New semi test applicatioNs demaNdiNg greater Time to demand the new

New semi test applicatioNs demaNdiNg greater Time to demand the new
New semi test applications demanding greater
throughput and maximum low current performance?
Time to demand the new industry standards for high-speed switching.
Semiconductor test applications that require higher-speed test
sequences and greater overall throughput demand our newest
high-speed semiconductor switch mainframes, the six-slot
Model 707B and the single-slot Model 708B. They’re ideal
companions for Keithley’s line of high-performance matrix
switch cards, including our industry-standard, ultra-lowcurrent Model 7174A Air Matrix card and the Model 7072-HV High-Voltage Semiconductor Matrix Card, which
can deliver up to 1300V to any pin on the DUT or probe card.
n
Low-leakage matrix configurations with up
to 576 crosspoints per mainframe
n
Switch I-V and C-V instruments while
maintaining maximum low-level
performance
n
Source and measure up to 1300V or 1A
without reconfiguring cables between tests
n
Compatible with all semiconductor
parametric analyzers
n Replacements
for Keithley’s Models 707A
and 708A mainframes
a
g r e a t e r
m e a s u r e
o f
Even more important, these new switch mainframes help you test faster, more flexibly, and more cost-effectively
than ever before:
n
NEW digital control platform for higher throughput:
This new platform supports dramatically faster commandto-connect speeds for higher test throughput. Even in the
slowest mode, you can boost throughput by as much as 40%
without any code changes.
n
NEW interfaces for greater flexibility: Now you can
communicate with or program either mainframe remotely
via the LXI/Ethernet connection, USB port, GPIB, and our
ultra-fast TSP-Link® inter-unit communication/triggering
bus, which simplifies system scaling.
n
NEW on-board Test Script Processor (TSP®) for
distributed processing and control: You don’t need
a central controller to direct test system operation—just
define a test script or sequence and store it in the TSP’s
memory, then execute it on command, for a dramatic
throughput increase. Their TSP and TSP-Link architecture
make the Models 707B and 708B ideal test companions for
our Series 2600A System SourceMeter® instruments and
ACS and S530 testers
n
NEW front panel design for easier manual operation:
Our updated front panel interface simplifies manual
programming and lets you confirm switch status at a glance.
c o n f i d e n c e
The TSP/TSP-Link connection
Series 2600A SMUs have an on-board test script processor (TSP) that executes test scripts and controls the switch matrix via the TSPLink, which acts like a hardware backplane, connecting the two high-performance processors at full hardware speeds. This configuration
provides the best possible throughput and flexibility and the tightest synchronization between the instrument and the switch matrix.
Multiple mainframes can be connected using TSP-Link, so you can create very
large switch configurations easily and cost-effectively.
Just like our earlier switch mainframes, the Models 707B and 708B are
engineered to integrate seamlessly with the Model 4200-SCS semiconductor
parametric analyzer through its existing matrix driver and GPIB interface,
allowing fast access to the system’s I-V and C-V measurement capabilities.
Need more ideas on configuring high-speed switch systems? Download a free copy
of our new 8-page application note, Designing a High Throughput Switch System for
Semiconductor Measurements, at www.keithley.com/data?asset=54245. It addresses switch
system configurations for DC and AC characterization, timing considerations, coordination
of source and measure instruments; it also offers a demonstration of the advantages of
an optimized switch—SourceMeter configuration over a traditional GPIB configuration.
To learn more about how Keithley’s 707B and 708B switch mainframes enable test
systems that are faster, more flexible, and more cost-effective than ever before, contact your local
Keithley Instruments representative to arrange a consultation. Contact information is available at www.keithley.com
Specifications are subject to change without notice.
All Keithley trademarks and trade names are the property of Keithley Instruments, Inc.
All other trademarks and trade names are the property of their respective companies.
A
KEITHLEY INSTRUMENTS, INC.
■
G R E A T E R
28775 AURORA RD.
© Copyright 2010 Keithley Instruments, Inc.
■
M E A S U R E
CLEVELAND, OH 44139-1891 ■
Printed in the U.S.A.
O F
C O N F I D E N C E
440-248-0400
■
Fax: 440-248-6168
No. 3093
■ 1-888-KEITHLEY
■
www.keithley.com
10.10 3K.AG
30%
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising