ems / police / fire products
EMS / POLICE / FIRE PRODUCTS
PROWLER LIGHTBARS............................................3
ODYSSEY LIGHTBARS.............................................4
MINI ODYSSEY..........................................................5
ROAD ALERT.............................................................6
MR LED LIGHTS........................................................7
LITEBRITE LED LIGHTS...........................................8
SURFACE MOUNT LED LIGHTS..............................9
COBRA LED LIGHTS.................................................9
SLED/SE/SX/XL/XMMAX LED LIGHTS..............10-11
LED MAPLIGHT........................................................11
TRAFFIC DIRECTORS............................................12
SWITCHRITE CONSOLES.................................13-17
CONSOLE MOUNTING PLATES.............................17
CONSOLE ACCESSORIES................................18-21
POWER OUTLETS.....................................18
ARMRESTS................................................19
CUPHOLDERS...........................................20
STORAGE POCKETS................................20
TICKET BOOK HOLDERS.........................21
LAPTOP MOUNTS.............................................21-23
Page 2
TABLE OF CONTENT
LAPTOP TRAYS..............................................24-25
COMPUTER POWER SUPPLY............................24
LIGHT & SIREN CONTROL SYSTEM.............26-28
RDS SERIES......................................26-27
INTIMIDATOR SERIES............................27
PROTEC 1300S.......................................28
ENFORCER.............................................28
CONTROL SYSTEMS..........................................29
PDU14K...................................................29
PDU42W..................................................29
WATCHDOG-B........................................29
FLASHERS...........................................................30
LED INSERT LIGHTS......................................30-31
SIREN SPEAKERS...............................................32
SPEAKER BRACKETS/ACCESSORIES..............32
EQUIPMENT TRAYS.......................................33-34
STORAGE SYSTEMS.....................................36-37
WINDOW BARS....................................................38
REAR WINDOW COVERS....................................38
ACCESSORIES.....................................................39
www.dandrelectronics.com
PROWLER LIGHTBARS
PROWLER LIGHTBARS
LIGHTBAR W/DEEP REFLECTOR LED MODULES
■ Prowler is our new generation lightbar that combines the best features
of LED technology.
■ Mounting kits available for most makes and models of vehicles.
■ Meets all applicable SAE Class 1 and California Title XIII when
properly configured
■ Can be controlled through any of the standard D&R and other
manufacturer’s switch packs or electronic light control systems
■ Perfect for all emergency vehicle applications
SPECIFICATIONS:
■ Material: Base - Strong Extruded aluminum frame UV treated
polycarbonate lens
■ Available sizes: L-22”/35”/ 46”/ 56”/ 66”/ 76”,
W-13.0”/ H-2.75” (w/o mnt. feet)
F UNCTIONS SUPPORTED :
■ 15 Selectable Flash Patterns
■ Dim mode for night use
■ Intersection Lights - (LED)
■ Front Flashers - (LED)
■ Rear Flashers - (LED)
■ Traffic Director - 6 or 8 outputs module configuration
www.dandrelectronics.com
Page 3
ODYSSEY
ODYSSEY INFO
■ The Odyssey LED sign is a compact
lightbar and arrowboard combination.
■ The retractable motorized arrowboard /
traffic director provides superior
visibility in a low profile configuration.
■ This patent design gives you the full
ODYSSEY
advantage of a 360-degree lightbar
when in lower position.
FEATURES:
FEATURES
■ GEN III LED technology
■ Low-profile (just 3” high) and ‘Easy
Swap’plug and play modules
■ Motorized for easy deployment
■ Compatible with our light & siren
controller or AS5500
■ Mounting kit included
■ Meets SAE Class1when properly
configured
TECHNICAL SPECS :
■ Finish: Powder coat
■ Colour: White / (Black is optional)
■ Material: Base-12ga aluminum / Sign-8ga aluminum
■ Dimensions: Sign Down: W-47 3/4”, D-28 1/4” / H-3.0”
Sign Up Raised height - 26 7/8”
■ Arrow Board: Total light modules - 24
Double Arrow Configuration - Yes
■ Functions Supported:
Left Arrow - Yes
Right Arrow - Yes
Centre Out - Yes
Flash Warning - Yes
■ Arrow Board Modules:
CF3*X-Cobra LED light
*X-colours:Amber, Blue, Clear, Red
Draw: 0.5 [email protected] per module
■ Lightbar Modules:
DR6-*X - Deep Reflector LED light
*X-available colours:Amber, Blue,
Clear, Red
Draw: 0.9 [email protected] per module
Page 4
www.dandrelectronics.com
MINI ODYSSEY
ODYSSEY II
TECHNICAL SPECS :
■ Finish: Enamel
■ Colour: White / (Black is optional)
■ Material: Base-12ga aluminum / Sign-8ga aluminum
■ Optional Road Alert designed in
■ Dimensions:Sign Down: W-47 3/4”, D-21 1/4” / H-3.0”
Sign Up Raised height - 19 7/8”
■ Arrow Board:
Total light modules - 16
Double Arrow Configuration - Yes
■ Functions Supported:
Left Arrow - Yes
Right Arrow - Yes
Centre Out - Yes
Flash Warning - Yes
■ Arrow Board Modules:
CF3*X-Cobra LED light
*X-available colours:Amber, Blue,
Clear, Red
Draw: 0.5 [email protected] per module
■ Lightbar Modules:
DR6-*X - Deep Reflector LED light
*X-available colours:Amber, Blue,
Clear, Red
Draw: 0.9 [email protected] per module
www.dandrelectronics.com
Page 5
ROAD ALERT MESSAGE SIGN
ROAD ALERT
Road Alert LED text message sign system,
displays text and symbolic information.
Solid state LED design ensures durability
against road shock and vibration providing
low maintenance and extended lifespan.
■ Fixed message - Yes
■ Scrolling message - Yes
■ Arrow messaging - Yes
■ Controller - RA-USB
■ Motorized (optional)
■ USB Interface
SPECIFICATION:
■ CPL (Characters/Line) - 8
■ LED rating - 100,000 hrs
■ External mount - Yes
■ Programmable messages - 80
■ Text messaging - Yes
■ Symbols - Yes
AVAILABLE COLOURS
LEDRA-A-20
LEDRA-A-40M (M-MOTORIZED, FOLD DOWN WHEN NOT IN USE
RA-USB
The controller supports maintenance of user messages using the Road Alert
Message Manager (RAMM) a Windows compatible software interface and
loading the message via USB thumb drive (memory stick), or by directly
connecting a USB keyboard.
Page 6
PRODUCT
WIDTH
HEIGHT
DEPTH
RA-USB
3.75”
2.25”
1.0”
LEDRA-X-20
20”
4.0”
2.5”
LEDRA-X-40
40”
4.0”
2.5”
www.dandrelectronics.com
LED LIGHTS
MR6 LED LIGHTS
FEATURES
■ MR6 LED modules utilize the latest
in 1W LED technology
■ Surface mount 6 LED flashing modules
■ Ideally suited for use in directional
warning solutions
■ These compact modules provide great
versatility for a wide range of mounting
options
■ All modules are sealed, waterproof for
external mounting applications
■ Multiple flash patterns built-in
■ Dimensions:
Length-3.25”, Width-1.25”, Depth-1.1”
■ Available models:
*** NEW
MR6x-X
x-Body Colour:
B-Black,W-White,C-Chrome
X-LED Colour:
A-Amber, B-Blue, C-Clear
■ Current Draw:
0.4A Solid ON
0.160A Average Pattern ON
■ Input Voltage:
12-24 VDC Nominal
■ Synchronous or alternate operation
PRODUCT ***
MR6B-X
AVAILABLE COLOURS
*** NEW PRODUCT ***
MR8B-R/B
■ Dual colour
■ 4 Red / 4 Blue Surface Flash Mount Module
■ Flashes all Red or all Blue
Available colours combination:
*** NEW PRODUCT ***
MR26-X
MR26-X FEATURES
■ MR26-X LED modules utilize the latest in 1W LED Technology
■ Surface mount 2 x 6 LED flashing stacked modules
■ Ideally suited for use in directional warning solutions
■ All modules are sealed for external mounting applications
■ Multiple flash patterns built-in
*** ALSO AVAILABLE IN DUAL COLOUR ***
MR6 - 2” BRACKETS
936-0397A
936-0398A
www.dandrelectronics.com
MR6 - 4” BRACKETS
936-0402A
936-0401A
Page 7
936-0400A
LED LIGHTS
LITEBRITE LED LIGHTS
LEDF-X*
■ Dimensions:
Length - 4.5” / Width - 2.0” / Depth - 2.2”
■ Amperage draw:
Amber, Red - 0.15 Amp
Blue, Clear, Green - 0.25 Amp
■ Number of GENII LED’s - 28
AVAILABLE COLOURS
LEDF-2X*
■ Dimensions:
Length - 8.5” / Width - 2.0” / Depth - 2.2”
■ Amperage draw:
Amber, Red - 0.15 Amp
Blue, Clear, Green - 0.25 Amp
■ Number of GENII LED’s - 56
AVAILABLE COLOURS
LEDF-3X*
■ Dimensions:
Length-12.5” / Width-2.0” / Depth-2.2”
■ Amperage draw:
Amber, Red - 0.15 Amp
Blue, Clear, Green - 0.25 Amp
■ Number of GENII LED’s - 84
AVAILABLE COLOURS
LEDF-4X*
■ Dimensions:
Length-17.0”/ Width-2.0”/ Depth-2.2”
■ Amperage draw:
Amber, Red - 0.15 Amp
Blue, Clear, Green - 0.25 Amp
■ Number of GENII LED’s - 112
■ Optional Suction Cup Mount available - part#: DR-SCMNT
AVAILABLE COLOURS
Page 8
www.dandrelectronics.com
LED LIGHTS
SURFACE MOUNT LED LIGHTS
■ Ideally suited for use as a directional warning solution
■ Versatility for a wide range of mounting options
■ Sealed, waterproof units for external mounting applications
■ Dimensions: L-4.25”,W-2.0”, D-0.75”
■ Multiple flash patterns built-in
■ Synchronous on alternate operation
AVAILABLE COLOURS
LBSF-X*
SURFACE LED MOUNTING BRACKETS
936-0302A
936-0324A
LBSF-X*-CHR (w/chrome finish bezel)
COBRA LIGHTS
Our Cobra LED lights, feature a light engine coupled with
a high-energy emitter utilizing a TIR (Total Internal Reflector).
Optical Technology uses a minimal energy source to operate.
Built-in flasher with 7 selectable flash patterns plus optional solid
pattern. Interior mounting lights.
AVAILABLE COLOURS
C6*X(D/W)
C53*X(D/W)
Dimensions:
Width - 4.5” / Height - 1.5” / Depth - 1.25”
Dimensions: Width - 7.625” / Height - 1.5” / Depth - 1.25”
C12*X(D/W)
Dimensions: ■ Width - ” / Height - 1.5” / Depth - 1.25”
COBRA WINDSHIELD LIGHTS
■ Designed to fit as a center mount above the rear view mirror
■ High visibility when activated
■ Low profile, lightweight
www.dandrelectronics.com
■ Extremely discrete and non-intrusive
■ W-3.8”/ H-1.3” / D-1.6”
Page 9
LED LIGHTS
SE SERIES LIGHTS
SE3-X
■ 3 High Intensity 1-Watt LEDs
■ Voltage: 12/24VDC
■ 11 Flash Patterns
■ Width-4.5”/Height-1.6”/Depth-0.8”
AVAILABLE COLOURS
SE4-X
■ 4 High Intensity 1-Watt LEDs
■ Voltage: 12/24VDC
■ 18 Flash Patterns
■ Width-5.75”/Height-1.6”/Depth-0.8”
AVAILABLE COLOURS
XS/XL/DXL SERIES LIGHTS
XS4-X
■ 4 High Intensity 1-Watt LEDs
■ Voltage: 12/24VDC
■ 11 Flash Patterns
■Dimensions:
Width-4.5”/Height-1.75”/Depth-0.8”
AVAILABLE COLOURS
XL6-X
■ 6 High Intensity 1-Watt LEDs
■ Voltage: 12/24VDC
■ Dimensions:
Width-6”/Height-2.3”/Depth-1.2”
■ 19 Flash Patterns
■ Current: 0.7 Amp Max
AVAILABLE COLOURS
DXLED12-X
■ 12 High Intensity 1-Watt LEDs
■ Voltage: 12/24VDC
■ Width-6.3”/Height-3.6”/Depth-1.18”
■ 12 Flash Patterns
■ Current: 1.3 Amp Max
■ Dual Colour Modules
AVAILABLE COLOURS
AVAILABLE IN SPLIT COLOURS
Page 10
www.dandrelectronics.com
LED LIGHTS
SLED/XS/SE/XL LIGHTS BRACKET
936-0364A
■ LED Light Bracket
■ Height - 2”
■ For SLED-04/XS4/SE3
936-0365A
■ LED Light Bracket
■ Height - 4”
■ For SLED-04/XS4/SE3
936-0384A
936-0379A
■ LED Light Bracket
■ Pushbumper bracket
■ For DXLED-12
■ LED Light Bracket
■ Height - 2”
■ For XL6
XMMAX LIGHTS SERIES
XMMAX06P
■ LED Dash Light
■ Voltage: 12/24VDC
■ 19 Flash Patterns
■ Current: 1.05 Amp Max
■ Six 1-Watt LEDs
■ Width-6”/ Height-2”
Bottom: 4.5” Deep
Top: 2 3/4” Deep
AVAILABLE COLOURS
XMMAX204P
■ LED Dash Light
■ Voltage: 12/24VDC
■ 26 Flash Patterns
■ Current: 0.5 Amp Max
■ Eight 1-Watt LEDs
■ Width-9.5”/ Height-1.5”
Bottom: 4.5” Deep
Top: 1.5” Deep
AVAILABLE COLOURS
LED MAPLIGHT
CA-0129 / CA-0130 /DUAL COLOUR
*** NEW PRODUCT ***
■ Available in:
12” and 18” lengths
■ 3 Phase light intensity 1Watt LED
■ Available in 12 / 24V
■ 280º Turning Radius
■ 1Watt Red and
White LED
■ Option: available
with UV LED
www.dandrelectronics.com
Page 11
TRAFFIC DIRECTORS
TRAFFIC DIRECTORS
■ Lite Brite Traffic Director is a traffic directing device.
■ A series of lights that direct traffic away from a particular
scene of either an accident or construction work.
■ Some models have the LED lights arranged in the shape of an
arrow on both sides.
■ Mounting on various locations including the back of a light bar
or the rear panel of a truck.
■ The large number of light emitting diodes used make the LED
Traffic Director easily visible from a very long distance.
■ Traffic Director Kit includes an AS5500 controller
(Built-in or External) and standard 20ft cable.
■ Optional cable lengths - 30ft, 40ft and 50ft.
■ Traffic Directors are also available with optional Photo
Dimmer Sensor
SPLIT TRAFFIC DIRECTORS
AVAILABLE COLOURS
LED-3/3TD-AEK
■ Dimensions (each side): W-12.5” / H-2.0” / D-2.2”
■ Weather Tight option add -WT to part number
LED-4/4TD-AEK
■ Dimensions (each side): W-17” / H-2.0” / D-2.2”
■ Weather Tight option add -WT to part number
8 MODULE TRAFFIC DIRECTORS
LED-848TD-AEK
■ Left, Right, Center Out and Flash
warning patterns
■ Light Intensity Dimmer
■ For Weather Tight option add
suffix-WT to a part number
■ Dimensions:
W-48.0”/ H-2.0”/ D-2.2”
AVAILABLE COLOURS
LED-848TD-AEK (w/printed arrow tips)
10 MODULE TRAFFIC DIRECTORS
LED-10TD-AEK
■ Left, Right, Center Out and Flash
warning patterns
■ Light Intensity Dimmer
■ For Weather Tight option add
suffix-WT to a part number
■ Dimensions:
W-42.5”/ H-2.0”/ D-2.2”
AVAILABLE COLOURS
LED-10TDT-AEK (w/printed arrow tips)
LINEAR LED MODULES
■ Dimensions:
W - 40” / H - 2.40” /
D - 3.13”
■ Max current less than 8A
when all modules ON
■ Number of modules - 8
■ Watertight, surface mount
■ External Control
■ Standard cable length: 20ft
■ Parabolic Linear Reflector
■ 6 LED’s per module
AVAILABLE COLOURS
TRAFFIC DIRECTORS CONTROLLERS
AS5500
AS55X2
OPERATES 2 ARROWSTICKS
AS5500 / AS55X2 Dimensions: ■ Width-4 3/16” ■ Height-2.5” ■ Depth-1.0”
Page 12
AS5500 / AS55X2 are compact control
panels for the operation of directional
Traffic Director manufactured by D&R.
Features include:
■ Left Arrow
■ Center Out Arrow
■ Right Arrow
■ Flash-(Inside-4/Outboard-2)
■ Light Intensity Dimmer.
AS55X2 is our new control panel for the
operation of two Traffic Directors mounted
on the vehicle (Front/Rear). Operates Dual
Traffic Director parallel or independently.
www.dandrelectronics.com
SWITCHRITE EQUIPMENT CONSOLES
CONSOLES
D&R Switchrite equipment consoles are available for many applications and offer all the features and qualities synonymous with D&R
products-robust, versatile and functional. Consoles come complete with
mounting holes for map lights, mic clips, interchangeable faceplates
and console accessories. All consoles can be used with computer
mounts. Easy installation and universal mounting among vehicles
(Ford, GM, Chrysler) results in added value and reduced costs as equipment adapts to the changing needs of fleets.
DODGE CHARGER CONSOLES
SRC14SA-CHR
■ Designed to fit a 2006+ Dodge Charger
■ 14” New console with optional swing
arm (LT7600) mounted on top
■ Allows for mounting up to 4 pieces of
remote head equipment
■ Floorplate not required to install this
console
SRCCHRGR-08A
SRC14SA-CHRGR
■ Designed to fit a 2008+ Dodge
Charger
■ Allows for mounting up to 5 pieces of
remote head equipment
■ Floorplate not required to install this
console
SRCCHRGR-08B
■ Designed to fit a 2008+ Dodge
Charger
■ Allows for mounting up to 6 pieces
of remote head equipment
■ Floorplate not required to install this
console
SRCCHRGR-08C
■ Designed to fit a 2008+ Dodge
Charger
■ Allows for mounting up to 4 pieces
of remote head equipment
■ Floorplate not required to install this
console
SRCCHRGR-08C
SRCCHRGR-06B
■ Designed to fit a 2008+ Dodge
Charger
■ Allows for mounting up to 6 pieces
of remote head equipment
■ Floorplate not required to install this
console
SRCIMP-06
CHEVY IMPALA CONSOLE
■ 19” console with contour slope
■ Allows for mounting up to 4 pieces of remote head equipment
■ Easy access to your control center
■ Designed to fit 2006-2009 Chevy Impala
■ Optional expansion box for rear of console available - part# 901-0033A
www.dandrelectronics.com
Page 13
SWITCHRITE EQUIPMENT CONSOLES
CONSOLES
FORD CROWN VIC CONSOLES
SRC10SA-FCV
■ 10” console with optional swing arm
(LT7600) mounted on top
■ Allows for mounting up to 3 pieces
of equipment
■ 3 accessory outlets on passenger side
SRC14SA-FCV
■ 14” console with optional swing
arm (LT7600) mounted on top
■ Allows for mounting up to 4 pieces
of equipment
■ 3 accessory outlets on passenger
side
SRC18SA-FCV
■ 18” console with optional swing
arm (LT7600) mounted on top
■ Allows for mounting up to 5
pieces of equipment
■ 3 accessory outlets on passenger
side
SRC19SA-FCV
■ 19” console with optional swing
arm (LT7600) mounted on top
■ Allows for mounting up to 5
pieces of equipment
■ 3 accessory outlets on passenger
side
CHEVY TAHOE CONSOLES
SRC18SA-TAH
■ 18” console with optional swing arm (LT7600) mounted on top
■ Allows for mounting up to 5 pieces of remote head equipment
■ 3 accessory outlets on passenger side
Page 14
www.dandrelectronics.com
SWITCHRITE EQUIPMENT CONSOLES
CONSOLES
LT7600
■ Dual 360 Deg. swivels allow the computer
to swing from the driver to the passenger
seat
■ LT7600 accepts all D&R computer
specific trays, universal trays and popular
keyboard trays
■ Tilt adjustment allows the user to tilt the
computer to a comfortable working
position
924-0242A
■ Console with Printer mount
■ Allows for mounting up to 3 pieces of equipment
Note: Printer not included
SRC7
■ 7” console popular for bench seat
vehicles, pickup trucks or undercover
vehicle applications
■ Allows for mounting up to 2 pieces
of equipment
■ Includes 2 faceplates
SRC9
■ 9” console with a 40 degree down slope
■ Allows for mounting up to 3 pieces of
equipment
■ Designed to fit close to the dash of a car
or SUV
■ Includes 3 faceplates
www.dandrelectronics.com
Page 15
SWITCHRITE EQUIPMENT CONSOLES
CONSOLES
SRC11S
■ Mid-sized console
■ Allows for mounting up to 3 pieces of
equipment
■ Designed to fit between the bucket and
bench seat configurations
■ Rear slope from front to back
■ Includes 3 faceplates
■ Available for Vans - model SRC11RV
(height increased by 4”, no slope)
SRC11SC
■ 11” console
■ Allows for mounting up to 3 pieces
of equipment
■ Designed to fit close to the dash of
a car or SUV
■ 40 degree down slope
■ Includes 3 faceplates
SRC14R
■ 14”console
■ Allows for mounting up to 4 pieces
of equipment
■ Includes 4 faceplates
■ Available for vans - model
SRC14RV
(height increases by 4”)
SRC14RS
■ 14” console
■ Allows for mounting up to
4 pieces of equipment
■ Front to rear sloped profile
■ Includes 4 faceplates
Page 16
www.dandrelectronics.com
SWITCHRITE EQUIPMENT CONSOLES
CONSOLES
SRC18R
■ 18” console
■ Allows for mounting up to
5 or 6 pieces of equipment
■ Includes faceplates
■ Designed to fit cars and
smaller SUV vehicles
SRCSUV
■ 18” console
■ This console allows for
mounting up to 5 or 6
pieces of equipment
■ Includes faceplates
■ Front to rear sloped profile
■ Designed to accommodate
larger sport utility vehicles
such as Tahoe, Suburban and
Expedition
■ Side compartment provides
storage space for clipboards
■ Two smaller pockets on side
of console to accommodate
accessories
■ Design allows for easy
equipment operation by both
driver and passenger
■ Model SRCSVR has no slope
CONSOLE MOUNTING PLATES
The floor plate kit uses D&R leg kit system which anchors to
factory seat bolts, eliminating the need for drilling holes in the
FLMNT-11
www.dandrelectronics.com
FLMNT-19
floor. This format provides versatility in mounting any combination of console and laptop mounts in different vehicle types.
FLMNT-29
Page 17
CONSOLE ACCESSORIES
FLOORPLATES & LEG KITS
FLMNT-29W
LEG KIT
Specify vehicle make and model at order point.
*** FOR LIST OF AVAILABLE FLOOR PLATES & LEG KITS, PLEASE CONTACT YOUR SALES REPRESENTATIVE***
POWER OUTLETS
CA-0102
CA-0101
■ Dual outlet 12V power accessory
■ Individually switched, fused and backlit
■ 15 Amp max per output
■ Triple outlet 12V power accessory with lighter plug
■ 15 Amp max per output
CA-0103
CA-0103S
■ Triple outlet 12V power accessory
■ Mounts in console.
■ Dimensions: Length - 8.0”, Width - 1.5”
Page 18
■ Triple outlet 12V power accessory
■ Mounts in console.
■ Dimensions: Length - 8.0”, Width - 3.5”
www.dandrelectronics.com
CONSOLE ACCESSORIES
ARMRESTS
CA-0110
■ Adjustable armrest
■ Mounts to rear of console
CA-0119
CA-0111
■ Adjustable armrest with slide-out
note pad
■ Mounts to rear of console
CA-0118
■ Adjustable armrest w/slide-out note pad
■ Secures to equipment floor mounting
plate
904-0122A
CA-0124
*** NEW ***
■ Adjustable armrest
■ Secures to equipment floor mounting
plate
■ Adjustable armrest with the rear
mounted clip board holder
■ Mounts to rear of console
CA-0211
■ Printer Armrest designed to enclose and protect
the PJ200 printer & paper spool.
■ Compact and ideally suited to mount in the
confined space between the driver and passenger seats of all mid and full sized vehicles.
■ CA-0210 is same as CA-0211 but mounts to the
back of the D&R console.
Printer not included.
www.dandrelectronics.com
Page 19
CONSOLE ACCESSORIES
CUPHOLDERS
CA-0106
CA-0107LS
CA-0107
■ Dual cupholder w/clipboard holder
compartment
■ Mounts to rear of console
■ Dimensions: L-5.54” / W-8.43”
■ Dual cupholder (regular cup size)
■ Mounts in console
■ Dimensions: L-3.5” / W-8.0”
■ Dual cupholder (one regular size cup
and one large cup)
■ Mounts in console
■ Dimensions: L-4.25” / W-8.0”
CA-0117L
CA-0117
■ Dual cupholder (regular cup size)
■ Mounts to floor plate or flat surface
■ Dimensions: L-4.88” / W-8.0”
■ Dual cupholder with two large cups
■ Mounts to floor plate or flat surface
■ Dimensions: L-5.69” / W-8.56”
STORAGE POCKETS
CA-0104
CA-0104S
CA-0104M1
■ Ticket book holder
■ Design to mount in console
■ Dimensions: L-3.5” / W-8.0” / H-6.25”
■ Ticket book holder
■ Design to mount in console
■ Dimensions: L-3.5” / W-8.0” / H-3.0”
■ Ticket book holder
■ Design to mount in console
■ Dimensions: L-7.0” / W-8.0” / H-6.25”
Page 20
www.dandrelectronics.com
CONSOLE ACCESSORIES / LAPTOP MOUNTS
TICKET BOOK HOLDERS
CA-0105S
CA-0105
■ Ticket book holder with
keyed locking lid
■ Design to mount in console
■ Dimensions:
L-3.5” / W-8.0” / H-6.0”
■ Ticket book holder with
keyed locking lid
■ Design to mount in console
■ Dimensions:
L-3.5” / W-8.0” / H-3.0”
CA-0105M1
CA-0105M2
■ Ticket book holder with
keyed locking lid
■ Design to mount in console
■ Dimensions:
L-7.0” / W-8.0” / H-6.25”
■ Ticket book holder with
keyed locking lid
■ Design to mount in console
■ Dimensions:
L-10.5” / W-8.0”/ H-6.25”
LAPTOP MOUNTS
LT5100
■ Laptop mount with bearing detent swivel, 80
degrees to passenger and driver
■ The mount raises from 6.5” to 10” utilizing
telescoping tubing w/heavy duty clamp lever
■ Built-in slide tray with four 1.5” increments
■ Air Bag compatible (in lower position)
■ Laptop Tray / Docking Station optional
■ Optional: available with Tilt Adapter Plate
part #: 907-0175A
LT5200
■ Telescoping laptop mount with adjustable mount base
■ Ball bearing detent swivel base allows for 80 degrees
swivel to both passenger and driver
■ Angled, spring loaded telescoping riser lets mount
height be adjusted from 6.5” to 11.5”
■ Built-in slide tray with four 1.5” increments
■ Air Bag compatible (in lowered position)
■ Laptop Tray / Docking Station optional
■ Optional: available with Tilt Adapter Plate
part#: 907-0175A
www.dandrelectronics.com
Page 21
LAPTOP MOUNTS
LAPTOP MOUNTS
LT5201
■ Telescoping laptop mount with adjustable mount
base
■ Ball bearing detent swivel base allows for
80 degrees swivel to both passenger and driver
■ Angled, spring loaded telescoping riser lets mount
height be adjusted from 10.5” to 17”
■ Built-in slide tray with four 1.5” increments
■ Laptop Tray / Docking Station optional
■ For use with larger SUV’s
■ Optional: available with Tilt Adapter Plate
part#: 907-0175A
907-0175A
■ Tilt Adapter for laptop mounts
■ Compatible with all D&R
Electronics laptop models
LT6100
■ Table-top laptop base with
tension swivel, slide-track tray
■ Constructed from lightweight
aluminum material
■ Dimensions:
W-11 1/7”, D-5 3/4”, H-1 1/2”
■ Laptop Tray / Docking Station
optional
■ Optional tilt adapter plate
LT5800
SEAT-TOP
LAPTOP MOUNT
Comes with:
■ Tension swivel
■ Slide track
■ Cup holder
■ Two 12 volt outlet
Page 22
www.dandrelectronics.com
LAPTOP MOUNTS
LAPTOP MOUNTS
■ LT6600 Passenger Side Mount
connects to the passenger seat bolts
■ Full featured computer mount with
height, tilt, dual 360 swivel and
extension adjustments
■ Utilizes laser cut swivel components to
provide a compact unit ideal for small
to full size cars and SUV’s
■ The LT6600 accepts all D&R laptop or
MDT specific trays and universal trays
FUNCTIONALITY:
■ Height Adjustment: height can be set
by the user:
LT6600-A,C from 13.5”- 21.50”
LT6600-B
LT6600-A
LT6600-B from 17.50”- 30.00”
LT6600-E from 9.5”- 13.5”
LT6600-F,G,K from 21.5”- 37.00”
■ Extension Adjustment: this adjustment
allows the user to tilt move the
computer towards or away from their
reach to a comfortable working
position (12”-16”)
■ Mounting Kit: Various kits are
available depending on the make,
model and year
■ All mounts include braces for mount
support
LT6600-C
LT6600-F
906-0120A
■ Coban Side Mount
■ Standard post works with all LT6600 mounting bases
www.dandrelectronics.com
Page 23
LAPTOP TRAYS
UNIVERSAL TRAYS
907-0039
*** D&R OFFERS LOCKING TRAYS FOR SPECIFIC LAPTOP COMPUTERS. CONTACT YOUR LOCAL
SALES REPRESENTATIVE FOR DETAILS ***
■ Universal laptop tray designed to hold up 95% of all available
laptop computers
■ Uses side mount fingers to secure the laptop in place
■ The tray is adjusted to fit the laptop and tightened when
properly adjusted
■ Available for 14+ sized laptops (Part# 907-0072)
907-0103B
■ Universal locking tray with thin finger
■ Ability to lock the laptop in place using a key lock
■ Uses side mount fingers to secure the laptop in place
■ The tray is adjusted to fit the laptop and tightened
when properly adjusted
■ Available for 14+ sized laptops (Part# 907-0151C)
■ Available for small sized laptops 10”-12”(Part# 907-0236A)
PORT REPLICATORS
PANCF30/PANCF31
*** FOR LIST OF AVAILABLE DOCKING STATIONS,
PLEASE CONTACT YOUR SALES REPRESENTATIVE ***
■ Rugged steel and aluminum with a black powder coated finish
■ Lockable keyed alike or optional master keyed
■ Pre-drilled holes aligned for use on all D&R model type mounts
CF-19
■ Rugged steel with black powder coat finish
■ Lockable keyed alike
■ Fan cooling for laptop bottom
■ Pre-drilled holes aligned for use on all D&R mounts
COMPUTER POWER SUPPLY
DS100-15.6
■ 15.6 VDC Computer DC to DC Power Supply
■ Compact Size: L-6.0”, W-2.5”, H-1.0”
■ Maximum power consumption <90W
■ Output short circuit protection with current and voltage fold-back.
■ Output and Input Over-Voltage protection - Output is disconnected under these conditions
■ Wide input voltage operation - negative GND
■ Excellent Line regulation over the whole input voltage range
■ RED Power ON LED indicator
■ Non-Isolated DC/DC converter, the Input ground is carried through to Output ground
Page 24
www.dandrelectronics.com
LAPTOP TRAYS / DOCKING STATIONS
LAPTOP TRAYS
907-0221A
CF-19 DOCKING STATION AND PRDC KEYBOARD
907-0073B
DATA911 SCREEN HOLDER AND KEYBOARD TRAY
FCV MOBILE WORK STATION
www.dandrelectronics.com
Page 25
LIGHT & SIREN CONTROL SYSTEMS
RDS SERIES
SPECIFICATIONS:
■ Operating Current - 10Amps
■ Frequency Range - 700 to 1640Hz
(nominal)
■ Input Voltage: 11 to 16 Volts DC
■ Operating Temperature Ranges:
RDS
-30˚C to +65˚C
■ Standby Current: 50mA ± 10%
■ Cycle Rate: Wail - 17 cycles/min
Yelp - 230 cycles/min
Stinger - 1000 cycles/min
■ Nominal Voltage Output:
52V p-p (11Ω load)
■ Audio Frequency Response:
100-4000 Hz ± 3dB
■ Audio Distortion: 10% or less
■ Audio Power - 32 watt
■ Input Impedance - 600Ω
RDS
RDS DIMENSIONS
■ A compact full feature siren/relay module
■ 9 controlled outputs:
[email protected], and [email protected]
■ All control outputs are solid state relays
■ Radio re-broadcasting
■ Standard siren tones
■ Park Kill
■ Operates one or two 100W speakers
■ The touchpad includes a 4 position
slide switch, 12 illuminated push
button switches
■ Traffic Advisor indicator (data to be
used with D&R Advisor only)
H - 2.45”
W - 6.66”
D - 6.44”
D (w/touchpad) - 7.42”
Meets SAE J1849
RDS-RK
Same as RDS but with remote touchpad
RDS DIMENSIONS
Main Unit:
■ Height - 2.45”
■ Width - 6.66”
■ Depth - 6.44”
Meets SAE J1849
RDS 16 S
RDS 16 S
■ Light & Siren control with full
feature siren
■ 14 controlled outputs:
3 @ 20Amps, 11 @ 10Amps
■ Radio re-broadcasting
■ Park Kill
■ All control outputs are solid state
relays
■ The touchpad includes 16 illuminated
push button switches
■ Traffic control indicator (data to be
used with D&R advisor only)
■ Operates one or two 100W speakers
Page 26
RDS 16 DIMENSIONS
Main Unit:
■ H - 3.50”
■ W - 7.75”
■ D - 5.87”
Width (extended chassis) - 9.37”
RDS 16 AS
■ Similar to the RDS 16 plus the
Traffic Advisor
Meets SAE J1849
www.dandrelectronics.com
LIGHT & SIREN CONTROLLERS
RDS SERIES
RDS17S
■ Traffic advisor indicator
(data to be used with D&R
advisor only)
RDS17S
■ Light & Siren control with full
feature siren.
■ 14 controlled outputs:
[email protected], [email protected]
■ Radio re-broadcasting
■ All control outputs are solid state
relays
■ Park Kill
■ Operates one or two 100W speakers
■ The touchpad includes 4 position
slide switch, 14 illuminated push
button switches
RDS17AS
■ Same as RDS-17 plus
the Traffic Advisor
■ Meets SAE J1849
INTIMIDATOR SERIES
INTIMIDATOR SPECS
■ Selectable setting for flash pattern
■ Input Voltage: 11 to 16 Volts DC
■ Operation Temperature Ranges:
-30˚C to +65˚C
■ Standby Current: 0.05mA ± 10%
■ Frequency Range: 700 to 1640 Hz
■ Cycle rate: Wail - 17 cycles/min
Yelp - 230 cycles/min
Stinger - 1000 cycles/min
■ Nominal Voltage Output: 52 Volts peak
to peak (with 11Ω load)
■ Audio Response:
100-4000 Hz ± 3dB
SIREN SPECS
■ Operating Current: 10Amps
F3.3000S
■ Full feature light and siren
control system
■ All control outputs are solid
state relays
■ 14 controlled outputs:
[email protected], [email protected]
■ Radio re-broadcasting
■ Park Kill
■ Operates one or two 100W
speakers
■ The touchpad includes 21
illuminated push button
switches
F3.3100S
■ Full feature light & siren control
system w/4 position slide switch
■ All control outputs are solid
state relays
■ 14 controlled outputs:
[email protected], 11 @ 10Amps
■ Radio re-broadcasting
■ Standard siren tones
■ Park Kill
■ Operates one or two 100W
speakers
■ Audio Power: 32 Watt
■ Input Impedance:600Ω (Radio)
■ Meets SAE J1849
DIMENSIONS
Main Unit: ■ Height - 3.50”
■ Width - 7.75”
■ Depth - 5.87”
F3.3000S
■ Traffic Advisor indicator
(data to be used with D&R
Traffic Advisors only)
F3.3050S
■ Same as F3.3000 plus Traffic
Advisor output build in
F3.3100S
F3.3150S
■ Same as F3.3100 plus Traffic
Advisor output build in
www.dandrelectronics.com
Page 27
LIGHT & SIREN CONTROL SYSTEMS
PROTEC 1300S
Features
■ Hand held light & siren
controller with built in PA
Microphone
■ Standard Siren tones
■ Fully Backlit
■ Radio re-broadcasting
■ Park Kill
■ 9 Controlled outputs:
[email protected] Amps
[email protected] Amps
■ All control outputs are solid
state relays
■ Available in 12V or 24V
operating voltages
■ Operates one or two 100W
speakers
■ Input Voltage:
11 to 16 Volts DC
■ Operation Temperature
Ranges: -30˚C to +65˚c
■ Standby Current:
0.05mA ± 10%
■ Meets SAE J1849
Physical Dimension
Main Unit:
■ Height - 2.45”
■ Width - 6.66”
■ Depth - 6.44”
Touchpad:
■ Height - 4.43”
■ Width - 2.375”
■ Depth - 1.00”
ENFORCER - ES6000
Features
■ Full feature electronic siren
with standard air horn
■ Eight siren functions assigned
to push button switches
■ Radio re-broadcasting
■ Park Kill
■ Push buttons are back-lit for
night time use
■ Operates one or two 100W
speakers
■ Plug in noise canceling
microphone
■ Available in 12V or 24V
operating voltage
General Specifications
■ Input Voltage:
11 to 16 Volts DC
■ Operating Current:
10 Amps
■ Operation Temperature
Ranges: -30ºC to +65ºC
■ Standby Current:
0.05mA ± 10%
■ Dimensions:
Height - 2.5”
Width - 6.66”
Depth - 7.5”
ENFORCER - ES6200
■ Self contained undercover
siren
■ Three tone: Wail, Yelp and
Air horn
■ Operates one or two 100W
speakers
■ Park Kill
Page 28
■ Dimensions:
Height - 2.5”
Width - 6.66”
Depth - 6.5”
ES6200 Control Box:
Height - 1.5”
Width - 3.5”
Depth - 2.5”
www.dandrelectronics.com
POWER DISTRIBUTION UNITS / WATCHDOG
POWER DISTRIBUTION UNITS
The Power Distribution Unit is a compact and
convenient point of load power distribution
product for installed electrical devices. By
using this device and carefully planning the
distribution of mobile equipment power feeds,
complex independent wire runs and unreliable
fuse panel connections can be avoided.
Each circuit can be individually fused further
reducing risk of damage to devices from circuit
overload.
Specifications:
■ Power Input:
1- 6 AWG +12V
1 - 6 AWG Ground
1- 18 AWG Ignition Control Input
■ Power Output
1 - 10 AWG @ 20A Max +12V (fused at 30A)
1 - 10 AWG Ground
■ Terminal Block Power Outputs
● 7 Ignition Controlled Power 40A relay (all combined output
power not exceed 30A max.)
● 7 Continuous Power: the total current not to exceed 40A
■ Organizes vehicle wiring runs
■ All power connections at one
central location
■ Provides direct power, ignition
power and timed power
■ Easy installation, easy connection
of accessory equipment
●6
Ground return path for the Output terminal blocks the
total return current not exceed 40A
PDU42W
■ Visual condition of circuits
■ Make a safer electrical connection
to vehicles
■ Built in Watchdog
(battery discharge protector)
■ Fast and reliable vehicle
installations
Specifications:
■ Power Input:
1- 6 AWG +12V @ 60A max input current
1 - 6 AWG Ground
1- 18 AWG Ignition Control Input
■ Power Output (High Current Connection)
1 - 8 AWG @ 30A Max +12V (fused at 50A)
1 - 8 AWG Ground
■ Terminal Block Power Outputs
● 6 Ignition Controlled Power 70A relay the total current not
to exceed 40A max.)
PDU14-K
●6
●5
Continuous Power: the total current not to exceed 60A
Ground return path for the Output terminal blocks the
total return current not exceed 60A
WATCHDOG-B
This unit is designed to protect the car
battery from excessive discharge,
when the ignition is off. Between 13
to 18V the output of the Watchdog
will be ON unconditionally. If the
battery voltage drops below 13V and
the ignition is OFF, the watchdog will
commence a predetermined countdown delay at the end of which the
unit will shut-off and go into
“STANDBY” mode. This delay is set
by the 4 DIP switches on the watchdog.
www.dandrelectronics.com
If the battery voltage recovers and is
raised above 13V, the countdown
process will cease and the Watchdog
will go into “ON” mode. The delay
time is set by the DIP switch and
depending on the DIP switch settings,
the car loads connected to this unit’s
output will run for the set time even
after the ignition is turned off.
Page 29
FLASHERS / LED INSERT LIGHTS
FLASHERS
FS2000
FS2100-S
FS2200-S
Basic general purpose relay
flasher. 16 Amp/100W
General purpose solid state
flasher. 16 Amp/100W
FS2600-S
Multi-mode solid state
headlight flasher. DRL
compatible
Tail light flasher. Flashes tail
lights against reverse light.
Includes brake/tail light
blackout mode.
ANTI-THEFT MODULE
FPC-4N
FS2900-FCV-09
Electronic Anti-Theft module,
permits the removal of ignition key
while the engine continues to run.
LED Flasher Module, 4-out for
negative Ground switching.
Ford Crown Vic solid state
headlight flasher, w/automotive
plug-in connector.
LED INSERT LIGHTS
L12P-X
■ Safe low voltage wiring
■ True Wide-angle light source,
no dead spots, no aiming
■ Encapsulated for moisture
and vibration resistance
■ No high voltage power supplies
FEATURES:
■ Die-cast aluminum base
■ Small 1” mounting hole
■ Compact controller and
synchronization units
■ Weather Resistant Cables
■ Available Flashers:
LEDSPS2-2, LEDSPS2-4AB
■ 5 selectable flash patterns
■ L12P LED Insert
■ Input Voltage: +10 to +18Vdc
Polarity Protected
■ Input Current: 1.0 Amp Max
■ Weather Resistant
Standard Cables
LEDCP-15 / 15’ Cable
LEDCP-25 / 25’ Cable
Custom Cables
Lengths:10’, 35’, 45’
■ LED Elements - 12
■ Flash Patterns - 5
■ Dimensions:
Height (Incl. Base)-1.25”
Base Diameter - 1.50”
Lens Diameter - 1.00”
■ Available in split colours
AVAILABLE COLOURS
Page 30
www.dandrelectronics.com
LED INSERT LIGHTS
LED INSERT LIGHTS
■ LL12P LED Insert
■ Input Voltage: +10 to +18Vdc Polarity Protected
■ Input Current: 1.25 Amp Max
■ Weather Resistant Cables
■ LED Elements - 12
■ Flash Patterns - 5
LL12P-X
■ Dimensions:
Height (Incl. Base)-1.75”
Base Diameter - 1.50”
Lens Diameter - 0.9”
AVAILABLE COLOURS
LED INSERTS - FLASHERS & CABLES
LEDSPS2-4AB (4 OUTPUTS)
LEDCP-X
Dimensions: L-4.8”/ W-3.55” /
H-1.35”(w/connectors)
LEDSPS2-2 (2 OUTPUTS)
Dimensions: L-4.8”/ W-3.55” /
H-1.35”(w/connectors)
LED INSERTS - L12I
■ L12I LED Insert
■ LED Elements - 12
■ Lamp and In-line flasher are fully encapsulated
for moisture and vibration resistance
■ Ultra small
■ Includes synchronize feature for alternating and
synchronous flashing of multiple lamps
*** NEW PRODUCT ***
AVAILABLE COLOURS
www.dandrelectronics.com
Page 31
SIREN SPEAKERS
SIREN SPEAKERS
DRCS100
DR100R
DRZ100
One of our most innovative 100 Watt
speakers. Available with a great
selection of brackets for popular vehicles
Class A - SAE approved.
Dimensions: W-6.5”, H-5.375”, D-3.0”
One of our most compact 100 Watt
speakers, comes with 6” diameter bell
designed to mount on motorcycles or
vehicles with limited space
Class A - SAE approved.
Dimensions: W-6.0”, H-6.0”, D-5.5”
This speaker is popular for concealed
installation under the hood, the fender
well or behind the grille.
Class A - SAE approved.
Dimensions: W-8.0”, H-5.25”, D-6.0”
DRCS100 SPEAKER BRACKETS
DRIMPLA-06
DRCHRGR-06
DREXP07
DRCVS06
Bracket for use in 2006+
Chevy Impala
Bracket for use in 2006+
Dodge Charger
Bracket for use in 2006+
Ford Expedition
Bracket for use in 2006+
Ford Crown Vic
SPEAKER ACCESSORIES
DR5162
DR1015
DR11D
Standard speaker mounting bracket
ABS square bell (Black)
100-watt speaker driver
DR325STR
DR10VC
DR6BRBAL
Short speaker tip
100-watt voice coil
6-inch aluminum round bell.
Available in brushed aluminum.
Page 32
www.dandrelectronics.com
EQUIPMENT TRAYS
EQUIPMENT TRAYS
Full width trunk equipment tray made from 10-gauge aluminum that slides out for easy equipment placement and maintenance.
Spare tire must be removed or relocated to trunk floor. The front is protected with a perforated aluminum panel.
ST04 - FORD CROWN VIC
* COMING SOON FOR 2011 FORD INTERCEPTION *
ST05-CHRGR-08B
SHOWN WITH SPARE TIRE TRAY (932-0008A)
* COMING SOON FOR 2011 DODGE CHARGER *
* COMING SOON FOR 2011 CHEVY CAPRICE *
ST05-IMP-06
932-0011A
■ Trunk Electronic Mount Door for Dodge
Charger
■ 932-0011A - to mount on Driver Side
■ 932-0011B - to mount on Passenger Side
www.dandrelectronics.com
Page 33
EQUIPMENT TRAYS
SB02
932-0005A
Electronic Storage Box with dual opening
Trunk Mounted
Radio Shelf
SB03
Slide out electronics storage mounting unit for trunk. Mounts in upper trunk deck
area beside the spare tire. Designed to hold up to 75lbs. Secures to the rear seat back
and bottom of upper parcel shelf. Front face panel provides added equipment
protection.
Mounting Area Size: ■ Width - 13.60” / ■ Depth - 19.00”
SB04 SERIES
Aluminum storage box complete with plexi-glass latching cover. This 10-gauge aluminum storage box is ideal for mounting in the trunk
sides of automobiles or rear cargo section of sport utility vehicles. This storage unit would be well suited for storage of road side
flares, small tools, etc...
Available for Ford Crown Vic, Chevy Impala and Dodge Charger.
SB04
SB04-12
* COMING SOON FOR
2011 FORD INTERCEPTION,
2011 CHEVY CAPRICE AND
2011 DODGE CHARGER *
Dimensions: ■ Width - 18.00” / ■ Height - 14”
Dimensions: ■ Width - 12.00” / ■ Height - 14”
BATTERY BOX
Battery Box for Optima
Batteries
Page 34
www.dandrelectronics.com
STORAGE SYSTEMS
STORAGE SYSTEMS
■ Maximize/Organize space while protecting your valuables
■ Locking slide-out drawers give quick and easy access
■ Flexible and affordable storage solution for Emergency,
Enforcement and Utility Vehicles
■ Lightweight aluminum welded construction to reduce vehicle load
■ Reinforced base and top supports heavy loads
■ Finished in a hard black epoxy paint will not rust
■ Heavy duty paddle lock and large handle
■ Heavy duty ball bearing slides for smooth operation
■ Tie-down points around top of cabinet for securing extra load
■ Dividers and partitions allow easy re-configuration of
compartments
*** CONTACT YOUR SALES REPRESENTATIVE FOR YOUR CUSTOM IN-VEHICLE
STORAGE SYSTEM OR REQUEST A CD WITH OUR FULL LINE STORAGE DESIGNS ***
TS-01
WEIGHT LBS (kg)
WIDTH
HEIGHT
LENGTH
PART #
100 (45.0)
48” (44.24”)
12” (9.25”)
28.75” (22.5”)
TS-01-26
120 (54.5)
45” (41.25”)
12” (9.25”)
36.75” (30.5”)
TS-01-34S
130 (59.1)
48” (44.25”)
12” (9.25”)
36.75” (30.5”)
TS-01-34
150 (68.2)
48” (44.25”)
12” (9.25”)
44.75” (38.5”)
TS-01-42
*Dimensions above do not include 1” lid on top of cabinet
() Inside dimensions shown in brackets with all dividers removed
Available for :
■ SUVs and Vans
■ Ford Excursion
■ Ford Expedition
■ Chevy Suburban
■ Chevy Tahoe
■ Dodge Durango
934-0386A
934-0315A
2019 -”E” TRACKS
F06018 - CARGO STRAPS
www.dandrelectronics.com
Page 35
STORAGE SYSTEM
934-0383A COMMAND SYSTEM
W/SIMPLEX LOCK
W/PADDLE LOCK
934-0253A ALB STORAGE SYSTEM
DRAWER STORAGE SYSTEMS
934-0052B
DUAL PICK-UP TRUCK DRAWER
934-0233A
4-DRAWER SYSTEM
934-0390
DUAL DRAWER SYSTEM
FOR CHEVY TAHOE
Page 36
www.dandrelectronics.com
STORAGE SYSTEMS
TS09 FIREARM LOCKBOX
■ An effective and practical solution for secured storage for cruiser and applications
■ Available with optional electronic lock release (timer control)
933-0025A
Ford CV 2007-2009
933-0035A
Chevy Impala 2006+
933-0048A
Dodge Charger 2006-2009
934-0349A
Slide out Storage Drawer for 2008 Dodge Charger
www.dandrelectronics.com
Page 37
WINDOW BARS / DOOR COVERS
WINDOW BARS
Rear window bar is offering protection from windows being
kicked out by restrained prisoners while placed in the back seat.
Designed to fit with rear partition cages by Setina Manufacturing.
■ Specify vehicle and type of prisoner partition when ordering
■ Optional dual light module per side for side warning coverage
Available models:
■ WB-CHRGR-06 for 2006+ Dodge Charger
■ WB-IMP-06 for 2006+ Chevy Impala
■ WB-EXPD-07 for 2007+ Ford Expedition
■ WB-TAH-07 for 2007+ Chevy Tahoe
■ WB-EXPL-06 for 2006+ Ford Explorer
■ WB-CV-98-03 Vertical Square for 2006+ Ford Crown Vic
■ WBK-CV-03-04 Horizontal Round for 2006+ Ford Crown Vic
WB-CHRGR
WB-IMP
WB-CV-98-03
WBK-CV-03-04
*** FOR OTHER WINDOW BARS MODELS, PLEASE CONTACT YOUR SALES REPRESENTATIVE ***
REAR DOOR COVERS
Rear door covers of 14-gauge black powder coated steel offering
inside door protection and no inside exit access. These covers are
to replace factory door panels. Panels are used in conjunction
with rear window bars.
Easy installation and removal.
Available models:
■ RDC-CHRGR-06 for 2006+ Dodge Charger
■ RDC-IMP-06 for 2006+ Chevy Impala
■ RDC-FEXPD-06 for ‘05-’06 Ford Expedition
■ RDC-FEXPD-07 for 2007+ Ford Expedition
■ RDC-FCV for 2006+ Ford Crown Vic
■ RDC-TAH-07 for 2007-2009 Chevy Tahoe
RDC-FEXPD-07
RDC-FCV
*** FOR OTHER REAR DOOR COVERS MODELS, PLEASE CONTACT YOUR SALES REPRESENTATIVE ***
Page 38
www.dandrelectronics.com
ACCESSORIES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1) 178-0010 - Mini Rocker switch
2) PA-MIC - Noise cancel mic with plug-in jack
3) 183-0004 - Coil cord with cigarette plug
4) 300-0016 - Waterproof Cable Grommet, Mini 5/16” I.D.
5) 184-0001 - Waterproof Cable Grommet, Small 1/2” I.D.
6) 184-0002 - Waterproof Cable Grommet, Medium 3/4” I.D.
7) 184-0003 - Waterproof Cable Grommet, Large 1” I.D.
8) 184-0034 - Waterproof Cable Grommet, 90 Deg.
9) 183-0008 - Resettable Circuit Breaker
Available in 50Amp, 80Amp & 100Amp
10) BA424102A - Back-up Alarm, Self-adjusting volume
77-102db, 12-24V, Universal Mounting
W-4”/ H-2 5/8”/ D-1 5/8”
11) 183-0018 - Dome light dual mode w/Clear bulb & Red LED’s
12) 400-0097 - Replacement Lock Ratchet-Lever
13) ADT10 - 70Amp Relay Module
14) 936-0209A - F150-04 Flip Bracket Adapter (use w/936-0224)
15) 936-0224A - Over-Radio Swing Bracket for FCV F2/F3/RDS-RK series
16) VT-4 - 12/24 Volt meter
www.dandrelectronics.com
Page 39
ISO 9001:2008 REGISTERED COMPANY
8820 GEORGE BOLTON PKWY
BOLTON, ONTARIO L7E 2Y4
TEL: 905-951-9997
FAX: 905-951-0019
TOLL FREE: 1-800-538-7338
www.dandrelectronics.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement