Wiring manual
Digital Lighting Systems
PWM-R11
www.digitallighting.com
User's Manual - Page 1
PWM Dimmer repeater
1 Ch. 10 A. Max @ 8-24 VDC
1
Made in USA
Ÿ PWM-R1 repeaters / amplifiers are used to synchronize any Pulse Width Modulated PWM dimmer output with multiple loads
without the need to have control cables.
Ÿ PWM-R11 repeaters / amplifiers are used to control an indefinite number of LED VDC lights loads that are connected to different
power supplies.
Ÿ PWM-R11 connect in tandem from load to load or in parallel sharing the same signal from the output of a master PWM Dimmer .
Ÿ Optically isolated Output totally isolates the different power supplies and reproduces the PWM with a precision of 99.9%.
From power Supply
8-24 VDC
Negative
Input:
Positive +
1 Pulse Width Modulated input
Sinking Negative
Positive Common
Negative
Voltage range : 8-24 VDC
Input from
Maximum Input Load Current : 20 mA. PWM dimmer
or
previous load
+ Positive
-
Linear Tandem installation
Output:
-
1 Pulse Width Modulated output
Sinking Negative
Positive Common
Voltage range : 8-24 VDC
Load Current :10 A Max.
Common
+
-
Negative
Output
To LEDs
or other VDC lights
Optically isolated
Power
Supply
Power
Supply
Power
Supply
Power
Supply
Power
Supply
VDC
VDC
VDC
VDC
VDC
AD110-A10
Pulse Width
Modulation
PWM Dimmer
LED linear strip
PWM
-R11
LED linear strip
PWM
-R11
LED linear strip
PWM
-R11
LED linear strip
PWM
-R11
LED linear strip
PWM
-R11
Parallel installation
Output to LED
or other
VDC lights.
Output to LED
or other
VDC lights.
Output to LED
or other
VDC lights.
Output to LED
or other
VDC lights.
Output to LED
or other
VDC lights.
Output to LED
or other
VDC lights.
Output to LED
or other
VDC lights.
Output to LED
or other
VDC lights.
Power
VDC
Supply
Power
VDC
Supply
Power
VDC
Supply
Power
VDC
Supply
Power
VDC
Supply
Power
VDC
Supply
Power
VDC
Supply
Power
VDC
Supply
Power
VDC
Supply
Power
VDC
Supply
12302 SW 128th ct, Miami , Florida 33186 , USA
Copyright
Tel: 305-969-8442
2012 Digital Lighting Systems, All rights Reserved Specifications are subject to change without notice. Printed in U.S.A.
PWM
-R11
Control wiring 2 conductors connects output of dimmer ot all repeaters ( 1 positive common; 1 Negative dim leg )
PWM
-R11
PWM
-R11
PWM
-R11
PWM
-R11
PWM
-R11
PWM
-R11
PWM
-R11
PWM
-R11
Pulse Width
Modulation
PWM Dimmer
Output to LED
or other
VDC lights.
PWM
-R11
AD110-A10
Output to LED
or other
VDC lights.
Connects to other PWM-R11 units
PWM-R11-UM
06/12
Digital Lighting Systems
PWM-R11
www.digitallighting.com
User's Manual - Page 2
PWM Dimmer repeater
1 Ch. 10 A. Max @ 8-24 VDC
1
Made in USA
Board dimensions and Mounting foot print:
1.600"
.475"
.100"
0.95"
2.650"
.650"
2.850"
.100"
PWM-R11
1.60"
Typical mounting
height clearance with
0.25” spacers standoffs.
.650"
PC Board Mounting holes size:
diameter= .115 ( # 4 screw)
12302 SW 128th ct, Miami , Florida 33186 , USA
Copyright
Tel: 305-969-8442
2012 Digital Lighting Systems, All rights Reserved Specifications are subject to change without notice. Printed in U.S.A.
PWM-R11-UM
06/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising