mvc-7100 b
1
3
2
4
7
6
5
8
0.60
[15,2]
0.65
[16,6]
3.26
[ 82,7 ]
CONNECTION EXAMPLE
(MV_CBL_TYPE1 SHOWN)
Molex Connector
See Detail A
See Molex Connection Table
REV
DATE
ECN No.
ENG
A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Connect Molex to DVR
A
A
J1
1.72
[43,8]
J2
2.41
[61,2]
3X
CAMERA CONNECTORS
MOUNTING RING
SEE NOTE #5
0.17
[ 4,4 ]
0.80
[20,4]
3.26
[ 82,7 ]
B
3X
1.07
[27,1]
0.09
[ 2,4 ]
1.07
[27,1]
0.62
[15,6]
D
PART NUMBER
VENDOR
MINI-FIT PLUG HOUSING, 3 POS.
39-01-4032
MOLEX
J1
MINI-FIT RECEPTACLE HOUSING, 3 POS.
FEMALE BNC PLUG, 75 OHM
31-10-75 or Equiv.
AMP
J2
MALE BNC PLUG, 75 OHM
PIN
1.20
[30,4]
CONNECTION NUMBER
1
Power +
2
Power -
3
Audio
MATING CONNECTOR
Pin 1
See Molex Connection Table
SIGNAL
1.20
[30,4]
SCALE
MOUNTING HOLES
SURFACE ANGLE MOUNT
SEE NOTE #5
PART NUMBER
VENDOR
39-01-4030
MOLEX
031-71013-RFX
AMP
B
SURFACE MOUNT RING
SEE NOTE #5
1.500
SURFACE ANGLE MOUNT RING
SEE NOTE #5
15.0°
2.26
[ 57,4 ]
BOLT CIRCLE
1.23
[31,3]
NOTES:
1. PART NUMBERS:
MVC-7100-29-W "Mini-dome, 600TVL, 2.9mm lens, white, No IR"
MVC-7100-36-W "Mini-dome, 600TVL, 3.6mm lens, white, No IR"
MVC-7100-60-W "Mini-dome, 600TVL, 6.0mm lens, white, No IR"
MVC-7100-29-WI "Mini-dome, 600TVL, 2.9mm lens, white, with IR"
MVC-7100-36-WI "Mini-dome, 600TVL, 3.6mm lens, white, with IR"
MVC-7100-60-WI "Mini-dome, 600TVL, 6.0mm lens, white, with IR"
MVC-7200-29-W "Mini-dome, 600TVL, 2.9mm lens, white, with WDR"
MVC-7200-36-W "Mini-dome, 600TVL, 3.6mm lens, white, with WDR"
MVC-7200-60-W "Mini-dome, 600TVL, 6.0mm lens, white, with WDR"
2. OPERATION:
This assembly is used in conjunction with MobileView DVR
3. SPECIFICATIONS:
a. Operating Temperature: -10C to ~+50C (14F to +122F)
b. Operating Voltage: 12 VDC Nominal
c. 0.84 W (Without IR)
2.0 W (With IR)
d. Nominal Weight: 0.88 lbs (400 g)
4. Dimensions Shown are: Inch [mm]
5. INSTALLATION:
a. Assembly may be Mounted in Interior Location Only
b. Loosen Allen Screw to Remove Dome Cover
c. Drill Three Mounting Holes and One Cable Hole, as Shown on Drawing, in the Mounting Surface.
d. Feed Power/Video Cable Through Large Hole in Mounting Surface
f. Attach Camera to Mounting Surface Using Appropriate Hardware.
Use Backing Plates if Necessary for Stability.
FLUSH MOUNT: Do Not Use the Mounting Ring. Attach Camera Directly to Mounting Surface.
SURFACE MOUNT: Attach Mounting Ring to Mounting Surface, and Attach Camera to Mounting Ring.
SURFACE ANGLE MOUNT: Attach surface angle mount to mounting surface and then attach camera
to surface angle mount.
g. If Possible, Adjust Camera Angle/Position for Desired Field of View. See Camera Installation
Manual for Adjustment.
i. Reattach Dome Cover.
1
CAMERA CONNECTOR
0.69
[17,5]
1.38
[35,1]
C
MATING CONNECTORS
MOLEX CONNECTION TABLE
1.74
[ 44,2 ]
Connect BNC to DVR
CABLE LENGTH APPROX 9.0 INCHES
2
3
C
1.73
[44,0]
3.24
[82,4]
APPROX.
MOUNTING HOLES
SURFACE MOUNT
SEE NOTE #5
0.75
[19.1]
1.75
[ 44,5 ]
MOUNTING HOLES
FLUSH MOUNT
SEE NOTE #5
2.73
1.07
[ 69,2 ]
[27,1]BOLT CIRCLE
2.47
[ 62,7 ]
BOLT CIRCLE
1.18
[30,0]
1.07
[27,1]
1.18
[30,0]
Inch
.XX
±
.XXX ±
FRACTION ±
ANGLES ±
SURFACE
FINISH
MM
.010 .254
.005 .127
.03 .762
1 DEG
63 1.6m
TITLE:
MVC-7100, MINI-DOME CAMERA
This document is the property of Mobileview, UTC Building and Industrial Systems and contains
proprietary information of Mobileview. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without
the express written consent of Mobileview, and that the information shall be used by the
recipient only as approved expressly by Mobileview. This document shall be returned to
Mobileview upon its request. This document may be subject to certain restrictions under
U.S. export control laws and regulations.
UNLESS OTHERWISE NOTED
0.62
[15,6]
1.23
[31,3]
4
0.68
[17,3]
1.36
[34,6]
5
THIRD ANGLE PROJECTION
DRAWN BY:
PATR
MATERIAL:
DATE:
FINISH:
5-24-14
FILE NAME:
SCALE:
MVC7100
6
D
STANDARD TOLERANCE
1.000
7
SIZE:
A
SHT:
1/1
DRAWING NUMBER:
MVC-7100_B
REVISION: RELEASE LEVEL:
B
B
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising