Liquid & Slurry Pipeline Integrity Products Solid & Powder Corrosion Coupon Holders Steam & Water Sentry M-1A Gas description Sentry® Pipeline Integrity Products insertable & retractable tool holders offer ease of use and custom configuration for maximum versatility. These tool holders can hold corrosion coupons to measure corrosion within a pressurized process such as a pipeline. models M-1A Corrosion Coupon Holder benefits The hand-insertable Sentry M-1A has a maximum operating pressure (MOP) of 1000 psi (69 bar) [1440 psi (99 bar) product design pressure or MAOP] for medium pressure applications. It also can be mounted in any orientation needed for hard-to-access application situations. features Process pressure bleeder valve Large ergonomic hand knob for easy insertion Low profile Patented locking collet safely secures the shaft within the process stream until released by the operator Integrated safety chain Complies with NACE MR0175/2009 and is suitable for service in hydrogen sulfide (H2S) environments Designed and manufactured in accordance with ASME B31.3 and provided with Canadian Registration Number Corrosion coupon holders: Rod (cylinder), flat (strip) single hole, flat (strip) dual hole or disc, all with 1/4-20 in hardware. Process connection can limit coupon choices – contact Sentry Equipment Corp if other coupon holder configurations are required Manufactured under one or more U. S. patents: 6,357,470 B1; 8,359,937 B2 966 Blue Ribbon Circle North, Oconomowoc, WI 53066 | +1-262-567-7256 | email@example.com | www.sentry-equip.com Pipeline Integrity Products > Insertable & Retractable Tool Holders > Sentry M-1A Standard Available Tips S-PI-SPS-00065-3 7-15 specifications weight Ranges from 5 to 10 lbs (.5 to 4.5 kg) depending on configuration materials All process wetted parts, 316/316L SS; other alloys available pressure rating 1000 psi (69 bar) MOP at 100°F (37.7°C) – limit for safe hand insertion; 1440 psi (99 bar) MAOP at 100°F (37.7°C) product design pressure temperature rating Minimum seal operating temperature -90°F (-67°C); maximum seal operating temperature 450°F (232.2°C) with Teflon seal or 1000°F (537.7°C) with adjustable graphoil seal process connection 1/2 in, 3/4 in, 1 in, 1-1/2 in or 2 in male NPT connection standard; ASME RF or RTJ or API flanged connections available insertion depth Up to 8 ft (2.4 m); standard insertion depths of 10 in (25 cm), 16 in (41 cm), 22 in (56 cm), 28 in (71 cm), 34 in (86 cm) or 40 in (102 cm) insertion rod/shaft 1/4 in OD 966 Blue Ribbon Circle North Oconomowoc, WI 53066 U.S. +1-262-567-7256 firstname.lastname@example.org www.sentry-equip.com It is solely the responsibility of end users, through their own analysis and testing, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied and properly maintained, and to limit their use to their intended purpose. Improper selection, installation, or use may result in personal injury or property damage.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project