BM3 Access Control Door entry phone for PABX z Analog extension for the PABX system z Includes button for hotline function, CCTV control and tamper switch BM3 is a smart and cost-efficient Bewacom door entry phone that connects to a company’s existing PABX internal telephone system in just the same way as any other extension in that system. The BM3 makes it possible to unlock the main entrance door, for example, via the press of a button at any of the telephone extensions that are connected to the company’s internal telephone system. Installation is fast and easy with minimal cabling required. The BM3 also has a built-in codelock with four codes, two of which can be set so that they are only valid during certain times of the day or week. The major advantage of the codelock function is that it allows you to set codes that employees or special visitors can use to enter the building, rather than having to call someone who is already inside to buzz them in. The BM3 also includes a tamper switch and an output for camera control. The tamper switch is very useful in that it can be used together with the SK5 security unit to eliminate the possibility of opening the lock by using battery power directly on the lock cables. A video surveillance camera can be connected to BM3 via its output for camera control. The BM3 can trigger the camera to start filming as soon as a visitor pushes a call button on the BM3, for example. This video can either be viewed on a connected monitor directly by the person who picks up the call (the receptionist, for example), or it can simply be saved in the video surveillance log and viewed later, if required. Building Technologies Fire Safety & Security Products Technical data Interface Operating voltage Current consumption Inputs Outputs Calling time Opening time Code capacity Operating temperature Environment IP rating Housing Dimensions (W x H x D) BM3 Two analog extension cables for PABX 12 to 24 VAC/DC 60 mA in standby Exit button request with delay. Two inputs for disabling respective codes. Voltage-free relay contact, max. 2 A 28 VDC. Tamper switch for alarm (normally closed). Relay for control of CCTV system. 1-99 seconds (can be extended x10) 1-99 seconds programmable from keypad (can be extended x10). Four -35 to +50 °C. At 90% relative air humidity. Indoor or outdoor use. In very exposed locations, use SH3 or SH1 rain cover. IP54 Cast metal with stainless steel buttons and security lock. For flush mounting, use BB5 flush mounting kit. 80 x 200 x 40 mm Details for ordering Type BM3 Issued by Siemens Building Technologies Fire & Security Products GmbH & Co. oHG D-76181 Karlsruhe www.buildingtechnologies.siemens.com Document no. A6V10081708 Edition 05.2009 Part no Designation S24246-C7900-A1 Door entry phone for PABX Weight 1.11 kg © 2009 Copyright by Siemens Building Technologies Fire & Security Products GmbH & Co. oHG Data and design subject to change without notice. Supply subject to availability.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project