Windhager BioWIN 100 Automatic Boiler Brochure

Windhager BioWIN 100 Automatic Boiler Brochure
windhager.com
A breath of fresh air for pellets
BioWIN
Wood pellet boiler
Output range: 2.9 to 25.9 kW
Cascade options up to 78 kW
1
Wood pellets
A breath of
fresh air
BioWIN
2
Safe heat with convenience
Within a very short time, heating with pellets has become established as a popular and widely used way of
supplying heat. This is no wonder, because pellet heating systems are not only particularly environmentally
friendly, they also offer the highest levels of heating comfort with the latest technology. Windhager is once
again showing how convenient, efficient and environmentally friendly heating with pellets can be: with the
BioWIN.
BioWIN – all the advantages at a glance
UNBEATABLE IN TERMS OF COMFORT
•
Innovative automatic cleaning functions, such as
heating surface cleaning and ash removal, ensure
little maintenance work (BioWIN Exklusiv)
•
Large ash box integrated in the unit (BioWIN
Exklusiv) ensures long emptying intervals (only
1–3 times per heating season)
•
Patented, unique and flexible feed system with up
to 8 removal probes ensures that new supplies of
pellets are provided automatically
UNPARALLELED IN TERMS OF ECONOMY
•
Robust, long-life stainless steel burner ensures
low pellet consumption and high efficiency
•
Particularly low and compact design – enough room
for it even in boiler rooms with a low ceiling
•
Satisfies all emissions-related requirements
RELIABLE AND SAFE
•
Robust, wear- and maintenance-free ignition
element
•
Reliable new supplies of pellets provided by
patented, pneumatic feed system with three
independent removal probes
3
Only 1.75 m tall!
1
3
1
Compact design
The compact design of the BioWIN means it can be installed in the smallest
boiler rooms. If access has to be by narrow and steep steps, the boiler can
even be dismantled into several easily transportable sections in order to
deliver.
The advantages for you
• Can even be installed in boiler rooms with a low ceiling
• Takes up little space in the installation room, requiring
just 0.75 m2 floorspace
• Easy and safe to deliver
2
Fully automatic, patented feed with 1, 3 or up to
8 removal probes provides a long-term assured
pellet supply
3
Fully automated cleaning mechanisms
„Switch on and forget“. Once the BioWIN has been comissioned, the
innovative fully automated systems ensure that you don‘t need to worry
about anything else.
5
7
The advantages for you
• Fully automated burner bowl ash removal
• Fully automated heating surface cleaning ensures a continuously high
degree of efficiency and low fuel consumption (BioWIN Exklusiv)
• Fully automated ash removal for long intervals between maintenance –
must only be emptied 1 to 3 times per year (BioWIN Exklusiv)
4
Large reserve supply container of 150 kg pellets
enables long, uninterrupted burning phases
5
Maintenance-free, long-life ignition element
The operational safety of a pellet boiler is significantly dependent on the
function and stability of an ignition device. The BioWIN ignition element is a
guarantee part, not a wearing part – unique in the market!
The advantages for you
• Guaranteed long service life and functional reliability
• Maintenance-free
• Low maintenance costs
6
4
Precise control of the boiler capacity with
the infinitely variable combustion fan
Cogent to the
smallest detail
1
7
The burner technology has proven itself thousands of
times over and delivers the best combustion results,
even in the lowest performance range.
The advantages for you
• Low pellet consumption and consistently high level
of efficiency
• Small ash quantities and long intervals between
maintenance
• No buffer tank is required
8
2
Modulating stainless steel burner
Long-lasting, heavy-duty thermal probe
for the Thermocontrol combustion control
system
6
8
4
3
7
5
3
5
Comfort when you need it
You can choose between several comfort classes – Exklusiv, Exklusiv-S or Klassik – depending on the level of
comfort and convenience you require. Each of these comfort classes is offered in four performance levels
(10, 15, 21 and 26 kW) and two control versions (REG and MESPLUS). With 24 boiler solutions, the BioWIN is
tailored to meet your individual requirements in all ways.
Exklusiv
Exklusiv-S
Klassik
Maintenance interval*
1 to 3 times in a year
1 to 3 times in a year 1) / ≤ up to 7 days 2)
≤ up to 7 days
Heating surfaces
cleaning
fully automated
fully automated 1)
manual
Ash removal
fully automated
fully automated 1)
none
Pellet feed
fully automated
manual
manual
2)
*The actual maintenance interval depends on the operating method and the pellets used. Please refer to the operating instructions for details
Everything under control
MESPLUS Modular Energy System
The measure of all things: MESPLUS takes on the entire
heat management of the heating system. It controls and
optimises heat production and distribution matched
precisely to requirements. Its modular design ensures
that the heating system can be expanded at any time.
MESPLUS
User Controller
6
MESPLUS
Temperature
Controller
REG standard control unit
The REG standard control units offer a high level of
control and operating convenience for one heating
and one hot water tank circuit. The heating circuit
cannot later be extended, and no further combinations
are possible.
Digital REG
user module
Versatile and flexible
Looking to combine the BioWIN with a solar-heating system? Planning an expansion to your heating system?
No problem. The BioWIN can handle the operation of single or multiple-circuit systems, underfloor heating
and/or radiators. As with all heating solutions from Windhager, the BioWIN is optimally equipped for use
with other systems. So you save both time and money when installing the system.
When it comes to heating, you‘ll find everything under one roof at Windhager. Windhager provides solutions
and components for all fuels and every need. You not only have a single source for all your needs, you have
the security that everything will work together perfectly – and that with the unique function guarantee on
Windhager systems.
MESPLUS
user module(s)
SolarWIN
Pellet and solar – the
perfect combination for
carbon neutral heating
BioWIN
Pellet central heating boiler
System distributor
AccuWIN Solar
Accumulator tank with
Fresh Water Station
LogWIN
Wood gasification boiler
7
The optimal pellet
storage room
The fully automated pellet feed
To replenish the pellets, Windhager offers a fully automated feed system patented throughout Europe that
carefully transports the pellets in an air current.
General advantages of the pellet feed system
 Unequalled flexibility, since the position of the storage room can be independent of the boiler room
 Totally maintenance-free system
 Easy and fast planning as well as installation
 No moving parts and no electrical cables necessary in the storage room
 Careful pellet transport – without stirring up dust – to the boiler
This pneumatic pellet supply system can be easily and flexibly adapted to the local conditions and
requirements. In addition, there are 3 removal variants to choose from:
8 probes with automatic
changeover unit
3 probes with automatic
changeover unit
1 probe with "agitation" for
sheet steel and fabric tanks
Suction probe 1–8
Automatic
changeover unit
8
Automatic changeover unit
Suction probe
1–3
Additional advantages of 8 probes
 Maximum safety during pellet
transport due to several separate
removal points
 8 probes can usually take the
place of an inclined floor and
therefore greatly increase the
storage volume
 Automatic function check –
"Rinsing" and "Changing over"
 If necessary, the pellet store can
be split into 2 zones
Additional advantages of 3 probes
 Maximum safety during pellet
transport due to several separate
removal points
 Automatic function check –
"Rinsing" and "Changing over"
Storage dimensioning:
Building heat load in kW x factor
0.75 = storage room volume in m³
Storage dimensioning:
Building heat load in kW x factor 0.9
= storage room volume in m³
Additional advantages of 1 probe
with "agitation"
 High operational safety due to
integrated "agitation" mixer
 Low purchase price
 Ideal solution for small pellet
quantities
Storage dimensioning:
sheet steel tanks up to 3.9 to
Fabric tanks up to 9 to
8 probes with automatic changeover unit
4
5
7
6
3
2
1
1
Changeover unit with
fire-protection cladding
2
Removal probe: Up to eight
removal probes and divisible
into two zones
3
Fastening clips for
delivery hose
4
Filling and return air pipes
for filling the storage room
via pellet tanker
5
Z-angle for storage room door
panels with 30 mm thickness
6
Impact mat made of plastic
7
Flexible delivery and return air
hose for transporting pellets to
the BioWIN pellet boiler
When planning the storage room,
please take into account the possibility
of residual amounts of pellets between
the probes
This unique development is excellently suited to a wide range of storage room conditions
Pellet storage room
Sheet steel tank
Fabric tank
Representative photo
Earth tank
9
The optimal pellet
storage room
The correct dimensioning
Section through the storage room –
Front view
The storage room should be large enough to store the
quantity of fuel required for one year. The size of the
storage room depends on the building heating load.
In principle the following rule of thumb applies:
Building heating load in kW x factor 0,9 m3/kW
= storage room volume in m3 (incl. empty space)
Filling (metal
pipe)
Air space
Example 1
15 kW x 0,9 m3/kW
= 13,5 m3 storage room volume
that corresponds to a room of approx.
2 x 3 m floor area and 2,25 m height.
Example 2
Duplex house with building
heating load of 26 kW:
26 kW x 0,9 m /kW
= 23,4 m3 storage room volume
3
that corresponds to a room of approx.
2,6 x 4 m floor area and 2,25 m height.
Side slope
(approx. 40° ±
5°) for better
emptying of
the room.
Surface
maximally
smooth (e.g.
Laminate).
Useful volume
= approx. 2/3 of the
room volume
Empty
space
Pellet feed
and return
air hose
Suction probe
Filling and return air
connection
Side slopes for
better emptying of
the room.
10
3 suction probes
Fully automatic
switch over unit
max room height 2,5 m
min. 20 cm
Single-family house with building
heating load of 15 kW:
Return air
(metal pipe)
Warmth when you need it
BioWIN
Front view
View from above
1)
2)
3)
Only for Klassik/Premium types
Only for Premium/Exklusiv types
The minimum distance can be
reduced by up to 50 mm on request
All measurements in mm
Technical data BioWIN
Type
Rated output range
Pellet reserve supply container capacity
Installation dimensions W x D x H (in the wood partition)
Flue gas connection diameter
Power consumption at nominal load
Power consumption Part load
kW
kg
mm
mm
W
W
BioWIN 100
2.9 – 9.9
150.8
130
46
27
BioWIN 150
BioWIN 210
4.4 – 15.0
6.1 – 21.0
150.8
150.8
1.200 x 790 x 1.610
130
130
58
100
32
40
BioWIN 260
7.5 – 25.9
150.8
130
110
47
BioWIN Cascade (BWE390/520)
View from above
* Each individual BioWIN requires an access space
of 500 mm (to either the left or the right)
If this access is provided, the additional clearance
can be reduced to 150 mm
** If an access space of 500 mm is provided, this
clearance can be reduced to 50 mm
All measurements in mm
Technical data BioWIN Cascade
Model variants
Nominal thermal output range
Comprising
kW
IMPORTANT: Observe details of planning document!
BioWIN 390
6.1 – 42.0
2 BioWIN Exklusiv 210
BioWIN 520
7.5 – 51.8
2 BioWIN Exklusiv 260
BioWIN 780
7.5 – 77.7
3 BioWIN Exklusiv 260
11
Austria
Windhager Zentralheizung GmbH
Anton-Windhager-Straße 20
A-5201 Seekirchen bei Salzburg
T. +43 (0) 62 12/23 41-0
F. +43 (0) 62 12/42 28
info@at.windhager.com
Windhager Zentralheizung GmbH
Carlbergergasse 39
A-1230 Wien
Windhager Zentralheizung GmbH
Tiroler Straße 25
A-6424 Silz
Germany
Windhager Zentralheizung GmbH
Deutzring 2
D-86405 Meitingen bei Augsburg
T. +49 (0) 82 71/80 56-0
F. +49 (0) 82 71/80 56-30
E-Mail: info@de.windhager.com
Windhager Zentralheizung GmbH
Heinrich-Rudolf-Hertz-Straße 2
D-04509 Delitzsch bei Leipzig
Windhager Zentralheizung GmbH
Gewerbepark 18
D-49143 Bissendorf
Switzerland
Windhager Zentralheizung Schweiz AG
Industriestrasse 13
CH-6203 Sempach-Station bei Luzern
T. +41 (0) 41/469 469-0
F. +41 (0) 41/469 469-9
info@ch.windhager.com
Windhager Zentralheizung Schweiz AG
Rue des Champs Lovats 23
CH-1400 Yverdon-les-Bains
Windhager Zentralheizung Schweiz AG
Dorfplatz 2
CH-3114 Wichtrach
France
Windhager Chauffage Central
France S.A.S.
1, rue du Maire Georges Baruch
Z.A.C. Nord du Rosenmeer
F-67560 Rosheim
T. +33 (0)3 88 81 82 17
F. +33 (0)3 88 95 81 85
info@fr.windhager.com
Italy
Windhager Italia S.R.L.
Via Ungheresca sud
I-31010 Mareno di Piave (TV)
T. +39/04 38/49 91 43
F. +39/04 38/49 78 84
info@windhager.it
United Kingdom
Windhager UK Ltd
Tormarton Road
Marshfield
South Gloucestershire, SN14 8SR
T. +44/12 25/89 22 11
info@windhager.co.uk
0612 036104/08
Your expert PARTNER
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising