DGS-1004T - 04 x 10/100/1000

DGS-1004T - 04 x 10/100/1000
Higher Bandwidth Plug-&-Play Networking
8.0Gbps Switch Fabric
Per Port Status
& Diagnostic LEDs
Up To 8000Mbps Data
Transfer Rate
Auto 10/100/1000
Network Detection
GigaExpress™ Network
4-Port Gigabit
Introducing the D-Link GigaExpress
DGS-1004T, a 4-port Gigabit switch delivering
power and speed when you need it most. Ideal
for office, workgroup or creative production
environments that need to quickly transfer
large, bandwidth intensive files like graphics,
CGI, CAD or video, the DGS-1004T is a
workhorse switch that’s at home no matter
what operating systems are in play —
Windows, Macintosh, Unix, or Linux.
TM
The DGS-1004T provides 4 auto-negotiating
Gigabit Ethernet ports operating at 10/100/
1000Mbps. Intelligent auto-negotiation and
auto-sensing at each port makes the DGS1004T a plug-and-play solution for any gigabit
application.
Front panel diagnostic LEDS indicate per port
status, allowing for quick error detection and
correction on any port.
The GigaExpress DGS-1004T offers built-in
flow control mechanisms to alleviate traffic
congestion in the network and enables
accurate and reliable data transmission,
including IEEE 802.3X Flow Control for fullduplex mode and back-pressure flow control
for half-duplex mode. The GigaExpress DGS1004T also utilizes full wire speed store and
forward switching technology and support for
up to 8,000 MAC addresses, ensuring
maximum network performance and
scalability.
Capable of wire transfer speeds at up to 2000
Mbps per port and supporting 2.5Mbits RAM
for data buffering, the GigaExpress DGS1004T is a must-have for any network desiring
speed, power, and efficiency.
GigaExpress™ Network
4-Port Gigabit
SPECIFICATIONS
Ports
Four 10/100/1000Mbps
RJ-45 Auto-sensing ports
Standards
• IEEE 802.3 Ethernet
• IEEE 802.3u Fast Ethernet
• IEEE 802.3z Gigabit Ethernet
• IEEE 802.3x Flow Control
Network Interface
• RJ-45: 100ohm, UTP/ STP
cable
• 10/100Base – EIA/ TIA
Categories 3 or 5 cable
• 1000Base – EIA/ TIA
Categories 5, 4 pairs
Switching Method
• Store – and – forward
Switch Fabric
• 8.0Gps
MAC Address Table
• 8,000 entries
Filtering/ Forwarding/ Learning
Rates
• Full line rate/full wire speed
Size
• Width: 280mm/11inches
• Depth: 180mm/7.9 inches
• Length: 44mm/1.73 inches
LEDs
• 1000Mbps – one per port
• 100Mbps – one per port
• Power
• Link/Act (activity)
Temperature
• Operating: 32° to 104°F
(0-40°C)
Humidity, non-condensing
• 5% to 90%
The D-Link DGS-1004T provides a costeffective Gigabit solution for power users,
small workgroups or office backbones. The
combination of auto-configuration and autosensing 10/100/1000BASE-TX support
make installation of the DGS-1004T a true
plug & play solution. The DGS-1004T
supports wire speed transfer rates at up to
2000Mbps per port, an increase of more
than 200 times standard 10Mbps Ethernet.
Power Requirements
• Universal AC input: 100 to
240 VAC, 50 to 60 Hz
Power Consumption
8 Watts (Max)
EMC/ Safety Compliances
• CE Mark
Emissions
• FCC Class A
Safety
• UL
Warranty
• Limited 5 Year Warranty
on Electronic Components
• Limited 3 Year Warranty
on Fans & Power Supplies
D-Link Systems, Inc. 53 Discovery Drive Irvine CA 92618 www.dlink.com
'Copyright D-Link Systems, Inc. 2002. All rights reserved. D-Link¤ is a registered trademark of D-Link Systems, Inc. Other
trademarks or registered trademarks are the property of their respective manufacturers or owners.
Price and specifications are subject to changes without notice. See inside package for warranty details.
* 24/7 Tech Support is available only in USA.
Higher Bandwidth
Plug-&-Play Networking
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising