Maximize your Investment!
Micro Motion ® Coriolis Short Course
Course 2339C
Course Length/Location: Half day course offered at a Customer Site or as a Public Registration Class. This class is
intended to be taught as two ½ day repeat sessions on a given day. Therefore, it is for students that have limited time, or
for customers who need to train their entire department, but must also maintain the operation of their plant by splitting their
employees between the AM/PM sessions.
$3400 (for up to 20 people) + Expenses $400/person (inclusive) Customer Specified Site
Public Registration Class
Learning Objectives:
After attending this course the student will be able to do the following:
Briefly be able to explain the principle of operation for how a Micro Motion Coriolis meter works and the function of the
key components
Have a basic understanding of the installation best practices for orienting, mounting and wiring the sensor and
Be able to perform a basic configuration of the metering system to measure flow, density and temperature for the
Be able to apply a step-by-step process to diagnose and correct common meter and process issues
This half day course is a condensed version of the 2358 course. This course briefly reviews the theory of operation, meter
components and installation. The focus of the class is to provide a hands-on experience configuring the Micro Motion
metering system. Students will learn the Series 1000/2000 transmitters using one of these configuration tools: ProLink
III, HC475, AMS Device Manager or the local operator interface. Public classes typically use ProLink III. Customers can
choose which device is used for classes held at their site.
This being a four-hour class, some prior experience working with Micro Motion meters is recommended. Students with no
prior experience can also benefit from this course to provide a basic introduction. However, a basic understanding of the
fundamentals of flow measurement, electricity, analog & frequency signal processing are assumed.
Target Audience:
This half day course is intended as a refresher, or a four hour introduction for anyone that is involved with properly installing,
wiring, configuring and troubleshooting a Micro Motion Coriolis flow and density meter. Typical job functions include:
maintenance technicians, instrument technicians and instrumentation engineers.
Cancellations: If your plans or budgets change, you may cancel your reservations up to 14 calendar days prior to the start
of the course without incurring a cancellation charge. Limited enrollment makes it necessary to charge 50% of the full tuition
for cancellations received during the 14 days prior to the start of the course, and full tuition for failure to attend without
cancelling. Substitutions are accepted until the first day of class.
Emerson Educational Services
800 338 8158 or 641 754 3771
Email: [email protected]
Website: www.emersonprocess.com/education
MC-001806 Rev B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF