PS-XGSW-28040_v1.0
Product Specification of XGSW-28040
CONFIDENTIAL
Product Specification
24-Port 10/100/1000Mbps with 4 Shared SFP
+ 4-Port 10G SFP+ Managed Switch
XGSW-28040
Version 1.0
This document contains confidential proprietary information and is property of PLANET. The contents of this
document should not be disclosed to unauthorized persons without the written consent of PLANET.
Change History:
Revision:
Date:
Author:
Change List
Version 0.9
2012/05/16
Neo Tsai
Draft version
Version 1.0
2012/08/16
Neo Tsai
Initial release
Author:
Neo Tsai
Editor:
Neo Tsai
Reviewed By:
Kent Kang
Approved By:
Tom Shih
Filename: PS-XGSW-28040_V1.0.doc
Page 1 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL
1. PRODUCT DESCRIPTION
Cost-effective 10Gbps Uplink Capacitated Managed Switch Solution for SMB
The XGSW-28040 is PLANET’s first Layer 2 IPv6 / IPv4 management Gigabit switch built in with four 10Gbps uplink slots to
greatly support SMB network achieve 10Gbps high performance in a cost-effective way because 10GbE interface usually could
be available in Layer 3 Switch but Layer 3 Switch could be too expensive to SMB. The four 10Gbps SFP+ interfaces in the
XGSW-28040 is in the same size as commonly seen Gigabit SFP slot and also is the main standard for 10Gbps transceiver.
The XGSW-28040 can work with PLANET ENW-9800 Dual 10Gbps SFP+ PCI Express Server Adapter series or the third brand
10Gbps server adapter to help SMB build up 10Gbps Ethernet network providing 10Gbps NAS (Network Attached Storage) or
heavy transmission of video streaming service at affordable price. Each of the SFP+ slot supports Dual-Speed,
10GBase-SR/LR or 1000Base-SX/LX; that means, the administrator now can flexibly choose the suitable SFP/SFP+
transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.
IPv6 Managed Gigabit Switch Solution for SMB
Nowadays, lots of electronic products or mobile devices can access to the Internet, which means the need of IP Address
increases. However, the current IPv4 network infrastructure is not capable enough to provide IP Address to each single users /
Clients. The situation forces the ISP to build up the IPv6 (Internet Protocol version 6) network infrastructure speedily. To fulfill
the demand, PLANET releases the IPv6 management Gigabit Ethernet Switch, the XGSW-28040 which can work with
original IPv4 network structure and also support IPv6 network structure in the future. With easy and friendly management
interfaces and plenty of management functions included, the XGSW-28040 is the best choice for ISP to build the IPv6 FTTx
edge service and for SMB to connect with the IPv6 network.
High Performance
The XGSW-28040 provides 24 10/100/1000Mbps Gigabit Ethernet ports with 4 shared 100/1000X SFP slots plus 4 10G/1G
SFP+ slots. It boasts high performance architecture of switch that is capable for providing the non-blocking switch fabric and
wire-speed throughput as high as 128Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing
Filename: PS-XGSW-28040_V1.0.doc
Page 2 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL
bandwidth demands.
Robust Layer 2 Features
The XGSW-28040 can be programmed for advanced switch management functions such as dynamic Port link aggregation,
Q-in-Q VLAN, private VLAN, Rapid Spanning Tree protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD
Snooping. In addition, it provides 802.1Q Tagged VLAN, and allows maximally up to 255 VLAN groups. Via aggregation of
supporting ports, the XGSW-28040 allows the operation of a high-speed trunk combining multiple ports. It enables maximum up
to 14 groups of 8 ports for trunking, and supports fail-over as well.
Excellent Traffic Control
The XGSW-28040 is loaded with powerful traffic management and QoS features to enhance connection services by SMB. The
QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limiting that are particular useful for multi-tenant unit,
multi business unit, Telco, or Network Service Provide applications. It also empowers the enterprises to take full advantages of
the limited network resources and guarantees the best performance in VoIP and Video conferencing transmission.
Efficient Management
For efficient management, the XGSW-28040 Managed Ethernet Switch is equipped with console, WEB and SNMP
management interfaces. With the built-in Web-based management interface, the XGSW-28040 offers an easy-to-use,
platform-independent management and configuration facility. It also supports standard Simple Network Management Protocol
(SNMP) and can be managed via any standard-based management software. For text-based management, the XGSW-28040
can be accessed via Telnet and the console port. Moreover, the XGSW-28040 enables secure remote management by
supporting SNMP v3 connection which encrypts the packet content at each session.
Powerful Security
The XGSW-28040 offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can
be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined
typical network applications. Its protection mechanism also comprises of 802.1x Port-Based and MAC-Based user and device
authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.
The network administrators can now construct highly secured corporate networks with considerably less time and effort than
before.
Flexibility and Extension Solution
The four mini-GBIC SFP slots built in the XGSW-28040 support Dual-Speed, 100Base-FX and 1000Base-SX/LX SFP (Small
Form-factor Pluggable) fiber-optic modules, that means, the administrator now can flexibly choose the suitable SFP transceiver
according to the transmission distance or the transmission speed required to extend the network efficiently. The distance can be
extended from 550 meters (Multi-Mode fiber) up to above 10/50/70/120 kilometers (Single-Mode fiber or WDM fiber). They are
well suited for applications within the distribution SMB.
2. PRODUCT FEATURES

Physical Port
 24-Port 10/100/1000Base-T RJ-45 copper
 4 100/1000Base-X mini-GBIC/SFP slots, shared with Port-21 to Port-24 compatible with 100Base-FX SFP
 4 10GBase-SR/LR SFP+ slots, compatible with 1000Base-SX/LX/BX SFP
Filename: PS-XGSW-28040_V1.0.doc
Page 3 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL
 RS-232 DB9 console interface for basic management and setup

Layer 2 Features
 Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
 High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
 Storm Control support
 Broadcast / Unicast
 Supports VLAN
 IEEE 802.1Q Tagged VLAN
 Up to 256 VLANs groups, out of 4095 VLAN IDs
 Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
 Private VLAN Edge (PVE)
 Protocol-Based VLAN
 MAC-Based VLAN
 Voice VLAN
 Supports Spanning Tree Protocol
 STP, IEEE 802.1D Spanning Tree Protocol
 RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
 MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
 BPDU Guard
 Supports Link Aggregation
 802.3ad Link Aggregation Control Protocol (LACP)
 Cisco ether-channel (Static Trunk)
 Maximum 14 trunk groups, up to 8 ports per trunk group
 Up to 16Gbps bandwidth (Duplex Mode)
 Provides Port Mirror (many-to-1)
 Port Mirroring to monitor the incoming or outgoing traffic on a particular port
 Loop protection to avoid broadcast loops

Quality of Service

8 priority queues on all switch ports

Traffic classification
-
IEEE 802.1p CoS
-
IP TOS / DSCP / IP Precedence
-
IP TCP/UDP port number
-
Typical network application

Strict priority and Weighted Round Robin (WRR) CoS policies

Traffic-policing policies on the switch port

DSCP remarking
Filename: PS-XGSW-28040_V1.0.doc
Page 4 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL

Multicast
 Supports IGMP Snooping v1, v2 and v3
 Support MLD Snooping v1 and v2
 Querier mode support
 IGMP Snooping port filtering
 MLD Snooping port filtering
 MVR (Multicast VLAN Registration)

Security
 IEEE 802.1x Port-Based / MAC-Based network access authentication
 Built-in RADIUS client to cooperate with the RADIUS servers
 RADIUS / TACACS+ users access authentication
 IP-Based Access Control List (ACL)
 MAC-Based Access Control List
 Source MAC / IP address binding
 DHCP Snooping to filter untrusted DHCP messages
 Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
 IP Source Guard prevents IP spoofing attacks
 IP address access management to prevent unauthorized intruder

Management
 Switch Management Interfaces
-
Console / Telnet Command Line Interface
-
Web switch management
-
SNMP v1, v2c, and v3 switch management
-
SSH / SSL secure access
 Four RMON groups (history, statistics, alarms and events)
 IPv6 Address / NTP / DNS management
 Built-in Trivial File Transfer Protocol (TFTP) client
 BOOTP and DHCP for IP address assignment
 Firmware upload / download via HTTP / TFTP
 DHCP Relay
 DHCP Option 82
 User Privilege levels control
 NTP (Network Time Protocol)
 Link Layer Discovery Protocol (LLDP) Protocol
 Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
 Reset button for system reboot or reset to factory default
PLANET Smart Discovery Utility for deploy management
Filename: PS-XGSW-28040_V1.0.doc
Page 5 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL
3. PRODUCT SPECIFICATION
3.1 MAIN COMPONENT
Switch ASIC:
VITESSE VSC7434
X1
Giga PHY:
VITESSE VSC8658
X3
10G PHY:
VITESSE VSC8488
X2
CPU:
MIPS 416MHz (integrated with VSC7434)
x1
Flash:
MX25L12835e (128Mb)
x1
DDR RAM:
MT47H64M16HR-25E (64Mbytes / 16Mbits) x 1
AC-DC Open frame 12V / 4.2A max.
X1
power supply
3.2 FUNCTION SPECIFICATION
Product
XGSW-28040
Hardware Specification
Copper Ports
24 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
4 100/1000Base-X SFP interfaces, shared with Port-21 to Port-24
SFP/mini-GBIC Slots
Compatible with 100Base-FX SFP
4 10GBase-SR/LR SFP+ interface (Port-25 to Port-28)
SFP+ Slots
Compatible with 1000Base-SX/LX/BX SFP
Console
1 x RS-232 DB9 serial port (115200, 8, N, 1)
Switch Architecture
Store-and-Forward
Switch Fabric
128Gbps / non-blocking
Throughput
95Mpps@64Bytes
Address Table
16K entries, automatic source address learning and ageing
Share Data Buffer
1392 kilobytes
IEEE 802.3x Pause Frame for Full-Duplex
Flow Control
Back pressure for Half-Duplex
Jumbo Frame
Reset Button
10Kbytes
< 5 sec: System reboot
> 5 sec: Factory Default
Dimension (W x D x H)
440 x 200 x 44.5 mm, 1U high
Weight
2840g
LED
Power, System, FAN 1 & 2 Alert,
1000 Link/Act and 10/100 Link/Act for per Gigabit port,
Filename: PS-XGSW-28040_V1.0.doc
Page 6 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL
10G Link/Act and 1G Link/Act for per 10G port
Power Requirement
100~240V AC, 50/60Hz
Power Consumption
Max 45.3 watts / 154.7BTU
ESD Protection
6KV DC
Layer 2 Function
Basic Management Interfaces
Console, Telnet, Web Browser, SNMP v1, v2c
Secure Management Interfaces
SSH, SSL, SNMP v3
Port disable / enable
Port Configuration
Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Display each port’s speed duplex mode, link status, Flow control status, Auto
Port Status
negotiation status, trunk status
Port Mirroring
TX / RX / Both
Many-to-1 monitor
802.1Q Tagged Based VLAN, up to 256 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
VLAN
MAC-Based VLAN
Protocol-Based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 256 VLAN groups, out of 4094 VLAN IDs
IEEE 802.3ad LACP / Static Trunk
Link Aggregation
Support 14 groups of 8-Port trunk support
Traffic classification based, Strict priority and WRR
8-Level priority for switching
QoS
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP Packet
IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
IGMP Snooping
IGMP Querier mode support
MLD (v1/v2) Snooping, up to 255 multicast Groups
MLD Snooping
MLD Querier mode support
IP-Based ACL / MAC-Based ACL
Access Control List
Up to 256 entries
RFC-1213 MIB-II
SNMP MIBs
IF-MIB
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
Filename: PS-XGSW-28040_V1.0.doc
Page 7 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
RFC-2933 IGMP-STD-MIB
RFC-3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Standards Conformance
Regulation Compliance
FCC Part 15 Class A, CE
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3ae 10Gb/s Ethernet
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1s Multiple spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
Standards Compliance
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2
Environment
Operating
Temperature:
Relative Humidity:
0 ~ 50 Degree C
20 ~ 95% (non-condensing)
Storage
Temperature:
Relative Humidity:
-20 ~ 70 Degree C
20 ~ 95% (non-condensing)
Filename: PS-XGSW-28040_V1.0.doc
Page 8 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL
3.3 PHYSICAL SPECIFICATIONS:
Dimensions:
440 x 200 x 44.5 mm (W x D x H), 1U high
Weight:
2840g
 Front Panel:
 Rear Panel:
 LED definition
System
LED
Color
Function
SYS
Green
Lights to indicate the system is working.
PWR
Green
Lights to indicate that the Switch has power.
Per 10/100/1000Mbps port
LED
Color
1000
Function
Lights to indicate the port is running in 1000Mbps speed and successfully established.
Green
LNK/ACT
Blink: indicate that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running in 10/100Mbps speed and successfully established.
10/100
Orange
LNK/ACT
Blink: indicate that the switch is actively sending or receiving data over that port.
Per 10G SFP+ interfaces
LED
Color
Lights to indicate the port is running in 10Gbps speed and successfully established.
10G
Green
LNK/ACT
Function
Blink: indicate that the switch is actively sending or receiving data over that port.
Filename: PS-XGSW-28040_V1.0.doc
Page 9 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL
Lights to indicate the port is running in 1Gbps speed and successfully established.
1G
Orange
Blink: indicate that the switch is actively sending or receiving data over that port.
LNK/ACT
■ Alert
LED
Color
Function
FAN1 Alert
Green
Lights to indicate that the FAN1 failure
FAN2 Alert
Green
Lights to indicate that the FAN2 failure
3.4 ENVIRONMENTAL SPECIFICATION
Operating:
Temperature:
0 ~ 50 Degree C
Relative Humidity:
5% ~ 95% (non-condensing)
Storage:
Temperature:
-20 ~ 70 Degree C
Relative Humidity:
5% ~ 95% (non-condensing)
3.5 ELECTRICAL SPECIFICATION
Input Voltage:
100 - 240VAC, 50 - 60Hz, Auto-sensing.
Power Consumption
110V: 29.4watts
100.3BTU
(System on):
220V: 29.9watts
102.0BUT
Power Consumption
110V: 45.3watts
154.7BTU
(Ethernet Full Load):
220V: 44.8watts
152.8BTU
3.6 REGULATORY COMPLIANCE
EMI:
EN 55022 CLASS A:2006
EN61000-3-2:2006
EN61000-3-3: 1995+1A:2001+A2:2005
EMS:
EN 55024:1998+A1:2001+A2:2003
IEC 61000-4-2:2001
IEC 61000-4-3:2008
IEC 61000-4-4:2004
IEC 61000-4-5:2005
Filename: PS-XGSW-28040_V1.0.doc
Page 10 of 11
Printed on 8/14/2012
Product Specification of XGSW-28040
CONFIDENTIAL
IEC 61000-4-6:2008
IEC 61000-4-8:2001
IEC 61000-4-11:2004
IEC/EN 60950-1
3.7 REALIABILITY
MTBF > 50,000 hrs @ 25 Degree C
3.8 BASIC PACKAGING

XGSW-28040
X1

User's Manual
X1

Quick Installation Guide
X1

Power Cord
X1

RS232 Cable
X1

SFP Dust Caps
X8

Rubber Fee
X4

Two Rack-mounting brackets with
X2
attachment screws
3.9 PACKING DIMENSION
Dimension:
565 (W) x 305 (D) x 95(H) mm
Weight:
TBD KG (Gross Weight)
5 pcs in one carton
Filename: PS-XGSW-28040_V1.0.doc
Page 11 of 11
Printed on 8/14/2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising