VIEW
7.25
[184.15]
10.81
[274.57]
43.81
[1112.87]
38.64
[981.46]
DIPSTICK/BREATHER
10.81
[274.57]
5.62
5.62
[142.75] [142.75]
5.14
[130.66]
4.60
8.50
[116.84]
[215.90]
Nomenclature
5.62
[142,75
23.00
∅7.48
∅8.00 [584.20]
[189.99] [203.20]
8.50
[215.90]
9.98
[253.59]
15.98
[405.99]
11.48
[291.60]
OPTIONAL
BACKSTOP
M16-2 X 1.14 DEEP
METRIC THREAD
∅1.7715 ±0.0004
[∅45mm k6]
"A"
1.91
[48.50]
“B”
0.5510 ±0.0008
[14mm]
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 33
Weight without oil: 1593 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
31
Selection/Dimensions
9.98
[253.59]
Easy Selection
11.50
[292.10]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G150 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
HOLLOW OUTPUT SHAFT
5.62
5.62
[142.75] [142.75]
OIL SAMPLE TUBE
Ø 1.02 THRU
[26mm]
Specifications
8.50
[215.90]
9.00
[228.60]
7.09
5.62
[180.09] [142.75]
7.09
5.62
[180.09] [142.75]
9.00
[228.60]
8.50
[215.90]
2.00
[50.80]
24.27
[616.46]
2.00
[50.80]
38.64
[981.46]
43.81
[1112.87]
LOW SPEED
END VIEW
Nomenclature
5.62
[142.75]
DIPSTICK BREATHER
47.80
[1213.99]
36.99
[939.42]
5.62
[142.75]
7.25
[184.15]
10.81
[274.57]
10.81
[274.57]
5.42
[137.54]
4.75
[120.65]
8.50
[215.90]
23.00
Ø 7.48 Ø 8.00 [584.20]
[189.99] [203.20]
8.50
[215.90]
11.50
[292.10]
Easy Selection
9.98
[253.59]
9.98
[253.59]
11.48
[291.59]
15.98
[405.99]
OPTIONAL
BACKSTOP
M16-2 X 1.14 DEEP
METRIC THREAD
"A"
2.11
[53.50]
"B"
Ø1.9685±0.0004
[Ø50mm m6]
0.5510 ±0.0008
[14mm]
Selection/Dimensions
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 33
Weight without oil: 1651 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
32
Twin Tapered Bushing
Kit Part Number
“A”
“B”
4-7/16”
454081
3.880”
1”
4-3/16”
454082
3.627”
1”
3-15/16”
454083
3.373”
1”
3-7/16”
454084
2.943”
7/8”
3-3/16”
454085
2.768”
3/4”
3”
454086
2.577”
3/4”
2-15/16”
454087
2.514”
3/4”
120mm
454088
109mm
32mm
110mm
454089
100mm
28mm
100mm
454090
90mm
28mm
95mm
454091
86mm
25mm
90mm
454092
81mm
25mm
85mm
454093
76mm
22mm
454094
71mm
22mm
454095
67.5mm
20mm
Selection/Dimensions
Easy Selection
80mm
75mm
Features/Benefits
Bore Dia.
Specifications
MagnaGear G150 Hollow Bore Twin Tapered Bushing Information
Nomenclature
SELECTION/DIMENSIONS
33
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G210 Parallel Shaft Part Numbers
Nominal Ratio
Specifications
D
O
U
B
L
E
Nomenclature
T
R
I
P
L
E
G210HP2
G210HP2
G210HP2
G210HP2
G210HP2
G210HP2
G210HP2
G210HP2
G210HP2
G210HP2
G210HP3
G210HP3
G210HP3
G210HP3
G210HP3
G210HP3
G210HP3
G210HP3
G210HP3
Solid Shaft
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
449317
449318
449319
449320
449321
449322
449323
449324
449325
449326
449272
449273
449274
449275
449276
449277
449278
449279
449280
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
449329
449292
449305
449330
449293
449306
449331
449294
449307
449332
449295
449308
449333
449296
449309
449334
449297
449310
449335
449298
449311
449336
449299
449312
449337
449300
449313
449338
449301
449314
449281
449253
449262
449282
449254
449263
449283
449255
449264
449284
449256
449265
449285
449257
449267
449286
449258
449268
449287
449259
449269
449288
449260
449270
449289
449261
449271
MagnaGear G210 Right Angle Shaft Part Numbers
Nominal Ratio
Easy Selection
Selection/Dimensions
T
R
I
P
L
E
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
G210HR3
Solid Shaft
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
449222
449223
449224
449225
449226
449227
449228
449229
449230
449231
449232
449233
449234
449235
449236
34
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
449237
449192
449207
449238
449193
449208
449240
449194
449209
449241
449195
449210
449242
449196
449211
449243
449197
449212
449244
449198
449213
449245
449199
449214
449246
449200
449215
449247
449201
449216
449248
449202
449217
449249
449203
449218
449250
449204
449219
449251
449205
449220
449252
449206
449221
MagnaGear
Shaft
Configuration
Reduction
Ratio
Part
Number
G210HP2
Parallel
Double
8 - 22.4
454013
G210HP3
Parallel
Triple
25 - 63
454012
G210HR3
Right Angle
Triple
12.5 - 63
454011
Mechanical fan kit includes fan, fan shroud, fan guard and mounting hardware.
Electric Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Voltage
Phase
Part
Number
All G210
All
All
All
230/460
3
454044
All G210
All
All
All
115
1
454045
All G210
All
All
All
230
1
454033
All G210
All
All
All
575
3
454046
Selection/Dimensions
Easy Selection
Electrical fan kit includes fan, electric motor, fan shroud, fan guard and mounting hardware.
Features/Benefits
Shaft Driven Fan Kits
Specifications
G210 Accessory Part Numbers
Nomenclature
SELECTION/DIMENSIONS
35
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G210 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
SOLID OUTPUT SHAFT
20.31
[515.87]
2.00
[50.80]
2.00
[50.80]
∅1.02
[26]
Specifications
10.25
[260.35]
9.25
[234.95]
9.25
[234.95]
10.25
[260.35]
7.50
[190.50]
OIL SAMPLE TUBE
5.75
[146.05]
5.75
7.50
[146.05]
[190.50]
15.35
[389.90]
28.00
[711.20]
5.75
5.75
[146.05] [146.05]
8.00
[203.20]
LOW SPEED
END VIEW
Nomenclature
44.50
[1130.30]
12.31
[312.67]
5.75
5.75
[146.05] [146.05]
7.00
[177.80]
5.98
[151.88]
9.25
[234.95]
5.43
[138]
25.50
[647.70]
6.00
[152.40]
9.25
[234.95]
12.75
[323.85]
Easy Selection
17.59
[446.76]
15.35
[389.90]
14.05
[356.84]
49.78
[1264.39]
5.00
[127.00mm]
2.32
M16-2 X 1.14 [29] DEEP
METRIC THREAD
[59.00mm]
M24-3 X 2.05 [52] DEEP
METRIC THREAD
Selection/Dimensions
∅2.1662 ±0.0004
[∅55mm m6]
0.63
[16mm]
INPUT SHAFT
DETAIL
1.26
[32mm]
∅4.7244 ±0.0005
[∅120mm m6]
OUTPUT SHAFT
DETAIL
Weight without oil: 2134 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
36
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G210 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
SOLID OUTPUT SHAFT
26.62
[676.15]
5.75
[146.05]
∅1.02
[26.01]
10.25
[260.35]
9.25
[234.95]
10.25
[260.35]
9.25
[234.95]
7.50
[190.50]
OIL SAMPLE TUBE
5.75
[146.05]
9.50
[241.30]
5.75
7.50
[146.05]
[190.50]
M16-2 THRU
28.00
[711.20]
29.50
[749.30]
2.00
[50.80]
Specifications
5.75
[146.05]
2.00
[50.80]
8.00
[203.20]
2.31
[312.67]
44.50
[1130.30]
49.78
[1264.39]
5.14
[130.57]
9.25
[234.95]
Nomenclature
LOW SPEED
END VIEW
5.75
5.75
[146.05] [146.05]
7.00
[177.80]
4.60
[116.84]
6.00
[152.40]
12.75
[323.85]
8.34
[211.84]
17.59
[446.76]
15.35
[389.90]
13.26
[336.89]
Easy Selection
25.50
[647.70]
9.25
[234.95]
5.00
[127.00mm]
1.90
[48.40mm]
∅1.7721 ±0.0003
[∅45mm k6]
INPUT SHAFT
DETAIL
M24-3 X 2.05 [52] DEEP
METRIC THREAD
0.55
[14mm]
1.26
[32mm]
∅4.7244 ± 0.0005
[∅120mm m6]
OUTPUT SHAFT
DETAIL
Weight without oil: 2187 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
37
Selection/Dimensions
M16-2 X 1.14 [29] DEEP
METRIC THREAD
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G210 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
SOLID OUTPUT SHAFT
5.75
5.75
[146.05] [146.05]
∅1.024
[26.01]
Specifications
7.50
[190.50]
10.25
[260.35]
9.25
[234.95]
5.75
[146.05]
5.75
7.50
[190.50] [146.05]
9.25
[234.95]
10.25
[260.35]
2.00
[50.80]
OIL SAMPLE TUBE
8.00
[203.20]
28.00
[711.20]
44.50
[1130.30]
2.00
[50.80]
49.78
[1264.39]
LOW SPEED
END VIEW
Nomenclature
41.60
[1056.74]
9.41
[239.12]
5.75
5.75
[146.05] [146.05]
7.00
[177.80]
9.25
[234.95]
53.91
[1389.42]
12.31
[312.67]
5.94
[150.87]
5.43
[138]
6.00
[152.40]
25.50
[647.70]
9.25
[234.95]
12.75
[323.85]
Easy Selection
8.34
[211.84]
17.59
[446.76]
15.41
[391.43]
2.32
[59mm]
M24-3 X 2.05 [52] DEEP
METRIC THREAD
M16-2 X 1.14 DEEP
METRIC THREAD
∅2.1662 ±0.0004
[∅55mm m6]
0.63 ±0.00
5.00
[127.00mm]
∅4.7244 ±0.0005
[∅120mm m6]
Selection/Dimensions
INPUT SHAFT
DETAIL
1.26 ±0.00
[32mm]
OUTPUT SHAFT
DETAIL
Weight without oil: 2253 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
38
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G210 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
HOLLOW OUTPUT SHAFT
20.31
[515.87]
5.75
5.75
[146,05] [146,05]
∅1.02
[26]
9.25
[234.95]
7.50
[190.50]
Specifications
10.25
[260.35]
OIL SAMPLE TUBE
5.75
[146.05]
7.50
5.75
[190.50] [146.05]
9.25
[234.95]
28.00
[711.20]
44.50
[1130.30]
2.00
[50.80]
2.00
[50.80]
LOW SPEED
END VIEW
8.00
[203.20]
49.78
[1264.39]
DIPSTICK BREATHER
5.91
[150.16]
9.25
[234.95]
5.75
5.75
[146.05] [146.05]
Nomenclature
10.25
[260.35]
5.43
[138]
9.25
[234.95]
12.75
[323.85]
10.88
[276.35]
14.05
[356.77]
M16-2 X 1.14 [29] DEEP
METRIC THREAD
17.59
[446.76]
“A”
2.32
[59.00mm]
“B”
∅2.1662 ±0.0004
[55mm m6]
0.63
[16mm]
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 42
Weight without oil: 2057 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
39
Selection/Dimensions
10.88
[276.35]
Easy Selection
25.50
[647.70]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G210 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
HOLLOW OUTPUT SHAFT
26.62
[676.15]
5.75
5.75
[146.05] [146.05]
∅1.024
[26.01]
Specifications
10.25
[260.35]
9.25
[234.95]
9.25
[234.95]
10.25
[260.35]
7.50
[190.50]
OIL SAMPLE TUBE
5.75
[146.05]
9.50
[241.30]
5.75
7.50
[190.50] [146.05]
M16-2 THRU
28.00
[711.20]
2.00
[50.80]
2.00
[50.80]
29.50
[749.30]
8.00
[203.20]
44.50
[1130.30]
12.31
[312.67]
49.78
[1264.39]
LOW SPEED
END VIEW
Nomenclature
DIPSTICK/BREATHER
5.75
5.75
[146.05] [146.05]
5.14
[130.57]
9.25
[234.95]
4.60
[116.84]
∅9.25
[234.95]
25.50
[647.70]
12.75
[323.85]
9.25
[234.95]
Easy Selection
10.88
[276.35]
10.88
[276.35]
17.59
[446.76]
13.26
[336.89]
“A”
1.90
[48.40mm]
M16-2 X 1.14 [29] DEEP
METRIC THREAD
“B”
∅1.7717 ±0.0003
[∅45mm k6]
0.55
[14mm]
Selection/Dimensions
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 42
Weight without oil: 2111 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
40
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G210 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 to 63:1)
HOLLOW OUTPUT SHAFT
5.75
5.75
[146.05] [146.05]
∅1.024
[26.01]
7.50
[190.50]
5.75
[146.05]
Specifications
9.25
[234.95]
10.25
[260.35]
OIL SAMPLE TUBE
5.75
7.50
[190.50] [146.05]
10.25
[260.35]
9.25
[234.95]
8.00
[203.20]
12.31
[312.67]
28.00
[711.20]
2.00
[50.80]
44.50
[1130.30]
2.00
[50.80]
LOW SPEED
END VIEW
DIPSTICK/BREATHER
41.60
[1056.74]
9.41
[239.12]
25.50
[647.70]
9.25
[234.95]
Nomenclature
53.91
[1369.42]
5.75
5.75
[146.05] [146.05]
49.78
[1264.39]
5.94
[150.87]
5.43
[138]
9.25]
[234.95]
9.25
[234.95]
10.88
[276.35]
10.88
[276.35]
17.59
[446.76]
Easy Selection
12.75
[323.85]
“A”
2.32
[59.00mm]
M16-2 X 1.14 DEEP
METRIC THREAD
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 42
Weight without oil: 2175 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
41
Selection/Dimensions
∅2.1662 ±0.0004
[∅55mm m6]
“B”
0.63 ±0.00
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G210 Hollow Bore Twin Tapered Bushing Information
Specifications
Bore Dia.
Twin Tapered Bushing
Kit Part Number
“A”
“B”
4-15/16”
454099
4.232”
1-1/4”
4-7/16”
454100
3.880”
1”
4-3/16”
454101
3.627”
1”
3-15/16”
454102
3.373”
1”
3-7/16”
454103
2.943”
7/8”
130mm
454104
118mm
40mm
125mm
454105
114mm
32mm
120mm
454106
109mm
32mm
110mm
454107
100mm
28mm
100mm
454108
90mm
28mm
95mm
454109
86mm
25mm
90mm
454110
81mm
25mm
Nomenclature
Easy Selection
Selection/Dimensions
42
D
O
U
B
L
E
T
R
I
P
L
E
G285HP2
G285HP2
G285HP2
G285HP2
G285HP2
G285HP2
G285HP2
G285HP2
G285HP2
G285HP2
G285HP3
G285HP3
G285HP3
G285HP3
G285HP3
G285HP3
G285HP3
G285HP3
G285HP3
Solid Shaft
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
449461
449462
449463
449464
449465
449466
449467
449468
449469
449470
449417
449418
449419
449420
449421
449422
449423
449424
449425
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
449473
449437
449449
449474
449438
449450
449475
449439
449451
449476
449440
449452
449477
449441
449453
449478
449442
449454
449479
449443
449455
449480
449444
449456
449481
449445
449457
449482
449446
449458
449426
449399
449408
449427
449400
449409
449428
449401
449410
449429
449402
449411
449430
449403
449412
449431
449404
449413
449432
449405
449414
449433
449406
449415
449434
449407
449416
Features/Benefits
Nominal Ratio
Specifications
MagnaGear G285 Parallel Shaft Part Numbers
Nomenclature
SELECTION/DIMENSIONS
T
R
I
P
L
E
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
G285HR3
Solid Shaft
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
449339
449340
449341
449342
449343
449344
449345
449346
449347
449348
449349
449350
449351
449352
449353
43
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
449384
449369
449354
449385
449370
449355
449386
449371
449356
449387
449372
449357
449388
449373
449358
449389
449374
449359
449390
449375
449360
449391
449376
449361
449392
449377
449362
449393
449378
449363
449394
449379
449364
449395
449380
449365
449396
449381
449366
449397
449382
449367
449398
449383
449368
Selection/Dimensions
Nominal Ratio
Easy Selection
MagnaGear G285 Right Angle Shaft Part Numbers
Features/Benefits
SELECTION/DIMENSIONS
G285 Accessory Part Numbers
Shaft Driven Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Part
Number
G210HP2
Parallel
Double
8 - 22.4
454015
G210HP3
Parallel
Triple
25 - 63
454014
G210HR3
Right Angle
Triple
12.5 - 63
451526
Specifications
Mechanical fan kit includes fan, fan shroud, fan guard and mounting hardware.
Electric Fan Kits
Nomenclature
MagnaGear
Shaft
Configuration
Reduction
Ratio
Voltage
Phase
Part
Number
All G285
All
All
All
230/460
3
454023
All G285
All
All
All
115
1
454024
All G285
All
All
All
230
1
454198
All G285
All
All
All
575
3
454025
Electrical fan kit includes fan, electric motor, fan shroud, fan guard and mounting hardware.
Easy Selection
Selection/Dimensions
44
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G285 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
SOLID OUTPUT SHAFT
22.20
[563,88]
∅1.30
[33,02]
∅1.30
[33,00]
10.00
[254,00]
11.31
[287,27]
10.00
[254,00]
11.31
[287,27]
DIPSTICK BREATHER
Specifications
6.50
6.50
[165,10] [165,10]
8.00
6.50
[203,20] [165,10]
6.50
8.00
[165,10]
[203,20]
30.06
[763,52]
3.00
[76,20]
3.00
[76,20]
4.99
[126,72]
Nomenclature
6.50
[165,10]
6.55
[166,37]
10.00
[254,00]
13.10
[332,74]
47.63
[1209,80]
LOW SPEED
END VIEW
6.50
[165,10]
8.63
[219,20]
7.38
[187,45]
6.50
[165,10]
5.92
[150,37]
27.76
[705,10]
∅9.00
[228,60]
15.35
[389,81]
M12-1.75 X 1.00” DEEP
METRIC THREAD
13.26
[336,80]
OPTIONAL
BACKSTOP
16.30
[414,04]
2.56
[65,13]
0.7086 ±0.0008
[18mm]
1.2586 ±0.0012
[32mm]
Easy Selection
13.88
[352,55]
5.39
[136,90]
∅2.3630 ±0.0004
[∅60mm m6]
INPUT SHAFT
DETAIL
M24-3.00 X 1.97 DEEP
METRIC THREAD
∅5.1192 ±0.0005
[∅130mm m6]
OUTPUT SHAFT
DETAIL
Weight without oil: 2379 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
45
Selection/Dimensions
10.00
[254,00]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G285 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
SOLID OUTPUT SHAFT
6.50
[165,10]
6.50
[165,10]
29.20
[741,68]
∅1.30
[33,00]
Specifications
11.31
[287,27]
∅1.30
[33,02]
8.00
[203,20]
10.00
[254,00]
11.31
[287,27]
DIPSTICK BREATHER
6.50
[165,10]
6.50
8.00 [165,10]
[203,20]
10.00
[254,00]
8.63
[219,20]
30.06
[763,52]
3.00
[76,20]
LOW SPEED
END VIEW
13.10
[332,74]
3.00
[76,20]
Nomenclature
6.50
[165,10]
47.63
[120,80]
6.50
[165,10]
7.38
[187,36]
5.41
[137,41]
10.00
[254,00]
4.72
[119,89]
6.50
[165,10]
27.76
[705,10]
13.88
[352,55]
10.00
[254,00]
Easy Selection
14.14
[359,04]
13.26
[336,80]
OPTIONAL
BACKSTOP
16.3
[413,9]
5.39
[136,90]
M12-1,75 X 1.00” DEEP
METRIC THREAD
1.2586 ±0.0012
[32mm]
2.10
[53,37]
0.5512 ±0.0008
[14mm]
Selection/Dimensions
∅1.9689 ±0.0004
[∅50mm m6]
INPUT SHAFT
DETAIL
M24-3.00 X 1.97” DEEP
METRIC THREAD
Weight without oil: 2450 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
46
OUTPUT SHAFT
DETAIL
∅5.1192 ±0.0005
[∅130mm m6]
4.99
[126,72]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G285 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
SOLID OUTPUT SHAFT
6.50
[165,10]
∅1.30
[33,00]
11.31
[287,27]
∅1.299 THRU
[32,995]
16.00
[406,40]
10.00
[254,00]
DIPSTICK BREATHER
6.50
[165,10]
Specifications
6.50
[165,10]
6.50
[165,10]
10.00
[254,00]
11.31
[287,27]
30.06
[763.52]
3.00
[76,20]
3.00
[76,20]
47.63
[1209,80]
8.63
[219,20]
13.10
[332,74]
4.99
[126,72]
LOW SPEED
END VIEW
6.50
[165,10]
7.38
[187,45]
USABLE
SHAFT
LENGTH
6.50
[165,10]
KEY
LENGTH
10.00
[254,00]
10.10
[256,59]
27.76
[705,10]
44.63
[1133,65]
13.10
[332,74]
6.55
[166,37]
5.92
[150,37]
Nomenclature
57.73
[1466,39]
6.50
[165,10]
∅9.00
[228,60]
10.00
[254,00]
13.88
[352,55]
Easy Selection
13.26
[336,80]
OPTIONAL
BACKSTOP
16.30
[413,94]
2.52
[63,88]
5.39
[136,90]
0.7086 ±0.0008
[18mm]
∅2.3630 ±.0004
[∅60mm m6]
∅5.1192 ±0.0005
[∅130mm m6]
INPUT SHAFT
DETAIL
OUTPUT SHAFT
DETAIL
Weight without oil: 2536 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
47
Selection/Dimensions
M12-1.75 X 1.00” DEEP
METRIC THREAD
1.2586 ±0.0012
[32mm]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G285 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
HOLLOW OUTPUT SHAFT
6.50
[165.10]
22.20
[563,88]
6.50
[165.10]
∅1.30
[33,00]
Specifications
10.00
[254,00]
11.31
[287.27]
10.00
[254,00]
11.31
[287.27]
∅1.30
[33,02]
8.00
[203,20]
DIPSTICK BREATHER
6.50
[165,10]
6.50
8.00 [165,10]
[203,20]
Nomenclature
LOW SPEED
END VIEW
6.50
[165,10]
8.63
[219,20]
30.06
[762,52]
3.00
[76,20]
3.00
[76,20]
47.63
[1209,80]
6.50
[165,10]
6.55
[166,37]
10.00
[254,00]
5.92
[150,37]
27.76
[705,10]
Easy Selection
13.88
[352,55]
10.00
[254,00]
15.35
[389,81]
11.47
[291,29]
M12-1.75 X 1.00” DEEP
METRIC THREAD
Selection/Dimensions
∅2.3630 ±0.0004
[∅60mm m6]
11.47
[291,43]
13.26
[336,80]
OPTIONAL
BACKSTOP
2.51
[63,83]
0.7086 0.0008
(18mm)
“B”
“A”
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 51
Weight without oil: 2256 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
48
13.10
[332,74]
4.92
[125,06]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G285 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
HOLLOW OUTPUT SHAFT
1.30
[32,99]
6.50
[165,10]
2.20
[741,68]
1.30
[33,00]
11.31
[287,27]
10.00
[254,00]
10.00
[254,00]
11.31
[287,27]
DIPSTICK BREATHER
8.00
203,20]
Specifications
6.50
[165,10]
6.50
[165,10]
6.50
8.00
[165,10]
203,20]
LOW SPEED
END VIEW
13.10
[332,74]
47.63
[1209,80]
6.50
[165,10]
5.41
[137,41]
4.72
[119,89]
27.76
[705,10]
10.00
[254,00]
11.47
[291,29]
14.18
[360,06]
M12-1.75 X 1.00” DEEP
METRIC THREAD
Easy Selection
13.88
[352,55]
11.47
[291,43]
13.26
[336,80]
OPTIONAL
BACKSTOP
2.10
[53,37]
0.5512 ±0.0008
[14mm]
“B”
∅1.9689 ±0.0005
[∅50mm m6]
“A”
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 51
Weight without oil: 2319 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
49
Selection/Dimensions
10.00
[254,00]
4.99
[126,72]
Nomenclature
6.50
[165,10]
8.63
[219,20]
30.06
[763,52]
3.00
[76,20]
3.00
[79,20]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G285 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
HOLLOW OUTPUT SHAFT
6.50
[165,10]
6.50
[165,10]
DIPSTICK BREATHER
∅1.299 THRU
[32,995]
∅1.30
[33,00]
10.00
[254,00]
11.31
[287,27]
Specifications
16.00
[406,40]
6.50
[165,10]
10.00
[254,00]
11.19
[284,23]
8.63
[219,20]
13.10
[332,74]
30.06
[763,52]
3.00
[76,20]
3.00
[76,20]
47.63
[1209,80]
LOW SPEED
END VIEW
Nomenclature
57.73
[1466,39]
6.50
[165,10]
6.50
[165,10]
44.63
[1133,65]
10.10
[256,59]
13.10
[332,74]
6.55
[166,37]
10.00
[254,00]
27.76
[705,10]
Easy Selection
10.00
[254,00]
5.92
[150,37]
13.88
[352,55]
11.52
[292,62]
11.42
[290,11]
13.26
[336,80]
OPTIONAL
M12-1.75 X 1.00” DEEP
METRIC THREADS
2.52
[63,88]
0.7086 0.0008
[18mm]
Selection/Dimensions
“B”
∅2.3630 ±0.0004
[∅60mm m6]
INPUT SHAFT
DETAIL
“A”
OUTPUT HUB
SEE PAGE 51
Weight without oil: 2413 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
50
4.99 ]
[126,72]
Twin Tapered Bushing
Kit Part Number
“A”
“B”
6”
454114
5.155”
1-1/2”
5-15/16”
454115
5.091”
1-1/2”
5-7/16”
454116
4.740”
1-1/4”
4-15/16”
454117
4.232”
1-1/4”
4-7/16”
454118
3.880”
1”
4-3/16”
454119
3.627”
1”
3-15/16”
454120
3.373”
1”
454121
138mm
36mm
454122
119mm
32mm
125mm
454123
114mm
32mm
120mm
454124
109mm
32mm
110mm
454125
100mm
28mm
100mm
454126
90mm
28mm
Selection/Dimensions
Easy Selection
150mm
130mm
Features/Benefits
Bore Dia.
Specifications
MagnaGear G285 Hollow Bore Twin Tapered Bushing Information
Nomenclature
SELECTION/DIMENSIONS
51
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G390 Parallel Shaft Part Numbers
Nominal Ratio
Specifications
D
O
U
B
L
E
Nomenclature
T
R
I
P
L
E
G390HP2
G390HP2
G390HP2
G390HP2
G390HP2
G390HP2
G390HP2
G390HP2
G390HP2
G390HP2
G390HP3
G390HP3
G390HP3
G390HP3
G390HP3
G390HP3
G390HP3
G390HP3
G390HP3
Solid Shaft
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
449607
449608
449609
449610
449611
449612
449613
449614
449615
449616
449563
449564
449565
449566
449567
449568
449569
449570
449571
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
449619
449583
449595
449620
449584
449596
449621
449585
449597
449622
449586
449598
449623
449587
449599
449624
449588
449600
449625
449589
449601
449626
449590
449602
449627
449591
449603
449628
449592
449604
449572
449545
449554
449573
449546
449555
449574
449547
449556
449575
449548
449557
449576
449549
449558
449577
449550
449559
449578
449551
449560
449579
449552
449561
449580
449553
449562
MagnaGear G390 Right Angle Shaft Part Numbers
Easy Selection
Nominal Ratio
Selection/Dimensions
T
R
I
P
L
E
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
G390HR3
Solid Shaft
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
449515
449516
449517
449518
449519
449520
449521
449522
449523
449524
449525
449526
449527
449528
449529
52
Solid Shaft
Hollow Shaft
Hollow Shaft
with Backstop
with Backstop
449530
449483
449498
449531
449484
449499
449532
449485
449500
449533
449486
449501
449534
449487
449502
449535
449488
449504
449536
449489
449506
449537
449490
449507
449538
449491
449508
449539
449492
449509
449540
449493
449510
449541
449494
449511
449542
449495
449512
449543
449496
449513
449544
449497
449514
MagnaGear
Shaft
Configuration
Reduction
Ratio
Part
Number
G390HP2
Parallel
Double
8 - 22.4
454018
G390HP3
Parallel
Triple
25 - 63
454017
G390HR3
Right Angle
Triple
12.5 - 63
454016
Mechanical fan kit includes fan, fan shroud, fan guard and mounting hardware.
Electric Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Voltage
Phase
Part
Number
All G390
All
All
All
230/460
3
454026
All G390
All
All
All
115
1
454027
All G390
All
All
All
230
1
454199
All G390
All
All
All
575
3
454028
Selection/Dimensions
Easy Selection
Electrical fan kit includes fan, electric motor, fan shroud, fan guard and mounting hardware.
Features/Benefits
Shaft Driven Fan Kits
Specifications
G390 Accessory Part Numbers
Nomenclature
SELECTION/DIMENSIONS
53
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G390 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
SOLID OUTPUT SHAFT
7.50
[190,50]
7.50
[190,50]
Specifications
10.56
[268,22]
12.00
[304,80]
10.56
[268,22]
12.00
[304,80]
23.70
[601,98]
∅1.30
[32,99]
∅1.30
[32,99]
DIPSTICK BREATHER
9.00
[228,60]
7.50
9.00
[228,60] [190,50]
9.80
[248,92]
31.88
[809,75]
2.88
[73,15]
2.88
[73,15]
14.17
[359,92]
50.42
[1280,67]
LOW SPEED
END VIEW
Nomenclature
4.67
[118,62]
5.49
[139,45]
7.50
[190,50]
7.50
[190,50]
8.07
[204,98]
6.69
[169,93]
10.56
[268,22]
29.76
[755,90]
9.00
[228,60]
10.56
[268,22]
14.88
[377,95]
Easy Selection
15.01
[381.28]
14.09
[357,86]
OPTIONAL
BACKSTOP
17.89
[454,36]
2.93
[74,30]
M16-2.0 X 1.42 DEEP
METRIC THREAD
6.02
[152,80]
0.7865 ±.0010
[20mm]
1.4161 ±0.0012
[36mm]
Selection/Dimensions
∅2.7567 ±0.0004
[∅70mm m6]
INPUT SHAFT
DETAIL
∅5.7097 ±0.0005
[∅145mm m6]
M24-3.0 X 1.97 DEEP
METRIC THREAD
OUTPUT SHAFT
DETAIL
Weight without oil: 3215 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
54
5.12
[130,02]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G390 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
SOLID OUTPUT SHAFT
7.50
[190,50]
7.50
[190,50]
31.03
[778,16]
∅1.30
[33,02]
∅1.30
[32,99]
DIPSTICK BREATHER
9.00
[228,60]
10.56
[268,22]
7.50
[190,50]
Specifications
12.00
[304,80]
7.50
9.00
[190,50]
[228,60]
12.00
[304,80]
10.56
[268,22]
9.80
[248,92]
31.88
[809,75]
2.88
[73,15]
50.42
[1280,67]
2.88
[73,15]
14.17
[359,92]
5.12
[130,02]
4.63
[117,49]
7.50
[190,50]
Nomenclature
LOW SPEED
END VIEW
7.50
[190,50]
3.97
[100,91]
8.07
[204,98]
29.76
[755,90]
6.69
[169,93]
10.56
[268,22]
∅9.00
[228,60]
10.56
[268,22]
14.20
[360,72]
Easy Selection
14.88
[377,95]
14.09
[357,89]
OPTIONAL
BACKSTOP
17.89
[454,36]
6.02
[152,80]
∅1.9689 ±0.0004
[∅50mm m6]
0.5500 ±0.0008
[14mm]
1.4161 ±0.0012]
[36mm]
INPUT SHAFT
DETAIL
M24-3.0 X 1.97 DEEP
METRIC THREAD
∅5.7097 ±0.0005
[∅145mm m6]
OUTPUT SHAFT
DETAIL
Weight without oil: 3304 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
55
Selection/Dimensions
M16-2.0 X 1.42 DEEP
METRIC THREAD
2.10
[53,30]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G390 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
SOLID OUTPUT SHAFT
7.50
[190,50]
7.50
[190,50]
∅1.30
[32,99]
∅1.30
[32,99]
12.00
[304,80]
10.56
[268.22]
9.00
[228,60]
7.50
[190,50]
Specifications
7.50
[190,50]
9.00
[228,60]
10.56
[268.22]
12.00
[304,80]
9.80
[248,92]
31.88
[809,75]
2.88
[73,15]
50.42
[1280,67]
2.88
[73,15]
LOW SPEED
END VIEW
Nomenclature
7.50
[190,50]
14.17
[359,92]
62.82
[1595,63]
7.50
[190,50]
12.40
[314,96]
6.86
[174,17]
8.07
[204,98]
6.69
[169,93]
10.56
[268,22]
14.17
[359,92]
48.65
[1235,71]
6.10
[154,94]
29.76
[755,90]
10.56
[268,22]
14.88
[377,95]
Easy Selection
9.51
[241,43]
14.09
[357,86]
OPTIONAL
BACKSTOP
17.89
[454,36]
M20-2.5 X 1.18 DEEP
METRIC THREAD
Selection/Dimensions
∅2.5599 ±0.0002
[∅65mm m6]
2.71
[68,83]
6.02
[152,80]
1.4161 ±0.0012
[36mm]
0.7078 ±0.0010
[18mm]
INPUT SHAFT
DETAIL
M24-3.0 X 1.97 DEEP
METRIC THREAD
∅5.7097 ±0.0005
[145mm m6]
OUTPUT SHAFT
DETAIL
Weight without oil: 3262 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
56
5.12
[130,02]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G390 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 22.4:1)
HOLLOW OUTPUT SHAFT
∅1.30
[32,99]
7.50
[190,50]
10.56
[268,22]
12.00
[304,80]
23.70
[601,98]
∅1.30
[32,99]
9.00
[228,60]
7.50
[190,50]
9.00
[228,60]
7.50
[190,50]
DIPSTICK BREATHER
Specifications
7.50
[190,50]
10.56
[268,22]
12.00
[304,80]
9.80
[248,92]
31.88
[809,75]
2.88
[73,15]
2.88
[73,15]
50.42
[1280,67]
14.17
[359,92]
5.12
[130,02]
5.49
[139,45]
7.50
[190,50]
Nomenclature
LOW SPEED
END VIEW
7.50
[190,50]
4.67
[118,62]
10.56
[268,22]
29.76
[755,90]
∅9.00
[228,60]
12.44
[315,93]
15.01
[381,29]
M16-2.0 X 1.42 DEEP
METRIC THREAD
Easy Selection
14.88
[377,95]
12.44
[315,93]
14.09
[357,89]
OPTIONAL
BACKSTOP
2.93
[74,30]
“A”
“B”
0.7864 ±0.0010
[20mm]
∅2.7567 ±0.0004
[∅70mm m6]
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 60
Weight without oil: 3056 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
57
Selection/Dimensions
10.56
[268,22]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G390 Parallel Shaft
TRIPLE REDUCTION (25:1 TO 63:1)
HOLLOW OUTPUT SHAFT
Specifications
7.50
[190,50]
31.03
[788,16]
∅1.30
[32,99]
7.50
[190,50]
DIPSTICK BREATHER
∅1.30
[32,99]
9.00
[228,60]
12.00
[304,80]
10.56
[268,22]
7.50
[190,50]
7.50
9.00
[228,60] [190,50]
12.00
[304,80]
10.56
[268,22]
9.80
[248,92]
31.88
[809,75]
14.17
[359,92]
Nomenclature
50.42
[1280,67]
2.88
[73,15]
2.88
[73,15]
LOW SPEED
END VIEW
4.63
[117,49]
3.97
[100,91]
7.50
[190,50]
7.50
[190,50]
10.56
[268,22]
29.76
[755,90]
Easy Selection
10.56
[268,22]
14.88
[377,95]
12.48
[317,04]
14.20
[360,72]
M16-2,0 X 1.42 DEEP
METRIC THREAD
Selection/Dimensions
∅1.9689 ±0.0004
[∅50mm m6]
12.48
[316,99]
14.09
[357,89]
OPTIONAL
BACKSTOP
2.10
[53,30]
“A”
“B”
0.5500 ±0.0008
[14mm]
INPUT SHAFT
DETAIL
OUTPUT HUB
SEE PAGE 60
Weight without oil: 3145 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
58
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G390 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 to 63.1:)
HOLLOW OUTPUT SHAFT
7.50
[190,50]
7.50
[190,50]
∅1.30
[33,0]
∅1.30
[33,0]
9.00
[228,60]
7.50
[190,50]
Specifications
10.56
[268,22]
7.50
[190,50]
9.00
[228,60]
10.56
[268,22]
50.42
[1280,67]
LOW SPEED
END VIEW
7.50
[190,50]
7.50
[190,50]
48.65
[1235,71]
12.40
[314,96]
5.12
[130,02]
62.82
[1595,63]
6.86
[174,17]
6.10
[154,94]
10.56
[268,22]
14.17
[359,92]
Nomenclature
2.88
[73,15]
2.88
[73,15]
9.80
[248,92]
31.88
[809.75]
∅9.00
[228,60]
29.76
[755,90]
10.56
[268,22]
12.44
[315,93]
12.44
[315,93]
14.09
[357,86]
OPTIONAL
BACKSTOP
M20-2.5 X 1.18 DEEP
METRIC THREAD
“A”
0.7078 ±0.0008
[18mm]
“B”
Easy Selection
14.88
[377,95]
2.71
[68,80]
∅2.5599 ±0.0004
[∅65mm m6]
OUTPUT HUB
SEE PAGE 60
Weight without oil: 3034 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
59
Selection/Dimensions
INPUT SHAFT
DETAIL
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G390 Hollow Bore Twin Tapered Bushing Information
Bore Dia.
Twin Tapered Bushing
Kit Part Number
“A”
“B”
7”
454130
6.014”
1-3/4”
6-1/2”
454131
5.662”
1-1/2”
6-7/16”
454132
5.599”
1-1/2”
6”
454133
5.155”
1-1/2”
Specifications
5-15/16”
454134
5.091”
1-1/2”
5-7/16”
454135
4.740”
1-1/4”
4-15/16”
454136
4.232”
1-1/4”
160mm
454137
147mm
40mm
150mm
454138
138mm
36mm
130mm
454139
119mm
32mm
125mm
454140
114mm
32mm
Nomenclature
Easy Selection
Selection/Dimensions
60
Solid Shaft
with Backstop
8.00
449713
449725
G525HP2
9.00
449714
449726
G525HP2
10.0
449715
449727
G525HP2
11.2
449716
449728
G525HP2
12.5
449717
449729
G525HP2
14.0
449718
449730
G525HP2
16.0
449719
449731
G525HP2
18.0
449720
449732
G525HP2
20.0
449721
449733
G525HP2
22.4
449722
449734
G525HP2
25.0
449723
449735
G525HP2
28.0
449724
449736
Nomenclature
G525HP2
MagnaGear G525 Right Angle Shaft
Part Numbers
Nominal Ratio
T
R
I
P
L
E
Solid Shaft
Solid Shaft
with Backstop
G525HR3
12.5
449659
449674
G525HR3
14.0
449660
449675
G525HR3
16.0
449661
449676
G525HR3
18.0
449662
449677
G525HR3
20.0
449663
449678
G525HR3
22.4
449664
449679
G525HR3
25.0
449665
449680
G525HR3
28.0
449666
449681
G525HR3
31.5
449667
449682
G525HR3
35.5
449668
449683
G525HR3
40.0
449669
449684
G525HR3
45.0
449670
449685
G525HR3
50.0
449671
449686
G525HR3
56.0
449672
449687
G525HR3
63.0
449673
449688
61
Easy Selection
D
O
U
B
L
E
Solid Shaft
Selection/Dimensions
Nominal Ratio
Features/Benefits
MagnaGear G525 Parallel Shaft Part Numbers
Specifications
SELECTION/DIMENSIONS
Features/Benefits
SELECTION/DIMENSIONS
G525 Accessory Part Numbers
Shaft Driven Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Part
Number
G525HP2
Parallel
Double
8 - 28
453954
G525HR3
Right Angle
Triple
12.5 - 63
453959
Mechanical fan kit includes fan, fan shroud, fan guard and mounting hardware.
Specifications
Electric Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Voltage
Phase
Part
Number
All G525
All
All
All
230/460
3
454029
All G525
All
All
All
230
1
453388
All G525
All
All
All
575
3
453389
Electrical fan kit includes fan, electric motor, fan shroud, fan guard and mounting hardware.
Nomenclature
Easy Selection
Selection/Dimensions
62
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G525 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 28:1)
SOLID OUTPUT SHAFT
12.00
[304,80]
6.00
[152,40]
9.38
[238,25]
∅1.53
[39.00]
∅1.53
[39.00]
10.87
[276,10]
9.38
[238,25]
18.75
[476,25]
10.87
[276,10]
Specifications
16.61
[421,89]
6.00
[152,40]
7.62
[193,55]
DIPSTICK LOCATION
(CHECK OIL LEVEL)
18.62
[472,95]
13.37
[339,60]
15.25
[387,35]
20.50
[520,70]
44.42
[1128,27]
19.59
[497,70]
1.90
[48,19]
MOUNTING PAD
THICKNESS
9.21
[233,93]
10.87
[276,10]
Nomenclature
LOW SPEED
END VIEW
9.00
[228,60]
30.46
[773,68]
29.50
[749,30]
14.75
[374,65]
26.10
[662,86]
4.87
[123,67]
1.92
[48,85]
MOUNTING PAD
THICKNESS
22.61
[574,29]
1.57
[40mm]
M20-2.5 TAP X 1.65 DEEP
METRIC THREAD
∅6.6940 ±0.0005
[∅170mm m6]
∅3.1469 ±0.0005
[∅80mm m6]
3.34
[84,94]
Easy Selection
10.87
[276,10]
6.25
[158,75]
7.33
[186,12]
8.58
[217,96]
7.04
[178,80]
0.87
[22mm]
M24-3 TAP X 2.46 DEEP
METRIC THREAD
INPUT SHAFT
DETAIL
Selection/Dimensions
OUTPUT SHAFT
DETAIL
Weight without oil: 3642 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
63
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G525 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 to 63:1)
SOLID OUTPUT SHAFT
6.00
[152,40]
9.38
[238,25]
∅1.53
[39.00]
∅1.53
[39.00]
DIPSTICK LOCATION
(CHECK OIL LEVEL)
7.83
[198,93]
7.43
[188,72]
10.87
[276,10]
Specifications
9.38
[238,25]
6.94
[176,28]
18.75
[476,25]
6.00
7.62
[152,40] [193,55]
10.87
[276,10]
18.62
[472,95]
LOW SPEED
END VIEW
20.50
[520,70]
Nomenclature
58.15
[1477,12]
38.56
[979,42]
9.21
[233,93]
13.37
[339,60]
15.25
[387,35]
19.59
[497,70]
1.90
[48,19]
MOUNTING PAD
THICKNESS
30.46
[773,68]
9.00
[228,60]
29.50
[749,30]
14.75
[374,65]
Easy Selection
22.61
[574,29]
13.63
[346,25]
M20-2.5 TAP X 1.77 DEEP
METRIC THREADS
0.79 ±0.01
[20mm]
1.92
[48,85]
MOUNTING PAD
THICKNESS
4.87
[123,67]
1.57
[40mm]
M24-3 TAP X 2.46 DEEP
METRIC THREAD
3.12
[79,37]
∅2.9536 ±0.0004]
[∅75mm m6]
∅6.6940 ±0.0005
[∅170mm m6]
7.04
[178,78]
INPUT SHAFT
DETAIL
Selection/Dimensions
OUTPUT SHAFT
DETAIL
Weight without oil: 3836 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
64
Solid Shaft
with Backstop
8.0
449821
449833
G700HP2
9.0
449822
449834
G700HP2
10.0
449823
449835
G700HP2
11.2
449824
449836
G700HP2
12.5
449825
449837
G700HP2
14.0
449826
449838
G700HP2
16.0
449827
449839
G700HP2
18.0
449828
449840
G700HP2
20.0
449829
449841
G700HP2
22.4
449830
449842
G700HP2
25.0
449831
449843
G700HP2
28.0
449832
449844
MagnaGear G700 Right Angle Shaft
Part Numbers
Nominal Ratio
T
R
I
P
L
E
Solid Shaft
Solid Shaft
with Backstop
G700HR3
12.5
449767
499782
G700HR3
14.0
449768
499783
G700HR3
16.0
449769
499784
G700HR3
18.0
449770
499785
G700HR3
20.0
449771
499786
G700HR3
22.4
449772
499787
G700HR3
25.0
449773
499788
G700HR3
28.0
449774
499789
G700HR3
31.5
449775
499790
G700HR3
35.5
449776
499791
G700HR3
40.0
449777
499792
G700HR3
45.0
449778
499793
G700HR3
50.0
449779
499794
G700HR3
56.0
449780
499795
G700HR3
63.0
449781
499796
65
Easy Selection
D
O
U
B
L
E
Selection/Dimensions
G700HP2
Nomenclature
Solid Shaft
Nominal Ratio
Features/Benefits
MagnaGear G700 Parallel Shaft Part Numbers
Specifications
SELECTION/DIMENSIONS
Features/Benefits
SELECTION/DIMENSIONS
G700 Accessory Part Numbers
Shaft Driven Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Part
Number
G700HP2
Parallel
Double
8 - 28
454020
G700HR3
Right Angle
Triple
12.5 - 63
454019
Mechanical fan kit includes fan, fan shroud, fan guard and mounting hardware.
Specifications
Electric Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Voltage
Phase
Part
Number
All G700
All
All
All
230/460
3
452097
All G700
All
All
All
230
1
452055
All G700
All
All
All
575
3
452054
Electrical fan kit includes fan, electric motor, fan shroud, fan guard and mounting hardware.
Nomenclature
Easy Selection
Selection/Dimensions
66
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G700 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 28:1)
SOLID OUTPUT SHAFT
13.00
[330,24]
7.00
[177,80]
10.00
[254,00]
∅1.77
[45,01]
DIPSTICK/VENT
9.25
[235,00]
KEY
LENGTH
∅1.77
[45,01]
11.87
[301,50]
10.00
[254,00]
11.87
[301,50]
21.58
[548,12]
7.00
[177,80]
9.25
[234,95]
3.31
[84,06]
LOW SPEED
END VIEW
10.75
[273,13]
10.75
[273,13]
17.13
[434,98]
23.50
[596,90]
49.37
[1254,00]
6.70
[170,18]
USABLE
SHAFT
LENGTH
1.93
[49,12]
MOUNTING PAD
THICKNESS
5.71
[145,03]
KEY
LENGTH
3.19
[80,94]
Nomenclature
3/4” NPT OIL DRAIN
Specifications
10.08
[256,03]
USABLE
SHAFT
LENGTH
21.43
[544,41]
32.00
[812,80]
4.87
[123,67]
3/4” NPT OIL DRAIN
26.41
[670,78]
1.77
[45mm]
3.54
[89,83]
∅3.3474
(∅85mm m6)
1.93
[49,12]
MOUNTING PAD
THICKNESS
M24 TAP X 2.46” DEEP
[62.5]
0.87
[22mm]
7.87
[199,82]
M20 TAP X 1.65” DEEP
[42.0]
INPUT SHAFT
DETAIL
∅7.48
(∅190mm m6)
OUTPUT SHAFT
DETAIL
Weight without oil: 4947 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
67
Selection/Dimensions
27.49
[698,25]
Easy Selection
16.00
[406,40]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G700 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
SOLID OUTPUT SHAFT
DIPSTICK LOCATION
( CHECK OIL LEVEL)
7.00
[177,80]
10.00
[254,00]
20.50
[520,70]
∅1.77
[45,01]
14.13
[359,78]
∅1.772
[45,009]
Specifications
11.87
[301,50]
10.00
[254,00]
7.00
[177,80]
11.87
[301,50]
LOW SPEED
END VIEW
Nomenclature
21.58
[548,12]
12.33
[313,17]
10.00
[254,00]
∅12.68
[322,07]
OPTIONAL
BACKSTOP
3.31
[84,06]
OIL DRAIN
LOCATION
TYPE. (4) PLACES
TOP & BOTTOM
THIS SIDE & FAR SIDE
10.75
[273,13]
17.13
[434,98]
23.50
[596,90]
7.00
[177,80]
1.93
[49,12]
MOUNTING PAD
THICKNESS
10.08
[256,03]
USABLE
SHAFT
LENGTH
11.87
[301,50]
10.75
[273,13]
41.68
[1058,55]
27.94
[709,59]
63.11
[1602.96]
49.37
[1254,00]
21.43
[544,41]
8.02
[203,71]
USABLE
SHAFT
LENGTH
32.00
[812,80]
11.87
[301,50]
7.38
[187,45]
KEY
LENGTH
16.00
[406,40]
Easy Selection
15.34
[389,66]
20.47
[519,84]
OPTIONAL
BACKSTOP
M20-2.5 TAP X 1.77
METRIC THREADS
∅3.3474 ±0.0004
[∅85mm m6]
1.93
[49,12]
MOUNTING PAD
THICKNESS
26.41
[670,78]
∅7.4816 0.0006
[∅190mm m6]
1.77
[45mm]
0.87
[22mm]
3.54
[90.00]
7.87
[199,82]
M24-3 TAP X 1.97
METRIC THREADS
Selection/Dimensions
INPUT SHAFT
DETAIL
OUTPUT SHAFT
DETAIL
Weight without oil: 5238 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
68
3.19
[80,94]
Solid Shaft
with Backstop
8.00
449929
449941
G920HP2
9.00
449930
449942
G920HP2
10.0
449931
449943
G920HP2
11.2
449932
449944
G920HP2
12.5
449933
449945
G920HP2
14.0
449934
449946
G920HP2
16.0
449935
449947
G920HP2
18.0
449936
449948
G920HP2
20.0
449937
449949
G920HP2
22.4
449938
449950
G920HP2
25.0
449939
449951
G920HP2
28.0
449940
449952
Nomenclature
G920HP2
MagnaGear G920
Right Angle Shaft Part Numbers
Nominal Ratio
T
R
I
P
L
E
Solid Shaft
Solid Shaft
with Backstop
G920HR3
12.5
449875
449890
G920HR3
14.0
449876
449891
G920HR3
16.0
449877
449892
G920HR3
18.0
449878
449893
G920HR3
20.0
449879
449894
G920HR3
22.4
449880
449895
G920HR3
25.0
449881
449896
G920HR3
28.0
449882
449897
G920HR3
31.5
449883
449898
G920HR3
35.5
449884
449899
G920HR3
40.0
449885
449900
G920HR3
45.0
449886
449901
G920HR3
50.0
449887
449902
G920HR3
56.0
449888
449903
G920HR3
63.0
449889
449904
69
Easy Selection
D
O
U
B
L
E
Solid Shaft
Selection/Dimensions
Nominal Ratio
Features/Benefits
MagnaGear G920
Parallel Shaft Part Numbers
Specifications
SELECTION/DIMENSIONS
Features/Benefits
SELECTION/DIMENSIONS
G920 Accessory Part Numbers
Shaft Driven Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Part
Number
G920HP2
Parallel
Double
8 - 28
454022
G920HR3
Right Angle
Triple
12.5 - 63v
454021
Mechanical fan kit includes fan, fan shroud, fan guard and mounting hardware
Specifications
Electric Fan Kits
MagnaGear
Shaft
Configuration
Reduction
Ratio
Voltage
Phase
Part
Number
All G920
All
All
All
230/460
3
454030
All G920
All
All
All
230
1
454031
All G920
All
All
All
575
3
454032
Electrical fan kit includes fan, electric motor, fan shroud, fan guard and mounting hardware.
Nomenclature
Easy Selection
Selection/Dimensions
70
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G920 Parallel Shaft
DOUBLE REDUCTION (8:1 TO 28:1)
SOLID OUTPUT SHAFT
14.25
[361.95]
DIPSTICK & BREATHER
∅2.047
[51,994]
12.50
[317,50]
10.25
[260,35]
23.44
[595,38]
7.91
[200,91]
12.50
[317,50]
11.45
[290,91]
4.10
[103,5]
12.08
[306,84]
1.16
[29,46]
LOW SPEED
END VIEW
12.08
[306,84]
19.44
[493,78]
24.50
[622,30]
4.10
[103,5]
55.13
[1400,18]
10.25
[260,35]
25.00
[634,96]
7.91
[200,91]
7.59
[192,79]
11.50
[292,10]
9.84
[250,00]
6.31
[160,27]
36.00
[914,40]
12.50
[317,50]
18.00
[457,20]
16.19
[411,11]
28.88
[733,55]
Easy Selection
12.50
[317,50]
Specifications
∅2.047
[51,994]
1.18
[30,04]
11.45
[290,81]
Nomenclature
10.25
7.91
[200,91] [260,35]
29.64
[752,73]
8.90
[226,07]
∅8.4658 ±0.0004
[∅215mm m6]
1.97
[50mm]
M24-3.0 X 1.96”
METRIC THREAD
8.90
[226,07]
0.98
[25mm]
M 20-2.5 X 1.75”
METRICTHREAD
OUTPUT SHAFT
DETAIL
INPUT SHAFT
DETAIL
Weight without oil: 6838 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
71
Selection/Dimensions
3.93
[99,85]
∅3.7411 ±0.0004
[∅95mm m6]
Features/Benefits
SELECTION/DIMENSIONS
MagnaGear G920 Right Angle Shaft
TRIPLE REDUCTION (12.5:1 TO 63:1)
SOLID OUTPUT SHAFT
OPTIONAL BACKSTOP
7.91
[200,91]
∅2.047
[52,000]
10.25
[260,35]
Specifications
1.18
[30,04]
11.45
[290,81]
10.25
[260,35]
23.44
[595,38]
7.91
[200,91]
12.50
[317,50]
4.1
[103,5]
12.50
[317,50]
11.45
[290,81]
9.84
[250,00]
11.50
[292,10]
DIPSTICK & BREATHER
LOCATION
∅2.047
[52,000]
12.08
[306,85]
12.08
[306,85]
24.50
[622,30]
4.1
[103,9]
19.44
[493,78]
1.18
[30,04]
LOW SPEED
END VIEW
Nomenclature
46.54
[1182,12]
7.91
10.25
[260,35] [200,91]
71.54
[1817,08]
55.13
[1400,18]
25.00
[634,96]
2.56
[64,98]
MOUNTING PAD
THICKNESS
12.50
[317,50]
36.00
[914,40]
12.50
[317,50]
18.00
[457,20]
Easy Selection
16.19
[411,11]
21.06
[534,87]
OPTIONAL
BACKSTOP
7.87
[200,00]
8.91
[226,31]
2.56
[63,6]
MOUNTING PAD
THICKNESS
29.57
[751,07]
∅8.4658 ±0.0006
[∅215mm m6]
3.73
[94,74]
M20-2.5 X 1.75”
METRIC THREAD
M24-3.0 X 1.96”
METRIC THREAD
∅3.5443 ±0.0004
[∅90mm m6]
Selection/Dimensions
0.98
[25mm]
1.97
[50mm]
8.90
[226,06]
OUTPUT SHAFT
DETAIL
INPUT SHAFT
DETAIL
Weight without oil: 7309 lbs
Dimensions in [ ] are millimeters.
Drawing for reference only. Contact DODGE for certified drawing.
72
Features/Benefits
SELECTION/DIMENSIONS
M
SB9
B
F
SB6
B
SB7
SB7
SWING BASE AND
TORQUE ARM LOCATED
DIRECTLYv BELOW HIGH SPEED
SHAFT OF GEAR DRIVE
SB3
SB4
SB1
Specifications
SB8
4 HOLES
O S
SB5 DIA
SB2
SB3
SB4
R
Drive Size
G100
G150
G210
G285
G390
G525
G700
G920
SB1
56.0
62.0
66.0
66.0
73.0
65.0
68.0
78.0
SB2
0.75
0.75
0.75
0.75
0.75
1.00
1.25
1.50
SB3
5.00
5.00
5.00
5.00
5.25
7.00
8.00
9.00
SB4
7.00
7.00
7.00
7.75
8.00
10.00
12.00
13.00
SB5
0.689
0.689
0.689
0.866
0.866
1.024
1.299
1.299
SB6
28.4
29.7
30.9
35.7
39.4
42.1
48.9
54.9
SB7
7.00
7.38
7.50
8.50
9.50
11.88
12.75
13.25
SB8
12.3
12.7
13.4
15.2
16.2
23.1
25.2
28.0
SB9
17.25
18.5
19.8
23.1
24.2
24.3
27.8
30.3
Nomenclature
MagnaGear Swing Base Dimensions - Inches
Reaction Forces
73
R
Force at
Torque
Arm (lbs)
F
Force at End
of Tapered
Bushing (lbs)
4300
6200
6400
9100
6600
10000
8300
13100
9900
15300
3100
4900
4000
6700
6000
9400
7700
12400
9100
14500
M
Bending
Moment at
End of Tapered
Bushing (lb-in)
31000
50900
44100
75700
65700
102600
88000
142400
113000
180100
Notes:
1 - The illustration above is representative and does not agree in exact detail for all sizes.
2 - Gear drives are for horizontally mounted operation (high speed & low speed shaft) unless
specifically stated otherwise. Refer to factory if inclined operation is required.
3 - Dimensions are for reference only and are subject to change without notice unless certified.
4 - Reaction forces are provided for 100% and 200% torque conditions. The 100% condition
is representative of normal operating loads at full motor horsepower. The 200% condition
is representative of maximum loads encounered at start up. Reaction forces provided are
based on estimated weights and full mechanical rating (s.f.=1.0). Values will vary based on
actual weights and torque transmitted. Reaction forces (R & F) and bending moment (M) for
a specific application will be provided during order processing.
5 - For drives with hollow low speed shafts, the location of “M” and “F” is at the outer edge of
the tapered bushing.
6 - Reaction forces may be acting in a direction different than shown.
Easy Selection
Hollow Low Speed Shaft
M
R
F
Drive
Torque
Bending
Force at End
Size Condition Force at
Moment at End
Torque Arm of Low Speed
of Low Speed
(lbs)
Shaft (lbs)
Shaft (lb-in)
100%
4400
3100
45200
G100
200%
6200
5000
73800
100%
6500
4100
64500
G150
200%
9200
6800
109300
100%
7500
7100
104100
G210
200%
10900
10550
167500
100%
8500
8200
127500
G285
200%
13300
13000
204800
100%
10200
9900
167500
G390
200%
15600
15300
264000
100%
15500
13300
283900
G525
200%
24600
22400
491300
100%
20200
17000
426600
G700
200%
31600
28500
728800
100%
24900
20500
555900
G920
200%
38000
33600
963500
Selection/Dimensions
Solid Low Speed Shaft
Engineering/Technical
ENGINEERING/TECHNICAL
MAGNAGEAR Reducer
HORSEPOWER METHOD OF SELECTION
Part Number Index
Step 1: Determine Service Factor - See Table 2 for electric motor,
hydraulic motor, steam turbine or gas turbine driven applications
operating up to 10 hours per day or over 10 hours per day. If the
application is engine driven, refer to Table 1 to convert the service
factor obtained from Table 2 to the service factor required for engine
driven applications. Service factor recommendations are minimum.
(For extreme shock or high energy loads which must be absorbed,
as when stalling, or for power sources not listed, consult DODGE for
special consideration.)
and compare the computed results with the thermal capacities shown
on pages 86 thru 90.
EXAMPLES OF SELECTION
Horsepower Method
A ball mill with a helical ring gear operating at 89 rpm is driven by
a 600 horsepower 1750 rpm motor. The duty cycle is 24 hours per
day. Ambient conditions at the installation are 90 degrees Fahrenheit
ambient temperature and an altitude of 5000 feet above sea level. A
parallel shaft reducer is required.
Step 2: Calculate Equivalent Horsepower - Multiply the actual
horsepower to be transmitted by the service factor obtained from Step
1.
Step 1: Determine Service Factor - From Table 2, Service Factors,
locate “Mills, Rotary – Ball and Rod Mills with Helical Ring Gear” and
under the column headed “10+ Hrs/Day Service” find the Service
Factor which is 1.50.
Step 3: Calculate Required Ratio - Divide the high speed shaft rpm
by the low speed shaft rpm.
Step 4: Determine Unit Size and Ratio - Refer to the horsepower
tables on pages 76 thru 80. From the high speed input shaft rpm in
the left hand column and desired ratio and output speed in the next
two columns, trace right into the table and find the horsepower rating
equal to or greater than the equivalent horsepower obtained from Step
2.
Step 2: Calculate Equivalent Horsepower - Multiply the motor
horsepower by the service factor (600 x 1.50 = 800) to get the
equivalent horsepower of 800.
Step 3: Calculate Required Ratio - Divide the high speed shaft rpm
by the low speed shaft rpm (1750 / 89 = 19.66) to get the required
ratio of 19.66:1.
Step 5: Check Thermal Ratings - Compare the actual horsepower
required (without service factor) with the thermal horsepower capacity
by referring to the thermal horsepower rating tables on pages 86 thru
90. If the actual transmitted horsepower exceeds the thermal capacity,
a shaft driven auxiliary cooling fan, electric auxiliary cooling fan or a
heat exchanger may be added to provide additional thermal capacity
or a larger reducer may be required.
NOTE:
Step 4: Determine Unit Size and Ratio - Locate the horsepower
table for parallel shaft MAGNAGEAR reducers with a 1750 high speed
shaft rpm (page 76). Trace down the ratio column to the closest
nominal ratio to the 19.66:1 required ratio and find 20.0:1 ratio. Trace
to the right until the horsepower equals or exceeds the calculated
equivalent horsepower of 800 and find 1004 horsepower listed under
a MAGNAGEAR G700 reducer.
On applications where the continuous running time never exceeds three hours and the idle time
is equal to or greater than the running time,
thermal limitations can be disregarded and the
unit operated at loads up to the listed mechanical
rating modified by applicable service factors.
Step 5: Check Thermal Ratings - Refer to the parallel shaft
MAGNAGEAR thermal horsepower rating table for parallel reducers on
page 86. Locate the table for a 20.0:1 ratio with a 1750 high speed
shaft rpm and find the thermal ratings for the MAGNAGEAR G700
reducer. Note the thermal rating without a fan is 262 horsepower, the
thermal rating with a shaft fan is 520 horsepower and the thermal
rating with an electric fan is 1071 horsepower. These ratings must
be adjusted for ambient conditions. From the MAGNAGEAR Thermal
Horsepower Rating Adjustment Factor tables on page 90, find the
multipliers for 90 degree Fahrenheit ambient temperature and 5000
feet of altitude. Note the factor for 90 degree Fahrenheit ambient is
0.93 and the factor for 5000 feet of altitude is 0.90. (Interpolation
can be used to determine factors for values between those listed in
the tables). Additional factors for ambient air velocity, duty cycle and
maximum oil sump temperature are also provided.
Step 6: Check Overhung and Thrust Loads - Consult DODGE if
external thrust loads or overhung loads are present.
Step 7: Check Dimensions - See applicable pages for dimensions,
weights, part numbers and instructions on how to order.
TORQUE METHOD OF SELECTION
Determine service factor, equivalent torque and unit size using the
same steps as outlined above for the horsepower method, except in
Step 4 refer to the torque tables on pages 81 thru 85. Convert the
required torque without service factor to horsepower by using the
following formula:
Horsepower =
To determine the actual thermal horsepower capacity of the reducer,
multiply the thermal horsepower given in the table by the adjustment
factors.
Torque (lb-in) X Low Speed Shaft rpm
63025
74
MAGNAGEAR Reducer
HORSEPOWER METHOD OF SELECTION
Horsepower =
Example:
Horsepower =
Step 6: Check Overhung and Thrust Loads - Consult Dodge if
overhung or thrust loading exists.
Torque x Reducer Output RPM
63025
198,237 x (1170/28)
63025
= 131.4 Hp
Step 7: Check Dimensions - Refer to the specifications/ dimensions
pages 65-67 for DODGE MAGNAGEAR G700 parallel reducer with a
20.0:1 ratio. The part number for the reducer is 449829 and for the
electric cooling fan kit is 452097. The exact ratio of the reducer is
given on pages 90 thru 91 and is 19.567:1.
Locate the table for the thermal horsepower ratings for right angle
MAGNAGEAR reducers on page 87. Locate the table for a 28.0:1
ratio with an 1170 high speed shaft RPM and find the thermal
ratings for a MagnaGear G285 Reducer. Note the thermal rating
without a fan is 147 horsepower, the thermal rating with a shaft fan
is 215 horsepower and the thermal rating with an electric fan is 460
horsepower. These ratings must be adjusted for ambient conditions.
From the MAGNAGEAR Thermal Horsepower Rating Adjustment Factor
tables on page 89, find the multipliers for 100 degree Fahrenheit
ambient temperature and 2,500 feet of altitude. Note the factor for
100 degree Fahrenheit ambient is 0.86 and the factor for 2,500 feet
of altitude is 0.95. (Interpolation can be used to determine factors
for values between those listed in the tables). Additional factors for
ambient air velocity, duty cycle and maximum oil sump temperatures
are also provided.
Step 8: Check Accessories - Include any accessories that may be
required.
TORQUE METHOD
Running 10 hours a day, a heavy duty bucket elevator requires
198,237 lb-in of torque at a 43 rpm. The motor speed is 1170 rpm
and is coupling connected. Ambient conditions at the installation
are 100 degrees Fahrenheit ambient temperature and an altitude of
2,500 feet. A right angle reducer is required.
Step 1: Determine Service Factor - From Table 1, Service Factors,
locate “ELEVATORS – Bucket – Heavy Duty” and under the column
headed “3-10 Hrs/Day Service” locate the service factor which is
1.50.
To determine the actual thermal horsepower capacity of the reducer,
multiply the thermal horsepower given in the table by the adjustment
factors.
Step 2: Calculate Equivalent Torque - Multiply the system torque
of 198,237 by the service factor of 1.50 (198,237 x 1.50 = 297,356)
to get 297,356 lb-in equivalent torque.
Actual Thermal Hp Capacity = 215 * 0.86 * 0.95 = 184.9 Hp. Since
184.9 Hp exceeds the input motor horsepower rating of 131.4 a
shaft fan will provide adequate cooling for this application. (Using
no cooling, the Actual Thermal Hp Capacity = 147 x 0.86 x 0.95 =
126.4 Hp. Since this is less than the input motor Hp rating of 131.4
adequate cooling would not be provided).
Step 3: Calculate Required Ratio - Divide the high speed shaft rpm
by the low speed shaft rpm (1170 / 43 = 27.2) to get the required
ratio of 27.2:1.
Step 4: Determine Unit Size and Ratio - Locate the torque table
for right angle MAGNAGEAR reducers with a 1170 high speed shaft
rpm (page 84). Trace down the ratio column to the closest nominal
ratio to the 27.2:1 required ratio and find 28.0:1 ratio. Trace to the
right until the torque equals or exceeds the calculated equivalent
torque of 297,356 and find 307,000 listed under a MAGNAGEAR
G285 reducer.
Step 6: Check Overhung and Thrust Loads - Consult Dodge if
overhung or thrust loading exists.
Step 7: Check Dimensions - Refer to the specifications/ dimensions
pages 43, 44 and 47 for DODGE MAGNAGEAR G285 right angle solid
shaft reducer with a 28.0:1 ratio. The part number for the reducer is
449346 and for the shaft driven cooling fan kit is 451526. The exact
ratio of the reducer is given on page 91 and is 28.254:1.
Step 5: Check Thermal Ratings - In order to use the MAGNAGEAR
thermal tables the required torque value without service factor
(198,237 in-lbs) must be converted to horsepower:
Step 8: Check Accessories - Include any accessories that may be
required. In the case of an elevator application a backstop is often
specified. If a MAGNAGEAR with an integral backstop is required,
refer again to the specifications/ dimensions pages 43, 44 and 47
for DODGE MAGNAGEAR G285 right angle solid shaft reducer with a
28.0:1 ratio and a backstop. The part number for the reducer is now
449391. The part number for the shaft driven cooling fan kit does not
change and remains 451526.
75
Part Number Index
Actual Thermal Hp Capacity = 1071 * 0.93 * 0.90 = 896.4Hp. Since
896.4 Hp exceeds the input motor horsepower rating of 600 an
electric cooling fan will provide adequate cooling for this application.
(Using a shaft fan, the Actual Thermal Hp Capacity = 520 x 0.93 x .90
= 435.2 Hp. Since this is less than the input motor Hp rating of 600
adequate cooling would not be provided).
Engineering/Technical
ENGINEERING/TECHNICAL
Engineering/Technical
ENGINEERING/TECHNICAL
MAGNAGEAR Parallel Shaft Rating
Horsepower Rating
(Multiply listed values by 0.7457 to obtain the power Rating in kilowatt)
Part Number Index
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
8.00
219
9.00
194
10.0
175
11.2
156
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
1750
22.4
78
25.0
70
28.0
63
31.5
56
35.5
49
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
Size
100
150
210
285
390
525
700
920
293
263
238
217
200
177
162
145
125
116
103
92
83
76
70
62
57
51
44
466
418
378
346
319
283
258
231
199
185
165
142
128
117
108
96
87
78
67
646
579
523
470
427
386
355
315
276
260
233
208
188
168
153
138
120
113
98
939
836
761
689
623
568
496
446
398
343
324
293
264
240
209
188
167
155
140
1279
1152
1058
947
876
775
649
589
531
475
437
391
361
319
292
266
241
217
194
1543
1430
1332
1233
1139
1036
938
845
762
692
619
564
NA
NA
NA
NA
NA
NA
NA
2135
1973
1817
1631
1480
1330
1222
1113
1004
900
800
735
NA
NA
NA
NA
NA
NA
NA
2849
2643
2388
2166
1945
1760
1584
1435
1279
1179
1073
979
NA
NA
NA
NA
NA
NA
NA
Note: Shaded area is Triple Reduction.
76
MAGNAGEAR Parallel Shaft Rating
Horsepower Rating
(Multiply listed values by 0.7457 to obtain the power Rating in kilowatt)
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
8.0
179
9.0
159
10.0
143
11.2
128
12.5
114
14.0
102
16.0
89
18.0
79
20.0
72
22.4
64
1430
25.0
57
28.0
51
31.5
45
35.5
40
40.0
36
45.0
32
50.0
29
56.0
26
63.0
23
Size
100
150
210
285
390
525
700
920
244
219
198
180
166
147
134
120
104
96
86
77
69
63
58
52
47
42
36
389
349
315
288
265
235
214
192
165
154
137
118
107
97
89
79
72
65
55
539
483
436
391
355
321
295
262
230
216
194
173
156
140
127
115
99
93
82
784
698
635
574
518
472
412
371
331
286
269
243
220
200
174
156
139
129
116
1068
962
882
788
728
644
539
490
442
395
364
325
300
265
242
221
200
180
160
1340
1242
1156
1040
948
863
781
703
633
575
514
469
NA
NA
NA
NA
NA
NA
NA
1862
1682
1515
1359
1233
1107
1017
926
836
749
665
610
NA
NA
NA
NA
NA
NA
NA
2429
2206
1991
1806
1621
1467
1319
1194
1064
981
892
813
NA
NA
NA
NA
NA
NA
NA
Note: Shaded area is Triple Reduction.
77
Part Number Index
Engineering/Technical
ENGINEERING/TECHNICAL
Engineering/Technical
ENGINEERING/TECHNICAL
MAGNAGEAR Parallel Shaft Rating
Horsepower Rating
(Multiply listed values by 0.7457 to obtain the power Rating in kilowatt)
Part Number Index
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
8.00
146
9.00
130
10.0
117
11.2
104
12.5
94
14.0
84
16.0
73
18.0
65
20.0
59
22.4
52
1170
25.0
47
28.0
42
31.5
37
35.5
33
40.0
29
45.0
26
50.0
23
56.0
21
63.0
19
Size
100
150
210
285
390
525
700
920
204
182
165
150
138
122
112
100
86
80
71
64
58
53
48
43
39
35
30
325
291
262
239
220
195
178
160
138
128
114
98
89
81
74
66
60
53
46
450
403
363
325
295
267
246
218
191
180
161
144
130
116
105
95
82
77
68
655
582
528
477
431
393
343
309
276
238
224
203
183
166
145
130
115
107
96
892
802
735
655
606
536
449
408
368
329
303
271
250
220
201
183
166
149
133
1180
1068
964
867
790
719
650
585
527
479
428
390
NA
NA
NA
NA
NA
NA
NA
1554
1404
1264
1133
1028
923
847
771
695
623
553
507
NA
NA
NA
NA
NA
NA
NA
2028
1842
1662
1506
1352
1223
1098
995
886
816
742
676
NA
NA
NA
NA
NA
NA
NA
Note: Shaded area is Triple Reduction.
78
MAGNAGEAR Right Angle Rating
Horsepower Rating
(Multiply listed values by 0.7457 to obtain the power Rating in kilowatt)
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
22.4
78
25.0
70
28.0
63
1750
31.5
56
35.5
49
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
12.5
114
14.0
102
16.0
89
18.0
79
20.0
72
22.4
64
25.0
57
1430
28.0
51
31.5
45
35.5
40
40.0
36
45.0
32
50.0
29
56.0
26
63.0
23
Size
100
150
210
285
390
525
700
920
199
178
161
140
126
115
106
94
86
77
66
59
56
50
45
165
148
133
116
105
96
88
78
71
64
55
49
46
42
38
317
284
256
223
201
183
169
150
137
123
106
94
89
80
73
263
236
213
185
167
152
140
125
114
102
88
78
74
66
60
439
394
355
318
288
250
226
205
189
167
146
130
121
110
101
366
327
295
264
240
207
188
170
157
139
122
108
100
91
83
566
538
478
435
393
355
313
291
263
239
208
187
167
155
140
470
447
397
361
327
295
260
242
219
199
173
155
138
128
116
666
628
595
567
532
480
434
372
331
298
272
245
221
199
174
554
522
494
472
434
392
355
310
275
248
222
200
181
162
143
1014
1014
941
846
771
701
594
542
492
445
400
360
327
292
266
880
836
783
704
642
583
494
450
409
370
332
299
271
242
220
1385
1385
1234
1107
1003
901
778
705
632
580
528
476
426
378
346
1203
1142
1027
921
835
749
646
585
525
482
438
395
353
313
287
1766
1791
1621
1470
1320
1198
1072
927
841
752
681
606
558
507
462
1534
1477
1351
1224
1098
996
891
771
699
625
565
503
463
421
383
79
Part Number Index
Engineering/Technical
ENGINEERING/TECHNICAL
Engineering/Technical
ENGINEERING/TECHNICAL
MAGNAGEAR Right Angle Rating
Horsepower Rating
(Multiply listed values by 0.7457 to obtain the power Rating in kilowatt)
Part Number Index
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
12.5
94
14.0
84
16.0
73
18.0
65
20.0
59
22.4
52
25.0
47
28.0
42
1170
31.5
37
35.5
33
40.0
29
45.0
26
50.0
23
56.0
21
63.0
19
Size
100
150
210
285
390
525
700
920
137
123
111
97
87
80
73
65
59
53
46
41
38
34
31
219
196
177
154
139
127
117
104
95
85
73
65
61
55
50
305
272
245
220
199
173
157
142
130
115
101
89
83
76
69
391
372
331
301
273
246
217
202
182
165
144
129
115
106
96
461
434
412
393
355
321
290
258
229
206
182
164
148
133
117
765
723
652
586
534
485
411
374
340
307
276
248
225
201
183
1045
951
856
767
695
623
537
487
436
400
364
328
293
260
238
1332
1253
1125
1019
914
829
742
641
581
519
470
418
384
349
318
80
MAGNAGEAR Parallel Shaft Rating
Torque Rating (1,000 In-Lbs)
(Multiply listed values by 113 to obtain torque in Nm)
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
8.0
219
9.0
194
10.0
175
11.2
156
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
22.4
78
1750
25.0
70
28.0
63
31.5
56
35.5
49
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
Size
100
150
210
285
390
525
700
920
85
86
87
88
89
90
91
91
93
93
94
95
96
97
98
99
100
100
102
137
138
140
142
143
144
145
147
149
150
152
154
155
157
158
160
161
162
164
187
190
192
194
196
198
200
202
204
205
208
210
212
215
217
219
221
222
225
262
266
269
272
275
278
282
285
288
292
294
296
299
301
305
308
311
313
306
357
362
365
370
373
378
385
389
393
397
400
405
408
412
415
418
422
425
429
455
471
491
511
522
527
533
538
544
549
555
559
NA
NA
NA
NA
NA
NA
NA
621
643
665
673
680
688
694
701
708
716
724
730
NA
NA
NA
NA
NA
NA
NA
837
860
875
884
895
901
915
924
935
943
951
960
NA
NA
NA
NA
NA
NA
NA
NOTE: Shaded area is Triple Reduction
81
Part Number Index
Engineering/Technical
ENGINEERING/TECHNICAL
Engineering/Technical
ENGINEERING/TECHNICAL
MAGNAGEAR Parallel Shaft Rating
Torque Rating (1,000 In-Lbs)
(Multiply listed values by 113 to obtain torque in Nm)
Part Number Index
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
8.00
179
9.00
159
10.0
143
11.2
128
12.5
114
14.0
102
16.0
89
18.0
79
20.0
72
22.4
64
1430
25.0
57
28.0
51
31.5
45
35.5
40
40.0
36
45.0
32
50.0
29
56.0
26
63.0
23
Size
100
150
210
285
390
525
700
920
87
88
89
90
90
91
92
93
94
95
96
97
98
99
99
100
101
102
103
140
141
143
144
145
147
148
149
151
153
154
156
158
159
160
162
163
164
166
191
194
196
198
200
202
203
205
208
209
212
214
216
218
220
222
225
226
228
268
272
274
277
280
282
286
290
293
297
299
302
304
307
310
313
315
317
310
365
370
373
377
379
384
392
396
400
404
407
412
415
419
422
425
428
432
435
483
500
521
527
532
537
542
548
553
558
564
569
NA
NA
NA
NA
NA
NA
NA
663
671
679
687
694
701
707
714
721
728
736
742
NA
NA
NA
NA
NA
NA
NA
873
879
893
902
884
919
932
942
952
960
968
976
NA
NA
NA
NA
NA
NA
NA
Note: Shaded area is Triple Reduction.
82
MAGNAGEAR Parallel Shaft Rating
Torque Rating (1,000 In-Lbs)
(Multiply listed values by 113 to obtain torque in Nm)
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
8.00
146
9.00
130
10.0
117
11.2
104
12.5
94
14.0
84
16.0
73
18.0
65
20.0
59
22.4
52
1170
25.0
47
28.0
42
31.5
37
35.5
33
40.0
29
45.0
26
50.0
23
56.0
21
63.0
19
Size
100
150
210
285
390
525
700
920
89
90
90
91
92
93
94
94
96
96
98
98
99
100
101
102
102
103
104
142
144
145
146
148
149
150
152
154
155
157
159
161
162
163
164
165
166
168
195
197
199
201
203
205
207
209
212
213
215
218
220
222
224
225
228
229
231
274
277
279
282
284
287
291
295
298
303
304
307
310
312
315
317
320
321
314
373
377
379
383
386
391
398
403
407
412
414
419
422
426
429
431
434
437
440
520
525
531
537
542
547
552
557
563
568
573
578
NA
NA
NA
NA
NA
NA
NA
677
684
692
700
707
714
720
726
733
741
748
754
NA
NA
NA
NA
NA
NA
NA
891
897
910
920
901
936
949
958
969
976
984
992
NA
NA
NA
NA
NA
NA
NA
Note: Shaded area is Triple Reduction.
83
Part Number Index
Engineering/Technical
ENGINEERING/TECHNICAL
Engineering/Technical
ENGINEERING/TECHNICAL
MAGNAGEAR Right Angle Rating
Torque Rating (1,000 In-Lbs)
(Multiply listed values by 113 to obtain torque in Nm)
Part Number Index
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
12.5
140
14.0
125
16.0
109
18.0
97
20.0
88
22.4
78
25.0
70
28.0
63
1750
31.5
56
35.5
49
40.0
44
45.0
39
50.0
35
56.0
31
63.0
28
12.5
114
14.0
102
16.0
89
18.0
79
20.0
72
22.4
64
25.0
57
1430
28.0
51
31.5
45
35.5
40
40.0
36
45.0
32
50.0
29
56.0
26
63.0
23
Size
100
150
210
285
390
525
700
920
89
90
91
92
92
93
94
95
96
97
98
99
100
100
101
90
91
92
93
94
95
96
97
98
99
100
101
101
102
103
143
144
146
147
149
150
151
153
154
156
158
160
161
162
163
145
147
148
150
151
153
154
156
157
159
161
162
163
164
165
196
198
200
202
204
206
208
210
212
215
217
220
221
223
224
199
201
203
205
207
210
212
214
216
218
221
223
224
226
227
259
279
283
285
288
291
285
296
299
302
305
308
311
313
306
263
284
287
290
293
296
290
302
305
307
310
313
316
317
311
301
326
347
364
386
380
393
390
378
390
392
391
392
394
391
307
331
353
370
386
380
393
397
385
397
392
391
392
394
391
459
512
532
538
543
548
557
561
566
571
576
581
586
591
596
487
517
542
548
553
558
566
571
575
580
585
590
595
600
604
619
693
694
701
708
716
726
732
740
745
751
758
765
773
778
658
699
707
714
721
728
738
745
752
757
763
770
777
784
789
797
896
912
922
932
941
952
965
973
983
992
1002
1009
1017
1024
846
904
930
939
949
958
968
981
989
999
1008
1017
1024
1032
1040
84
MAGNAGEAR Right Angle Rating
Torque Rating (1,000 In-Lbs)
(Multiply listed values by 113 to obtain torque in Nm)
Approx.
High
Nominal Low
Speed
Ratio
Speed
Rpm
Rpm
12.5
94
14.0
84
16.0
73
18.0
65
20.0
59
22.4
52
25.0
47
28.0
42
1170
31.5
37
35.5
33
40.0
29
45.0
26
50.0
23
56.0
21
63.0
19
Size
100
150
210
285
390
525
700
920
92
93
94
95
96
97
97
98
99
100
101
102
102
103
104
148
149
151
153
154
155
157
158
160
161
163
164
165
166
167
202
205
207
209
211
214
216
218
220
222
224
226
227
229
230
268
289
293
296
299
302
296
307
310
312
315
317
320
321
314
312
337
359
377
386
380
393
404
392
404
392
391
392
394
391
518
546
552
557
562
567
575
580
584
589
594
599
603
609
613
699
712
719
727
733
741
750
757
763
769
775
781
788
795
800
899
937
947
956
966
975
984
997
1005
1015
1023
1033
1039
1047
1054
85
Part Number Index
Engineering/Technical
ENGINEERING/TECHNICAL
Engineering/Technical
ENGINEERING/TECHNICAL
MagnaGear Thermal Horsepower Ratings
Parallel Shaft
Ratings based on 80ºF ambient and sea level altitude. Refer to page 90 for adjustment factors if these condition do not apply.
Nominal
Ratios
HS
Shaft
rpm
1750
Part Number Index
1430
8 - 10
1170
870
1750
1430
12.5 - 14
1170
870
1750
1430
16 - 20
1170
870
Reducer Size
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
100
150
210
285
390
525
700
920
114
220
378
110
206
408
119
185
386
130
169
364
111
189
361
110
174
339
116
178
320
112
155
293
105
179
312
102
164
293
101
145
275
97
130
251
143
268
471
143
251
527
154
226
498
169
220
456
140
238
466
143
219
438
150
225
412
145
195
378
133
225
403
133
206
378
132
182
355
126
163
325
177
343
585
175
322
649
190
290
614
208
271
580
173
302
575
176
279
540
185
285
509
179
248
466
164
286
496
164
262
466
162
232
438
155
207
400
206
415
698
206
389
770
223
350
728
244
319
632
202
363
681
206
335
640
217
343
603
210
299
553
191
344
589
192
315
553
190
279
519
181
249
475
221
452
818
239
424
861
245
381
813
259
337
694
216
389
762
226
359
716
238
367
674
230
319
618
205
368
658
211
337
618
208
298
580
199
266
531
222
470
931
234
441
1052
234
397
994
234
305
849
217
437
931
217
403
874
234
413
824
226
359
755
206
414
834
217
379
782
214
335
735
205
300
672
275
544
1103
275
510
1246
275
459
992
275
359
847
277
549
1103
276
506
1036
275
518
976
266
451
895
262
520
1071
275
476
1005
272
421
944
260
376
863
308
585
1239
308
548
1170
308
493
1105
308
403
944
307
584
1239
306
539
1164
308
551
1097
298
480
1006
291
553
1192
297
507
1118
293
448
1051
280
400
961
86
Parallel Shaft
Ratings based on 80ºF ambient and sea level altitude. Refer to page 90 for adjustment factors if these condition do not apply.
Nominal
Ratios
HS
Shaft
rpm
1750
1430
22 - 28:1
1170
870
Reducer Size
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
100
150
210
285
390
525
700
920
96
163
279
93
147
261
88
129
244
83
108
223
120
205
360
120
186
337
116
163
316
112
136
288
149
260
443
148
236
415
145
207
389
140
173
355
174
313
526
174
284
492
171
249
461
165
208
421
186
334
588
190
303
550
192
266
516
187
222
470
187
376
745
196
341
697
198
299
653
193
250
596
238
472
956
259
428
895
260
375
839
254
314
765
264
502
1064
268
455
996
270
399
934
255
334
851
MagnaGear Thermal Horsepower Ratings
Parallel Shaft
Ratings based on 80ºF ambient and sea level altitude. Refer to page 89 for adjustment
factors if these condition do not apply.
Nominal
Ratios
HS
Shaft
rpm
1750
31.5 - 45
1430
1170
1750
50 - 63:1
1430
1170
Reducer Size
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
100
150
210
285
390
92
139
240
89
127
222
85
112
207
82
119
224
80
108
208
74
96
222
116
175
310
112
159
286
107
141
268
104
150
289
100
136
268
97
124
248
143
223
382
139
202
353
133
179
330
128
191
357
124
173
330
115
154
353
167
268
453
162
243
419
155
216
392
150
229
423
144
208
392
139
190
363
179
286
506
173
260
468
166
231
438
160
245
473
154
223
438
144
197
468
87
Engineering/Technical
MagnaGear Thermal Horsepower Ratings
Part Number Index
ENGINEERING/TECHNICAL
Engineering/Technical
ENGINEERING/TECHNICAL
MagnaGear Thermal Horsepower Ratings
Right Angle Shaft
Ratings based on 80ºF ambient and sea level altitude. Refer to page 90 for adjustment factors if these condition do not apply.
Nominal
Ratios
HS
Shaft
rpm
1750
Part Number Index
1430
12.5 - 18
1170
870
1750
1430
20 - 28
1170
870
Reducer Size
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
100
150
210
285
390
525
700
920
95
164
305
92
160
290
97
152
274
90
105
260
84
139
273
79
129
257
79
115
242
76
97
221
124
212
396
124
209
375
132
198
355
122
152
324
109
180
354
107
167
333
108
149
314
103
126
286
156
267
498
158
265
473
168
249
447
156
171
424
138
227
445
136
210
420
137
188
395
131
159
361
173
305
580
170
301
550
181
285
521
166
219
475
153
259
519
147
241
489
147
215
460
140
181
420
184
325
618
196
328
586
199
303
555
188
208
525
163
276
553
157
256
521
162
229
491
159
193
447
179
425
709
191
436
672
198
397
636
187
304
580
158
361
634
156
350
597
161
320
562
157
283
513
208
493
822
222
506
780
233
459
738
223
315
699
184
419
735
186
388
692
190
348
652
188
293
595
238
495
942
254
508
893
272
462
845
258
355
771
210
421
841
221
390
793
221
349
747
218
294
681
88
Right Angle Shaft
Ratings based on 80ºF ambient and sea level altitude. Refer to page 90 for adjustment factors if these condition do not apply.
Nominal
Ratios
HS
Shaft
rpm
1750
1430
31.5 - 45
1170
870
1750
1430
50 - 63:1
1170
870
Reducer Size
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
100
150
210
285
390
525
700
920
76
112
223
75
103
208
73
90
195
67
76
177
67
94
199
65
85
185
62
76
174
57
64
159
99
145
289
97
133
270
94
117
253
87
99
230
86
121
258
84
111
240
80
98
226
74
83
206
124
183
365
122
168
340
119
148
319
110
125
289
109
153
326
106
139
302
101
124
285
93
105
259
138
209
425
136
191
396
132
169
371
122
143
337
121
175
379
117
159
352
112
141
331
103
120
302
147
223
452
145
204
422
141
180
395
130
152
359
129
186
404
125
170
375
119
151
353
110
127
322
143
291
518
141
267
484
137
235
453
127
199
411
125
243
463
122
222
430
116
197
405
107
167
369
166
338
601
163
309
561
159
272
526
147
231
477
145
282
537
141
257
498
134
228
469
124
193
428
190
339
689
187
311
642
182
274
602
169
232
546
166
284
615
162
258
570
154
229
537
142
194
490
89
Engineering/Technical
MagnaGear Thermal Horsepower Ratings
Part Number Index
ENGINEERING/TECHNICAL
Engineering/Technical
ENGINEERING/TECHNICAL
MagnaGear Thermal Ratings
Ambient Temperature Adjustment Factors
Bref
50
1.19
60
1.13
70
1.07
80
1.00
90
0.93
100
0.86
110
0.78
120
0.69
Part Number Index
Ambient Temperature
(OF)
Duty Cycle Temperature Adjustment
Factors
BA
0 - Sea Level
1.00
2500
0.95
5000
0.90
7500
0.85
10000
0.81
12500
0.76
15000
0.72
17500
0.68
BD
100% (3 or more hours
continuous)
1.00
80% (Ave 48 min per hour)
1.05
60% (Ave 36 min per hour)
1.15
40% (Ave 24 min per hour)
1.35
20% (Ave 12 min per hour)
1.80
Maximum Allowable Oil Sump
Temperature Adjustment Factors
Altitude Adjustment Factors
Altitude (ft)
Operation Time
per Hour
Max Oil Sump
Temp OF
BT
185
0.81
200
1.00
220
1.13
To determine the actual thermal Hp rating, multiply the rating from
the thermal Hp tables by the appropriate factors from the tables
above.
Actual Thermal Hp = Thermal Hp Rating from
Table * Bref * BA * BD * BT * BV
Example: A MagnaGear G525 with a shaft fan, right angle,
25:1 ratio will be operated with a 1750RPM input motor. Ambient conditions at the installation site are 100F, 2500ft altitude.
MagnaGear will be located in a large indoor space. Duty cycle will
be 12 hours continuous operation per day, maximum allowable
oil sump temperature is 200F. To calculate the actual thermal Hp
rating, find the rated thermal Hp from the right angle thermal Hp
table and multiply by the appropriate rating factors. Interpolation
can be used to determine factors for values between those listed
in the tables. Ambient Air Velocity Adjustment Factors
(Does Not Apply to Reducers with Fan
Cooling)
Ambient
Air
Velocity
(fpm)
Typical Environment
BV
≤ 100
Small Confined Space
0.75
> 100 and
≤ 275
Large Indoor Space
1.00
> 275 and
< 725
Large Indoor Space
1.40
≥ 725
Outdoors
1.90
Actual Thermal Hp = 361 * 0.86 * 0.95 * 1.00 *
1.00 (Factor BV N/A due to fan cooling) = 295Hp
90
MAGNAGEAR Parallel Shaft, Double and Triple Reduction
Actual Ratio
Actual Ratio
Nominal
Ratio
Size 100
Size 150
Size 210
Size 285
Size 390
Size 525
Size 700
Size 920
8.00
8.080
8.146
8.044
7.759
7.754
8.182
8.083
8.155
9.00
9.115
9.189
9.091
8.838
8.719
9.133
9.048
9.039
10.0
10.195
10.278
10.180
9.813
9.579
10.227
10.161
10.172
11.2
11.271
11.363
11.480
10.956
10.847
11.499
11.460
11.340
12.5
12.335
12.435
12.776
12.256
11.824
12.727
12.764
12.776
14.0
14.053
14.167
14.264
13.571
13.543
14.126
14.370
14.211
16.0
15.552
15.678
15.600
15.761
16.476
15.758
15.777
16.046
18.0
17.515
17.657
17.804
17.722
18.325
17.686
17.492
17.888
20.0
20.611
20.737
20.560
20.096
20.526
19.818
19.576
20.297
22.4
22.306
22.487
22.381
23.598
23.191
22.013
22.076
22.200
25.0
25.343
25.500
24.802
25.187
25.405
24.873
25.132
24.624
28.0
28.589
28.766
28.031
28.119
28.767
27.510
27.577
27.235
31.5
31.975
32.174
31.389
31.457
31.359
NA
NA
NA
35.5
35.351
35.571
35.396
34.831
35.917
NA
NA
NA
40.0
38.687
38.928
39.392
40.453
39.519
NA
NA
NA
45.0
44.074
44.348
43.980
45.487
43.697
NA
NA
NA
50.0
48.775
49.078
51.983
51.581
48.601
NA
NA
NA
56.0
54.933
55.274
54.897
55.893
54.439
NA
NA
NA
63.0
64.642
64.915
63.393
63.381
61.507
NA
NA
NA
Note: Shaded area is Triple Reduction.
91
Part Number Index
Engineering/Technical
ENGINEERING/TECHNICAL
Engineering/Technical
ENGINEERING/TECHNICAL
MAGNAGEAR Right Angle Triple Reduction
Actual Ratio
Actual Ratio
Part Number Index
Nominal
Ratio
Size 100
Size 150
Size 210
Size 285
Size 390
Size 525
Size 700
Size 920
12.5
12.409
12.510
12.353
12.698
12.569
12.565
12.412
12.524
14.0
13.998
14.112
13.962
14.409
14.401
14.026
13.895
13.882
16.0
15.657
15.784
15.634
16.414
16.193
15.706
15.605
15.621
18.0
18.230
18.378
17.630
18.224
17.789
17.659
17.600
17.415
20.0
20.390
20.556
19.620
20.346
20.144
19.545
19.603
19.620
22.4
22.543
22.726
22.960
22.761
21.959
21.693
22.068
21.823
25.0
24.670
24.870
25.552
25.308
25.151
25.369
25.910
24.642
28.0
28.105
28.333
28.528
28.254
29.115
28.775
28.859
28.884
31.5
31.103
31.356
31.200
31.607
31.738
31.937
32.488
32.128
35.5
35.030
35.314
35.609
34.998
36.351
35.626
35.669
36.277
40.0
41.221
41.473
41.120
40.646
39.996
39.986
39.547
40.441
45.0
46.655
47.033
46.800
45.705
44.224
44.806
44.258
45.888
50.0
49.770
50.174
50.578
50.091
49.188
49.768
49.911
50.191
56.0
55.572
56.023
55.841
56.550
55.097
56.234
56.821
55.672
63.0
61.832
62.210
61.679
60.289
62.250
62.196
62.348
61.574
92
Page
448900 . . . . . . . . . . . . . . .
448901 . . . . . . . . . . . . . . .
448902 . . . . . . . . . . . . . . .
448903 . . . . . . . . . . . . . . .
448904 . . . . . . . . . . . . . . .
448905 . . . . . . . . . . . . . . .
448906 . . . . . . . . . . . . . . .
448907 . . . . . . . . . . . . . . .
448908 . . . . . . . . . . . . . . .
448909 . . . . . . . . . . . . . . .
448910 . . . . . . . . . . . . . . .
448911 . . . . . . . . . . . . . . .
448912 . . . . . . . . . . . . . . .
448913 . . . . . . . . . . . . . . .
448914 . . . . . . . . . . . . . . .
299523 . . . . . . . . . . . . . . .
448900 . . . . . . . . . . . . . . .
448901 . . . . . . . . . . . . . . .
448902 . . . . . . . . . . . . . . .
448903 . . . . . . . . . . . . . . .
448904 . . . . . . . . . . . . . . .
448905 . . . . . . . . . . . . . . .
448906 . . . . . . . . . . . . . . .
448907 . . . . . . . . . . . . . . .
448908 . . . . . . . . . . . . . . .
448909 . . . . . . . . . . . . . . .
448910 . . . . . . . . . . . . . . .
448911 . . . . . . . . . . . . . . .
448912 . . . . . . . . . . . . . . .
448913 . . . . . . . . . . . . . . .
448914 . . . . . . . . . . . . . . .
448915 . . . . . . . . . . . . . . .
448916 . . . . . . . . . . . . . . .
448917 . . . . . . . . . . . . . . .
448918 . . . . . . . . . . . . . . .
448919 . . . . . . . . . . . . . . .
448920 . . . . . . . . . . . . . . .
448921 . . . . . . . . . . . . . . .
448922 . . . . . . . . . . . . . . .
448923 . . . . . . . . . . . . . . .
448924 . . . . . . . . . . . . . . .
448925 . . . . . . . . . . . . . . .
448926 . . . . . . . . . . . . . . .
448927 . . . . . . . . . . . . . . .
448928 . . . . . . . . . . . . . . .
448929 . . . . . . . . . . . . . . .
448930 . . . . . . . . . . . . . . .
448931 . . . . . . . . . . . . . . .
448932 . . . . . . . . . . . . . . .
448933 . . . . . . . . . . . . . . .
448934 . . . . . . . . . . . . . . .
448935 . . . . . . . . . . . . . . .
448936 . . . . . . . . . . . . . . .
448937 . . . . . . . . . . . . . . .
448938 . . . . . . . . . . . . . . .
448939 . . . . . . . . . . . . . . .
448940 . . . . . . . . . . . . . . .
448941 . . . . . . . . . . . . . . .
448942 . . . . . . . . . . . . . . .
448943 . . . . . . . . . . . . . . .
448944 . . . . . . . . . . . . . . .
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
74
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
Part No.
Page
448945 . . . . . . . . . . . . . . .
448946 . . . . . . . . . . . . . . .
448947 . . . . . . . . . . . . . . .
448948 . . . . . . . . . . . . . . .
448949 . . . . . . . . . . . . . . .
448950 . . . . . . . . . . . . . . .
448951 . . . . . . . . . . . . . . .
448952 . . . . . . . . . . . . . . .
448953 . . . . . . . . . . . . . . .
448954 . . . . . . . . . . . . . . .
448955 . . . . . . . . . . . . . . .
448956 . . . . . . . . . . . . . . .
448957 . . . . . . . . . . . . . . .
448958 . . . . . . . . . . . . . . .
448959 . . . . . . . . . . . . . . .
448960 . . . . . . . . . . . . . . .
448961 . . . . . . . . . . . . . . .
448962 . . . . . . . . . . . . . . .
448963 . . . . . . . . . . . . . . .
448964 . . . . . . . . . . . . . . .
448965 . . . . . . . . . . . . . . .
448966 . . . . . . . . . . . . . . .
448967 . . . . . . . . . . . . . . .
448968 . . . . . . . . . . . . . . .
448969 . . . . . . . . . . . . . . .
448971 . . . . . . . . . . . . . . .
448972 . . . . . . . . . . . . . . .
448973 . . . . . . . . . . . . . . .
448974 . . . . . . . . . . . . . . .
448975 . . . . . . . . . . . . . . .
448976 . . . . . . . . . . . . . . .
448977 . . . . . . . . . . . . . . .
448978 . . . . . . . . . . . . . . .
448979 . . . . . . . . . . . . . . .
448980 . . . . . . . . . . . . . . .
448981 . . . . . . . . . . . . . . .
448982 . . . . . . . . . . . . . . .
448983 . . . . . . . . . . . . . . .
448984 . . . . . . . . . . . . . . .
448985 . . . . . . . . . . . . . . .
448986 . . . . . . . . . . . . . . .
448987 . . . . . . . . . . . . . . .
448988 . . . . . . . . . . . . . . .
448989 . . . . . . . . . . . . . . .
448990 . . . . . . . . . . . . . . .
448991 . . . . . . . . . . . . . . .
448992 . . . . . . . . . . . . . . .
448993 . . . . . . . . . . . . . . .
448994 . . . . . . . . . . . . . . .
448995 . . . . . . . . . . . . . . .
448996 . . . . . . . . . . . . . . .
448998 . . . . . . . . . . . . . . .
449000 . . . . . . . . . . . . . . .
449001 . . . . . . . . . . . . . . .
449002 . . . . . . . . . . . . . . .
449003 . . . . . . . . . . . . . . .
449004 . . . . . . . . . . . . . . .
449006 . . . . . . . . . . . . . . .
449007 . . . . . . . . . . . . . . .
449008 . . . . . . . . . . . . . . .
449009 . . . . . . . . . . . . . . .
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
Part No.
Page
449012 . . . . . . . . . . . . . . .
449013 . . . . . . . . . . . . . . .
449014 . . . . . . . . . . . . . . .
449015 . . . . . . . . . . . . . . .
449016 . . . . . . . . . . . . . . .
449017 . . . . . . . . . . . . . . .
449018 . . . . . . . . . . . . . . .
449019 . . . . . . . . . . . . . . .
449020 . . . . . . . . . . . . . . .
449021 . . . . . . . . . . . . . . .
449024 . . . . . . . . . . . . . . .
449025 . . . . . . . . . . . . . . .
449026 . . . . . . . . . . . . . . .
449027 . . . . . . . . . . . . . . .
449028 . . . . . . . . . . . . . . .
449029 . . . . . . . . . . . . . . .
449030 . . . . . . . . . . . . . . .
449032 . . . . . . . . . . . . . . .
449033 . . . . . . . . . . . . . . .
449034 . . . . . . . . . . . . . . .
449037 . . . . . . . . . . . . . . .
449038 . . . . . . . . . . . . . . .
449039 . . . . . . . . . . . . . . .
449040 . . . . . . . . . . . . . . .
449041 . . . . . . . . . . . . . . .
449042 . . . . . . . . . . . . . . .
449043 . . . . . . . . . . . . . . .
449044 . . . . . . . . . . . . . . .
449045 . . . . . . . . . . . . . . .
449046 . . . . . . . . . . . . . . .
449047 . . . . . . . . . . . . . . .
449048 . . . . . . . . . . . . . . .
449049 . . . . . . . . . . . . . . .
449050 . . . . . . . . . . . . . . .
449051 . . . . . . . . . . . . . . .
449052 . . . . . . . . . . . . . . .
449053 . . . . . . . . . . . . . . .
449054 . . . . . . . . . . . . . . .
449055 . . . . . . . . . . . . . . .
449056 . . . . . . . . . . . . . . .
449057 . . . . . . . . . . . . . . .
449058 . . . . . . . . . . . . . . .
449059 . . . . . . . . . . . . . . .
449060 . . . . . . . . . . . . . . .
449061 . . . . . . . . . . . . . . .
449062 . . . . . . . . . . . . . . .
449063 . . . . . . . . . . . . . . .
449064 . . . . . . . . . . . . . . .
449065 . . . . . . . . . . . . . . .
449066 . . . . . . . . . . . . . . .
449067 . . . . . . . . . . . . . . .
449068 . . . . . . . . . . . . . . .
449069 . . . . . . . . . . . . . . .
449070 . . . . . . . . . . . . . . .
449071 . . . . . . . . . . . . . . .
449072 . . . . . . . . . . . . . . .
449073 . . . . . . . . . . . . . . .
449074 . . . . . . . . . . . . . . .
449075 . . . . . . . . . . . . . . .
449076 . . . . . . . . . . . . . . .
449077 . . . . . . . . . . . . . . .
INDEX-1
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Part No.
Page
449078 . . . . . . . . . . . . . . .
449079 . . . . . . . . . . . . . . .
449080 . . . . . . . . . . . . . . .
449081 . . . . . . . . . . . . . . .
449082 . . . . . . . . . . . . . . .
449083 . . . . . . . . . . . . . . .
449084 . . . . . . . . . . . . . . .
449085 . . . . . . . . . . . . . . .
449086 . . . . . . . . . . . . . . .
449087 . . . . . . . . . . . . . . .
449088 . . . . . . . . . . . . . . .
449089 . . . . . . . . . . . . . . .
449090 . . . . . . . . . . . . . . .
449091 . . . . . . . . . . . . . . .
449092 . . . . . . . . . . . . . . .
449093 . . . . . . . . . . . . . . .
449094 . . . . . . . . . . . . . . .
449095 . . . . . . . . . . . . . . .
449096 . . . . . . . . . . . . . . .
449097 . . . . . . . . . . . . . . .
449098 . . . . . . . . . . . . . . .
449099 . . . . . . . . . . . . . . .
449100 . . . . . . . . . . . . . . .
449101 . . . . . . . . . . . . . . .
449102 . . . . . . . . . . . . . . .
449103 . . . . . . . . . . . . . . .
449104 . . . . . . . . . . . . . . .
449105 . . . . . . . . . . . . . . .
449106 . . . . . . . . . . . . . . .
449107 . . . . . . . . . . . . . . .
449108 . . . . . . . . . . . . . . .
449110 . . . . . . . . . . . . . .
449111 . . . . . . . . . . . . . .
449112 . . . . . . . . . . . . . .
449113 . . . . . . . . . . . . . .
449114 . . . . . . . . . . . . . .
449115 . . . . . . . . . . . . . .
449116 . . . . . . . . . . . . . .
449117 . . . . . . . . . . . . . .
449118 . . . . . . . . . . . . . .
449119 . . . . . . . . . . . . . .
449120 . . . . . . . . . . . . . . .
449121 . . . . . . . . . . . . . . .
449122 . . . . . . . . . . . . . . .
449123 . . . . . . . . . . . . . . .
449124 . . . . . . . . . . . . . . .
449125 . . . . . . . . . . . . . . .
449126 . . . . . . . . . . . . . . .
449127 . . . . . . . . . . . . . . .
449128 . . . . . . . . . . . . . . .
449129 . . . . . . . . . . . . . . .
449130 . . . . . . . . . . . . . . .
449131 . . . . . . . . . . . . . . .
449132 . . . . . . . . . . . . . .
449133 . . . . . . . . . . . . . .
449134 . . . . . . . . . . . . . .
449135 . . . . . . . . . . . . . .
449136 . . . . . . . . . . . . . .
449137 . . . . . . . . . . . . . .
449138 . . . . . . . . . . . . . .
449139 . . . . . . . . . . . . . .
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Engineering/Technical
Part No.
Part Number Index
PART NUMBER INDEX
Engineering/Technical
PART NUMBER INDEX
Part No.
Page
Part Number Index
449140 . . . . . . . . . . . . . . 25
449141 . . . . . . . . . . . . . . 25
449142 . . . . . . . . . . . . . . 25
449143 . . . . . . . . . . . . . . 25
449146 . . . . . . . . . . . . . . 25
449147 . . . . . . . . . . . . . . 25
449148 . . . . . . . . . . . . . . 25
449149 . . . . . . . . . . . . . . . 25
449150 . . . . . . . . . . . . . . 25
449151 . . . . . . . . . . . . . . 25
449152 . . . . . . . . . . . . . . 25
449153 . . . . . . . . . . . . . . . 25
449154 . . . . . . . . . . . . . . 25
449155 . . . . . . . . . . . . . . 25
449158 . . . . . . . . . . . . . . 25
449159 . . . . . . . . . . . . . . 25
449160 . . . . . . . . . . . . . . . 25
449161 . . . . . . . . . . . . . . 25
449162 . . . . . . . . . . . . . . 25
449163 . . . . . . . . . . . . . . 25
449164 . . . . . . . . . . . . . . 25
449165 . . . . . . . . . . . . . . 25
449166 . . . . . . . . . . . . . . 25
449167 . . . . . . . . . . . . . . . 25
449170 . . . . . . . . . . . . . . 25
449171 . . . . . . . . . . . . . . . 25
449172 . . . . . . . . . . . . . . . 25
449173 . . . . . . . . . . . . . . 25
449174 . . . . . . . . . . . . . . . 25
449175 . . . . . . . . . . . . . . . 25
449176 . . . . . . . . . . . . . . 25
449177 . . . . . . . . . . . . . . 25
449178 . . . . . . . . . . . . . . . 25
449179 . . . . . . . . . . . . . . 25
449182 . . . . . . . . . . . . . . 25
449183 . . . . . . . . . . . . . . . 25
449184 . . . . . . . . . . . . . . . . 5
449185 . . . . . . . . . . . . . . . 25
449186 . . . . . . . . . . . . . . . 25
449187 . . . . . . . . . . . . . . 25
449188 . . . . . . . . . . . . . . 25
449189 . . . . . . . . . . . . . . 25
449190 . . . . . . . . . . . . . . 25
449191 . . . . . . . . . . . . . . 25
449192 . . . . . . . . . . . . . . 34
449193 . . . . . . . . . . . . . . 34
449194 . . . . . . . . . . . . . . 34
449195 . . . . . . . . . . . . . . 34
449196 . . . . . . . . . . . . . . 34
449197 . . . . . . . . . . . . . . 34
449198 . . . . . . . . . . . . . . 34
449199 . . . . . . . . . . . . . . 34
449200 . . . . . . . . . . . . . . 34
449201 . . . . . . . . . . . . . . 34
449202 . . . . . . . . . . . . . . 34
449203 . . . . . . . . . . . . . . 34
449204 . . . . . . . . . . . . . . 34
449205 . . . . . . . . . . . . . . 34
449206 . . . . . . . . . . . . . . 34
449207 . . . . . . . . . . . . . . 34
449208 . . . . . . . . . . . . . . 34
Part No.
Page
449209 . . . . . . . . . . . . . .
449210 . . . . . . . . . . . . . .
449211 . . . . . . . . . . . . . .
449212 . . . . . . . . . . . . . .
449213 . . . . . . . . . . . . . .
449214 . . . . . . . . . . . . . .
449215 . . . . . . . . . . . . . .
449216 . . . . . . . . . . . . . .
449217 . . . . . . . . . . . . . .
449218 . . . . . . . . . . . . . .
449219 . . . . . . . . . . . . . .
449220 . . . . . . . . . . . . . .
449221 . . . . . . . . . . . . . .
449222 . . . . . . . . . . . . . .
449223 . . . . . . . . . . . . . .
449224 . . . . . . . . . . . . . .
449225 . . . . . . . . . . . . . .
449226 . . . . . . . . . . . . . .
449227 . . . . . . . . . . . . . .
449228 . . . . . . . . . . . . . .
449229 . . . . . . . . . . . . . .
449230 . . . . . . . . . . . . . .
449231 . . . . . . . . . . . . . .
449232 . . . . . . . . . . . . . .
449233 . . . . . . . . . . . . . .
449234 . . . . . . . . . . . . . .
449235 . . . . . . . . . . . . . .
449236 . . . . . . . . . . . . . .
449237 . . . . . . . . . . . . . .
449238 . . . . . . . . . . . . . .
449240 . . . . . . . . . . . . . .
449241 . . . . . . . . . . . . . .
449242 . . . . . . . . . . . . . .
449243 . . . . . . . . . . . . . .
449244 . . . . . . . . . . . . . .
449245 . . . . . . . . . . . . . .
449246 . . . . . . . . . . . . . .
449247 . . . . . . . . . . . . . .
449248 . . . . . . . . . . . . . .
449249 . . . . . . . . . . . . . .
449250 . . . . . . . . . . . . . .
449251 . . . . . . . . . . . . . .
449252 . . . . . . . . . . . . . .
449253 . . . . . . . . . . . . . .
449254 . . . . . . . . . . . . . .
449255 . . . . . . . . . . . . . .
449256 . . . . . . . . . . . . . .
449257 . . . . . . . . . . . . . .
449258 . . . . . . . . . . . . . .
449259 . . . . . . . . . . . . . .
449260 . . . . . . . . . . . . . .
449261 . . . . . . . . . . . . . .
449262 . . . . . . . . . . . . . .
449263 . . . . . . . . . . . . . .
449264 . . . . . . . . . . . . . .
449265 . . . . . . . . . . . . . .
449267 . . . . . . . . . . . . . .
449268 . . . . . . . . . . . . . .
449269 . . . . . . . . . . . . . .
449270 . . . . . . . . . . . . . .
449271 . . . . . . . . . . . . . .
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
Part No.
Page
449272 . . . . . . . . . . . . . .
449273 . . . . . . . . . . . . . .
449274 . . . . . . . . . . . . . .
449275 . . . . . . . . . . . . . .
449276 . . . . . . . . . . . . . .
449277 . . . . . . . . . . . . . .
449278 . . . . . . . . . . . . . .
449279 . . . . . . . . . . . . . .
449280 . . . . . . . . . . . . . .
449281 . . . . . . . . . . . . . .
449282 . . . . . . . . . . . . . .
449283 . . . . . . . . . . . . . .
449284 . . . . . . . . . . . . . .
449285 . . . . . . . . . . . . . .
449286 . . . . . . . . . . . . . .
449287 . . . . . . . . . . . . . .
449288 . . . . . . . . . . . . . .
449289 . . . . . . . . . . . . . .
449292 . . . . . . . . . . . . . .
449293 . . . . . . . . . . . . . .
449294 . . . . . . . . . . . . . .
449295 . . . . . . . . . . . . . .
449296 . . . . . . . . . . . . . .
449297 . . . . . . . . . . . . . .
449298 . . . . . . . . . . . . . .
449299 . . . . . . . . . . . . . .
449300 . . . . . . . . . . . . . .
449301 . . . . . . . . . . . . . .
449305 . . . . . . . . . . . . . .
449306 . . . . . . . . . . . . . .
449307 . . . . . . . . . . . . . .
449308 . . . . . . . . . . . . . .
449309 . . . . . . . . . . . . . .
449310 . . . . . . . . . . . . . .
449311 . . . . . . . . . . . . . .
449312 . . . . . . . . . . . . . .
449313 . . . . . . . . . . . . . .
449314 . . . . . . . . . . . . . .
449317 . . . . . . . . . . . . . .
449318 . . . . . . . . . . . . . .
449319 . . . . . . . . . . . . . .
449320 . . . . . . . . . . . . . .
449321 . . . . . . . . . . . . . .
449322 . . . . . . . . . . . . . .
449323 . . . . . . . . . . . . . .
449324 . . . . . . . . . . . . . .
449325 . . . . . . . . . . . . . .
449326 . . . . . . . . . . . . . .
449329 . . . . . . . . . . . . . .
449330 . . . . . . . . . . . . . .
449331 . . . . . . . . . . . . . .
449332 . . . . . . . . . . . . . .
449333 . . . . . . . . . . . . . .
449334 . . . . . . . . . . . . . .
449335 . . . . . . . . . . . . . .
449336 . . . . . . . . . . . . . .
449337 . . . . . . . . . . . . . .
449338 . . . . . . . . . . . . . .
449339 . . . . . . . . . . . . . .
449340 . . . . . . . . . . . . . .
449341 . . . . . . . . . . . . . .
INDEX-2
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
43
43
43
Part No.
Page
449342 . . . . . . . . . . . . . . 43
449343 . . . . . . . . . . . . . . 43
449344 . . . . . . . . . . . . . . 43
449345 . . . . . . . . . . . . . . 43
449346 . . . . . . . . . . . 43, 75
449347 . . . . . . . . . . . . . . 43
449348 . . . . . . . . . . . . . . 43
449349 . . . . . . . . . . . . . . 43
449350 . . . . . . . . . . . . . . 43
449351 . . . . . . . . . . . . . . 43
449352 . . . . . . . . . . . . . . 43
449353 . . . . . . . . . . . . . . 43
449354 . . . . . . . . . . . . . . 43
449355 . . . . . . . . . . . . . . 43
449356 . . . . . . . . . . . . . . 43
449357 . . . . . . . . . . . . . . 43
449358 . . . . . . . . . . . . . . 43
449359 . . . . . . . . . . . . . . 43
449360 . . . . . . . . . . . . . . 43
449361 . . . . . . . . . . . . . . 43
449362 . . . . . . . . . . . . . . 43
449363 . . . . . . . . . . . . . . 43
449364 . . . . . . . . . . . . . . 43
449365 . . . . . . . . . . . . . . 43
449366 . . . . . . . . . . . . . . 43
449367 . . . . . . . . . . . . . . 43
449368 . . . . . . . . . . . . . . 43
449369 . . . . . . . . . . . . . . 43
449370 . . . . . . . . . . . . . . 43
449371 . . . . . . . . . . . . . . 43
449372 . . . . . . . . . . . . . . 43
449373 . . . . . . . . . . . . . . 43
449374 . . . . . . . . . . . . . . 43
449375 . . . . . . . . . . . . . . 43
449376 . . . . . . . . . . . . . . 43
449377 . . . . . . . . . . . . . . 43
449378 . . . . . . . . . . . . . . 43
449379 . . . . . . . . . . . . . . 43
449380 . . . . . . . . . . . . . . 43
449381 . . . . . . . . . . . . . . 43
449382 . . . . . . . . . . . . . . 43
449383 . . . . . . . . . . . . . . 43
449384 . . . . . . . . . . . . . . 43
449385 . . . . . . . . . . . . . . 43
449386 . . . . . . . . . . . . . . 43
449387 . . . . . . . . . . . . . . 43
449388 . . . . . . . . . . . . . . 43
449389 . . . . . . . . . . . . . . 43
449390 . . . . . . . . . . . . . . 43
449391 . . . . . . . . . . . 43, 75
449392 . . . . . . . . . . . . . . 43
449393 . . . . . . . . . . . . . . 43
449394 . . . . . . . . . . . . . . 43
449395 . . . . . . . . . . . . . . 43
449396 . . . . . . . . . . . . . . 43
449397 . . . . . . . . . . . . . . 43
449398 . . . . . . . . . . . . . . 43
449399 . . . . . . . . . . . . . . 43
449400 . . . . . . . . . . . . . . 43
449401 . . . . . . . . . . . . . . 43
449402 . . . . . . . . . . . . . . 43
Page
449403 . . . . . . . . . . . . . .
449404 . . . . . . . . . . . . . .
449405 . . . . . . . . . . . . . .
449406 . . . . . . . . . . . . . .
449407 . . . . . . . . . . . . . . 449408 . . . . . . . . . . . . . . 449409 . . . . . . . . . . . . . .
449410 . . . . . . . . . . . . . .
449411 . . . . . . . . . . . . . .
449412 . . . . . . . . . . . . . .
449413 . . . . . . . . . . . . . .
449414 . . . . . . . . . . . . . .
449415 . . . . . . . . . . . . . . .
449416 . . . . . . . . . . . . . .
449417 . . . . . . . . . . . . . . .
449418 . . . . . . . . . . . . . .
449419 . . . . . . . . . . . . . .
449420 . . . . . . . . . . . . . .
449421 . . . . . . . . . . . . . .
449422 . . . . . . . . . . . . . . 449423 . . . . . . . . . . . . . .
449424 . . . . . . . . . . . . . . 449425 . . . . . . . . . . . . . .
449426 . . . . . . . . . . . . . .
449427 . . . . . . . . . . . . . .
449428 . . . . . . . . . . . . . .
449429 . . . . . . . . . . . . . . 449430 . . . . . . . . . . . . . . 449431 . . . . . . . . . . . . . . .
449432 . . . . . . . . . . . . . . 449433 . . . . . . . . . . . . . .
449434 . . . . . . . . . . . . . .
449437 . . . . . . . . . . . . . .
449438 . . . . . . . . . . . . . .
449439 . . . . . . . . . . . . . .
449440 . . . . . . . . . . . . . .
449441 . . . . . . . . . . . . . .
449442 . . . . . . . . . . . . . .
449443 . . . . . . . . . . . . . .
449444 . . . . . . . . . . . . . .
449445 . . . . . . . . . . . . . .
449446 . . . . . . . . . . . . . .
449449 . . . . . . . . . . . . . .
449450 . . . . . . . . . . . . . .
449451 . . . . . . . . . . . . . .
449452 . . . . . . . . . . . . . .
449453 . . . . . . . . . . . . . .
449454 . . . . . . . . . . . . . .
449455 . . . . . . . . . . . . . .
449456 . . . . . . . . . . . . . .
449457 . . . . . . . . . . . . . .
449458 . . . . . . . . . . . . . .
449461 . . . . . . . . . . . . . .
449462 . . . . . . . . . . . . . .
449463 . . . . . . . . . . . . . .
449464 . . . . . . . . . . . . . .
449465 . . . . . . . . . . . . . .
449466 . . . . . . . . . . . . . .
449467 . . . . . . . . . . . . . .
449468 . . . . . . . . . . . . . .
449469 . . . . . . . . . . . . . .
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
Part No.
Page
449470 . . . . . . . . . . . . . .
449473 . . . . . . . . . . . . . .
449474 . . . . . . . . . . . . . .
449475 . . . . . . . . . . . . . .
449476 . . . . . . . . . . . . . .
449477 . . . . . . . . . . . . . .
449478 . . . . . . . . . . . . . .
449479 . . . . . . . . . . . . . .
449480 . . . . . . . . . . . . . .
449481 . . . . . . . . . . . . . .
449482 . . . . . . . . . . . . . .
449483 . . . . . . . . . . . . . .
449484 . . . . . . . . . . . . . .
449485 . . . . . . . . . . . . . .
449486 . . . . . . . . . . . . . .
449487 . . . . . . . . . . . . . .
449488 . . . . . . . . . . . . . .
449489 . . . . . . . . . . . . . .
449490 . . . . . . . . . . . . . .
449491 . . . . . . . . . . . . . .
449492 . . . . . . . . . . . . . .
449493 . . . . . . . . . . . . . .
449494 . . . . . . . . . . . . . .
449495 . . . . . . . . . . . . . .
449496 . . . . . . . . . . . . . .
449497 . . . . . . . . . . . . . .
449498 . . . . . . . . . . . . . .
449499 . . . . . . . . . . . . . .
449500 . . . . . . . . . . . . . .
449501 . . . . . . . . . . . . . .
449502 . . . . . . . . . . . . . .
449504 . . . . . . . . . . . . . .
449506 . . . . . . . . . . . . . .
449507 . . . . . . . . . . . . . .
449508 . . . . . . . . . . . . . .
449509 . . . . . . . . . . . . . .
449510 . . . . . . . . . . . . . .
449511 . . . . . . . . . . . . . .
449512 . . . . . . . . . . . . . .
449513 . . . . . . . . . . . . . .
449514 . . . . . . . . . . . . . .
449515 . . . . . . . . . . . . . .
449516 . . . . . . . . . . . . . .
449517 . . . . . . . . . . . . . .
449518 . . . . . . . . . . . . . .
449519 . . . . . . . . . . . . . .
449520 . . . . . . . . . . . . . .
449521 . . . . . . . . . . . . . .
449522 . . . . . . . . . . . . . .
449523 . . . . . . . . . . . . . .
449524 . . . . . . . . . . . . . .
449525 . . . . . . . . . . . . . .
449526 . . . . . . . . . . . . . .
449527 . . . . . . . . . . . . . .
449528 . . . . . . . . . . . . . .
449529 . . . . . . . . . . . . . .
449530 . . . . . . . . . . . . . .
449531 . . . . . . . . . . . . . .
449532 . . . . . . . . . . . . . .
449533 . . . . . . . . . . . . . .
449534 . . . . . . . . . . . . . .
43
43
43
43
43
43
43
43
43
43
43
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
Part No.
Page
449535 . . . . . . . . . . . . . .
449536 . . . . . . . . . . . . . .
449537 . . . . . . . . . . . . . .
449538 . . . . . . . . . . . . . .
449539 . . . . . . . . . . . . . .
449540 . . . . . . . . . . . . . .
449541 . . . . . . . . . . . . . .
449542 . . . . . . . . . . . . . .
449543 . . . . . . . . . . . . . .
449544 . . . . . . . . . . . . . .
449545 . . . . . . . . . . . . . .
449546 . . . . . . . . . . . . . .
449547 . . . . . . . . . . . . . .
449548 . . . . . . . . . . . . . .
449549 . . . . . . . . . . . . . .
449550 . . . . . . . . . . . . . .
449551 . . . . . . . . . . . . . .
449552 . . . . . . . . . . . . . .
449553 . . . . . . . . . . . . . .
449554 . . . . . . . . . . . . . .
449555 . . . . . . . . . . . . . .
449556 . . . . . . . . . . . . . .
449557 . . . . . . . . . . . . . .
449558 . . . . . . . . . . . . . .
449559 . . . . . . . . . . . . . .
449560 . . . . . . . . . . . . . .
449561 . . . . . . . . . . . . . .
449562 . . . . . . . . . . . . . .
449563 . . . . . . . . . . . . . .
449564 . . . . . . . . . . . . . .
449565 . . . . . . . . . . . . . .
449566 . . . . . . . . . . . . . .
449567 . . . . . . . . . . . . . .
449568 . . . . . . . . . . . . . .
449569 . . . . . . . . . . . . . .
449570 . . . . . . . . . . . . . .
449571 . . . . . . . . . . . . . .
449572 . . . . . . . . . . . . . .
449573 . . . . . . . . . . . . . .
449574 . . . . . . . . . . . . . .
449575 . . . . . . . . . . . . . .
449576 . . . . . . . . . . . . . .
449577 . . . . . . . . . . . . . .
449578 . . . . . . . . . . . . . .
449579 . . . . . . . . . . . . . .
449580 . . . . . . . . . . . . . .
449583 . . . . . . . . . . . . . .
449584 . . . . . . . . . . . . . .
449585 . . . . . . . . . . . . . .
449586 . . . . . . . . . . . . . .
449587 . . . . . . . . . . . . . .
449588 . . . . . . . . . . . . . .
449589 . . . . . . . . . . . . . .
449590 . . . . . . . . . . . . . .
449591 . . . . . . . . . . . . . .
449592 . . . . . . . . . . . . . .
449595 . . . . . . . . . . . . . .
449596 . . . . . . . . . . . . . .
449597 . . . . . . . . . . . . . .
449598 . . . . . . . . . . . . . .
449599 . . . . . . . . . . . . . .
INDEX-3
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
Part No.
Page
449600 . . . . . . . . . . . . . .
449601 . . . . . . . . . . . . . .
449602 . . . . . . . . . . . . . .
449603 . . . . . . . . . . . . . .
449604 . . . . . . . . . . . . . .
449607 . . . . . . . . . . . . . .
449608 . . . . . . . . . . . . . .
449609 . . . . . . . . . . . . . .
449610 . . . . . . . . . . . . . .
449611 . . . . . . . . . . . . . .
449612 . . . . . . . . . . . . . .
449613 . . . . . . . . . . . . . .
449614 . . . . . . . . . . . . . .
449615 . . . . . . . . . . . . . .
449616 . . . . . . . . . . . . . .
449619 . . . . . . . . . . . . . .
449620 . . . . . . . . . . . . . .
449621 . . . . . . . . . . . . . .
449622 . . . . . . . . . . . . . .
449623 . . . . . . . . . . . . . .
449624 . . . . . . . . . . . . . .
449625 . . . . . . . . . . . . . .
449626 . . . . . . . . . . . . . .
449627 . . . . . . . . . . . . . .
449628 . . . . . . . . . . . . . .
449659 . . . . . . . . . . . . . .
449660 . . . . . . . . . . . . . .
449661 . . . . . . . . . . . . . .
449662 . . . . . . . . . . . . . .
449663 . . . . . . . . . . . . . .
449664 . . . . . . . . . . . . . .
449665 . . . . . . . . . . . . . .
449666 . . . . . . . . . . . . . .
449667 . . . . . . . . . . . . . .
449668 . . . . . . . . . . . . . .
449669 . . . . . . . . . . . . . .
449670 . . . . . . . . . . . . . .
449671 . . . . . . . . . . . . . .
449672 . . . . . . . . . . . . . .
449673 . . . . . . . . . . . . . .
449674 . . . . . . . . . . . . . .
449675 . . . . . . . . . . . . . .
449676 . . . . . . . . . . . . . .
449677 . . . . . . . . . . . . . .
449678 . . . . . . . . . . . . . .
449679 . . . . . . . . . . . . . .
449680 . . . . . . . . . . . . . .
449681 . . . . . . . . . . . . . .
449682 . . . . . . . . . . . . . .
449683 . . . . . . . . . . . . . .
449684 . . . . . . . . . . . . . .
449685 . . . . . . . . . . . . . .
449686 . . . . . . . . . . . . . .
449687 . . . . . . . . . . . . . .
449688 . . . . . . . . . . . . . .
449713 . . . . . . . . . . . . . .
449714 . . . . . . . . . . . . . .
449715 . . . . . . . . . . . . . .
449716 . . . . . . . . . . . . . .
449717 . . . . . . . . . . . . . .
449718 . . . . . . . . . . . . . .
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
Engineering/Technical
Part No.
Part Number Index
PART NUMBER INDEX
Engineering/Technical
PART NUMBER INDEX
Part No.
Page
Part Number Index
449719 . . . . . . . . . . . . . . 61
449720 . . . . . . . . . . . . . . 61
449721 . . . . . . . . . . . . . . 61
449722 . . . . . . . . . . . . 6, 61
449723 . . . . . . . . . . . . . . 61
449724 . . . . . . . . . . . . . . 61
449725 . . . . . . . . . . . . . . 61
449726 . . . . . . . . . . . . . . 61
449727 . . . . . . . . . . . . . . 61
449728 . . . . . . . . . . . . . . 61
449729 . . . . . . . . . . . . . . 61
449730 . . . . . . . . . . . . . . 61
449731 . . . . . . . . . . . . . . 61
449732 . . . . . . . . . . . . . . 61
449733 . . . . . . . . . . . . . . 61
449734 . . . . . . . . . . . . . . 61
449735 . . . . . . . . . . . . . . 61
449736 . . . . . . . . . . . . . . 61
449767 . . . . . . . . . . . . . . 65
449768 . . . . . . . . . . . . . . 65
449769 . . . . . . . . . . . . . . 65
449770 . . . . . . . . . . . . . . 65
449771 . . . . . . . . . . . . . . 65
449772 . . . . . . . . . . . . . . 65
449773 . . . . . . . . . . . . . . 65
449774 . . . . . . . . . . . . . . 65
449775 . . . . . . . . . . . . . . 65
449776 . . . . . . . . . . . . . . 65
449777 . . . . . . . . . . . . . . 65
449778 . . . . . . . . . . . . . . 65
449779 . . . . . . . . . . . . . . 65
449780 . . . . . . . . . . . . . . 65
449781 . . . . . . . . . . . . . . 65
449821 . . . . . . . . . . . . . . 65
449822 . . . . . . . . . . . . . . 65
449823 . . . . . . . . . . . . . . 65
449824 . . . . . . . . . . . . . . 65
449825 . . . . . . . . . . . . . . 65
449826 . . . . . . . . . . . . . . 65
449827 . . . . . . . . . . . . . . 65
449828 . . . . . . . . . . . . . . 65
449829 . . . . . . . . . . . 65, 75
449830 . . . . . . . . . . . . . . 65
449831 . . . . . . . . . . . . . . 65
449832 . . . . . . . . . . . . . . 65
449833 . . . . . . . . . . . . . . 65
449834 . . . . . . . . . . . . . . 65
449835 . . . . . . . . . . . . . . 65
449836 . . . . . . . . . . . . . . 65
449837 . . . . . . . . . . . . . . 65
449838 . . . . . . . . . . . . . . 65
449839 . . . . . . . . . . . . . . 65
449840 . . . . . . . . . . . . . . 65
449841 . . . . . . . . . . . . . . 65
449842 . . . . . . . . . . . . . . 65
449843 . . . . . . . . . . . . . . 65
449844 . . . . . . . . . . . . . . 65
449875 . . . . . . . . . . . . . . 69
449876 . . . . . . . . . . . . . . 69
449877 . . . . . . . . . . . . . . 69
449878 . . . . . . . . . . . . . . 69
Part No.
Page
449879 . . . . . . . . . . . . . . 69
449880 . . . . . . . . . . . . . . 69
449881 . . . . . . . . . . . . . . 69
449882 . . . . . . . . . . . . . . 69
449883 . . . . . . . . . . . . . . 69
449884 . . . . . . . . . . . . . . 69
449885 . . . . . . . . . . . . . . 69
449886 . . . . . . . . . . . . . . 69
449887 . . . . . . . . . . . . . . 69
449888 . . . . . . . . . . . . . . 69
449889 . . . . . . . . . . . . . . 69
449890 . . . . . . . . . . . . . . 69
449891 . . . . . . . . . . . . . . 69
449892 . . . . . . . . . . . . . . 69
449893 . . . . . . . . . . . . . . 69
449894 . . . . . . . . . . . . . . 69
449895 . . . . . . . . . . . . . . 69
449896 . . . . . . . . . . . . . . 69
449897 . . . . . . . . . . . . . . 69
449898 . . . . . . . . . . . . . . 69
449899 . . . . . . . . . . . . . . 69
449900 . . . . . . . . . . . . . . 69
449901 . . . . . . . . . . . . . . 69
449902 . . . . . . . . . . . . . . 69
449903 . . . . . . . . . . . . . . 69
449904 . . . . . . . . . . . . . . 69
449929 . . . . . . . . . . . . . . 69
449930 . . . . . . . . . . . . . . 69
449931 . . . . . . . . . . . . . . 69
449932 . . . . . . . . . . . . . . 69
449933 . . . . . . . . . . . . . . 69
449934 . . . . . . . . . . . . . . 69
449935 . . . . . . . . . . . . . . 69
449936 . . . . . . . . . . . . . . 69
449937 . . . . . . . . . . . . . . 69
449938 . . . . . . . . . . . . . . 69
449939 . . . . . . . . . . . . . . 69
449940 . . . . . . . . . . . . . . 69
449941 . . . . . . . . . . . . . . 69
449942 . . . . . . . . . . . . . . 69
449943 . . . . . . . . . . . . . . 69
449944 . . . . . . . . . . . . . . 69
449945 . . . . . . . . . . . . . . 69
449946 . . . . . . . . . . . . . . 69
449947 . . . . . . . . . . . . . . 69
449948 . . . . . . . . . . . . . . 69
449949 . . . . . . . . . . . . . . 69
449950 . . . . . . . . . . . . . . 69
449951 . . . . . . . . . . . . . . 69
449952 . . . . . . . . . . . . . . 69
451010 . . . . . . . . . . . . . . 26
451526 . . . . . . . . . . . 44, 75
452054 . . . . . . . . . . . . . . . 66
452055 . . . . . . . . . . . . . . 66
452097 . . . . . . . . . . . 66, 75
452287 . . . . . . . . . . . . . . . 17
453388 . . . . . . . . . . . . . . 62
453389 . . . . . . . . . . . . . . 62
453933 . . . . . . . . . . . . . . . 26
453954 . . . . . . . . . . . . 6, 62
453959 . . . . . . . . . . . . . . 62
Part No.
Page
454005 . . . . . . . . . . . . . . 17
454006 . . . . . . . . . . . . . . 17
454007 . . . . . . . . . . . . . . 17
454008 . . . . . . . . . . . . . . 26
454009 . . . . . . . . . . . . . . 26
454011 . . . . . . . . . . . . . . 35
454012 . . . . . . . . . . . . . . 35
454013 . . . . . . . . . . . . . . 35
454014 . . . . . . . . . . . . . . 44
454015 . . . . . . . . . . . . . . 44
454016 . . . . . . . . . . . . . . 53
454017 . . . . . . . . . . . . . . 53
454018 . . . . . . . . . . . . . . 53
454019 . . . . . . . . . . . . . . 66
454020 . . . . . . . . . . . . . . 66
454021 . . . . . . . . . . . . . . 70
454022 . . . . . . . . . . . . . . 70
454023 . . . . . . . . . . . . . . 44
454024 . . . . . . . . . . . . . . 44
454025 . . . . . . . . . . . . . . 44
454026 . . . . . . . . . . . . . . 53
454027 . . . . . . . . . . . . . . 53
454028 . . . . . . . . . . . . . . 53
454029 . . . . . . . . . . . . . . 62
454030 . . . . . . . . . . . . . . 70
454031 . . . . . . . . . . . . . . 70
454032 . . . . . . . . . . . . . . 70
454033 . . . . . . . . . . . . . . . 35
454044 . . . . . . . . . . . . . . 35
454045 . . . . . . . . . . . . . . 35
454046 . . . . . . . . . . . . . . 35
454047 . . . . . . . . . . . . . . 26
454048 . . . . . . . . . . . . . . 26
454049 . . . . . . . . . . . . . . 26
454062 . . . . . . . . . . . . . . . 24
454063 . . . . . . . . . . . . . . . 24
454064 . . . . . . . . . . . . . . . 24
454065 . . . . . . . . . . . . . . . 24
454066 . . . . . . . . . . . . . . . 24
454067 . . . . . . . . . . . . . . . 24
454068 . . . . . . . . . . . . . . . 24
454069 . . . . . . . . . . . . . . . 24
454070 . . . . . . . . . . . . . . . 24
454071 . . . . . . . . . . . . . . . 24
454072 . . . . . . . . . . . . . . . 24
454073 . . . . . . . . . . . . . . . 24
454074 . . . . . . . . . . . . . . . 24
454075 . . . . . . . . . . . . . . . 24
454076 . . . . . . . . . . . . . . . 24
454077 . . . . . . . . . . . . . . . 24
454078 . . . . . . . . . . . . 17, 24
454079 . . . . . . . . . . . . 17, 24
454080 . . . . . . . . . . . . . . 17
454081 . . . . . . . . . . . . . . . 33
454082 . . . . . . . . . . . . . . . 33
454083 . . . . . . . . . . . . . . . 33
454084 . . . . . . . . . . . . . . . 33
454085 . . . . . . . . . . . . . . . 33
454086 . . . . . . . . . . . . . . . 33
454087 . . . . . . . . . . . . . . . 33
454088 . . . . . . . . . . . . . . . 33
INDEX-4
Part No.
Page
454089 . . . . . . . . . . . . . . .
454090 . . . . . . . . . . . . . . .
454091 . . . . . . . . . . . . . . .
454092 . . . . . . . . . . . . . . .
454093 . . . . . . . . . . . . . . .
454094 . . . . . . . . . . . . . . .
454095 . . . . . . . . . . . . . . .
454099 . . . . . . . . . . . . . . .
454100 . . . . . . . . . . . . . . .
454101 . . . . . . . . . . . . . . .
454102 . . . . . . . . . . . . . . .
454103 . . . . . . . . . . . . . . .
454104 . . . . . . . . . . . . . . .
454105 . . . . . . . . . . . . . . .
454106 . . . . . . . . . . . . . . .
454107 . . . . . . . . . . . . . . .
454108 . . . . . . . . . . . . . . .
454109 . . . . . . . . . . . . . . .
454110 . . . . . . . . . . . . . . .
454114 . . . . . . . . . . . . . . .
454115 . . . . . . . . . . . . . . .
454116 . . . . . . . . . . . . . . .
454117 . . . . . . . . . . . . . . .
454118 . . . . . . . . . . . . . . .
454119 . . . . . . . . . . . . . . .
454120 . . . . . . . . . . . . . . .
454121 . . . . . . . . . . . . . . .
454122 . . . . . . . . . . . . . . .
454123 . . . . . . . . . . . . . . .
454124 . . . . . . . . . . . . . . .
454125 . . . . . . . . . . . . . . .
454126 . . . . . . . . . . . . . . .
454130 . . . . . . . . . . . . . . .
454131 . . . . . . . . . . . . . . .
454132 . . . . . . . . . . . . . . .
454133 . . . . . . . . . . . . . . .
454134 . . . . . . . . . . . . . . .
454135 . . . . . . . . . . . . . . .
454136 . . . . . . . . . . . . . . .
454137 . . . . . . . . . . . . . . .
454138 . . . . . . . . . . . . . . .
454139 . . . . . . . . . . . . . . .
454140 . . . . . . . . . . . . . . .
454198 . . . . . . . . . . . . . . .
454199 . . . . . . . . . . . . . . .
499782 . . . . . . . . . . . . . .
499783 . . . . . . . . . . . . . .
499784 . . . . . . . . . . . . . .
499785 . . . . . . . . . . . . . .
499786 . . . . . . . . . . . . . .
499787 . . . . . . . . . . . . . .
499788 . . . . . . . . . . . . . .
499789 . . . . . . . . . . . . . .
499790 . . . . . . . . . . . . . .
499791 . . . . . . . . . . . . . .
499792 . . . . . . . . . . . . . .
499793 . . . . . . . . . . . . . .
499794 . . . . . . . . . . . . . .
499795 . . . . . . . . . . . . . .
499796 . . . . . . . . . . . . . .
33
33
33
33
33
33
33
42
42
42
42
42
42
42
42
42
42
42
42
51
51
51
51
51
51
51
51
51
51
51
51
51
60
60
60
60
60
60
60
60
60
60
60
44
53
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
World Headquarters
P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Ph: (1) 479.646.4711, Fax (1) 479.648.5792, International Fax (1) 479.648.5895
Baldor - Dodge
6040 Ponders Court, Greenville, SC 29615-4617 U.S.A., Ph: (1) 864.297.4800, Fax: (1) 864.281.2433
© Baldor Electric Company
CA1610
www.baldor.com
All Rights Reserved. Printed in USA.
9/09 TCP 5,000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising