MPE 3 - MX electronic weighing

MPE 3 - MX electronic weighing
Getting your wires crossed
is a thing of the past ...
Wireless technology truly changes your day-to-day life
from now on,
when you need to weigh your animal feed supplies,
go wireless
MX MPE 3, WIRELESS AND HIGHLY FUNCTIONAL,
OFFERS A FULLY PORTABLE DEVICE, WHICH IS
EASY TO USE FOR ALL WEIGHING REQUIREMENTS
In the cab,
positioned wherever you want it
Outside,
while manually loading the bucket
FUNCTIONS
Easy to handle
Weighing in static and dynamic mode.
wo pressure sensors used during raising and lowT
ering allow accurate and stable calculation of
weight. The dual sensors also mean the MPE 3 can
be used on tractors with Load Sensing hydraulic circuits and loaders with double acting lowering.
In total, there are 11 channels of which 4 can be used
in dynamic and static mode. This gives 15 possible
weight measurements.
here are two channel groups purposely designed
T
for use with a feeding bucket, both groups have an
initial channel for weighing the bulk feed, with additional channels to weigh concentrates, and a final
channel to monitor the discharge of the feed.
he weight of each feed ingredient can be added
T
manually or automatically per channel, with a
separate display showing the accumulated weight.
sound alarm beeps gradually until you reach the
A
load limit you have set. You no longer need to keep
your eyes glued to the display screen, allowing you
to fully concentrate on the task at hand.
Around your neck,
when you’re on the move
Hands free,
the sound alarm guides you
operation
Calculator with
integrated position
sensor (Transmitter)
Load
Pressure caused
by the load
2 well-protected pressure
sensors
MX MPE 3, WEIGHING TECHNOLOGY THAT IS SIMPLE
TO INSTALL AND EASY TO USE!
A
ssembly is very simple. As it is lightweight, there is no need to fit a support in the cab. In
addition, with its wireless radio frequency link between the transmitter and the receiver no
holes have to be drilled in the cab to root cables.
T
he same console can be used for a 2nd tractor/loader. All you have to do is move the console
from one cab to the next and it automatically restores the link with the loader.
efining parameters for the MPE 3 depending on the tool is simple, and does not require
D
intervention by a technician.
CHARACTERISTICS
Residual
pressure
Console which receives
information from the calculator
(Receptor)
S ize: 14.5 x 9 x 3 cm
Weight: 240 g
Charge life: 30 minutes (at full capacity)
M aximum range: 20 metres
Increments: 5 kg
Accuracy : +/-1 % of maximum load
M aximum load accumulation: 99 999 kg
2 pressure sensors 0-200 bars
Position sensor (for dynamic mode)
Loader positioning indicator
(for stationary mode)
Back-lit display
Hook eyelet and neck attachment
30/1 UK - This documentation does not represent in any way
a contractual document. Reproduction, in full or in part, is
forbidden.
www.m-x.eu
19, rue de Rennes
BP 83221
F-35690 Acigné
Tel: +33 (0)2 99 62 52 60
Fax: +33 (0)2 99 62 50 22
E-mail: contact@m-x.eu
© Copyright Mailleux company
$FSUJmDBU/¡(
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising