PDI STMs
Better Solutions Are Within ReachTM
MODEL NUMBER:
Document Number:
PDI STM’S
PD196-192R2
Installation of a PDI Standard Table Mount
Page 1 of 2
SCOPE:
To install a PDI-STM swing arm mount.
NOTES: Mounting fasteners are customer supplied. The
standard fastener requirement is a ¼” diameter grade 5 or higher
fastener.
TOOL LIST:
1. Safety glasses/goggles
2. Drill
3. Drill bit sized for the chosen mounting fasteners
4. 1” drill bit for coax hole
5. 1/8” hex key for pilfer proofing screw
6. Tools for installation of chosen mounting fasteners
Safety Steps:
1. Always wear safety glasses/goggles to prevent injury
from debris.
2. Follow the installation/removal instructions for your
existing products.
PROCEDURE:
STEP 1:
Locate and layout the bolt pattern for the mounting fasteners and
the coax/cable hole or cutout.
STEP 2:
Follow the manufacturer’s instructions for installation of the
chosen mounting fasteners.
Drill the fastener holes to the manufacturer’s specification.
Tighten the fasteners to securely hold the PDI-STM to the
mounting surface.
.
6.0”
152.4mm
5.0”
127mm
COAX LOCATION
0.75”
19.05mm
2.50”
63.5mm
5.0”
127mm
6.0”
152.4mm
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Mounting
Surface
Better Solutions Are Within ReachTM
MODEL NUMBER:
Document Number:
PDI STM’S
PD196-192R2
Installation of a PDI Standard Table Mount
Page 2 of 2
STEP 3:
Use the 1/8” hex key to remove the pilfer proofing screw and spacer.
STEP 4:
Install the arm (sold separately) into the table mount, taking care to properly align the base pin with the bushing to prevent
damage to the bushing during installation.
STEP 5:
Use the 1/8” hex key to reinstall the pilfer proofing screw and spacer.
Rotate the arm from side to side to verify that it moves smoothly and does not bind on the pilfer proofing screw.
Lift up on the arm to confirm that the arm cannot be removed while the pilfer proofing screw is installed.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising