ADAM-6050W
ADAM-6050W
ADAM-6051W
ADAM-6060W
18-ch Wireless LAN-enabled DI/O Module
16-ch Wireless LAN-enabled Isolated I/O
w/Counter Module
6-ch Wireless LAN-enabled Relay Output
Module
Features
 Supports IEEE802.11b wireless LAN
 Embedded web server with built-in web page
 Supports Modbus/TCP & UDP protocols
 Supports event trigger function
Introduction
ADAM-6050W, ADAM-6051W, and ADAM-6060W bring wireless LAN communication to your network. The hardware design of the modules were based on ADAM-6050, 6051, and
6060, but a wireless LAN interface has replaced the RJ-45 Ethernet port. With support for the common IEEE802.11b, these modules can be accessed on your wireless LAN without
any hardwiring. A sensible choice for environments with wiring limitations, or expensive wiring requirements.
Specifications
General








Certifications
Connectors
Dimensions (WxHxD)
Enclosure
LAN
LED Indicators
Mounting
Power Consumption  Power Input
 Watchdog Timer
CE, FCC class A
Plug-in screw terminal block (#14 ~ 28 AWG)
70 x 112 x 25 mm
ABS+PC
IEEE802.11b WLAN
Power, communication, signal, strength
DIN 35 rail, stack, wall
ADAM-6050W, ADAM-6060W: 2 W @ 24 Vdc
ADAM-6051W: 2.5 W @ 24 Vdc
Unregulated 10 ~ 30 VDC
Yes, programmable
 Counter
 Digital Input
Dry Contact:
Wet Contact
Counter Mode: Frequency Mode:
 Digital Output
Protection
 Isolation Voltage
2,000 VRMS
 Power Reversal Protection
Software
 Support Protocol
 Web Server
Modbus/TCP and UDP
Embedded, with web page for configuration
Environment
Communications
 Channels
 Relay Output (Form A) Contact rating: AC: 120 V @ 0.5 A, DC: 30 V @ 1 A
Breakdown voltage: 500 VAC (50/60 Hz)
Relay on time: 7 msec; Relay off time: 3 ms
Total switching time: 10 ms
Insulation resistance: 1 GΩ minimum at 500 VDC
ADAM-6050W: 12 DI, 6 DO
ADAM-6051W: 12 DI/2 DO/2 Counter
ADAM-6060W: 6 DI, 6 Relay
Maximum Count: 4,294,967,285 (32 bit)
Input frequency: 0.3 ~ 4500 Hz max. (frequency mode)
4500 Hz max. (counter mode)
Modes: Counter, Frequency
Logic level 0: Close to GND
Logic level 1: Open (Status inversable by utility)
(ADAM-6050W and ADAM-6051W only)
Logic level 0: +3 V (max.)
Logic level 1: +10 to 30 V
Up to 3 kHz for ADAM-6050W/6060W
Up to 4.5 kHz for ADAM-6051W
Up to 3 kHz for ADAM-6050W/6060W
Up to 4.5 kHz for ADAM-6051W
Open collector to 30 V, 100 mA max. load 300 mW
Pulse output : up to 5 kHz for ADAM-6050W and
ADAM-6051W
Ethernet I/O Modules
 Humidity
5 ~ 95 % RH, non-condensing
 Operating Temperature -10 ~ 60 °C (14 ~ 140 °F)
 Storage Temperature -25 ~ 85 °C (-13 ~ 185 °F)
Ordering Information
 ADAM-6050W
 ADAM-6051W
 ADAM-6060W
18-ch Wireless LAN-enabled DI/O Module
16-ch Wireless LAN-enabled Isolated I/O w/Counter
Module
6-ch Wireless LAN-enabled Relay Output Module
ADAM-6050W
ADAM-6051W
ADAM-6060W
Feature Details
Home/Building Applications
Communication
ADAM-6050W, ADAM-6051W and ADAM-6060W support IEEE802.11b, so they can
connect to most wireless LAN access points.
Like other ADAM-6000 modules, ADAM-6050W, ADAM-6051W and ADAM-6060W
also support the Modbus/TCP and UDP protocols. You can use HMI/SCADA software to
communicate with the modules through Modbus/TCP. The pre-built UDP protocol supports
event trigger and data streaming functions for critical and real time responses.
Embedded Web Server with Built-in Web Page
The modules have an embedded web server with a built-in webpage that can be configured
by an utility for: Tag Name, Status Label (for example, Start/Stop, Run/Stop, Enable/Disable
and Alarm/Normal), and Channel Enable.
Although it is based on Java technology, there is no need to learn how to write Java applets
to design a customized web page. By using ADAM-6000 utility software, the webpage
can be customized to exact requirements.
Port Crane Monitoring & Control
Applications
Online Download www.advantech.com/products
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising