INSTALLATION INSTRUCTIONS Accessory Application SHIFT KNOB P/N 08U92-S6M-200A (5 SPD) P/N 08U92-S6M-200B (6 SPD) 2005 RSX PARTS LIST Shift knob Publications No. BII 27774 Issue Date AUG 2004 INSTALLATION 1. Push down the plastic top of the boot with both hands, and remove the shift knob by turning it counterclockwise. Flange nut SHIFT KNOB Wire tie PLASTIC TOP (Push down.) BOOT Collar 2. Pry up on the six clips and remove the center console trim. Take care not to damage the clips. Ring CLIPS (6) CENTER CONSOLE TRIM TOOLS AND SUPPLIES REQUIRED Phillips screwdriver 14 mm Combination wrench Utility knife Diagonal cutters © 2004 American Honda Motor Co., Inc - All Rights Reserved. BII 07774 (0408) 08U92-S6M-2001-91 1 of 2 3. Push the boot so it's inside out. RING (Discard.) 7. Return the boot to its original position. 8. Fit the retaining tabs on the collar into the grooves on the ring by squeezing them with your hand. Check that the retaining tabs on the collar are set well into the ring grooves. To prevent damage to the retaining tabs, do not remove the collar once it is installed on the ring. WIRE TIE RETAINING TAB UTILITY KNIFE BOOT (Turn inside out.) COLLAR RING RING GROOVE BACK OF CONSOLE TRIM 4. Using a utility knife, cut off the wire tie. Take care not to damage the boot when cutting the wire tie. 5. Insert the ring from the kit into the opening of the boot with the wrinkled leather end of the ring facing down. WRINKLED LEATHER END (Install with this end facing down.) Trim away the excess length. RING WIRE TIE BACK OF CONSOLE TRIM BOOT 9. Reinstall the console trim. 10. Install the flange nut on the shift lever, flat side up, to the end of the threads. RING SHIFT KNOB BOOT FLANGE NUT WIRE TIE SHIFT LEVER SHIFT KNOB FLANGE NUT (Tighten.) HOLE in BOOT 6. 2 of 2 Secure the boot to the ring with the wire tie as shown. 11. Install the shift knob on the shift lever until it is tight, then place it in the correct location, and tighten the flange securely. BII 27774 (0408) © 2004 American Honda Motor Co., Inc - All Rights Reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project