BiPoleCDS
MULTI-OUTPUT HIGH-VOLTAGE MODULES
54
BIPOLAR HIGH POWER C SERIES
Dual-Output High Voltage Power Supply
The Bipolar C Series line of regulated DC-to-DC high-voltage
converters is an extension of the High Power C Series. Bipolar C Series
units contain a pair of + and - standard-product, 60-watt or 125-watt
High Power C Series assemblies, providing a total of 125 watts or 250
watts. By encapsulating a module pair within one case, the cost of
testing, potting, burn-in, and system integration is reduced.
The ± HV output pair is packaged in UltraVolt’s 4.5” x 8” x 1.1” standard
case. This high power density is especially suited to high-energy
pulsers, amplifiers, and discharge devices with large capacitance,
fast repetition rates, or high current loads. See Application Note 10
for more charging information. Typical applications for the Bipolar C
Series include the following: cap-charging, pulsed power, ultrasound,
amplifiers, and pulse generators.
•
•
•
•
•
•
•
•
•
•
•
•
•
7 models from 0 to ±125 Volts through 0 to ±6kV
125 or 250 watts of total output power
Dual, independently controlled outputs
Output current & voltage monitors
High efficiency
PARAMETER
INPUT
Maximum Iout capability down to 0 Volts
Low profile
Fast Trise with very low overshoot
High power to voltage density
>200,000 hour MTBF @65°C
Output short-circuit protection
Fixed-frequency, low-stored-energy design
UL/cUL Recognized Component; CE Mark (LVD & RoHS)
CONDITIONS
UNITS
ALL TYPES
Voltage Range
Full Power
+ 23 to 30
VDC
Voltage Range
Derated Power Range
+ 11 to 32
VDC
Current
Standby / Disable
< 40
mA
Current
Max Load, Max Eout
125W: 3, 250W: 6
A
Current
No Load, Max Eout
1/8C to 1C: < 600, 2C to 6C: < 1000
mA
AC Ripple Current
Nominal Input, Full Load
< 50
mA p-p
OUTPUT
1/8C
1/4C
1/2C
1C
2C
4C
6C
0 to ±125
0 to ±250
0 to ±500
0 to ±1,000
0 to ±2,000
0 to ±4,000
0 to ±6,000
VDC
250
125
250
125
250
125
250
125
250
Watts
250
500
125
250
62
125
31
62
21
42
mA
208
417
114
227
52
104
26
52
17.7
35
mA/V
Voltage Range
Nominal Input
Power
Nominal Input, Max Eout
125
250
125
250
125
Current
Iout, Entire Output Voltage Range
1000
2000
500
1000
Current Scale Factor
Full Load
833
1667
417
833
100:1 ±2% into 10MΩ
< 1.0
Voltage Monitor Scaling
-
Ripple
Full Load, Max Eout, Cload ≥0.5uF
Rise Time
Max Iout, Various C Loads & Eout
Storage Capacitance
Internal
Overshoot
C Load, 0 Eout to Full Eout
Line Regulation
Nom. Input, Max Eout, Full Power
< 0.01%
VDC
Static Load Regulation
No Load to Full Load, Max Eout
< 0.01%
VDC
Stability
30 Min. warmup, per 8 hr/ per day
< 0.01% / < 0.02%
VDC
< 1.0
< 1.0
< 1.0
< 1.0
< 1.0
< 1.0
Figure A
0.90
0.90
< 1V
0.90
0.90
0.43
< 1V
0.43
< 1V
ENVIROMENTAL
0.019
V p-p
-
0.019
0.019
< 1V
0.019
0.013
< 1V
0.013
< 1V
0.013
0.013
< 1V
uF
V pk
ALL TYPES
Input Impedance
Nominal Input
+ Output Models 1.1MΩ to GND, - Output Models 1.1MΩ to +5 Vref
MΩ
Adjust Resistance
Typical Potentiometer Values
10K to 100K (Pot across Vref. & Signal GND, Wiper to Adjust)
Ω
Adjust Logic
0 to +5 for +Out, +5 to 0 for - Out
+4.64 VDC for +Output or +0.36 for -Output = Nominal Eout
-
+ 5.00VDC ± 2%, Zout = 464Ω ± 1%
-
0 to +0.5 Disable, +2.4 to 32 Enable (Default = Enable)
-
Output Voltage & Impedance T=+25°C
Enable/Disable
TEMPERATURE & HUMIDITY
ALL TYPES
Operating
Full Load, Max Eout, Case Temp.
-40 to +65
°C
Coefficient
Over the Specified Temperature
PPM/°C
Thermal Shock
Mil-Std 810, Method 503-4, Proc. II
±50
-40 to +65
Storage
Non-Operating, Case Temp.
-55 to +105
°C
Humidity
All Conditions, Standard Package
0 to 95% non-condensing
-
Altitude
Standard Package, All Conditions
Sea Level through Vacuum (Vacuum may require -P1 or -S1 options, contact factory for details.)
-
Shock
Mil-Std-810, Method 516.5, Proc. IV
20
G’s
Vibration
Mil-Std-810, Method 514.5, Fig.514.5C-3
10
G’s
°C
Specifications subject to change without notice.
Making High Voltage Easier!®
ULTRAVOLT®
Higher Service, Higher Performance, Higher Reliability
©2011, UltraVolt Inc. All rights reserved.
MULTI-OUTPUT HIGH-VOLTAGE MODULES
55
BIPOLAR HIGH POWER C SERIES
Dual-Output High Voltage Power Supply
C = uF
V = Volts
I = mA
T = mS
C = uF
V = kV
I = mA
F = Hz
T= C x V
I
I=CxVxF
C = uF
V = kV
I = mA
F = Hz
F=
I
CxV
C = uF
E² = kV
J = Ws
J= C x E²
2
Figure A - Rise Time Formulas
NOTES: Capacitance must include HVPS internal Capacitance.
STANDARD CASE
CONSTRUCTION
SIZE
Epoxy-filled Aluminum Box
Chem film per MIL-A-8625 Type II (Anodizing)
TOLERANCE
Volume 38.7in³ (634 cc)
Weight 2.45lbs (1.1kg)
+ HVPS CONNECTIONS
- HVPS CONNECTIONS
1 & 8 - Input Power Ground Return
1 & 8 - Input Power Ground Return
3 - Iout Monitor
3 - Iout Monitor
4 - Enable/Disable
4 - Enable/Disable
5 - Signal Ground Return
5 - Signal Ground Return
6 - Remote Adjust Input
6 - Remote Adjust Input
7 - +5 VDC Reference Output
7 - +5 VDC Reference Output
2, 9, & 10 - Positive Power Input
2, 9, & 10 - Positive Power Input
11, 12, & 13 - N/C
11, 12, & 13 - N/C
14 - Eout Monitor
14 - Eout Monitor
15 & 16 - HV Ground Return
15 & 16 - HV Ground Return
17 & 18 - HV Output
17 & 18 - HV Output
All grounds joined internally.
Power supply mounting points
isolated from internal grounds by
>100kW, .01uF / 50V (Max)
All grounds joined internally.
Power supply mounting points
isolated from internal grounds by
>100kW, .01uF / 50V (Max)
Overall ±0.025” (0.64)
Pin to Pin ±0.015” (0.38)
Hole to hole location ±0.025” (0.64)
Downloadable drawings (complete with mounting &
pin information) and 3D models are available online.
ORDERING INFORMATION
Type
Input
Polarity
Power
Heat Sink
PCB Support
0 to 125 VDC Output
0 to 250 VDC Output
0 to 500 VDC Output
0 to 1,000 VDC Output
0 to 2,000 VDC Output
0 to 4,000 VDC Output
0 to 6,000 VDC Output
24VDC Nominal
Negative & Positive Output
125 Watts Output
250 Watts Output
.400” High (sized to fit case)
(7) 0.187" Standoffs on top cover
Rev. M 10/14
Example:
IEC-60950-1
Non-RoHS compliant units are
available. Please contact the
factory for more information.
Manufactured in USA
Making High Voltage Easier!®
ULTRAVOLT®
Type
Voltage
Model
Input
1/8C
1/4C
1/2C
1C
2C
4C
6C
24
-NP
125 (60Wx2)
250 (125Wx2)
-H
-Z11
1/2C24-NP125(60Wx2)
Total Output Power
Polarity
Popular accessories ordered with this product include CONN-KIT-HP,
and BR-7 and BR-8 mounting bracket kits.
1800 Ocean Avenue, Ronkonkoma, NY 11779
Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising