Dyna-Glo DGP700SSB User's Manual And Operating Instructions

Dual
Fuel Grill
/3*DV*ULOO
Model #DGP700SSB/DGP700SSB-D
0RGHO'*313
86(5¶60$18$/$1'23(5$7,1*,16758&7,216
$16=D±&6$D
ANS Z21.58a-2008 CSA1.6a-2008
2XWGRRU&RRNLQJ*DV$SSOLDQFH
$VVHPEOHU,QVWDOOHU7KLVPDQXDOFRQWDLQVLPSRUWDQWLQIRUPDWLRQQHFHVVDU\IRUWKHSURSHU
DVVHPEO\DQGVDIHXVHRIWKLVDSSOLDQFH5HDGDQGIROORZDOOZDUQLQJVDQGLQVWUXFWLRQVEHIRUH
DVVHPEOLQJDQGXVLQJWKLVDSSOLDQFH/HDYHWKHVHLQVWUXFWLRQVZLWKWKHFRQVXPHU
&RQVXPHU8VHU)ROORZDOOZDUQLQJVDQGLQVWUXFWLRQVZKHQXVLQJWKLVDSSOLDQFH
5HWDLQWKHVHLQVWUXFWLRQVIRUIXWXUHUHIHUHQFH
'$1*(5
,I\RXVPHOOJDV
6KXWRIIJDVWRWKHDSSOLDQFH
([WLQJXLVKDQ\RSHQÀDPH
2SHQ/LG
,IRGRUFRQWLQXHVNHHSDZD\IURPWKH
DSSOLDQFHDQGLPPHGLDWHO\FDOO\RXU
JDVVXSSOLHURU\RXU¿UHGHSDUWPHQW
:$51,1*
'RQRWVWRUHRUXVHJDVROLQHRURWKHU
ÀDPPDEOHOLTXLGVRUYDSRUVLQWKHYLFLQLW\
RIWKLVRUDQ\RWKHUDSSOLDQFH
$Q/3F\OLQGHUQRWFRQQHFWHGIRUXVHVKDOO
QRWEHVWRUHGLQWKHYLFLQLW\RIWKLVRUDQ\
RWKHUDSSOLDQFH
7KLVJULOOLVIRURXWGRRUXVHRQO\DQGVKDOO
QRWEHXVHGLQDEXLOGLQJJDUDJHXQGHU
RYHUKDQJVRUDQ\RWKHUHQFORVHGDUHD
'RQRWOHDYHDOLWJULOOXQDWWHQGHG
.HHSFKLOGUHQDQGSHWVDZD\IURP
WKHJULOODWDOOWLPHV
missing parts?
returning to
your
Questions, problems,
Before
retailer, call our customer
8:30
a.m.
– 4:30 p.m.,
CST, Monday – Friday
service departmentat 1-877-447-4768,
or e-mail us at [email protected].
201-06-001
/3*DV*ULOO
Dual
Fuel Grill
STOP!
121(('725(7851727+(6725(
4XHVWLRQV:LWK7KH$VVHPEO\"
5HTXLUH3DUWV,QIRUPDWLRQ"
3URGXFW8QGHU0DQXIDFWXUHUV:DUUDQW\"
&DOO7ROO)UHH
DP±SP&670RQGD\±)ULGD\
5HWDLQ7KLV2ZQHU¶V0DQXDO$QG3URRI2I3XUFKDVH)RU)XWXUH5HIHUHQFH
7RKHOSXVKHOS\RX
)LOOLQWKHLQIRUPDWLRQEHORZ
'DWHRI3XUFKDVH
3ODFHRI3XUFKDVH
0RGHO1XPEHU
3URGXFW6HULDO1R
02'(/180%(5$1'352'8&76(5,$/180%(5&$1%()281'21
7+(5$7,1*/$%(/2)<285*5,//
Grill
Dual Fuel
7$%/(2)&217(176
2 6DIHW\,QIRUPDWLRQ
5 3DFNDJH &RQWHQWV
7 ,OOXVWUDWHG 3DUWV /LVW
8 +DUGZDUH&RQWHQWV
9 $VVHPEO\,QVWUXFWLRQV
2SHUDWLRQ,QVWUXFWLRQV
19
&DUHDQG0DLQWHQDQFH
26
7URXEOHVKRRWLQJ
31
34
5HSODFHPHQWV3DUWV/LVW
:DUUDQW\
38 1
Fuel
Dual
Grill
SAFETY INFORMATION
6$)(7<,1)250$7,21
and
understand
entire
manual
Please read
this
before
attempting
to assemble,
operate
or install
the
product. If you have any questions regarding the product, please call customer service at: 1-800-963
8:00 a.m. – 5:00 p.m.
EST, Friday.
0211, 8:00 a.m. – 6:00 p.m. EST, Monday
– Thursday,
• This grill
is
for
outdoor
use only in well-ventilated areas.
• Keep
a
Class
B
fire
extinguisher
near
this product
at all
times. • DO
NOT
store
or
use
gasoline
or
any
other
flammable
vapors
and
liquids
within
25
feet
(8 m)
of this or any
other
appliance.
• AnLP Cylinder
not
connected
for
use
should
be
stored
a
minimum
of
from
10
feet (3 m) away
this
or any
other
appliance.
• DO
NOT
operate
the unit
or combustible materials such as decks,
near or under
flammable
porches
A minimum clearance
operate
or carports.
of 36 in. (92
cm)
is recommended.
DO NOT
unit under overhead
construction.
the
to combustible
is
36 in. (92 cm)
from
and back.
•A
minimum
clearance
construction
sides
is for use with
propane
gas
only (propane
cylinder
not included). • The
propane grill side
gas
grill to the self-contained
system
• Never
attempt to attach
this
propane
of a boat, camper
trailer,
home or house.
motor
• Never use charcoal lighter fluid on the GAS grill side. not use gasoline,
or alcohol
for
lighting.
The
LP gas
supply
• Do
kerosene
cylinder
used with this appliance must be:
Constructed
and
marked in accordance with the Specifications for LP-Gas Cylinders of the U.S.
(a)
Department
of Transportation
(D.O.T.) or
the National
Standard
of Canada,
CAN/CSA-B339,
Cylinders,
Spheres and Tubes
for Transportation
of Dangerous
Goods;
and Commission,
as
applicable;
and
Provided with
a listed
(b)
overfilling
prevention
device.
the connector
outdoor
cooking
(c) Provided with a cylinder connection device
compatible
with
for
appliances.
This grill is not intended
to be used in or installed
on recreational
vehicles and/or
boats.
• DO NOT use this product in a manner other than its intended a purpose. It is NOT intended
for commercial use.
• Do not attempt to move the grill while it is lit, when it is hot, while in use, or while ashes are still hot.
The casters should be locked when not moving the grill.
• DO
NOTleave
hot ashes
unattended
until thegrill
cools completely.
• DO NOT use
this appliance
as a heater.
• Operate
non-flammable
such as asphalt, concrete or solid
the unit
on
a stable,
level,
surface
ground.
operate
the unit
DO
NOT
on
flammable material
such
as carpet
or wood deck.
• Use
when
assembling
and
operating
caution
this unit to avoid cuts and scrapes from edges.
• Do not use the grill unless
it is completely
assembled
and all parts are securely
fastened
and
tightened.
• Use caution
or back
when
lifting
and
moving
the unit to avoid back
strain
injury.
• Keep
all
combustible
items
and
surfaces
at
least
36
inches
(91.44
cm)
away from the grill at all
times.
2
Dual Fuel Grill
SAFETY INFORMATION
• Do not use in an explosive atmosphere. Keep grill area clear and free from combustible materials,
gasoline and other flammable vapors and liquids.
• Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid burns,
unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc…).
• Do not alter this grill in any manner.
• Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or leaks,
the hose must be replaced prior to operating the appliance. The replacement hose assembly will be
that which is specified by GHP Group, listed in the repair parts list in this manual.
• Move gas hoses as far away as possible from hot surfaces and dripping hot grease.
• Never keep a filled container in a hot car or car trunk. Heat will cause the gas pressure to increase,
which may open the relief valve and allow gas to escape.
• Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the grill
before each use. Do not obstruct the flow of gas or ventilation air.
• The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability to
properly assemble or safely operate the grill.
• Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn
you severely.
• Always cook your food on the charcoal grate after the flame has burned out.
• Dispose of cold ashes by wrapping them in a heavy-duty aluminum foil and placing in a
noncombustible container. Make sure that there are no other combustible materials in or near
the container.
• If you must dispose of ashes in less time then it takes for the ashes to completely cool down, then
remove the ashes from the unit, keeping them in the heavy-duty foil, and soak them completely
with water before disposing of them in a noncombustible container.
• Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.
• Do not place this grill on any type of tabletop surface. The grill should be placed on a flat and
level surface.
• Do not use the grill in high winds.
• Do not modify this grill for use with other indoor or outdoor fixtures, such as countertops or drop-in
grill islands.
• Do not use this grill indoors.
CALIFORNIA PROPOSITION 65
1. Fuels used in gas, charcoal, wood, or oil fired appliances and the products of combustion
of such fuels, contain Chemicals known to the State of California to cause cancer, birth
defects or other reproductive harm.
2. This product contains chemicals, including lead and lead compounds, known to the
State of California to cause cancer, birth defects or other reproductive harm. Wash hands
after handling.
3
Fuel
Grill
Dual
SAFETYINFORMATION
6$)(7<,1)250$7,21
:$51,1*
'RQRWSODFHWKHJULOOXQGHURYHUKHDGFRPEXVWLEOHFRQVWUXFWLRQRUDZQLQJV
0LQLPXPFOHDUDQFHIURPVLGHVDQGEDFNRIXQLWWRFRPEXVWLEOHFRQVWUXFWLRQ
LQFKHVPPIURPVLGHVDQGEDFN
All of the above noted clearances are with respect to combustible wood
structures or construction. Greater clearances are recommended for vinyl
structures or construction.
LQ P P
P P
127(7KHLQVWDOODWLRQPXVWFRQIRUPZLWKORFDOFRGHVRULQWKHDEVHQFHRIORFDOFRGHV
ZLWKHLWKHUWKH1DWLRQDO)XHO*DV&RGH$16,=1)3$1DWXUDO*DVDQG3URSDQH
,QVWDOODWLRQ&RGH&6$%RU3URSDQH6WRUDJHDQG+DQGOLQJ&RGH%
&$/,)251,$352326,7,21:$51,1*
)XHOVXVHGLQJDVRURLO¿UHGDSSOLDQFHVDQGWKHSURGXFWVRIFRPEXVWLRQRIVXFKIXHOVFRQWDLQ
CARBON
MONOXIDE
HAZARD
FKHPLFDOVNQRZQWRWKH6WDWHRI&DOLIRUQLDWRFDXVHFDQFHUELUWKGHIHFWVRURWKHUUHSURGXFWLYH
Burning
carbon
monoxide,
which
has
no
odor.
charcoal insidecan kill you. It gives off
KDUP7KLVSURGXFWFRQWDLQVFKHPLFDOVLQFOXGLQJOHDGDQGOHDGFRPSRXQGVNQRZQWRWKHVWDWH
NEVER
burn
charcoal
inside homes, garages, vehicles, or tents.
LQ
RI&DOLIRUQLDWRFDXVHFDQFHUELUWKGHIHFWVRURWKHUUHSURGXFWLYHKDUP
4
Dual Fuel Grill
PACKAGE CONTENTS
BEFORE STARTING ASSEMBLY, UNPACK CARTON AND VERIFY CONTENTS. COMPARE
ENCLOSED PARTS WITH PACKAGE CONTENTS LIST AND DIAGRAM. IF ANY PART IS
MISSING OR DAMAGED, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT. CONTACT
CUSTOMER SERVICE FOR REPLACEMENT PARTS.
1-877-447-4768 8:30 a.m. – 4:30 pm CST, Monday – Friday.
Part No.
Description
Qty
Part No.
1
bottom shelf
1
18
grease cup
1
2
locking caster
2
19
lid handle
2
3
caster
2
20
lid handle bezel
2
4
cart left side panel
1
21
warming rack
2
5
cart right side panel
1
22
heat tent
2
6
cart rear panel
2
23
cooking grate
4
7
upper front door brace
1
24
ash collection frame
1
8
left door assembly
1
25
charcoal tray
1
9
right door assembly
1
26
ash tray handle
2
10
cabinet door handle
2
27
ash tray
1
11
cabinet door handle bezel
4
28
LP cylinder exclusion
1
12
cabinet door handle sleeve
4
29
cart front vertical beam
1
13
grill body
1
30
cart rear vertical beam
1
14
left side burner assembly
1
31
LP cylinder heat shield
1
15
side burner grate
1
32
cart middle cross beam
1
16
right side shelf assembly
1
33
battery (AA)
1
17
grease pan
1
34
charcoal tray adjustment handle
1
5
Description
Qty
Dual Fuel Grill
PACKAGE CONTENTS
15
14
19
20
21
13
16
34
22
23
17
7
25
33
31
18
8
4
27
24
30
32
26
29
6
6
28
5
9
10
12
11 3
2
1
7RROV5HTXLUHGIRU8QSDFNLQJ$VVHPEO\DQG/HDN7HVWLQJRI7KLV3URGXFW
Phillips
Screwdriver
3KLOOLSV6FUHZGULYHU
Work Gloves
(optional)
Estimated Assembly
Time:
30-45
minutes
6 Spray Bottle
Dual Fuel Grill
ILLUSTRATED PARTS LIST
bottom shelf
locking caster
caster
cart left side panel
1
2
3
4
cart right side panel
cart rear panel
upper front door brace
left door assembly
5
6
7
8
right door assembly
cabinet door handle
cabinet door handle bezel cabinet door handle sleeve
9
10
11
grill body
left side burner assembly side burner grate
right side shelf assembly
13
14
15
16
grease pan
grease cup
lid handle
lid handle bezel
17
18
19
20
warming rack
heat tent
cooking grate
ash collection frame
21
22
23
24
7
12
Dual Fuel Grill
ILLUSTRATED PARTS LIST
charcoal tray
ash tray handle
ash tray
LP cylinder exclusion
25
26
27
28
cart front vertical beam
cart rear vertical beam
LP cylinder heat shield
cart middle cross beam
29
30
31
32
battery
charcoal tray
adjustment handle
33
34
HARDWARE CONTENTS
Part
Description
Qty
A
M6x12 Screw
48
B
6mm Flat Washer
16
C
6mm Spring Washer
16
D
M4x10 Screw
10
E
M6x20 Screw
4
F
M6x16 Screw
10
M5x10 Screw
4
G
(Pre-assembled in cabinet door handles)
G
H
M5x10 Screw
6
M6x25 Screw
4
(Pre-assembled in lid handles)
I
Cotter Pin
1
8
Fig
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
NOTE: Use caution when assembling and operating this unit to avoid cuts and scrapes from edges.
Step 1: Assemble the locking casters (2) and casters (3).
Secure the locking casters (2) with four screws each (A), four
spring washers each (C) and four flat washers each (B) to the
rear side (side with cut-outs for accessing locking mechanism)
of the cart bottom shelf (1). Tighten all screws. As illustrated,
the flat washer (B) is placed under the spring washer ( C).
Install the casters (3) to the front side (side with no cut-outs)
of the cart bottom shelf (1) using four screws (A), four spring
washers ( C) and four flat washers (B). Tighten all screws.
1
A
3
2
C
B
1
Hardware Used
A
M6x12 Screw
Qty: 16 pcs
B
6mm Flat Washer
Qty: 16 pcs
C
6mm Spring Washer Qty: 16 pcs
A
C
B
Step 2: Assemble the LP cylinder exclusion (28).
Using 1 screw (A) at each end of the LP cylinder exclusion (28)
attach to cart bottom shelf (1), as illustrated.
2
28
A
Hardware Used
1
A
M6x12 Screw
Qty: 2 pcs
3
Step 3: Assemble the cart side panels (4 & 5).
Partially insert 4 screws (A) into cart bottom shelf (1), leaving a
4-6mm gap between the screw head and the top surface of the
cart bottom shelf (1). Each cart side panel (4 & 5) has 2 keyholes located on the bottom of each panel. Using the keyholes,
place the cart side left panel (4) over the screws just inserted in
the cart bottom shelf (1) and slide the cart left side panel forward.
Secure the panel by hand tightening the screws, but do not fully
tighten the screws until after Step 4 (to allow for readjustment
once all the panels are assembled.) Attach the cart right side
panel (5) to the cart bottom shelf (1) following the same steps.
A
1
4
1
5
Hardware Used
A
M6x12 Screw
4
Qty: 4 pcs
9
A
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 4: Assemble cart rear vertical beam (30) and rear panels (6).
A. Using 2 screws (A) attach the cart rear vertical beam (30) to the
cart bottom shelf (1). Tighten the screws.
B. Partially insert 1 screw (A) to the cart left side panel (4) and 1
screw (A) to the cart right side panel (5) and 2 screws (A) to the
cart vertical beam (30). (Leaving approximately 4-6mm between
the screw head and the surface of the parts).
C. Align the keyholes in one of the cart rear panels (6) with 2 of the
screws just installed in the cart left side panel (4) and cart rear
vertical beam (30). Slide the cart rear panel (6) over the screws
and down to meet the cart bottom shelf (1). Secure the cart rear
panel (6) to the cart bottom shelf (1) using 2 screws (A).
D. Align the keyholes in one of the cart rear panels (6) with 2 of the
screws just installed in the cart right side panel (4) and cart rear
vertical beam (30). Slide the cart rear panel (6) over the screws
and down to meet the cart bottom shelf (1). Secure the cart rear
panel (6) to the cart bottom shelf (1) using 2 screws (A).
E. Tighten all screws (A) on the cart left side panel (4), cart right
side panel (5) and cart rear vertical beam (30)
4
30
A
1
4
6 30
6
5
A
1
A
Hardware Used
A
M6x12 Screw
Qty: 10 pcs
Step 5: Assemble cart front vertical beam (29), upper front door
brace (7) and cart middle cross beam (32).
A. Pre-assemble the cart front vertical beam (29), upper door front
brace (7) and cart middle cross beam (32) using 4 screws (A) forming the beam assembly. Tighten all screws.
B. Partially insert 2 screws (A) into the cart left side panel (4) and
2 screws into the cart right side panel (5), as illustrated (Leave
approximately 4-6mm of space between the screw head and
the surface of the parts). Align the keyhole slots in the preassembled upper door front brace (7) of the beam assembly,
with the 4 screws just installed. Slide the upper door front
brace (7) down until snug. Tighten all 4 screws (A).
C. Fasten the cart middle cross beam (32) of the beam assembly
to the cart rear vertical beam (30) using 1 screw (A) and tighten.
D. Secure the cart front vertical beam (29) of the beam assembly
to the cart bottom shelf (1) using 2 screws (A). Tighten all screws.
5
A
29
32
7
7
A
A
29
1
30
Hardware Used
A
M6x12 Screw
A
Qty: 11 pcs
10
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 6: Assemble the LP cylinder heat shield (31).
Install the LP cylinder heat shield (31) by placing it between
the cart middle cross beam (32) and the cart rear vertical beam
(30). Slide the LP cylinder heat shield (31) up to meet the
cart middle cross beam (32) so the screw holes are aligned.
Attach LP cylinder heat shield (31) to the cart middle cross
beam (32) using 2 screws (A). Attached the LP cylinder heat
shield (31) to the cart rear vertical beam (30) using 1 screw (A).
Tighten all screws.
6
32
A
31
30
Hardware Used
A
M6x12 Screw
Qty: 3 pcs
Step 7: Assemble cabinet door handles (10).
Remove the pre-assemble cabinet door handle screws (G) and
the cabinet door handle bezels (11) from the cabinet door handle
(10). Insert 2 cabinet door handle sleeves (12) into the back of
the right door assembly (9). Align cabinet door handle (10) and
2 cabinet door handle bezels (11) on the front of the right door
assembly (9) and attach with 2 screws (G) inserted from the back
side of the right cabinet door assembly (9) and through the cabinet
door handle sleeves (12). Repeat step to attach left door
assembly (8).
Hardware/Parts Used
G
M5x10 Screw
Qty: 4 pcs
12
Handle Sleeve
Qty: 4 pcs
11
Handle Bezel
Qty: 4 pcs
10
Door Handle
Qty: 2 pcs
11
7
11
9
12
G
10
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 8: Attach the door assemblies.
Align the holes in the hinge of the left door assembly (8) to the holes
in the cart left side panel (4). Insert 4 screws (D) and tighten.
Attach the right door assembly (9) the same way. If interference
occurs between either the left or right cabinet doors and the cart
front vertical beam (29) when closing the doors, adjustment may
be needed. Widen the door opening by loosening the screws
that secure the cart left and right side panels (4 & 5) to the cart
bottom shelf (1), adjusting the gap and retightening the screws.
8
4
4
D
8
4
5
Hardware/Parts Used
29
D
M4x10 Screw
Qty: 8 pcs
8
Step 9: Attach lid handles (19).
Remove the pre-assembled screws (H) and the lid handle
bezels (20) from the lid handles (19). Align the lid handle
bezels (20) and the lid handle (19) with the predrilled holes in
the front of the left lid. Attach handle with 2 screws (H) from
the inside of the lid. Attach the right lid handle the same way.
Hardware Used
H
M6x25 Screw
Qty: 4 pcs
20
Handle Bezel
Qty: 4 pcs
19
Lid Handle
Qty: 2 pcs
12
1
9
9
19
H
20
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 10: Attach grill body (13). NOTE: 2 people are recommended
for this step.
Lock the back 2 casters to ensure the cart does not move
while installing the grill body (13). Carefully place the grill
body (13) on to the cart, making sure the LP gas hose is
inside the cart. Align the holes in the grill body (13) with the
holes in the cart side panels (4 & 5). Secure the grill body
(13) to the cart using 4 screws (E). Secure the grill body (13)
to the cart middle cross beam (32) using 2 screws (A).
Tighten all screws.
10
13
E
Hardware Used
A
M6x12 Screw
Qty: 2 pcs
E
M6x20 Screw
Qty: 4 pcs
32
A
Step 11: Attach charcoal tray adjustment handle (34).
Thread the charcoal tray adjustment handle (34) into the
hole in the right side of the grill body front panel. Once the
charcoal tray adjustment handle is threaded through the front
wall of the grill body, insert the cotter pin (I) into the hole on
the end of the charcoal tray adjustment handle from inside
the grill body.
11
34
Hardware Used
I
Cotter Pin
Qty: 1 pc
I
I
13
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 12: Assemble the left side burner assembly (14).
A. Partially insert 3 screws (F) to the grill
12
body (13) as shown in Fig. A (leave
approximately 4-6mm between the
screw head and the surface of the grill
body (13). Align the keyholes in the left
side burner assembly (14) with the 3
screws just installed in the grill body
14
(13). Slide the left side burner assembly
13
(14) onto the screws. Secure the left
side burner assembly (14) to the grill
body (13) by inserting 2 additional screws (F) in remaining holes.
Tighten all five screws (F).
B. Align the brass orifice of the side burner feeder hose with the
center of the side burner tube (located on the underside the left
side burner assembly (14)). Make sure the orifice is inserted into
the center of the side burner tube. See Fig. b and Fig. c. Using
2 screws (D) sure the orifice support bracket to the side burner
support bracket.
C. Connect the ignition wiring to the electrode as illustrated.
D. Install the side burner grate (15).
Fig. b
Fig. c
Fig. A
F
14
F
F
D
Hardware Used
F
M6x16 Screw
Qty: 5 pcs
D
M4x10 Screw
Qty: 2 pcs
15
14
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 13: Attach right side shelf assembly (16).
Partially insert 3 screws (F) to the
grill body (13) as illustrated (leave
approximately 4-6mm between the
screw head and the surface of the
grill body (13). Align the keyholes
in the right side shelf assembly (16)
with the 3 screws just installed in the
grill body (13). Slide the right side
shelf assembly (16) onto the screws.
Secure the right side shelf assembly
(16) to the grill body (13) by inserting
2 additional screws (F) in remaining
holes. Tighten all 5 screws (F).
16
13
F
16
Hardware Used
F
M6x16 Screw
Qty: 5 pcs
F
Step 14: Install the heat tents (22) and the charcoal tray (25).
A. With the lids open, place the 2 heat tents (22) onto the
brackets directly above the burners located inside the
gas grill body as illustrated.
B. Place the charcoal tray (25) onto the charcoal lifting
frame, located on the inside of the charcoal grill body.
Step 15: Install the cooking grates (23) and warming racks (21).
A. Insert 2 cooking grates (23) on the gas grill body and 2
cooking grates (23) on the charcoal grill body.
B. Set one warming rack (21) on the gas grill body and one
warming rack (21) on the charcoal grill body.
15
F
22
25
21
21
23
23
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 16: Install the grease pan (17) and
grease cup (18).
Install the grease pan (17) and
grease cup (18) in the gas grill
body from the rear as illustrated.
17
17
Step 17: Assemble the ash collection frame (24).
From the rear, slide the ash collection
frame onto the guides of the charcoal grill
body and into position. Secure with 2
screws (G).
24
13
G
G
Hardware Used
G
M5x10 Screw
Qty: 2 pcs
27
Step 18: Install ash tray assembly (27).
Attach the ash tray handles (26) to the
ash tray (27) using 4 screws (G). From
the front, slide the ash tray assembly
onto the guides of the ash collector
frame (24) and into position.
24
26
Hardware Used
G
M5x10 Screw
18
Qty: 4 pcs
16
G
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 19: Install the ignition battery (33).
Remove the ignition cap by turning counterclockwise. Insert
the AA ignition battery (33) with the positive end facing out.
Reinstall ignition cap.
33
Step 20: Install LP gas cylinder (sold separately).
Open left side cart door and insert the LP gas cylinder (sold
separately) into the nesting hole located in the cart bottom shelf.
Align the hand screw coupling of the hose/regulator with the
threaded valve of the LP gas cylinder by rotating the cylinder
until positioned correctly. Hand tighten the hose/regulator
coupling to the threaded valve of the LP gas cylinder. Tighten
the tank retention screw until the cylinder is secure inside the
nesting hole of the cart.
Tank Screw
17
LPG
Hose/regulator
coupling
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Fully Assembled Grill
Front View
Rear View
18
Dual Fuel
Grill
OPERATION INSTRUCTIONS
FOR GAS BURNERS
&$87,21
2QO\XVHWKHUHJXODWRUDQGKRVHDVVHPEO\SURYLGHG
,IDUHSODFHPHQWLVQHFHVVDU\SOHDVHFDOORXUFXVWRPHUVHUYLFHFHQWHU
'RQRWXVHUHSODFHPHQWSDUWVWKDWDUHQRWLQWHQGHGIRUWKLVJULOO
&RQQHFWLQJ*DV&\OLQGHU
19
Use only 20-pound cylinders (Height 17.75 in./450.85mm, Diameter tank 12 in./304.80mm, Diameter
cylinder
connection
compatible
with the
connection
foot 8 in./203.20mm)
equipped
with a
device
for
outdoor cooking appliances. The cylinder must include a collar to protect the cylinder valve. The gas
roughly!
cylinder should not be dropped
or handled
Dual Fuel Grill
OPERATION INSTRUCTIONS FOR GAS BURNERS
20
To Disconnect: Fully close the tank valve by turning clockwise
.
Turn the coupling nut counterclockwise
until the regulator assembly detaches.
20
Dual Fuel Grill
OPERATION INSTRUCTIONS FOR GAS BURNERS
&+(&.,1*)25/($.6
$IWHUDOOFRQQHFWLRQVDUHPDGHFKHFNDOOFRQQHFWLRQVDQG¿WWLQJVRQWKH/3JDVWDQNYDOYH
JDVKRVHDQGUHJXODWRUIRUOHDNVZLWKDZDWHUDQGVRDSVROXWLRQ
7RSUHYHQW¿UHRUH[SORVLRQZKLOHWHVWLQJIRUDOHDN
ƒ$OZD\VSHUIRUPOHDNWHVWSULRUWROLJKWLQJWKHJULOO
ƒ'RQRWVPRNHZKLOHWHVWLQJIRUDOHDN
ƒ$OZD\VSHUIRUPOHDNWHVWVRXWGRRUVLQDZHOOYHQWLODWHGDUHD
ƒ'RQRWXVHDQ\VRXUFHRIÀDPHZKLOHWHVWLQJIRUOHDNV
ƒ'RQRWXVHWKHJULOOXQWLODQ\DQGDOOOHDNVDUHFRUUHFWHG
ƒ,I\RXDUHXQDEOHWRFRUUHFWDOHDNGLVFRQQHFWWKHSURSDQHVXSSO\
DQGFDOODJDVDSSOLDQFHVHUYLFHGHDOHU
3(5)250/($.7(67
ƒ3UHSDUHOHDNWHVWVROXWLRQE\FRPELQLQJSDUWOLTXLGGLVKVRDSZLWKSDUWVZDWHU
7RWDOVROXWLRQUHTXLUHGLVDSSUR[LPDWHO\R]PO
3XWOHDNWHVWVROXWLRQLQDVSUD\ERWWOH
ƒ(QVXUHDOOFRQWURONQREVDUHLQWKHµ2))¶SRVLWLRQ
ƒ2SHQ/3JDVWDQNYDOYH
ƒ6SUD\OHDNWHVWVROXWLRQRQDOOJDVFDUU\LQJFRQQHFWLRQVDQG¿WWLQJV
3UHVHQFHRIEXEEOHVDWDUHDVRIDSSOLHGWHVWVROXWLRQLQGLFDWHVDJDVOHDN
,IOHDNVDUHGHWHFWHGRU\RXVPHOORUKHDUJDVVKXWRIIWKH/3JDVWDQN
LPPHGLDWHO\DQGUHSDLURUUHSODFHWKHGHIHFWLYHSDUW
'RQRWXVHWKHJULOOXQWLODOOOHDNVDUHFRUUHFWHG
Lighting the Gas Grill
BEFORE FIRST USE
Remove all hangings or plastic straps, if present.
Before you cook on your new gas grill, it is important to clean your grill with heat. To do
this, operate the grill for approximately 15 minutes with the lid closed and all main burner
control knobs in the highest position. This will clean the internal parts by burning off any
residue and odor from the manufacturing process. NOTE: Burn off is NOT necessary for
side burner.
CAUTION: If the flame extinguishes accidentally during ignition or operation,
immediately TURN OFF the cylinder valve and then TURN OFF the control knobs.
21
BURNERS
GAS GRILL
LIGHTING
SIDE BURNER
INSTRUCTIONS
- FOR
ALL
INCLUDING
Warning: Do not lean over grill when lighting. Read instructions before lighting.
1. Check
the
ignition
control
knobs
are in the OFF
that
position.
2. Open
valve
at
tank
fully
by
turning
counter-clockwise
.
check
the tank and hose connection before lighting.
Always
lighting.
3. Open
lid during
to the ON
position.
knob counter-clockwise
turn ignition
4. Push
and
ignition
5 seconds,
If ignition
turn the control
until
burner
does
not
occur
in
ignites.
SRVLWLRQ
5. Press
button
to the OFF
position, wait
5 minutes,
and repeat the
lighting
procedure.
the ignition control knob
If
ignition
5 seconds,
place within
NOTE:
does not
take
immediately
turn
clockwise
OFF position. Wait 5 minutes and repeat
to the
above
steps
4-5
or refer to match
lighting
instructions
in
manual.
burner
If the
still
does not light, check that
there is gas in the cylinder and follow the
in the
manual.
Troubleshooting
match lighting
instructions
Check
the
Guide for
information.
more
6+87'2:1,16758&7,216
7XUQFRQWURONQREVFORFNZLVHWRWKHRIISRVLWLRQ
Dual Fuel Grill
OPERATION INSTRUCTIONS FOR GAS GRILL
&ORVHYDOYHDWWDQNIXOO\E\WXUQLQJFORFNZLVH
&ORVHOLG
Turn off LP supply at cylinder when appliance is not in use.
FOR
OUTDOOR
USE
ONLY
22
Dual
Fuel Grill
OPERATION
INSTRUCTIONS
FOR GAS GRILL
LIGHTING THE GAS GRILL WITH A MATCH
Do
Warning:
not lean over grill when lighting. Read instructions before lighting.
Main
Burners:
of the cabinet
1. Insert a match in the end of the match
holder
that is installed on
the
inside
door. the match.
2. Light
3. Immediately
on the side of the grill body, nearest
place the lit match through
the 20mm
hole
the left
burner.
Make sure
the lit match is close to the burner ports.
left main
counterclockwise
in the control
knob
that
operates
the
4. Press
burner
and
rotate
should
The other main control knobs can
toHigh position and burner
light immediately.
to the High position
ports.
now
be turned
and will light
via
the
crossover
5.
Adjust
burners
to
desired
cooking
settings.
Side
Burner:
that
is installed
the
inside of the cabinet
in the
door. 1. Insert
a match
on
end
of the match holder
2. Light
the match.
3. Immediately
the
match
ignition
wire located next
to
the
burner.
place
lit
near
the
4.
Pressin the control
knob
that
operates
theside
burner
and
rotate counterclockwise to High position and burner
light immediately.
should
burner
to desired cooking
5. Adjust
setting.
20mm hole
Main burner lighting
Side burner lighting
6+87'2:1,16758&7,216
7XUQFRQWURONQREVFORFNZLVHWRWKHRIISRVLWLRQ
&ORVHYDOYHDWWDQNIXOO\E\WXUQLQJFORFNZLVH
&ORVHOLG
Turn off LP supply at cylinder when appliance is not in use.
23
Dual Fuel Grill
OPERATION INSTRUCTIONS FOR CHARCOAL GRILL
Lighting the Charcoal Grill
MONOXIDE
HAZARD
CARBON
Burning charcoal inside can kill you. It gives off carbon monoxide, which has no odor.
NEVER burn charcoal inside homes, garages, vehicles, or tents.
IGNITION BURNER
LIGHTING
INSTRUCTIONS
FOR CHARCOAL
NOTE: Refer to pages 19-21
for complete
LP tank
installation, valve opening
or closing, and leak checking.
Warning:
Do
not
when lighting.
Read instructions
lean over grill
before lighting.
the
charcoal
control
1. Check
that
ignition
knob
is in the
OFF position.
2. Open valve
at tank fully by turning counter clockwise
.
Always
check
the
tank
and
hose
connection
before lighting.
3. Place
charcoal
on
tray
the
charcoal
and lower
tray
directly
over
burner.
4. Insert a match in the end of the match holder
that is installed on the inside
of the cabinet
door
and light the
match.
next to the 5.
Immediately
place
the lit match
FIG. 1
charcoal
ignition
burner on the inside front of
grill
(Fig
1). the
to the ON position.
ignition
knob counter-clockwise
6. Turn charcoal
minutes
it to burn for
approximately
5-10
then
7. Once
turn ignition knob
the burner is lit, allow
clockwise
to
the
OFF
position.
NOTE:
does not take
place
within
turn
the ignition control knob
immediately
5 seconds,
If ignition
5 minutes
repeat
steps
above.
clockwise
to the
and
4-7
OFF position.
Wait
begin
cooking
have
of grey
ash
You can
when
briquettes
a light coating
(approx. 25-30 minutes).
Adjusting Temperature
an
adjustable
By
turning
the charcoal tray can be
handle,
This grill has
charcoal
tray.
the
crank
raised or lowered to desired
height.
This
allows
for
different
heat
settings depending on the food
24
Dual Fuel Grill
OPERATION INSTRUCTIONS FOR CHARCOAL GRILL
you are cooking and the temperature you want to cook at. It also allows easy cleaning of the
interior of the firebox after the unit has cooled down completely. It is not recommended to raise
a fully loaded charcoal tray higher than the middle height setting.
NOTE: The grate is coated with porcelain which is a fragile coating. Handle with care to avoid
damage. Do not cool the grate in cold water while it is still hot or the coating may crack. Let the
grate cool off by itself.
For maximum heat/temperature, open both louvered air vents located on the grill lid as required.
To reduce the heat/temperature, close the air vents.
NOTE: The temperature should not go above 500ºF. If the temperature goes above 500ºF, you
should reduce the quantity of briquettes that you have placed in the charcoal tray. The proper
cooking temperature should not exceed 500ºF.
Seasoning Unit
1. Before your first cooking you should season the unit to enhance the cooking and to provide better
overall durability. Failure to properly follow these steps may damage the finish and/or impart metallic
flavors to your foods.
2. Remove all retail hangtags that are on the unit, making sure NOT to remove safety markings from
the unit.
• SEASON UNIT: before first cooking, place about 40 briquettes in the charcoal pan. Do not place
any briquettes against walls of the pan.
• Coat interior surfaces of charcoal grill only with vegetable cooking oil.
• Light briquettes and set ash pan at medium height by cranking the crank handle.
• Sustain burn for about two hours with lid closed and all dampers to 1/4 open. Allow the unit to cool
down properly.
• Once this is completed, the unit is ready for use.
Rust can appear on the inside of your grill. Maintaining a light coating of vegetable oil on interior
surfaces will aid in the protection of your grill. Exterior surfaces of the grill may need occasional
touch up. We recommend the use of commercially available black high temperature spray paint.
NEVER PAINT THE INTERIOR OF THE UNIT!
WARNING: These metal parts could be very hot while grilling. Always operate these parts
while wearing a heat-resistant glove.
Never use charcoal starter fluid, gasoline, kerosene or alcohol with an electric ignition.
Grilling
Charcoal is recommended as the fuel source for grilling, placed and ignited on the charcoal pan. Do
not build too large of a fire. We recommend starting a fire with no more than 3 pounds of charcoal
(approximately 55 briquettes) and adding more as needed during cooking. After allowing the fire to
burn down, place the cooking grates in the unit. Failure to read and follow instructions for lighting
charcoal may result in serious personal injury and or property damage.
25
Dual
Grill
Fuel
MAINTENANCE
CARE AND
&RRNLQJ*UDWHV
7KHEHVWWLPHWRµEXUQRII¶WKHFRRNLQJJUDWHVLVDIWHUHYHU\XVHDSSUR[PLQXWHV7KHJULOOLV
DOUHDG\KRWIURPFRRNLQJWKXVUHTXLULQJOHVVIXHOWRREWDLQQHFHVVDU\WHPSHUDWXUHIRUµEXUQRII¶
ZLWKWKHOLGFORVHG7KHQWXUQRIIWKHEXUQHUVDQGXVHDZLUHEUXVKWRFOHDQH[FHVVIRRGUHVLGXH
IURPWKHJUDWHV
7R³%XUQ2II´RUKHDWFOHDQ\RXUJULOOWXUQWKHEXUQHUVWRKLJKHVWSRVLWLRQDQGUXQIRUPLQXWHV
ZLWKWKHOLGFORVHG7KHQWXUQRIIWKHEXUQHUVDQGXVHDZLUHEUXVKWRFOHDQH[FHVVIRRGUHVLGXH
7KHSRUFHODLQJUDWHVKDYHDQHQDPHO¿QLVKVLPLODUWRJODVVDQGVKRXOGEH
Off” is NOT
necessary
for side
burner
or charcoal
burner.
IURPWKHJUDWHV
NOTE: “Burn
KDQGOHGZLWKFDUHQRWWRFKLS
The
should
handled
chip.
7KHSRUFHODLQJUDWHVKDYHDQHQDPHO¿QLVKVLPLODUWRJODVVDQGVKRXOGEH
finish
(similar
to
glass)
porcelain
grates
have
an
enamel
and
be
with
care
not to
2WKHU3DUWV
(QVXUHWKHJULOOLVFRROEHIRUHFOHDQLQJDQGFRQGXFWLQJ
PDLQWHQDQFHDQGZLWKWKHJDVVXSSO\WXUQHGRIIDWWKH/3*DVF\OLQGHU
one
“AA”
alkaline
The electronic ignition
requires
is
which
battery,
included.
5HFRPPHQGHG&OHDQLQJ6XSSOLHV
0LOGOLTXLGGLVKVRDSZDUPZDWHUQ\ORQFOHDQLQJSDGZLUHEUXVK
2WKHU3DUWV
(QVXUHWKHJULOOLVFRROEHIRUHFOHDQLQJDQGFRQGXFWLQJ
PDLQWHQDQFHDQGZLWKWKHJDVVXSSO\WXUQHGRIIDWWKH/3*DVF\OLQGHU
5HFRPPHQGHG&OHDQLQJ6XSSOLHV
0LOGOLTXLGGLVKVRDSZDUPZDWHUQ\ORQFOHDQLQJSDGZLUHEUXVK
'2127XVHFOHDQHUVWKDWFRQWDLQDFLGPLQHUDOVSLULWVRUDQ\DEUDVLYHVXEVWDQFH
2XWVLGH6XUIDFHV
,WLVUHFRPPHQGHGWRXVHRQO\PLOGGLVKVRDSDQGKRWZDWHUWRFOHDQJULOODQGJULOOSDUWV
5LQVHZLWKZDUPZDWHU
,QVLGH%RWWRP3DQRI*ULOO%RG\
7RDYRLGÀDUHXSVWKHERWWRPSDQRIWKHFRRNLQJER[VKRXOGEHNHSWFOHDQRQDUHJXODUEDVLV
5HPRYHUHVLGXHXVLQJDEUXVKVFUDSHUDQGRUFOHDQLQJSDG:DVKZLWKPLOGGLVKVRDSDQGZDUP
S J ZDWHU5LQVHZLWKZDUPZDWHU$YRLGZDWHUVSODVKLQJLQWRYHQWXUHWXEHVRIEXUQHUV
+HDW7HQWV
&OHDQUHVLGXHZLWKZLUHEUXVKDQGZDVKZLWKPLOGGLVKVRDSDQGZDUPZDWHU5LQVHZLWKZDUPZDWHU
*UHDVH&XS
(PSW\WKHJUHDVHFXSDQGFOHDQZLWKPLOGGLVKVRDSDQGZDUPZDWHURQDUHJXODUEDVLV
26 &$87,21
&$87,21
Dual Fuel Grill
CARE AND MAINTENANCE
Burner Assembly
Removing the Gas Burner Assembly
1. Make sure all control knobs
are in the OFF position, LP tank
valve is closed, and the tank is
disconnected from regulator and
removed from grill.
Warming Rack
Heat Tents
2. Open lid and remove warming
rack, cooking grates, and heat
tents.
3. Remove cotter pins at back of
burners to detach burners from
brackets.
Cooking
Grates
Cotter pins
Burner bracket
Burners
5. Detach ignition wire from ignition as
illustrated.
4. Slide burners out of firebox as
illustrated.
27
Dual Fuel Grill
CARE AND MAINTENANCE
Burner Assembly
Removing the Charcoal Ignition Burner
Warming Rack
1. Open lid and remove warming
rack, cooking grates, and charcoal
tray.
Cooking Grates
Charcoal Tray
2. Remove 2 attachment screws on
charcoal ignition burners, take out
the charcoal ignition burner.
3. Detach ignition wire from ignition
as illustrated.
28
Dual Fuel
Grill
CARE AND MAINTENANCE
Burner Assembly
Cleaning the Burner Assembly - Make sure the grill is cool
off at the control
and propane
tank.
1. Turn gas
knobs
2.Disconnect
LP-Gas
cylinder
from hose
and regulator.
3.Remove warming
rack,
cooking
grates,
and heat tents.
4.Detach burner
by removing
the cotter pins
at
the back of the burner to detach it from the brackets.
5.Detachignition wire
by hand
DO
from electrode
only.
NOT
use pliers
or any other
tool as it
may
damage
the
electrode
or
wire.
6.Lift burner
slowly.
7.
Ensure
all
burner
ports
are
clear
of
clogs.
Use
of
a
pin
or
paper
clip
works
well.
8.Ensure
burner
is free from any damage. If damage is found, replace with new burner.
9.Ensurethe end of the burner
of insect
and primary
air screen
are
clear
nests,
dirt, or debris.
Re-installing the Burner
• Ensure the gas valve orifices are correctly
burner inlet (venturi).
positioned inside
• The use of a flashlight may be necessary to
ensure the correct position.
recommended
correct position
• It is
to view the
through
vent
as illustrated.
the firebox
holes
Re-installing the Charcoal Ignition Burner
• Ensure the Charcoal valve orifices are correctly
positioned inside burner inlet (venturi).
• The use of a flashlight may be necessary to
ensure the correct position.
• It is recommended to view the correct position
through the firebox vent holes as illustrated.
• Attach ignition wire to electrode and attach
burner to brackets with cotter pins.
:$51,1*,IWKHLQVWUXFWLRQVDERYHDUHQRWIROORZHGD¿UHRU
H[SORVLRQPD\UHVXOWSRVVLEO\FDXVLQJVHULRXVERGLO\LQMXU\RUGHDWK
29
Fuel
Dual
Grill
CARE AND MAINTENANCE
&$5($1'0$,17(1$1&(
Checking&KHFNLQJ7KH)ODPH
The Flame (main burner only)
)RUPD[LPXPIXHOHI¿FLHQF\DQGFRRNLQJSHUIRUPDQFHÀDPHVKRXOG
EHDEOXH\HOORZFRORUDQGEHEHWZHHQLQFKHVKLJK
7RFKHFNWKHÀDPHYLHZWKHÀDPHWKURXJKWKHPDWFKOLJKWLQJ
KROHLQWKHVLGHRIWKH¿UHER[
<HOORZ
<HOORZ
/LJKW%OXH
´
/LJKW%OXH
%OXH
%OXH
*RRG)ODPH
%DG)ODPH
(main burner only)
2WKHU&DUHDQG0DLQWHQDQFH
,WLVUHFRPPHQGHGWKDWLQVSHFWLRQDQGVHUYLFHRQWKLVDSSOLDQFHEHFRQGXFWHG
DQQXDOO\E\DTXDOL¿HGVHUYLFHSHUVRQ
,WLVUHFRPPHQGHGWKDW\RXUHJXODUO\FKHFNWKDWWKHRXWGRRUFRRNLQJDSSOLDQFH
DUHDLVFOHDUDQGIUHHIURPFRPEXVWLEOHPDWHULDOJDVROLQHDQGRWKHUÀDPPDEOH
YDSRUVDQGOLTXLGV
,WLVUHFRPPHQGHGWKDW\RXUHJXODUO\FKHFNWKDWWKHÀRZRIFRPEXVWLRQDQG
YHQWLODWLRQDLULVQRWREVWUXFWHG
,WLVUHFRPPHQGHGWKDW\RXUHJXODUO\FKHFNWKDWWKHYHQWLODWLRQRSHQLQJVRIWKH
F\OLQGHUHQFORVXUHFDELQHWDUHIUHHDQGFOHDUIURPGHEULV
,WLVUHFRPPHQGHGWKDW\RXUHJXODUO\FKHFNDQGFOHDQWKHEXUQHUYHQWXULWXEHV
IRULQVHFWVDQGLQVHFWQHVWV$FORJJHGWXEHFDQOHDGWRD¿UHEHQHDWKWKHJULOO
30
Dual Fuel
Grill
TROUBLESHOOTING
Problem
No gas flow or an
obstructed gas flow.
The burner will not
light using the
ignitor procedure
(weak or no spark
being generated).
Possible Causes
Possible Solutions
tank valve
open
• Fully
fully opened.
by turning
valve not on or
• Tank
.
counterclockwise
• Check fuel level and replace
• Empty tank.
fuel if necessary.
• Poor connection
between
grill knobs, close the LP
• Turn off
valve
cylinder
regulator
and LP cylinder
at top of cylinder
value
and check the connection
coupling.
between the regulator valve
and cylinder coupling.
if
and reconnect,
Disconnect
necessary.
• Clean the burner inlet (venturi)
• Burner inlet blocked.
and burner as described by the
Care and Maintenance section
in the Manual.
• The ignition electrode may be
covered with grease or residue.
• Turn control knobs to the off
position and clean the ignition
electrode with rubbing alcohol
and cotton swab.
• The ignition electrode may have
a loose or disconnected wire.
• Check the connection and
reconnect any loose or
disconnected wires.
• Cracked or broken ignition
electrode.
• Replace ignition electrode (see
Replacement Parts List).
• Dead battery or faulty battery
connection.
• Perform any of the following:
a. Replace battery
b. Check to see if battery is
inserted correctly.
c. Check for any corrosion
around battery terminals.
d. Check wire connections as
stated above.
31
Dual Fuel Grill
TROUBLESHOOTING
Problem
The burner will not
light with a match.
Low Heat.
Possible Causes
Possible Solutions
• Match not reaching burners
(when holding match with hand).
• Use match holder found in
cabinet door.
• Empty tank.
• Check fuel level and refill tank if
necessary.
• Poor connection between valve
regulator and LP cylinder
coupling.
• Turn off grill knobs, close the LP
cylinder value at top of cylinder
and check the connection
between the regulator valve
and cylinder coupling.
Disconnect and reconnect, if
necessary.
• Burner inlet blocked.
• Clean the burner inlet (venturi)
and burner as described by the
Care and Maintenance section
in the Manual.
• The LP-Gas regulator is equipped
with an excess flow device that
allows sufficient gas to the burners
under normal circumstances.
Rapid changes in pressure can
trigger this device and prevent all
but minimal flow of gas to the
burner, causing a low flame and
low heat output. This is typically
caused by the LP-Gas cylinder
valve being turned open when
one or more burner valves
(control knobs) is in the open
position causing a surge of
pressure that activates the
excess flow device.
• Follow these steps:
32
1. Close the LP-Gas cylinder
valve on the top of the
cylinder.
2. Make sure the burner valves
are in the “OFF” position.
3. Slowly open the LP-Gas
cylinder valve and wait 10
seconds.
4. Follow the lighting
instructions.
Dual Fuel Grill
TROUBLESHOOTING
Problem
Excessive flare-ups.
Backlit bezel not
working.
Possible Causes
Possible Solutions
• Grease and/or residue build-up
on heat tents or in firebox.
• Clean the grill components.
• Excessive dripping of fat or
marinade from food.
• Trim the fat from meat and use
non-oil based marinades.
• Cooking temperature too high.
• Lower temperature accordingly.
• A loose or disconnected wire.
• Check the connection and
reconnect any loose or
disconnected wires.
• Dead battery or faulty battery
connection.
• Perform any of the following:
a. Replace battery
b. Check to see if battery is
inserted correctly.
c. Check for any corrosion
around battery terminals.
d. Check wire connections as
stated above.
33
Dual Fuel Grill
REPLACEMENT PARTS
For replacement parts, call our customer service department at 1-877-447-4768,
8:30 a.m. – 4:30 p.m., CST, Monday – Friday
16
1
17
17
8
5
4
8
5
9
9
7
18
12 10
18
11
3
2
14
16
6
15
17
17
14
12
50
38
39
40
36
37
19
55
58
60
22
20 20
21
43
44
49
19
47
45
48 48
69
67
46
68
71
61
72 68
75
65
64
59
41
42
66
79
77 80
63
75
74
73 65
64
13
70
66
59
76
82
82
81
81
34
78
62
Dual Fuel Grill
REPLACEMENT PARTS
For replacement parts, call our customer service department at 1-877-447-4768,
8:30 a.m. – 4:30 p.m., CST, Monday – Friday
22 Complete Sub-Assembly
50 Complete Sub-Assembly
51
23
24
52
25
53
34
31
54
33
26
31
57
30
35
29
32 32
28
56
27
DYNA-GLO DUAL FUEL GRILL - MODEL #DGP700SSB/DGP700SSB-D
Diag.
Ref #:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Warranty
Part #
Part Description
Gas Grill Lid Assembly - DOES NOT INCLUDE temp gauge / lid handle / lid handle bezels / badge
Lid Handle - Includes screws to attach and foam grip – package of 1
Lid Handle Bezel – package of 1
Badge – package of 1 – DynaGlo
Temperature Gage And Nut – package of 1
Charcoal Lid Assembly - DOES NOT INCLUDE temp gauge / lid handle / lid handle bezels / lid
damper gate / lid damper gate grip/ lid damper housing
Charcoal Lid Damper Gate Grip – package of 1
Charcoal Lid Damper Gate – package of 1
Charcoal Lid Damper Housing – package of 1
Main Gas Burner - Left - Includes 2 cotter pins to secure – package of 1
Main Gas Burner - Right - Includes 2 cotter pins to secure – package of 1
Ignition Electrode - Left or Right burner ignition – package of 1
LP Cylinder Exclusion - Includes screws to attach
Lid Pivot Pin - with cotter pin – for either left or right side outer hinge points – package of 1
Lid Pivot Pin - with cotter pin – for middle hinge point between the lids – package of 1
Warming Rack – for either Gas or Charcoal side – package of 1
35
211-02001
101-02001-03
101-02001-04
211-02002
211-02005
221-02001
221-02002
221-02003
221-02004
102-03003
102-03004
102-03013
201-05001
201-02001
201-02002
102-03012
Dual Fuel Grill
REPLACEMENT PARTS
DYNA-GLO DUAL FUEL GRILL - MODEL #DGP700SSB/DGP700SSB-D - Continued
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
Cooking Grate – for either Gas or Charcoal side – package of 1
Heat Tent - Gas Side – package of 1
Control Knob – small – for side burner or charcoal ignition burner – package of 1
Control Knob – large – for Gas side main burners – package of 1
Bottle Opener - Includes screws to attach – package of 1
Firebox Assembly COMPLETE - INCLUDES lid bumpers / valve & manifold assembly / hose &
regulator / control panels / control panel bezels / electronic ignition / ignition wires and electrodes.
Firebox Assembly - INCLUDES lid bumpers
Gas Control Panel - Includes screws to attach
Charcoal Control Panel - Includes screws to attach
Charcoal Adjustment handle bracket - Includes 2PCS M6x12 Screw to attach
Hose And Regulator – Liquid Propane
Gas Manifold With Valves – Liquid Propane - INCLUDE screws to attach
Electronic Ignition Cover
Electronic Ignition – includes electronic ignition cover
Control Knob Bezel – Small for side burner and charcoal ignition burner – package of 1
Control Knob Bezel – large for gas side main burners – package of 1
Ignition Wire – for left or right gas side main burners – package of 1
Ignition Wire – for charcoal ignition burner – package of 1
Ignition Wire – for side burner – package of 1
Grease Pan – includes LP cylinder heat shield
Grease Cup
Charcoal Tray
Charcoal Tray Housing – includes 2 pieces of ‘R’ PIN , 4PCS AXLE PIN
Charcoal Tray Housing Upper Connecting Rod – package of 1
Charcoal Tray Adjustment Assembly
Charcoal Ignition Burner – package of 1
Ignition Electrode - charcoal ignition burner – package of 1
Ash Collector Frame
Charcoal Tray Adjustment Handle – includes cotter pin
Ash Tray
Ash Tray Heat Shield
Ash Tray Handle - includes screws to attach to ash tray – package of 1
Right Side Shelf Assembly
COMPLETE side burner assembly
Side Burner Cover- includes bumper
Side Burner Cover Axle
Side Burner Grate
Side Burner with Venturi Tube - includes screws to attach
Side Burner Valve Retaining Bracket - includes 2PCS M4x10 Screw
Left Side Shelf
Ignition Electrode - Side Burner – package of 1
36
101-03011
101-03005
102-03011
102-03009
201-03003
201-03001
201-03002
211-03001
221-03001
221-03002
102-03008
211-03002
201-03004
201-03005
103-03014
102-03010
103-03017
221-03003
103-03019
102-04013
102-04014
221-03004
221-03005
221-03006
221-03007
221-03008
221-03009
221-03010
221-03011
221-03012
221-03013
221-03014
103-04001
201-04001
103-04004
201-04002
103-04006
103-04005
201-04003
103-04003
103-03022
Dual Fuel Grill
REPLACEMENT PARTS
DYNA-GLO DUAL FUEL GRILL - MODEL #DGP700SSB/DGP700SSB-D - Continued
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
Left Door Hinge – package of 1
Door Stopper – package of 1
Cart Front Door Assembly - Left – does not include door handle
Cart Front Door Assembly – Right – does not include door handle
Right Door Hinge
Match Holder - With chain and screw to attach
Cabinet Door Handle – package of 1
Cabinet Door Handle Bezel – package of 1
Cabinet Door Handle Sleeve – package of 1
Cart Left Side Panel
Cart Rear Panel – package of 1
Upper Front Door Brace
Cart Right Side Panel
Cart Middle Cross Beam
LP Cylinder Heat Shield
Cart Rear Vertical Beam
Cart Front Vertical Beam
Magnet (Door Latch) – package of 1
Cabinet Bottom Shelf End Cap – Left - includes screws to attach
Cabinet Bottom Shelf
Cabinet Bottom Shelf End Cap – Right - includes screws to attach
LP Cylinder Retention Plate- includes screws to attach
LP Cylinder Retention Screw
Caster - Includes 4 screws/flat washers/spring washers – package of 1
Locking Caster - Includes 4 screws/flat washers/spring washers – package of 1
Instruction Manual
HARDWARE
# Description
Figure
A M6x12 Screw
B 6mm Flat Washer
C 6mm Spring Washer
D M4x10 Screw
E M6x20 Screw
F M6x16 Screw
G M5x10 Screw
H M6x25 Screw
I
Cotter Pin – for use with lid hinge pins
COMPLETE Hardware Pack
37
201-05002
201-05003
201-05004
201-05005
201-05006
101-04019
102-04016
102-04020
102-04021
102-04009
101-04006
201-05007
103-04010
201-05008
201-05009
201-05010
201-05011
101-04020
201-05012
201-05013
201-05014
210-05015
201-05016
103-04018
103-04017
201-06001
101-01021-01
101-01021-07
101-01021-06
101-05001-01
101-05001-02
101-05001-03
101-05002
101-01021-04
201-02003
201-06002
Dual Fuel Grill
LIMITED WARRANTY
Item Name: Dual Fuel Grill
Model #: DGP700SSB/DGP700SSB-D
Rated BTU: 54,000 BTU/Hr
Product Dimension Assembled: L 66.8" x W 28" x H 46"
or L 1698mm x W 710mm x H 1170mm
Product Weight: 168.98bs. or 76.8kg
This Dual Fuel Grill is warranted against broken or damaged parts at the
time of purchase. All parts carry a one (1) year limited warranty. Paint is
warranted to be free of defects for 90 days except for rust, which may
appear after repeated use.
This warranty does not cover damage or issues related to neglect, abuse
or modifications to the appliance. Repair labor is not covered.
All parts that meet the warranty requirements will be shipped at no charge
via the discretion of GHP Group Inc. (ground shipments, US Mail or Parcel
Post ONLY). Any special handling charges (i.e. Second Day, Over night,
etc.) will be the responsibility of the consumer.
All warranty claims apply only to the original purchaser and require a proof
of purchase verifying purchase date. Do not return parts to the GHP Group
Inc. address without first obtaining a return authorization number from our
customer service department.This service is available by calling toll free:
1-877-447-4768, 8:30 am to 4:30 pm CST, Monday through Friday.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights, and you may have other rights that vary
from state to state.
GHP Group Inc.
8280 Austin Avenue
Morton Grove, IL USA 60053-3207
Toll Free: 1-877-447-4768
Printed in China
38