5502A DLCPCC Cutsheet

5502A DLCPCC Cutsheet
Photocell Controller
DAYLIGHTING CONTROLS
PROJECT INFORMATION
TITLE
24
COMPLIANCE
Project Name
DAYLIGHT
HARVESTING
Catalog No.Date
Hubbell Controls' DLCPCC is the ideal system for providing indoor, outdoor,
or skylight control of lighting circuits based on daylight. The DLCPCC lighting
controller automatically switches a dry contact in response to changes in natural
light levels. The DLCPCC provides a maintained single pole, double throw “Form
C” relay output to drive electrically-held contactors or relays, or inputs to Building
Automation Systems. The low voltage controller requires a remotely mounted
photoconductive (PC) sensor (sold separately).
DLCPCC
The DLCPCC continuously compares the remote sensor’s signal against the LOW
and HIGH light level set points. When the sensor detects decreasing light levels
that corresponds with the LOW set point, the lights are switched ON. Conversely,
as light levels increase and the sensor’s signal matches the HIGH set point,
the lights are switched OFF. The LOW and HIGH set points are separated by a
“deadband.” This prevents the DLCPCC from switching light levels between set
points, thus eliminating nuisance or intermittent changes.
PRODUCT FEATURES
• Adjustable on/off set points
•
•
•
•
•
•
Dual power unit input: 24VAC or 24VDC
Flexible control options
Input time delay
Two set points available for separate on and off levels
Five-year limited warranty
Low voltage device: 24 Vdc
4.75”
1.5”
2.5”
General Specifications
Accuracy
+/- 1 percent at 70°F (21°C) Derated +/- 5 percent above 120°F or below 0°F (49°F / -18°C)
Sensor Type
CD S Photoconductive 2 wire
Power Requirements
24VAC or 24VDC standard
Dead Band
Adjustable: 5-95%
Indicators
Red High and Low LEDs
Input Delay
Standard 30-second sensor (removable for adjustment)
Control Inputs
Photoconductive Sensor Calibration / Simulator (for optional DLCSIMM)
Output
Standard form C SPDT relay 10A resistive
Operating environment
Operating Temp: -13°F to 140°F (-11°C to 60°C)
Indoor use only
Construction
Sensor is mounted on a wall switch faceplate
Dimensions
4.75” height x 2.5” width x 1.5”depth
ColorWhite
Warranty
Five-year limited
Ordering Information
DLCPCC
MODEL
DLCPCC
Photocell Controller
9601 Dessau Road | Building One | Austin, Texas 78754 | 512-450-1100 | 512-450-1215 fax | www.hubbell-automation.com
5502A 1.13.2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising