Product Data: 396VP, 396RVP, 398VP, 398RVP TUpH pH Sensors

Product Data: 396VP, 396RVP, 398VP, 398RVP TUpH pH Sensors
Product Data Sheet
PDS 71-TUpHVP/rev.G
October 2010
Models 396VP, 396RVP, 398VP, & 398RVP
Retraction/Submersion/Insertion
pH/ORP Sensors
• SMART enabled
1
• SILCORE™ TECHNOLOGY PROVIDES INCREASED
SENSOR LIFE when used in elevated temperature
applications.
• QUICK CABLE-TO-SENSOR RELEASE, provided by
the watertight VP connector, eliminates cable twisting.
MODEL 396VP & 398VP
Insertion/Submersion Sensors
• MINIMUM SENSOR MAINTENANCE due to TUpH
reference technology which ensures steady pH signal
when sensor is coated.
• MAXIMUM SENSOR LIFE because of secondary helical
reference pathway which hinders reference poisoning.
1
• FIELD PROVEN ACCUGLASS™ pH glass formulations
minimize glass cracking, resulting in enhanced
performance and increased life.
MODEL 396RVP
& 398RVP
Ball Valve
Retractable Sensors
• SUPERIOR CHEMICAL RESISTANCE through
choice of sensor construction materials to battle many
aggressive elements.
FEATURES AND
APPLICATIONS
The TUpH pH/ORP sensor line is
now offered with SMART capabilities. SMART
option becomes enabled when used with the Model
1056, 1057 Analyzer and on the Model 6081P wireless
transmitter. The pH-loop capabilities include autorecognition of the SMART sensor, automatic upload of
calibration data and associated time stamp, historical
recording of pH diagnostics (slope, offset, reference
impedance, glass impedance). This trending data
allows technicians to predict frequency of maintenance
and estimate sensor life for a particular process condition. Additional SMART features include factory calibration, resetting SMART sensor calibration data with
1 SILCORE, ACCUGLASS and TUpH are trademarks of Rosemount Analytical.
2 Tefzel and Viton are registered trademarks of DuPont Performance Elastomers.
user menus without power cycling and manufacturing
information.
The TUpH large area reference junction for minimum maintenance requirements: The reference
junction provides an electrical connection between the
reference electrode and the sample, and helps maintain a stable reference potential, regardless of the
change in sample pH. The TUpH reference electrode
junction, the entire plastic tip surrounding the glass
pH electrode, maintains a steady reference signal
even in the dirtiest of applications because it resists
plugging (a common cause of pH signal drift). This
large reference junction area is made of micron sized
reference pathways used for ionic exchange so it
resists plugging by large particles and will continue to
send a steady pH signal, even in the dirtiest of applications. The TUpH reference junction technology has
been field-proven for minimum maintenance requirements.
The TUpH helical reference pathway stops reference poisoning. Ions diffuse through the reference
pathways and a charge is passed to the reference
element. The reference element must be protected
from contamination by poisoning ions such as sulfide,
mercury, cyanide, and ammonia or else the pH signal
will drift. The TupH sensor's long internal helical reference pathway hinders and slows down the rate of
contaminant's migrating to the reference element
therefore providing for a longer sensor life.
The entire line of TUpH model sensors now incorporate the new SILCORE technology contaminant
barrier. This triple-seal barrier prevents moisture and
material impurities from migrating to the pH sensor’s
reference electrode’s metal lead wire. By preventing
these contaminant's from compromising the integrity
of the pH measurement, sensor life is increased,
especially at higher temperatures where increased
migrations occur. In addition, the SILCORE technology provides added protection against sensor failure
due to vibrations and shock by transferring damaging
energy away from the glass-to-metal seal.
The AccuGlass pH glass formulations exceed
industry standards. The AccuGlass pH glass is a
result of many years of glass research resulting in a
formulation which has been found to increase the life
of the sensor. Unlike other pH glasses presently on
the market, this glass resists cracking especially at
higher temperatures and reduces sodium ion error
commonly found in high pH applications. Overall, the
AccuGlass formulation enhances the sensor perform-
ance to measure pH more accurately and have a
longer sensor life than ever before.
The TUpH reference junction and helical
pathway combined with the AccuGlass pH glass
performs exceptionally well in dirty, high solid applications and requires only minimum maintenance. This is
the toughest pH sensor on the market and is still
unmatched by all other pH sensors. The constant
increase in demand for the TUpH sensor proves it's
success as the best process industry pH sensor.
All TupH sensor models have been specifically
designed for improved life in harsh, dirty, and abrasive
applications such as lime slurry, waste treatment,
paper machine headbox, and pigment/dye applications, where large quantities of suspended solids are
present. Various sensor materials, depending on the
sensor model, is available for a variety of different
application needs.
A choice of flat or hemi glass pH glass electrodes
is available on all sensor models to best meet various
application needs. Flat glass is advantageous in abrasive or coating applications that etch or build up on
glass, respectively. In coating applications, such as
slurries, the flat surface allows the process flow to act
as a scrubbing agent to reduce coating and maintenance. In abrasive applications pitting from silicates
and other similar materials is minimized by the flat
glass surface to provide longer sensor life. Flat glass
sensors are offered with a flat tip which is flush with
the flat glass (Models 396VP and 398VP; see example below) or a slotted tip for added protection to the
ball valve retractable flat glass (Models 396RVP and
398RVP; see example below). The hemi bulb glass
is ideal for general purpose use and for those
processes requiring greater accuracy over the entire
Cross Section Diagram of the TUpH Reference Technology
All TUpH sensors are designed with a large area reference junction, helical reference pathway, and an AccuGlass pH
glass bulb. This sensor technology ensures superior performance while only requiring minimal maintenance.
2
PERFORMANCE AND PHYSICAL SPECIFICATIONS
SPECIFICATIONS
MODEL 396VP
MODEL 398VP
MODEL 396RVP
398RVP
Measurements
and Ranges
pH: 0-14
pH: 0-14
ORP: -1500 to 1500 mv
pH: 0-14
ORP: -1500 to 1500 mv
pH: 0-14
ORP: -1500 to 1500 mv
Available pH
ACCUGLASSTypes
GPHT hemi bulb or
GPLR flat bulb
GPHT hemi bulb or
GPLR flat bulb
GPLR hemi bulb or
GPLR flat bulb
GPHT hemi bulb or
GPLR flat bulb
Wetted Materials
316 SST, Polypropylene,
EPDM, glass
Process Connection
None, use 1 in. NPT
process connector,
PN 23166-00 or 23166-01
(sold separately)
None, use 1 in. NPT
process connector,
PN 23166-00 or 23166-01
(sold separately)
None, use 1-in. process
connector or ball valve kit
(1-1/2 in. or 1-1/4 in.)
(sold separately)
None, use 1-in. process
connector or ball valve kit
(1-1/2 in. or 1-1/4 in.)
(sold separately)
Temperature Range
0-100°C (32-212°F)
0-100°C (32-212°F)
0-100°C (32-212°F)
0-100°C (32-212°F)
Pressure RangeHemi bulb
100-1136 kPa (abs)
(0-150 psig)
100-1825 kPa (abs)
(0-250 psig)
100-1136 kPa (abs)
(0-150 psig)
100-1825 kPa (abs)
(0-250 psig)
Pressure RangeFlat bulb
100-790 kPa (abs)
(0-100 psig)
100-790 kPa (abs)
(0-100 psig)
100-790 kPa (abs)
(0-100 psig)
100-790 kPa (abs)
(0-100 psig)
Maximum Pressure at
Retraction or Insertion
Not Applicable
Not Applicable
Code 21: 542 kPa (abs)
(64 psig)
Code 25: 343 kPa (abs)
(35 psig)
Code 21: 542 kPa (abs)
(64 psig)
Code 25: 343 kPa (abs)
(35 psig)
Minimum Conductivity
100 µS/cm, nominal
100 µS/cm, nominal
100 µS/cm, nominal
100 µS/cm, nominal
Preamplifier Options
Integral SMART
Remote
Integral SMART
Integral SMART
No
No
Yes
No
0.45 kg/0.9 kg (1 lb/2 lb)
Sensor: Code 21: 0.9 kg/
1.40 kg (2.0 lb/3.0 lb)
Sensor: Code 21: 0.9 kg/
1.40 kg (2.0 lb/3.0 lb)
Code 25: 1.40 kg/1.80 kg
(3.0 lb/4.0 lb)
Code 25: 1.40 kg/1.80 kg
(3.0 lb/4.0 lb)
Ball Valve Kits:
2.25 kg/3.20 kg
(5.0 lb/7.0 lb)
Ball Valve Kits:
2.25 kg/3.20 kg
(5.0 lb/7.0 lb)
Solution Ground
Titanium, Tefzel, glass,
Titanium, Polypropylene,
choice of Kalrez, Viton, or
EPDM, glass
EPDM (platinum: ORP only)
(platinum: ORP only)
Weight/Shipping Weight 0.45 kg/0.9 kg (1 lb/2 lb)
Titanium, Tefzel, glass,
choice of Kalrez, Viton, or
EPDM (platinum: ORP only)
PERCENT LINEARITY
396VP, 398VP, 398RVP
396RVP
396VP, 398VP, 396RVP, 398RVP
pH Range
GPHT Hemi
GPLR Hemi
GPLR Flat
0-2 pH
94%
94%
93%
2-12 pH
99%
99%
98%
12-13 pH
97%
97%
95%
13-14 pH
92%
92%
—
3
pH range. All hemi bulb sensors are offered with a
standard slotted tip which partially surrounds the glass
bulb for protection against solids and yet allows the
process to flow by the glass electrode for accurate
and reliable pH measurement. Both pH glass bulbs —
the standard hemi or optional flat pH glass — are
exceptional for increased resistance to high temperature and other effects of aging for longer life.
Examples of both sensing tip offerings
Standard Slotted Tip
available on all hemi bulb
sensors and retractable
flat bulb sensors
Optional Flat Tip available with flat glass bulb
insertion/submersion
sensor models
SMART: a preamplifier converts the high impedance
pH signal into a stable, noise-free signal and also
enables SMART capabilities if used with a SMART
enabled 1056, 1057 or 6081 Analyzer. Sensor models
396VP, 396RVP and 398RVP with option (-70) have
SMART Preamplifiers. It is the standard option.
Sensor model 398VP does not have a SMART preamplifier option.
A watertight sensor-to-cable connector eliminates re-wiring and cable twisting when replacing
sensors. The Variopol VP8 connector is an integral
part of each sensor model and uses a mating VP8
cable; see example below. Once the cable is installed
and wired to the analyzer, sensors are easily replaced
without replacing the cable, and, if the replacement
sensor is the same as its predecessor, without
rewiring the analyzer. Also the cable can be disconnected from the sensor before removal from the
process which eliminates cable twisting. Note: switching
between diagnostic and non-diagnostic sensors may
require changes to the VP6 wiring at the instrument.
VP8 wiring is standard to all TUpH models. VP8 wiring
jumpers solution ground and reference impedance.
Diagnostic wiring differs from VP8 standard wiring.
Variopol connector shown
with mating variopol cable
receptacle
VP8 Cable, instrument end
4
A choice of sensor wetted materials is available
for maximum chemical resistance. Check sensor
model specifications on page 4 or ordering matrices
on pages 8 and 10 for various wetted materials.
Models 396VP and 398VP insertion/submersion
sensors are housed in a short metal sensor tube and
use a one inch compression fitting for process connection. The sensors are sealed from the process by
an elastomer o-ring of EPDM, Viton, or Kalrez
depending on sensor model. The simplified construction, designed with the user convenience in mind,
does not require electrolyte replenishment or any
component replacement.
Model 396VP and 398VP
Models 396RVP and 398RVP ball valve retractable
sensors are housed in a 21 or 36 inch titanium
sensor tube and is sealed from the process by an
elastomer o-ring of EPDM, Viton, or Kalrez, depending
on sensor model, for maximum chemical resistance.
These two models were specifically designed for
applications where a separate sample stream is
difficult to provide and greater insertion depths are
required. Both can be used with a 1-¼ in. or 1-½ in.
ball valve for hot tap installations.
Model 396RVP features a titanium solution ground
for advanced sensor diagnostics when used with
the Models 54, 81, 3081, 4081, 5081, 1056, Xmt
and wireless 6081P pH/ORP analyzers/transmitters.
Advanced sensor diagnostics aid preventative
maintenance by notifying the operator of the need for
replacing or cleaning an aged or fouled sensor, thus
allowing continuous optimum performance.
Model 396RVP and 398RVP, shown in an optional
ball valve kit
VP8 Cable, sensor end
INCH
MILLIMETER
DIMENSIONAL DRAWINGS: Model 396VP and 398VP Shown with Process Connector
PN: 24281-00
Metal Process Connector PN 23166-xx (xx = 00 for
316 SST and xx = 01 for titanium) can be used for
insertion or submersion mounting of Models 396VP
or 398VP sensors in 1-inch fittings.
The metal process connector gives the sensor various insertions depths, depending on where the user
locates the compression fitting. Also the threads can
be switched to face the cable end of the sensor for
connection to submersion pipes.
Typical Flow Thru and Insertion Mounting Configurations for Models 396VP and 398VP
5
The Pipe Mounting Union (PN 9330022) is
ideal for connecting a sensor to a pipe, tank,
aeration basin, or open channel.
MILLIMETER
INCH
The Sensor Handrail Mounting Assembly (PN
11275-01) can be used to insert the sensor into
tanks and ponds, and mounts easily on most
handrails.
INCH
MILLIMETER
The Nylon Process Connector has process threads that
can be used for submersion pipe or in-line tee mounting.
Typical Submersion Installations for Models 396VP and 398VP
6
INCH
MILLIMETER
DIMENSIONAL DRAWINGS: Model 396RVP and 398RVP
with Optional 1-1/2 inch Ball Valve PN 23240-00
Ball Valve Kit (PN 23240-00) used
with Model 396RVP and 398RVP
retractable sensors
A process connector (PN 23166-00 or
-01) must be used to connect the sensor
to Ball Valve Kit 23240-00. Process
connector can be purchased separately.
INCH
MILLIMETER
DIMENSIONAL DRAWINGS: Model 396RVP and 398RVP
with Optional 1-1/4 inch Ball Valve PN 23765-00
7
ORDERING
INFORMATION - MODEL 396VP & 398VP
The Models 396VP and 398VP insertion/submersion sensors feature a gel-filled electrolyte solution with the
large area, coating resistant TUpH reference junction in a choice of polypropylene (Model 396VP) or Tefzel
(Model 398VP) materials and a standard hemi or optional flat glass bulb. Both models are housed in a metal
sensor tube, 316 SST for Model 396VP or Titanium for Model 398VP, and can be mounted in insertion, submersion, or flow through installations using a 1 in. MNPT threaded process connector (ordered separately). Both
models are offered with the watertight Variopol sensor-to-cable connector and use the mating connector cable
(ordered separately). VP8 cable assembly works with both VP8 and VP6 sensor connector. Also available is a
choice of temperature element 3 K Balco or Pt 100 RTD. Model 396VP is SMART enabled. Option (-70) is the
standard option. Model 398VP does not have SMART option. A remote preamplifier found in the analyzer/transmitter or in a junction box (ordered separately) must be used with 398VP sensors for reliable signal transmission.
VP8 cable is required for SMART communication.
MODEL
396VP
TUpH INSERTION/SUBMERSION STAINLESS STEEL AND POLYPROPYLENE pH SENSOR (GPHT hemi bulb)
Code
50
54
ANALYZER/TC COMPATIBILITY (Required Selection)
For use with Models 1181, 1050, 1003 (3 K TC)
PT100 For use with all Models not listed above
Code
71
OPTIONAL OPTIONS
GPLR Flat bulb
396VP
54
- 71
EXAMPLE
MODEL
398VP
TUpH INSERTION/SUBMERSION TITANIUM AND TEFZEL pH/ORP SENSOR
Code
10
13
13
MEASURING ELECTRODE TYPE (Required Selection)
GPHT hemi glass, General Purpose High Temperature (0-14 pH)
ORP
Flat
Code
30
31
32
O-RING MATERIAL (Required Selection)
EDPM
Viton
Kalrez (recommended for applications with Chlorine Dioxide)
Code
50
54
ANALYZER/TC COMPATIBILITY (Required Selection)
For Models 1181 (3K TC) [no T.C. if ordered with option -12 (ORP)]
PT100 For use with all Models not listed above
398VP
8
-
-
10
-
32
-
54
EXAMPLE
ORDERING
INFORMATION
FOR FIRST TIME 396VP AND 398VP INSTALLATIONS, ROSEMOUNT ANALYTICAL RECOMMENDS USING THE FOLLOWING GUIDE:
1. Variopol Cable (required for all first time installations)
PN 24284-00, 15 ft cable with mating VP8, (9 various lengths are available, see accessories)
2. Process Connector Accessories (required for all first time installations)
Choose one: PN 23166-00, 316 SST, 1 in. x 1 in. NPT process connector (see page xx)
PN 23166-01, Titanium, 1 in. x 1 in. NPT process connector (see page xx)
PN 9510066, Nylon, 1 in. x 1 in. NPT process connector (see page xx)
Choose one (optional process connector o-rings):
PN 9550220, Kalrez o-ring, 2-214
PN 9550099, Viton o-ring, 2-214
3. Mounting Accessories (optional)
Choose one: PN 2002011 CPVC flow through tee, 1 in. NPT process connection (see page xx)
PN 11275-01 PVC handrail mounting assembly, 1 in. NPT process connection (see page xx)
PN 915240-05 CPVC pipe mount union, 1 in. FNPT process connection (see page xx)
4. Remote Junction Boxes (optional)
Choose one: PN 23555-00 includes preamplifier for Models 54, 81, 3081, 4081
PN 23309-03 and PN 22698-02 plug-in preamplifier for Model 1181Analyzer
PN 23309-04 and PN 22698-03 plug-in preamplifier for Models 1054 series, 2054, 2081 Analyzers
PN 23054-03 includes preamplifier for Solu Cube Model 2700
5. Extension cables (used with remote junction boxes)
Choose one: PN 23646-01, 11 conductor, shielded, prepped
PN 9200273, 11 conductor, shielded, unprepped
* Used for connections to Models 1181, 1054, 2081, 54, 81, 3081, 4081, 5081, Xmt, 1055 and remote junction box PN 23555-00.
WHAT’S THE DIFFERENCE BETWEEN THESE TWO MODELS?
Both Model 396VP and 398VP are excellent for use in dirty, harsh applications where large quantities of suspended solids are found. The differences between the two models are listed in the table below.
Model
Sensor Tube
Material
TUpH Reference
Junction Material
SMART
enabled
Choice of
Typical Applications
O-ring Material?
396VP
316 SST
Polypropylene
Yes
No
Lime slurry, waste treatment, paper
machine head box, and pigment/dye
processes
398VP
Titanium
Tefzel
No
Yes
Chemically challenging applications,
such as chlorine dioxide found in
pulp bleaching towers, sour water
strip pers, and other process
streams containing a variety of
organic solvents.
9
ORDERING
INFORMATION - MODEL 396RVP & 398RVP
The Models 396RVP and 398RVP ball valve retractable sensors feature a gel-filled electrolyte solution with the
large area, coating resistant TUpH reference junction in a choice of polypropylene (Model 396RVP) or Tefzel
(Model 398RVP) materials and a standard hemi or optional flat glass bulb. Both models are housed in a Titanium
sensor tube and can be mounted directly into the process using a 1 in. MNPT threaded process connector and a
ball valve assembly kit (both ordered separately). Both models are offered with the watertight Variopol sensor-tocable connector and use the mating connector cable (ordered separately). VP8 cable assembly works with VP6
and VP8 sensor connector. Both models are SMART enabled. Option (-70) is the standard preamplifier option.
Also available is a choice of temperature element, 3 K Balco or Pt 100 RTD. VP8 cable is required for SMART
communication.
MODEL
396RVP
TUpH RETRACTABLE POLYPROPYLENE pH/ORP SENSOR
Code
10
13
13
MEASURING ELECTRODE TYPE (Required Selection)
Hemi bulb, General Purpose Low Resistivity (0-14 pH)
ORP
Flat, GPLR glass
Code
21
25
SENSOR LENGTH (Required Selection)
21 in. Titanium Tube
36 in. Titanium Tube
Code
50
54
ANALYZER/TC COMPATIBILITY (Required Selection)
For Models 1181 (3K TC)
PT100 For use with all Models not listed above
396RVP
10
-
21
-
54
EXAMPLE
MODEL
398RVP
TUpH RETRACTABLE TEFZEL pH/ORP SENSOR
Code
10
13
13
MEASURING ELECTRODE TYPE (Required Selection)
GPHT hemi glass, General Purpose High Temperature (0-14 pH)
ORP
Flat, GPLR glass
Code
21
25
SENSOR LENGTH (Required Selection)
21 in. Titanium Tube
36 in. Titanium Tube
Code
30
31
32
O-RING MATERIAL (Required Selection)
EDPM
Viton
Kalrez (recommended for applications with Chlorine Dioxide)
Code
50
54
ANALYZER/TC COMPATIBILITY (Required Selection)
For Models 1181 (3K TC) [no T.C. if ordered with option -12 (ORP)]
PT100 For use with all Models not listed above
Code
70
OPTIONAL OPTIONS (preamplifier)
Integral SMART preamplifier (operating temperature up to 100°C)
398RVP -
10
-
10
-
21
-
32
-
54
EXAMPLE
ORDERING
INFORMATION
FOR FIRST TIME 396RVP AND 398RVP INSTALLATIONS, ROSEMOUNT ANALYTICAL RECOMMENDS USING THE FOLLOWING GUIDE:
1. Variopol Cable (required for all first time installations)
PN 24284-00, 15 ft cable with mating VP8, (9 various lengths are available, see accessories)
2. Retractable Mounting
1A. Choose one (required for all first time installations, except as noted):
PN 23166-00 1 in. x 1 in. NPT process connector, 316 SST
PN 23166-01 1 in. x 1 in. NPT process connector, Titanium
Choose one (optional process connector o-rings):
PN 9550220, Kalrez o-ring, 2-214
PN 9550099, Viton o-ring, 2-214
1B. Choose one:
PN 23240-00 1-1/2 in. ball valve assembly, 316 SST
PN 23765-00 1-1/4 in. ball valve assembly, 316 SST (process connector not needed)
3. Remote Junction Boxes (Optional)
Choose one: PN 23555-00 includes preamplifier for Models 54, 81, 3081, 4081
PN 23309-03 and PN 22698-02 plug-in preamplifier for Model 1181Analyzer
PN 23309-04 and PN 22698-03 plug-in preamplifier for Models 1054 series, 2054, 2081 Analyzers
PN 23054-03 includes preamplifier for Solu Cube Model 2700
4. Extension cables
Choose one: PN 23646-01, 11 conductor, shielded, prepped
PN 9200273, 11 conductor, shielded, unprepped
* Used for connections to Models 1181, 1054, 2081, 54, 81, 3081, 4081, 5081, Xmt, 1055, and remote junction box PN 23555-00.
TYPICAL MOUNTING CONFIGURATIONS FOR MODELS 396RVP AND 398RVP
11
ACCESSORIES
PART NUMBER
24281-00
24281-01
24281-02
24281-03
24281-04
24281-05
24281-06
24281-07
24281-08
22698-00
22698-02
22698-03
22743-01
22744-01
23557-00
33046-00
9310096
9210012
9210013
9210014
R508-160Z
9550167
12707-00
DESCRIPTION
15 ft. VP8 cable
25 ft. VP8 cable
2.5 ft. VP8 cable
50 ft. VP8 cable
100 ft. VP8 cable
4 ft. VP8 cable
10 ft. VP8 cable
20 ft. VP8 cable
30 ft. VP8 cable
Preamplifier plug-in for junction box, for Model 1003
Preamplifier plug-in for junction box, for Models 1181, 1050
Preamplifier plug-in for junction box, for Models 1054A/B, 2054, 2081
Pt100 preamplifier for Model 1181
3K Preamplifier for Model 1181
Preamplifier for junction box for Models 54, 3081, 81, 4081
Ferrule, 1 in., split 316SS
Nut, swage, 1 in. 316SST
Buffer solution, 4.01 pH, 16 oz
Buffer solution, 6.86 pH, 16 oz
Buffer solution, 9.18 pH, 16oz
ORP solution, 460 mv ± 10 at 20°C
EPDM O-ring for Process Connector (PN 23166-00 or 23166-01)
Jet Spray Cleaner
NOTE: All accessories above can be used with the Models 396VP, 396RVP, 398VP and 398RVP.
1
Kynar is a registered trademark of Elf Atochem North American, Inc.
2
Teflon is a registered trademark of E.I. du Pont de Nemours and Company.
The right people,
the right answers,
right now.
ON-LINE ORDERING NOW AVAILABLE ON OUR WEB SITE
http://www.raihome.com
Specifications subject to change without notice.
8
Credit Cards for U.S. Purchases Only.
Emerson Process Management
2400 Barranca Parkway
Irvine, CA 92606 USA
Tel: (949) 757-8500
Fax: (949) 474-7250
http://www.raihome.com
© Rosemount Analytical Inc. 2010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising