RS-220 Spec Sheet
RS220
THREE-WAY ELECTRONICALLY CONTROLLED
LOUDSPEAKER SYSTEM
APPLICATIONS:
• Concerts
• Performing Arts
• Club
• Voice Announcement
• Houses of Worship
• Sports Facilities
FEATURES:
• Arrayable design
• High output, low distortion sound quality
• PowerSense™ dynamic driver protection
• High power capacity
• High sensitivity
DESCRIPTION
TM
The RS220 is a high output, high-sensitivity, hornloaded, three-way, full-range loudspeaker system of
wavefront-coherent design. The low frequency section of
the RS220 utilizes two 8" triple-spider, Ferrofluid-cooled low
frequency drivers on a dual-throated exponential bass horn.
The midrange section of the RS220 consists of an M200TM
2" exit compression driver mounted on a midrange Pattern
Control horn. The low and mid-frequency horns of the RS220
loudspeaker system are molded in one piece and comprise
the fiberglass faceplate of the trapezoidal cabinet. The
RS220’s high frequency section, which is mounted co-axially
to the upper LF driver, utilizes a single VHF100 (patent
pending) 1" compression driver coupled to a high density,
urethane foam high frequency Pattern Control horn.
The RS220 system is engineered with a unique passive
three-way frequency dividing network which provides
optimal filtering and slope characteristics throughout the
system’s bandpass. PowerSense Dynamic Driver Protection
circuitry provides continuous monitoring of the power level
into the loudspeaker system. The RS220’s passive crossover
design enables exceptional performance with the economy
of single amplifier channel operation.
The electronic system controller acts as an electronic
crossover to an optional VBS subwoofer. It monitors both
the RS220 system and the subwoofer through sense lines
from the power amplifier outputs, providing both dynamic
speaker protection and dynamic equalization to the system.
The RS220 enclosure is made of extensively braced,
black-painted 13-ply void free Baltic birch plywood. Integral
steel edging connected to internal steel bracing allows
suspension of the RS system. Consult the Community
publication, “Rigging Information for Flying Systems of
Community RS and VBS Loudspeakers” for further
information.
SPECIFICATIONS
Type:
Three-way Electronically Controlled
Loudspeaker System
Frequency Response: 85 Hz to 18 kHz
Power Handling:
200W RMS, Continuous Pink Noise
500W Program
Sensitivity (1 Watt / 1 Meter):
106.9 dB SPL (500 Hz to 18 kHz)
102.2 dB SPL (85 Hz to 18 kHz)
Nominal Dispersion: 65º Horizontal, 50º Vertical
Nominal Impedance: 8 ohms
Crossover Frequency(s): 800 Hz, 3 kHz
Components:
Two Ferrofluid-cooled 8" LF Drivers
One 2" exit M200 MF Driver
One 1" exit VHF100 HF Driver
Speaker Protection: PowerSense DDP
Input Connectors:
2 Neutrik Speakon
1 dual banana
Enclosure Material and Finish:
13-ply void free black painted Baltic birch plywood
Fiberglass exterior optional.
Trapezoid Pitch: 22.5º
Dimensions:
Height: 26.125 inches(663.58 mm)
Width: 14.25 inches (361.95 mm)
Depth: 14.25 inches (361.95 mm)
Weight:
60 lbs.
(27.1 kg.)
Shipping Weight: 77.1 lbs. (35 kg.)
RS220 Page 1 of 2
C O M M U N I T Y
P R O F E S S I O N A L
L O U D S P E A K E R S
333 East Fifth Street Chester, PA 19013-4511 USA Phone (610) 876-3400 Fax (610) 874-0190
© 1995, Community Light & Sound, Inc.
RS220
THREE-WAY ELECTRONICALLY CONTROLLED
LOUDSPEAKER SYSTEM
FREQUENCY RESPONSE
IMPEDANCE
DIMENSIONS
ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The loudspeaker system shall be a horn-loaded, three-way, bass reflex design with two 8" Ferrofluid-cooled woofers coupled
to a dual-throated exponential horn, one 2" exit M200 midrange driver with a voice coil diameter of 2.15" coupled to a Pattern
Control horn and one 1" exit VHF100 (patent pending) high frequency driver coupled to a Pattern Control horn. The low and
mid frequency horns shall be constructed in one piece of black fiberglass and shall comprise the faceplate of the cabinet. The
high frequency horn shall be constructed of black high density urethane foam and shall be mounted coaxially within the low
frequency horn. All components shall be connected to an integral crossover / protector. The crossover / protector shall be a
three-way, 12 dB per octave design with a high pass at 3000 Hz to the high frequency driver, a 3000 Hz to 800 Hz bandpass to
the midrange driver, and a low pass at 800 Hz to the woofers. The crossover shall utilize high quality 250V film capacitors and
high positive current coefficient resistors (HPCCR) for component protection. The loudspeaker enclosure shall have an internal
volume of 1.21 cubic feet (34.26 L) and be constructed of13-ply void free Baltic birch plywood, available in black paint or
hand laminated fiberglass. The system shall have four steel edges with integral suspension points and one steel handle. The
system shall meet the following performance criteria: Amplitude response of 85 Hz to 18 kHz, 200 Watts RMS power handling,
102.2 dB SPL sensitivity at 1 meter with 1 Watt applied. Nominal coverage pattern shall be 65º x 50º (H x V). Dimensions shall
be 26.125 inches (663.58 mm) high, 14.25 inches (361.95 mm) wide, 14.25 inches (361.95 mm) deep, and weigh 60 lbs. (27.1
kg.). The system impedance shall be 8 ohms nominal.
LIMITED WARRANTY
Community RS/VBS loudspeaker systems are guaranteed to be free from defects in materials and workmanship for a period
of five years from the date of sale to the original purchaser. This warranty applies to the product, therefore the remainder of the
warranty period will be automatically transferred to any subsequent owner. This warranty does not apply to products which have
been subjected to abuse, accident, modification, improper handling/installation, or repairs made without factory authorization or
by other than an authorized Community Field Service Station. Items or products covered by this warranty will be repaired or
replaced, at the option of Community, without charge for materials or labor, provided products are returned prepaid for inspection
to the Community factory in Chester, PA or to a Community Authorized Field Service Station.
Specifications subject to change without notice.
RS220 Page 2 of 2
C O M M U N I T Y
P R O F E S S I O N A L
L O U D S P E A K E R S
333 East Fifth Street Chester, PA 19013-4511 USA Phone (610) 876-3400 Fax (610) 874-0190
9509018L
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising