PV-02123B
"Now You Know What Your
Engine Is Telling You"
Displays Over 30 Standard SAE J1939 Parameters
Broadcast by Engine and Transmission ECU’s
■
Graphical Display Features Wide Operating
Temperature Range Viewing (-40 to 167°F/75°C).
■
Displays Active and ECU-Stored Faults with Text
Description for Diagnosing Equipment Malfunctions
■
Simple Connection to Optional Components
nt
in
ue
d
■
The PowerView has four buttons using touch
sensitive technology, which eliminates the concern for push button wear and failure. In addition, operators can navigate the display with
ease. The enhanced alarm indication has ultrabright alarm and shutdown LEDs (amber and
red). It has a wide operating temperature range of
-40 to 185ºF (-40 to +85ºC), display viewing -40
to 167ºF (-40 to +75ºC), and environmental sealing to +/-5 PSI (±34 kPa). In addition the
PowerView features Deutsch DT style connectors molded into the casing and fits quickly and
easily into existing 2-1/16 in. (52 mm) diameter
gage openings.
D
TM
For Modern Electronic Engines and Equipment
Applications Using SAE J1939 Controller Area Network
co
The PowerView is a powerful new display in a
line of components manufactured by FWMurphy
as part of its J1939 MurphyLink™ Family. The
J1939 MurphyLink Family of products has
been developed to meet the needs for instrumentation and control on electronically controlled
engines communicating using the SAE J1939
Controller Area Network (CAN).
ct
The PowerView System is comprised of the
PowerView and the MLink PowerView Analog
Gages. The PowerView is a multifunction tool
that enables equipment operators to view many
different engine or transmission parameters and
service codes. The system provides a window
into modern electronic engines and transmissions. The PowerView includes a graphical backlit LCD screen. Back lighting can be controlled
via menu or external dimmer potentiometer. The
display can show either a single parameter or a
quadrant display showing four parameters simultaneously. Diagnostic capabilities include fault
codes with text translation for the most common
fault conditions.
P
ro
du
TM
(00-02-0527)
■
is
Description
PV-02123B
Revised 11-04
Catalog Section 78
Other components in the system are microprocessor-based MLink PowerView Analog
Gages for displaying critical engine data broadcast by an electronic engine or transmission’s
Engine Control Unit (ECU): engine RPM, oil
pressure, coolant temperature, system voltage,
etc. and a combination audible alarm and relay
unit for warning and shutdown annunciation. Up
to 32 components may be linked to the
PowerView using a simple daisy chain wire connection scheme using RS485. The PowerView
and all connected components can be powered
by either 12 or 24-volt systems.
TM
PV-02123B page 1 of 2
Display Parameters
The following are some of the engine and transmission parameters displayed by the PowerView
in English or Metric units as well as in Spanish,
French, or German (when applicable, consult
engine or transmission manufacturer for SAE
J1939 supported parameters):
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Engine RPM
Engine Hours
Machine Hours
System Voltage
% Engine Load at the Current RPM
Coolant Temperature
Oil Pressure
Fuel Economy
Throttle Position
Engine Manifold Air Temperature
Current Fuel Consumption
Transmission Oil Pressure
Transmission Oil Temperature
Transmission Gear Position
Active Service Codes
Stored Service Codes (when supported)
Set Units for Display (English or Metric)
View Engine Configuration Parameters
Specifications
Dimensions
FRONT
BACK
4.25 in.
(108 mm)
4.25 in.
(108 mm)
in
ue
d
3.489 in.
(89 mm)
SIDE
HOLE CUTOUT
1.94 in.
(50 mm)
2.062 in.
(52 mm)
diameter
1.972 in.
(50 mm)
2.070 in.
(53 mm)
nt
.953 in.
(24 mm)
2.41 in.
(61 mm)
0.78 in.
(20 mm)
R 0.063 in.
(1.6 mm)
0.125 in.
(3 mm)
co
Display: 1.3 x 2.6 in. (33 x 66 mm), 64 x 128 pixels.
Operating Voltage: 8 VDC minimum to 32 VDC max.
Reversed Polarity: Withstands reversed battery terminal
polarity indefinitely within operating temperatures.
Operating Temperature: -40 to +85ºC (-40 to185ºF).
Display Viewing Temperature: -40 to +75ºC (-40 to 167ºF).
Storage Temperature: -40 to +85ºC (-40 to185ºF).
Environmental Sealing: IP68, +/- 5 PSI (+/- 34.4 kPa).
Power Supply Operating Current: (@ 14 VDC)=
52 mA minimum; 268 mA maximum (LCD heater on).
CAN BUS: SAE J1939 Compliant.
Case: Polycarbonate / Polyester.
Clamp: Polyester (PBT).
Connectors: 6-Pin Deutsch DTO6 Series.
Maximum Panel Thickness: 3/8 in. (9.6 mm).
Mounting Hole: 2.062 inch (52 mm) in diameter.
Auxiliary Communications: Either:
Gages: One (1) RS485 port, MODBUS RTU master.
MODBUS: One (1) RS485 port, MODBUS RTU slave,
selectable baud rate; 9800; 27K; 38.4K.
Potentiometer (External Dimmer)Input: 1K ohm, 1/4 W
Shipping Weights (all models): 1/2 lb. (225 g.)
Shipping Dimensions (all models): 6 x 6 x 6 in. (152 x 152 x
152 mm).
3.18 in.
(81 mm)
How to Order
is
Warranty
To order the PowerView use the model number designation diagram below.
PV100 – A –
D
A limited warranty on materials and workmanship is given with
this FW Murphy product. A copy of the warranty may be viewed
or printed by going to www.fwmurphy.com/support/warranty.htm
Model
PV100 = PowerView
Blank = Standard
GM = For use only on GM
MEFI ECU — General Motors
ct
Accessories
Model Style
A = Black Overmold Faceplate with Silver Bezel
ro
du
– PowerView Analog Gages
– PowerView Wiring Harnesses
For details see bulletin PVC-03020B
† MurphyLinkTM is a registered trademark of FWMurphy. All other trademarks and service
MURPHY SWITCH OF CALIFORNIA
41343 12th Street West
Palmdale, California 93551-1442; USA
+1 661 272 4700 fax +1 661 947 7570
e-mail sales@murphyswitch.com
www.murphyswitch.com
MACQUARRIE CORPORATION
1620 Hume Highway
Campbellfield, Vic 3061; Australia
+61 3 9358 5555 fax +61 3 9358 5558
e-mail murphy@macquarrie.com.au
GI
D
MURPHY DE MEXICO, S.A. DE C.V.
Blvd. Antonio Rocha Cordero 300, Fracción del Aguaje
San Luis Potosí, S.L.P.; México 78384
+52 444 8206264 fax +52 444 8206336
Villahermosa Office +52 993 3162117
e-mail ventas@murphymex.com.mx
www.murphymex.com.mx
FRANK W. MURPHY, LTD.
Church Rd.; Laverstock, Salisbury SP1 1QZ; U.K.
+44 1722 410055 fax +44 1722 410088
e-mail sales@fwmurphy.co.uk
www.fwmurphy.co.uk
RE
FW Murphy
P.O. Box 470248
Tulsa, Oklahoma 74147 USA
+1 918 317 4100
fax +1 918 317 4266
e-mail sales@fwmurphy.com
www.fwmurphy.com
CONTROL SYSTEMS & SERVICES DIVISION
P.O. Box 1819; Rosenberg, Texas 77471; USA
+1 281 633 4500 fax +1 281 633 4588
e-mail sales@fwmurphy.com
E
P
marks used in this document are the property of their respective owners.
STER
USA–ISO 9001:2000 FM 28221
UK–ISO 9001:2000 FM 29422
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
Printed in U.S.A.
PV-02123B page 2 of 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising