FAAC 885 Slide Gate Operator Gate Opener Installation Manual

Below you will find brief information for 885 Slide Gate Operator. The 885 Slide Gate Operator is a powerful and versatile gate opener that is perfect for a variety of residential and commercial applications. It features a 1 hp motor, a 100% duty cycle, and a maximum gate leaf weight of 1800 lbs. It is also equipped with an entrapment protection system that helps to prevent injuries. You can use the 885 to open and close your gate automatically or manually.

PDF Download
Document
FAAC 885 Slide Gate Operator Installation Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 100% Duty Cycle
  • Entrapment Protection
  • Maximum Gate Leaf Weight 1800 lbs.
  • Maximum Gate Leaf Length 35 ft
  • Adjustable Force Output
  • Audible Alarm
  • Optical Encoder
  • Programmable Settings

Frequently asked questions

You can adjust the force setting by using the + and - buttons on the control panel. Start with a force setting of 4 or 5, then adjust it appropriately for the entrapment protection to work properly. Remember to comply with UL325, the gate must stop and reverse if it encounters a force of 40 lbs. or more. Be sure that force setting is adjusted appropriately.

Programming the 885 is accomplished by using the +, -, and F buttons located near the display on the control panel. Each time the F button is pressed, the next function is displayed. Each time the F button is released, the value for that function is displayed and can be modified with the + and - buttons. Refer to the Programming section on page 13 in the manual for more detailed instructions.

The 885 Slide Gate Operator can handle a maximum gate leaf weight of 1800 lbs.
Preparing document for printing…
0%