THE MOST FLEXIBLE, MOBILE-READY, Wi-Fi® SOLUTION FOR M2M AND IOT APPLICATIONS Medical

THE MOST FLEXIBLE, MOBILE-READY, Wi-Fi® SOLUTION FOR M2M AND IOT APPLICATIONS Medical
Embedded Wireless
Medical
Device Server
THE MOST FLEXIBLE, MOBILE-READY,
Wi-Fi® SOLUTION FOR M2M AND
IOT APPLICATIONS
Reduce your development costs, shorten your time to market,
and leverage mobile solutions with xPico® Wi-Fi®, one of the
world’s smallest and most flexible Wi-Fi device servers. xPico
Wi-Fi is a pin and form factor compatible state-of-the-art
member of the xPico family, providing low power, Soft AP and
simultaneous client mode, full IP and WLAN stacks. The xPico
Wi-Fi is a complete device server suitable for mobile M2M
applications and includes industry best 5-year warranty.
Tablet & Smartphone Enable Your Devices
Access your data and devices from anywhere – wired or wireless.
Lantronix® industry-proven device server application and protocol stacks
enables seamless remote access to device data, simplifying design
integration, all while providing robust connectivity – including the ability
to access data from any mobile device, including smartphones and tablets.
Robust Networking Solution
Lantronix’ xPico Wi-Fi is an extremely compact, low power networking
solution that enables wireless LAN connectivity on virtually any solution
with a SPI, USB (device) or serial interface.
Simultaneous Access Point & Client Mode
The xPico Wi-Fi is a state-of-the-art solution that offers all the functions
one can expect including a unique simultaneous Soft AP and client
mode. This allows for easy points of access while maintaining a secure
network connection.
Flexibility
All members of the xPico product family use the same pin compatible
interface, providing unmatched flexibility whether it is Wi-Fi or Ethernet
when it comes to choosing the right network device for your application.
Cost Savings & Faster Time-To-Market
As one of the smallest embedded device servers in the world, xPico Wi-Fi
can be utilized in designs typically intended for chip solutions, befitting in
advantages to cost and time-to-market. Its “zero host load” eliminates any
need for drivers on the connected microcontroller making implementation
easy and fast with virtually no need to write a single line of code. This
translates to considerably lower development costs and faster time-tomarket. As xPico Wi-Fi meets FCC Class B, UL and EN EMC and safety
compliance, your development time is shortened. xPico Wi-Fi can reduce
the overall cost of ownership compared to the competition.
xPico Wi-Fi
Actual Size
24mm
16.5mm
xPico Wi-Fi Highlights:
• Chip-sized footprint: 24mm x 16.5mm
• Low power (6µA Standby)
• Can be operated off batteries
• IEEE 802.11 b/g/n (2.4 GHz)
• Simultaneous Soft AP and client mode
• Complete device server application with full IP Stack and
web server
• Dual serial port with data rate of up to 921 kbps
• SPI with clock rate of 30MHz
• USB 2.0 full rate device mode*
• 256-bit AES Encryption
• Industrial temperature range : -40° to +85° C
• 5-Year limited warranty
*Software support for these features available in a future software release. Please contact sales representatives for more information.
Features and Specifications
> Wireless LAN Interface
•IEEE 802.11 b/g and IEEE 802.11n (single stream)
WLAN interface (2.4 GHz only)
•IEEE 802.11 d/h/i/j/k/w/r
•u.FL connector for external antenna
> Serial Interface
•Two Serial CMOS Ports (3.3V, 5V tolerant)
•300 to 921.6 Kbps
•Flow control XON/XOFF, RTS/CTS (SPort 1 only)
•Lantronix tunneling application
> Host Interface
•Dual Serial Port, SPI, USB 2.0* (device)
•8 GPIO
> Network Protocols
•TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS,
SNMPv1
> Networking Capabilities
•Soft Access Point with DHCP Server
•QuickConnect: Dynamic Profiles facilitate easy and rapid
connections to access points
> Management and Control
•Web Server - Landing Page
•CLI (Serial Monitor Port)
•XML import and Export (XCR)
•Field upgradable firmware (OTA)
> Security
•IEEE 802.11i Support – WPA-Personal, WPA2-Personal
•256-bit AES Encryption
> Architecture
•ARM Cortex M3 class processor with on-chip Flash and
SRAM
•1MB Flash and 128 KB SRAM
•1MB SPI Flash storage
> Power
Tablet & Smartphone enable devices
xPico WiFi provides simultaneous Soft AP and Client mode, allowing for easy points
of access while maintaining a secure network without the need for special clients.
Other members of the xPico product family:
xPico Wi-Fi SMT The same functionality of the xPico Wi-Fi but in a SMT
footprint. Choice of no antenna and with on module ceramic antenna available.
xPico A chip-sized networking solution that enables Ethernet connectivity on
•Input Voltage: 3.3VDC
•Low power consumption of approximately 6µA standby
virtually any device.
> Physical Interface
•40-pin Board-to-Board SMT Connector
xPico IAP A chip-sized networking solution that enables Ethernet connectivity
> Environmental
•Operating Temperature: –40° to +85° C
- For operation over +70° C a thermal pad is required
•Storage Temperature : –40° to +85° C
•Relative Humidity: 0% to 90% non-condensing
on devices for industrial and automation applications that require MODBUS
support.
Ordering Information
> Certifications
Americas
•FCC Class B, UL and EN EMC, Japan
Call: 800.422.7055
Email: sales@lantronix.com
Buy Online: http://www.lantronix.com
NASDAQ: LTRX
> Packaging
•Dimensions: 24mm (L) x 16.5mm (W) x 5.64mm (H)
•Weight: 2.5g
> Warranty
•5-Year Limited
Asia/Pacific
Call: +852.3428.2338
Email: asiapacific_sales@lantronix.com
Europe
Call: +31 (0) 76.52.3.6.74 4
Email: EMEA@lantronix.com
Japan
Call: +81.3.6277.8802
Email: japan_sales@lantronix.com
China
Call: +86.021.6237.8868
Email: Shanghai@lantronix.com
xPico Wi-Fi’s compact
form factor allows
for flexible design
integration with a
chip-sized footprint of
only 24mm x 16.5mm.
> Part Number
*Software support for these features available in a future software
release. Please contact sales representatives for more information.
> Description
XPW100100B-01xPico Wi-Fi— IEEE 802.11 b/g/n Device Server
Module, Extended Temp, Bulk, RoHS
XPW100100S-01xPico Wi-Fi— IEEE 802.11 b/g/n Device Server
Module, Extended Temp, Sample, RoHS
XPW100100K-01 xPico Wi-Fi— IEEE 802.11 b/g/n Device Server
Evaluation Kit w/ xPico Wi-Fi Module, RoHS
TWR-LTRX-XPWK xPico Wi-Fi Tower Module for Freescale Tower
System w/xPico Wi-Fi Module (Freescale Tower
System not included)
XPC100A001-01-BxPico Module Mounting Quick Clip Bulk pack (50 pc)
XPC100A002-01-B
xPico Module Thermal Pad Bulk Pack (50 pc)
© Lantronix, Inc. 2015. All rights reserved. Lantronix and xPico are registered trademarks of Lantronix, Inc. in the U.S. and certain other countries. Wi-Fi is a registered trademark of Wi-Fi Alliance. Freescale is a registered trademark and Tower is a trademark
of Freescale Semiconductor, Inc. All other trademarks and trade names are the property of their respective owners. 940-047 Rev F
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising