Description Features PP5281'/('/$03 •

Description Features PP5281'/('/$03 •
PP5281'/('/$03
P/N: L-819EGW
HIGH EFFICIENCY RED
GREEN
Features
Description
•/2:32:(5&2168037,21
The High Efficiency Red source color devices are
•81,)250/,*+7287387
• /($'6:,7+21(&20021&$7+2'(/($'
made With Gallium Arsenide Phosphide on Gallium
Phosphide Orange Light Emitting Diode.
The Green source color devices are made with Gallium
•I&&203$7,%/(
• /21*/,)( 62/,'67$7(5(/,$%,/,7<
Phosphide Green Light Emitting Diode.
• RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAB4014
REV NO: V.6
DATE: NOV/16/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.LI
PAGE: 1 OF 4
Selection Guide
Part No.
Dice
Iv (mcd)
@ 20mA
Lens Type
Min.
Typ.
36
80
18
50
HIGH EFFICIENCY RED (GaAsP/GaP)
L-819EGW
Viewing
Angle
WHITE DIFFUSED
GREEN (GaP)
2 θ 1/2
50°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
Green
λD
Dominant Wavelength
∆λ1/2
Max.
Units
Test Conditions
627
565
nm
IF=20mA
High Efficiency Red
Green
625
568
nm
IF=20mA
Spectral Line Half-width
High Efficiency Red
Green
45
30
nm
IF=20mA
C
Capacitance
High Efficiency Red
Green
15
15
pF
VF=0V;f=1MHz
VF
Forward Voltage
High Efficiency Red
Green
2.0
2.2
2.5
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
Green
10
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Green
Units
Power dissipation
105
105
mW
DC Forward Current
30
25
mA
Peak Forward Current [1]
160
140
mA
5
5
V
Reverse Voltage
Operating / storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAB4014
REV NO: V.6
DATE: NOV/16/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.LI
PAGE: 2 OF 4
L-819EGW
High Efficiency Red
SPEC NO: DSAB4014
REV NO: V.6
DATE: NOV/16/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.LI
PAGE: 3 OF 4
Green
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAB4014
REV NO: V.6
DATE: NOV/16/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.LI
PAGE: 4 OF 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising