IMS-4214 Cut Sheet
WIREL
ES
SO
IMS Accessories
N
S
IMS
SENSAPHONE
Monitoring Sensor
LUTIO
Wireless 4–20mA Sensor
Description
The IMS-4214 Wireless 4-20mA sensor provides remote monitoring
of 4-20mA transducers without running wires. The 4-20mA signal is
sent from the sensor to the IMS-4200 Wireless Node via an integrated
2.4GHz wireless radio. An internal 24V DC supply is built–in to power
the current loop. The device can transmit its signal up to 250’ indoors
and even greater distances when it has line-of-site. The IMS series of
wireless sensors also feature mesh networking technology, which allows
each sensor to be used as either a wireless sensor/router or as a lowpower battery operated sensor (also referred to as an end device). When
used as a router, greater distances can be realized because each sensor/
router adds another 250’ of range to the system. The sensor comes with
3 AA alkaline batteries which will power the sensor when main power
fails. A plug-in power supply is included.
Specifications
Operating Temperature Range:
32° to 95°F
Operating Humidity Range:
5–90% RH
(1) 4-20mA sensor
Input Load:
260 Ohms
(1) 5V DC wall plug–in power
adapter
Loop Current:
20mA max
Package Contents
(3) AA alkaline batteries
(2) Plastic drywall anchors
(2) #6 Metal tapping screws
Accuracy:
1%
Loop Power:
24V DC 30mA max
Power Requirements:
(3) AA Batteries and 5VDC
(300mA) plug in adapter
Wireless Technology:
ISM 2.4GHz, 100 mW (20dBm)
Housing:
White plastic
Size:
6.8” x 3.5” x 1.5”
Compatibility:
IMS-4000 Wireless Node
*Specifications subject to change without notice
IMS Wireless 4-20mA Sensor . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4214
Sensaphone • 901 Tryens Road • Aston, PA 19014 • 610–558–2700 • www.sensaphone.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising