LCM-IE Data Sheet
Data Sheet
C Series Contactor Based
LCM-IE
PROJECT
INTERIOR / EXTERIOR
Lighting Control System
LOCATION
FEATURES
APPLICATIONS
•
•
•
•
Aircraft Hangars
Gymnasiums
Offices
Parking Decks
•
•
•
•
Parking Lots
Retail Outlets
Schools
Warehouses
• 2, 3, 4 or 6 individual zones, each with Photo Control,
Time Clock Scheduling, Remote Switching and Timed
Override with after hours Sweep Sequence
• Factory-preprogrammed, field-configurable controller
offers eight configuration modes per zone
• Menu-driven LCD screens and front control buttons
allow for easy adjustment of ON and OFF set points
Fuse
Power Supply
• Accumulated run time hours are logged
• 20A zone relays include integrated HAND-OFF-AUTO
(HOA) switches
Switch &
Sensor Inputs
• Load switching options are available with factory wired
4 or 8-pole 20A lighting contactors
Controller
• Base panel accommodates up to one photodiode sensor
per zone, available in Indoor, Outdoor, Atrium and
Skylight configurations
24V accessories
power terminal
Zone Outputs
• Photo mode can be configured for setup (no timers)
or auto (full program)
• Photo sensor input time delay prevents intermittent
or false switching
20A zone relays
with integrated
HAND-OFF-AUTO
(HOA) switch
• Adjustable hold-on timer prevents HID lighting from
short-cycling
DIN rail for
available load
switching options
• Compliant to Title 24
• Time Clock configurable as 7-day with two ON /OFF
events per day; or 7-day with Timed Override and
Sweep Sequence
• 2-year warranty
DESCRIPTION
The LCM-IE series control panel is a cost-effective and easily
configurable stand-alone contactor-based lighting control
system with programming specifically optimized for basic
interior and/or exterior applications. It is capable of
supporting 2, 3, 4 or 6 zones with photo control, basic time
clock, remote switching and timed override with sweep
sequence programs for each zone.
A maximum of four (4) contactors can be accommodated in
each 2- or 3-zone and six (6) contactors in each 4- or 6-zone
main panel. In addition, up to twelve (12) contactors are available
in each expansion panel. Contactors are available in 4- and
8-pole configurations.
The four line LCD screen prompts the user to enter photo sensor
set point limits and time schedules which are saved in flash
memory. Adjustments to the settings and schedules can be
made with pushbuttons on the controller face.
Timed functions are controlled by an internal real-time clock.
The battery-backed clock is accurate to one second per month
and can be adjusted for drift. Timed circuits are automatically
adjusted for daylight savings time and leap year unless
otherwise specified.
The LCM-IE series advantages include stability, versatility,
quality and accuracy. Once mounted, the sensor, power, and
lighting loads need only to be wired and the LCM is ready to
operate. The system controller has specific application control
strategies that are matched with the appropriate sensor to
create optimal packaging and system efficiency.
Distributed by:
Eco-$mart, Inc.
TOLL FREE: (888)329-2705
FAX: (941)377-9460
info@eco-smart.com
www.eco-smart.com
301_LCM-IE_R.1_7-12-10
A Division of PLCMultipoint
TECHNICAL DATA - LCM-IE SERIES
Operating Temperature:
Approvals:
120VAC or 277VAC
Two-,three-, four- or six zone relays controlling optional 20A
(4- or 8-pole) lighting contactors
Displayed on LCD mode screen:
SETUP: Photo set point control - No timers
AUTO: Photo sensor control with timers (ON at low, OFF at high set points)
Photo sensor: 60-seconds (setup mode override)
Time clock: 30-minutes (setup mode override)
Internal Hand - Off - Auto (HOA), integrated in zone relay
CES Style 1-10V Photosensor; low voltage momentary ON/OFF Remote Switch(s)
2- or 3-Zone: 16”H x 12”W x 6”D (NEMA-1 Surface Mount Enclosure)
4- or 6-Zone: 18”H x 18”W x 6”D (NEMA-1 Surface Mount Enclosure)
32° to 104°F (0° to 40°C)
Compliant with Title 24 ; UL508A
Optional AEG Contactor Rating:
General Purpose:
Lighting Ballast:
Tungsten load (general lighting)
30A/600V
30A/ 600V
20A/277V
Input Voltage:
Output Zones:
Control Modes:
Input Time Delay:
Hold-On-Timer:
Override Switch:
Control Inputs:
Enclosure Dimensions:
ZONE PROGRAMMING CONFIGURATION MODES
Code Description
1
2
3
4
5
6
7
8
Key Application(s)
Exterior - Photo Control
Exterior - Time Schedule
Exterior - Photo Control + Time Schedule
Interior HID - Time Schedule + Remote Switch
Interior HID - Photo Control + Time Schedule + Remote Switch
Exterior - Photo Control w/ Maintenance Timed Override
Interior - Time Schedule + Remote Switch + Sweep Sequence
Interior - Photo + Time + Remote Switch + Sweep Sequence
Security lighting
Canopy lighting
Sign lighting
General lighting; suitable for HID applications
Atriums, skylights; suitable for HID applications
Enhanced security, sign lighting
Interior Time Schedule, daylight harvesting
Interior, daylight harvesting, exterior lighting
CONNECTION DRAWING (TYPICAL 3 ZONE)
ORDERING INFORMATION
LCM-IE -
-
Number of Zones
2Z
3Z
4Z
6Z
Distributed by:
OPTIONS / ACCESSORIES
Voltage Input
120
277
See LCM-Series Accessories Selection Matrix
Eco-$mart, Inc.
TOLL FREE: (888)329-2705
info@eco-smart.com
www.eco-smart.com
301_LCM-IE_R.1_7-12-10
A Division of PLCMultipoint
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising