Credanet
Introducing Credanet
Credanet – What is it?
Credanet is an advanced patented
electric heating system with
controllability that helps provide
significant reductions in home
energy consumption. Designed to
meet current standards of energy
efficiency as outlined in the
Housing Energy Efficiency Best
Practice Programme, Credanet
automatically 'learns' to use the
most efficient electricity tariff and
typically saves the homeowner
15% over conventional electric
storage heating.
It's the only centrally controlled
electric storage system recognised
within NHER/SAP calculations to
provide energy savings under the
generic name of "CELECT".
Credanet automatically complies
with the control requirements for
storage heating in Part L on the
Building Regulations.
Using a patented mains borne
signalling system, it utilises the
existing wiring to link a choice of
stylish, simple-to-install heaters.
The central controller intelligently
divides the home into three
independent heating zones,
adjustable by both time and
temperature. This means that
Credanet gives better demand
performance than gas by
achieving and maintaining desired
comfort levels faster and achieving
real zone separation.
Fingertip control
Credanet brings a new dimension in
control to home heating. It’s an
advanced electric heating system that
uses a central programmer to allow
fingertip control over the heating. The
home can be divided into three
independently controllable heating
zones, so the householder gets very
user-friendly central heating that’s easy
to control and makes the most of
clean, cheap and efficient electricity.
How does it work?
The Credanet central programmer, is
the heart of the system. Essentially, it
‘talks’ to the heaters to allow the user
much greater control over where, when
and to what temperature the heat is
provided, eliminating wasted heat and
energy. The programmer uses mains
borne signalling to communicate with a
range of appliances – whether they are
Creda SFH storage fan heaters, TSR
storage combination heaters or TPR
panel heaters.
10
Downstairs
Bedrooms
Spare Room
Works smarter to
save money.
Credanet automatically ‘learns’ to use
the most efficient electricity tariff to
save the user money. It understands
which tariff it is running on and will
optimise economy tariffs for maximum
efficiency. So whether controlling the
generation of heat to be stored for later
use or providing direct acting heat, the
most economic option is always
chosen. And as it works on virtually
any tariff including fixed and variable
period options, it offers greater
flexibility. (For variable tariffs, special
metering arrangements might be
required – the Creda Technical Helpline
can advise on 01782 385779.)
Example of programmed
time/temperature profile
for 3 zones.
Temperature (ºC)
The result? The right heat,
wherever and whenever
it's wanted.
Independent
tests show that
Credanet is a
more effective
and responsive
form of heating
than gas.
Each of the heaters has integral
factory-fitted transceivers, which are
set during installation. The Credanet
programmer then uses two-way
signalling to allow a time and
temperature profile to be controlled on
individual heaters.
Time of day
For interactive Credanet demonstration please visit:
www.creda-heating.co.uk - click on interactive demo
Benefits of zoning.
Zoning allows for 3 independently controlled
zones to be programmed adjustable by time
and temperature. Most people want a warm
bathroom first thing in the morning and a cosy
living room in the evening but may like the
bedrooms to be a couple of degrees cooler.
With Credanet, the user can have exactly what
is wanted.
From the comfort of the central controller, the
user can dictate the climate in the whole house.
And, as heat in each zone is only provided
according to need or preference, there can be
significant energy savings.
Easy installation.
As the system operates with mains borne
signalling, no additional wiring is required,
keeping installation costs to a minimum.
As well as being easy to fit, it helps achieve
excellent NHER and SAP ratings, which is a
major advantage for everyone.
Typical performance of a Credanet heating system
Typical performance of a gas heating system
11
Credanet
Centrally
Controlled
Heating
Designed to meet current
Key Features:
standards of energy
• Unique three independently
controlled channels adjustable by
time and temperature.
• Newera styling - slimmer profiles,
softer contours and a fresher
colour.
• Up to three comfort heating
periods can be programmed per
zone in each 24 hour period.
• Controller uses mains borne twoway signalling to control time and
temperature on individual heaters.
• Different settings possible for each
day of the week.
• Credanet heaters have an integral,
factory fitted transceiver which is
set on installation.
efficiency to reduce home
energy consumption the
Credanet controller can be
used as 1, 2 or 3 zones,
adjustable by both time and
temperature. Credanet
• Holiday function - up to 99 days.
automatically 'learns' to use
the most economic
electricity tariff via mainsborne signalling, linking
specially designed SFHA
storage fan heaters, TSR
storage combination heaters
and TPR panel heaters.
• Instant temperature adjustment
available for each zone.
• Localised boost facility on each
heater.
• Compact, neat and easy to use
central programmer.
• Operates on virtually all tariffs
including fixed and variable period
tariffs.
• Can help to achieve better NHER
and SAP ratings - a major benefit
for everyone
• Compatible with European Home
Automation Signalling Standards
allowing data exchange to
maximise economy.
• For some variable tariffs additional
components will be required from
the electricity supplier. (Refer to
our application design department)
• Can have up to 7 heaters per
zone.
Time display
12:01pm
MON
Day display
18
14
14
Zone 3 display (Example - Downstairs)
Zone 2 display (Example - Bedroom)
Zone 1 display (Example - Spare Room)
“9 simple steps to
profile the system”
Set switch
12
Credanet
Storage Fan
Heaters
CNT 18F
CNT 24F
Designed to store heat more
Features & Benefits:
effectively and only supply
• Economical storage heating with
controlled, highly responsive
output via a whisper quiet fan
system.
heat on demand, these
Credanet storage fan
heaters are the most
and achieve excellent NHER
• Boost feature.
ratings.
• Automatically regulates heat
storage and comfort levels via
central controller.
• High levels of insulation - more
effective at retaining stored heat
than a conventional storage heater.
Wiring:
CNT18F, CNT24F
• Fanned heat output avoids heat
stratification.
STORAGE
CIRCUIT
• Negative pressure air movement
through the storage core avoids
hotspots and heat leakage.
N
L
STORAGE FAN HEATERS
• Slimmest storage fan heater
available - only 187mm deep.
economical in their class
Fan / Boost
Circuit
Dimensions:
L
A Height
All models
705mm
B Width
CNT 18F
788mm
CNT 24F
1016mm
All models
187mm
C Depth
• Incorporates direct acting element
for instant “out of season” heating.
N
MAINS CABLE CONNECTING POINTS
Specification:
Product
Reference
Catalogue
Number
Rating
Storage
Direct
Acting
Charge
Acceptance (7Hrs)
Net
Storage
Weight
Number of
Elements
Number of
Core Bricks
CNT18F
70309
2.5 kW
1.5 kW
17.6 kWh
14.9 kWh
121kg
3
12
CNT24F
70319
3.4 kW
1.5 kW
23.5 kWh
20.0 kWh
158kg
4
16
Controller
79321
-
-
-
-
-
-
-
• Insulation - Opacified silicaceous aerogel and mineral fibre mat • Storage Core - High density iron oxide compound • Storage Elements - Mineral insulated stainless steel sheathed
• Fan Unit - Crossflow • Safety - Two level thermal safety overheat protection • Supply - 230/240V AC single phase
13
Credanet
Combi
Storage
Heaters
CNT 12C
CNT 18C
CNT 24C
Dimensions:
Highly efficient combination
Key Features:
storage heaters with a fast
• Provides a unique combination of
storage heating and ‘Warmflow’
(Direct) fan heating.
response, thermostatically
controlled, fan heater that
COMBI STORAGE HEATERS
• ‘Warmflow’ fan heater is more
responsive and more efficient at
maintaining desired room
temperature.
operates independently from
the storage heater. Ideal for
living areas that might need
• Avoids heat stratification, giving
more even heat throughout the room.
a boost of heat on demand.
• Quiet running fan.
• Boost feature.
• Heat storage and comfort levels
automatically regulated via
Credanet controller.
• Heat loads can be set to full or half
level on installation to suit application.
Wiring:
A Height
All models
760mm
B Width
CNT 12C
560mm
CNT 18C
788mm
CNT 24C
1016mm
All models
170mm
CNT 12C, CNT 18C, CNT24C
STORAGE ELEMENTS
2, 3 OR 4
HEATER HEAD
SENSOR
LIMIT
STAT &
CUT-OUT
C Depth
BOOST SWITCH
N
L
N
RESTRICTED
SUPPLY
WARNING
RESTRICTED AND NORMAL SUPPLIES MUST
BOTH BE CONNECTED TO THE SAME
PHASE OF ELECTRICITY SUPPLY
BLACK
CUT-OUT
BROWN
CUT-OUT
BLUE
TERMINAL BLOCK
HALF LOAD
CONNECTION
ALTERNATIVE
FAN
NEON
N
RED
L
ENSURE THAT
THE CABLES
ARE NOT TRAPPED
UNDER THE
HEATER LEGS
L NORMAL
N SUPPLY
N
L
MODE
SWITCHES
B TH TK
RESTRICTED
SUPPLY
LC(R)
CREDANET
SWL(R)
TRANSCEIVER N(R) N
L
BOARD
SWL
UNRESTRICTED
SUPPLY
GREY
ROOM TEMPERATURE
SENSOR
Specification:
Product
Reference
Catalogue
Number
Rating
Storage
Rating
Fan
Charge
Charge
Acceptance (7Hrs) Acceptance (8Hrs)
Weight
Number of
Elements
Number of
Core Bricks
CNT12C
79349
1.7 kW
1.0/0.5 kW
11.8 kWh
12.6 kWh
78kg
3
8
CNT18C
79359
2.5 kW
1.5/0.75 kW
17.6 kWh
18.5 kWh
114kg
4
12
CNT24C
79369
3.4 kW
2.0/1.0 kW
23.5 kWh
25.0 kWh
149kg
5
16
• Insulation - Opacified silicaceous aerogel and mineral fibre mat • Storage Core - High density iron oxide compound • Storage Elements - Mineral insulated stainless steel sheathed
• Safety - Two level thermal safety overheat protection • Supply - 230/240V AC single phase
14
Credanet
Panel Heaters
CNT 750P
CNT 1000P
CNT 1250P
CNT 1500P
CNT 2000P
Designed to provide
Features & Benefits:
controllable convected heat
• Compact design.
for smaller rooms, these
• Boost feature will provide comfort
levels whenever required.
heaters are suitable for
bedrooms and IPX4 rated
making them ideal for
bathrooms.
Dimensions:
PANEL HEATERS
• All models are splashproof and
suitable for installation in Zone 1 &
2 in areas such as bathrooms.
• Wide range of power outputs 750W to 2000W.
• Comfort levels are automatically
controlled via the Credanet
system.
• Features a detachable, hinged wall
mounting frame for ease of
installation and cleaning.
A Height
All models
420mm
B Width
CNT 750P
444mm
CNT 1000P
614mm
CNT 1250P
614mm
CNT 1500P
682mm
CNT 2000P
852mm
All models
93mm
C Depth
Specification:
Product
Reference
Catalogue
Number
Rating
Storage
CNT750P
85361
750W
CNT1000P
85362
1000W
CNT1250P
85363
1250W
CNT1500P
85364
1500W
CNT2000P
85365
2000W
• Elements - Finned, metal sheathed mineral filled type
• Supply - 230/240V AC single phase
15
RFrange
Non-wired
Control
Solutions
An innovative range of
electronic panel heaters
which offer non-wired radio
frequency control, suitable
for the domestic and
commercial market.
Digital Electronic
Thermostat:
• Integral drift compensation to
maintain a stable room temperature.
• Double pole on/off switch and
overheat protection.
• LED display when element is
energised.
Creda Saver:
• Plug in pre-programmed cartridge
with15 pre-set programmes.
• Comfort mode thermostat on heater.
• Economy mode thermostat on
Creda Saver.
Creda Zone Receiver:
• Plug-in receiver for heaters, to enable
control via Creda Zone 1 or 4
controller.
• Integral thermostat for back-up.
• Automatic start up when
communication is restored.
• 433 MHZ operating band.
Creda Zone 1 & 4:
• Controls single or multiple heaters
within 1 to 4 zones.
• Time and temperature adjustment
24 hours a day, 7 days a week.
• Frost protection setting (5-15°C).
• Fall back temperature (5-30°C).
• Comfort temperature setting (5-30°C).
• Individual zone & measured zone
temperature LED display.
• Battery operated.
• Can be wall mounted or freestanding.
16
RFrange
Electronic Panel
Heaters
Key Features:
Wiring:
• Local or central control meets
Building Regulations
Part L.
• Digital electronic thermostat with
drift compensation for accurate
room temperature control.
Dimensions:
RF RANGE
RF HEATERS
Brown
Blue
Green/Yellow
Black
L
N(L)
Thermostat
• RF/E406S, RF/E410S Splash proof
to IPC24C - for safe use in
bathrooms.
E
Element
• Total flexibility in controllers with a
non-wired solution for easy
installation.
L
N(L)
Model
A Height
B Width
Control cable
RF/E408
400mm
645mm
RF/E410
400mm
735mm
RF/E412
400mm
915mm
RF/E415
400mm
1095mm
RF/E420
400mm
1365mm
RF/E406S
400mm
555mm
RF/E410S
400mm
735mm
RF/E208
200mm
1095mm
RF/E210
200mm
1275mm
RF/E212
200mm
1545mm
RF/E215
200mm
1725mm
Heaters type: 858*0
Thermostat
Element
Black
Brown
Blue
Green/Yellow
L
N(L)
Control cable
Heaters type: 858*0
855*0
C Depth across the range is 80mm
Specification:
Product
Reference
Catalogue
Number
RF/E408
Accessories:
Rating
Product
Reference
Catalogue
Number
Rating
Product
Reference
Catalogue
Number
85510
800W
RF/E410S
85840
1000W
Creda Zone 4 RF Controller
85710
RF/E410
85520
1000W
RF/E208
85610
800W
Plug-in Receiver
85711
RF/E412
85530
1200W
RF/E210
85620
1000W
Plug-in Creda Saver
85712
RF/E415
85540
1500W
RF/E212
85630
1200W
Cover for Controls
85713
RF/E420
85550
2000W
RF/E215
85640
1500W
Creda Zone 1 RF Controller
85715
RF/E406S
85820
600W
• Elements - Finned, metal sheathed mineral filled type • Protection - Two level thermal safety overheat protection • Supply - 230/240V AC single phase
17
Introducing SFHA Sensair
•
The SFHA Sensair provides the
ultimate combination of:
- Electric storage fan heating economy
- Direct acting heat flexibility
- Fanned heat output responsiveness
- Simple control
• Heat storage control on the Sensair
is fully automatic, as it uses the same
sensor technology as the market
leading Creda TSR Sensor Plus
range of storage heaters, giving
better comfort and economy
• High performance insulation levels
mean that the Sensair is more than
twice as effective at retaining heat as
a conventional storage heater. This
high level of heat retention gives a
superior level of controllability as
stored heat can be used on demand,
whatever the time of day
• Comfort levels are governed by an
electronic thermostat (accurate to
O.5°C) which is constantly
monitoring room temperature and
cycles the fan system (and heat
output) accordingly. The user
controls this from one single knob,
simplicity itself
• Heat output is via a quiet yet
powerful two speed fan. For added
flexibility there is a boost setting for
high speed room heat up
• For convenience the fan can be
switched off without altering the
thermostat setting
• The Sensair has a direct acting
facility which provides additional heat
if required, delivered into the room
via the heaters fast response fans
• The slimmest storage fan heater
available the same depth as a
slimline TSR
• Operates on virtually any tariff. Takes
better advantage of extended and
split tariffs
• Helps new and refurbished houses
achieve better NHER and SAP
ratings (by as much as 6 SAP rating
points compared to a manual input
static storage heater)
• Fanned heat output avoids heat
stratification, giving even heat
throughout the room
• Negative pressure air movement
through the storage core avoids
potential hotspots and heat leakage
• Lockable controls cover
18
The all-rounder
It’s slim. It provides heat morning,
noon and night. Plus it’s quiet, easy
to control and economic to run. In
short, the Creda SFHA Sensair
Automatic is just about the most
complete storage fan heater you
could find.
Easy to operate.
One easy-to-use control operates
room comfort. It is connected to a
highly accurate thermostat that
activates the fans if the room drops
0.5°C below the chosen temperature.
A second control provides the option
of selecting the output mode without
having to alter the thermostat setting.
Quiet fan
performance.
There are two normal fan speed
settings; the desired ‘comfort’ setting
and ‘boost’ for a rapid increase in
room heat. A further ‘combi’ setting
adds flexibility. It allows the use of
direct energy if there is insufficient
charge in the core or for unexpectedly
cold nights. Lastly, with the ‘off’
setting, the fans can be switched on
and off without altering the settings.
This helps to save energy during the
day when background heat is all that
is required.
The fan draws air through the storage
core into a hot/cold mixing system
before channelling it out into the
room. It is sucked rather than blown
to minimise the heat leakage or
hot spots that could compromise
safety. Very quiet in comfort mode,
the performance is still effective
enough to ensure an even room
temperature and more efficient
thermostatic control.
SFHASensairAutomatic
Superior heat
retention.
Sensair has the best heat retention
performance for a heater of its narrow
dimensions. In fact, it is more than
twice as effective at retaining heat as
a conventional storage heater. This
stems from generous use of high
specification insulation material. As a
consequence, once fully charged for
seven hours, it can be left on static
discharge (fans switched off) for as
long as 17 hours, yet still retain 40%
of the energy.
Leaders with
automatic
charging.
As pioneers of automatic storage
heating, you can be sure that Creda
knows how to give you superior
performance within the Sensair. It
uses a hydraulic thermostatic sensor
to measure both room and core
temperatures. This data is used to
gauge the level of charge required to
optimise use of off-peak electricity.
Ideal with virtually any tariff regime,
the auto-charge system is particularly
efficient with extended, split or threetier tariffs.
Direct acting heat
flexibility.
Firstly as the direct acting heating
element is housed in the fan area, the
heat is fanned to eliminate heat
stratification.
Secondly this eliminates the need for
an additional heater to be fitted to the
front and therefore allows for a
slimline design.
19
SFHASensair
Automatic
SFH18AW
SFH24AW
The ultimate combination of
Key Features:
electric storage fan heating.
• Fan can be switched off without
altering thermostat setting.
• Combines electric storage fan
heating, direct acting heating and
fanned heat output with simple
controls.
• Direct acting facility provides
fanned heat when required.
Able to regulate input with
direct acting heat flexibility,
the SFHA is more effective
at retaining heat than a
conventional storage heater.
Able to operate on virtually
any tariff and with superior
high performance insulation
levels, it achieves higher
SAP and NHER ratings than
manual input storage heaters.
Wiring:
SFH18AW, SFH24AW
STORAGE
CIRCUIT
N
Fan / Boost
Circuit
L
L
N
MAINS CABLE CONNECTING POINTS
20
• Fully automatic heat storage, using
the same technology as the Creda
TSR Sensor plus range.
• High performance insulation works
more effectively than a
conventional storage heater.
• Enables heat to be on demand
throughout the day.
• Heat output is via a whisper quiet
two speed fan.
• Boost setting for high speed room
heat up.
• Operates on virtually any tariff and
takes better advantage of
extended or split tariffs.
• Fanned heating avoids heat
stratification.
• Lockable controls cover.
• Newera colour aesthetics and
softform styling.
• Negative pressure air movement
through the storage core avoids
hotspots and heat leakage.
SFHASensairAutomatic
Dimensions:
SENSAIR AUTOMATIC
Heater Overview:
Core Heat Extraction:
• Three-in-one automatic
charge/discharge storage fan
heater available in 2.5kW and
3.4kW loading.
• Negative air pressure movement
through storage core to avoid
potential hotspots and heat
leakage.
Heat Output:
Charge Input:
1. Electric storage heating
• Automatic charging system using
economy, split and three tier tariffs.
2. Fanned storage heating
3. 1.5kW Direct acting fanned heating
A Height
All models
705mm
B Width
SFH18AW
788mm
SFH24AW
1016mm
All models
187mm
C Depth
Heat Retention
Performance:
Hydraulic Thermostat:
• Opacified silicaceous aerogel and
mineral fibre mat. Typical heat
retention after seven hour charge
and 17 hours static discharge
(fans off) - 40%.
• Adjustable hydraulic thermostat
control monitors and maintains
room temperature within 0.5°C of
desired comfort level.
Performance:
SFH24A Heat retention 3 part split tariff.
26
24
CHARGE PERIODS. 0200 - 0700, 1300 - 1600, 2000 - 2200.
22
20
18
NOMINAL DISCHARGE
kWh RETAINED HEAT
16
14
12
10
8
6
4
HIGH FAN SPEED
2
0
0
1
2
3
4
5
6
7
8
9
10
11
12 13
HOURS
14
15 16 17
18
19
20 21 22 23 24
1
2
HOUR
SFH24A Heat retention Economy 7.
kWh RETAINED HEAT
28
NIGHT TIME
CASE EMISSIONS
ENSURING 24hr
BACKGROUND HEAT
24
20
16
NO FAN
12
FAN LOW
8
40% CONTROLLABLE HEAT
4
FAN HIGH
0
0
1
2
3
4
5
6
7
8
MIDLIGHT
9
10 11 12 13 14 15 16
HOURS
17
18
19 20 21 22
23 24
HOUR
SUPPLY PERIOD
Specification:
Product
Reference
Catalogue
Number
Rating
Storage
Direct
Acting
Charge
Net Storage
Acceptance (7Hrs) Capacity
Weight
Number of Number of Remaining Useful Heat* (Fan Off)
Elements Core Bricks After 17 Hrs (Static) Discharge
SFH18AW 70305
2.5 kW
1.5 kW
17.6 kWh
14.9 kWh
121kg
3
12
40%
SFH24AW 70315
3.4 kW
1.5 kW
23.5 kWh
20.0 kWh
158kg
4
16
40%
• Insulation - Opacified silicaceous aerogel and mineral fibre mat • Storage Core - High density iron oxide compound • Storage Elements - Mineral insulated stainless steel sheathed
• Fan Unit - Two speed Crossflow fan • Controls (output) - Regulated by fan, controlled by integral adjustable electronic room thermostat • Controls (input) - Hydraulic head temperature
compensated, room and storage core temperature sensitive, auto-set charge control • Safety - Two level thermal safety overheat protection • Supply - 230/240V AC single phase
21
TSRSupaslim
Combi
TSR12CW/ACW
TSR18CW/ACW
TSR24CW/ACW
The Creda Supaslim Combi
Key Features:
heater is designed to
• Combines economic tariff rate
storage heater with a fast and
responsive Warmflow fan heater for
instant room heating.
combine economic and
efficient storage heating
Dimensions:
SUPASLIM COMBI
• The slimmest storage combination
heater available.
using low-cost tariff
electricity with an
• ‘Sensamatic’ fully automatic storage
heater output ensures room comfort
levels are maintained throughout
the day without user intervention.
independently thermostatcontrolled fan system.
Effectively two heaters in
• The Warmflow fan heater has
independent thermostatic control
accurate to within 0.5°C.
one, the built-in fan can
provide heat on its own or in
• Warmflow
LIMIT STAT gives better heat
AND CUT OUT
distribution
helping avoid heat
STORAGE ELEMENTS
stratification.
combination with the storage
heater for a rapid boost to
79368S
A Height
All models
B Width
TSR12CW/ACW 560mm
79358S
• Quiet, low
velocity
Warmflow fan.
79348S
room temperature.
TSR18CW/ACW 788mm
• All controls are concealed behind a
lockable flap.
• Newera colour and softform styling.
TSR24CW/ACW 1016mm
All models
C Depth
• ACW models feature automatic
input control for compliance with
building regulations, Part L1, for
N
new build. L
RESTRICTED
SUPPLY
Wiring:
TSR12CW, TSR18CW, TSR24CW
TERMINAL
BLOCK
(RED)
'OUTPUT'
THERMOSTAT
L
LIMIT STAT
AND CUT OUT
(BLUE)
PINK
(BLACK)
STORAGE ELEMENTS
(BROWN)
79368S
PINK
79358S
79348S
CUT
OUT
CUT
OUT
*1/2 LOAD
ENSURE THAT
THE CABLES
ARE NOT TRAPPED
UNDER THE
HEATER LEGS
(RED)
(GREY)
N
L
22
(RED)
TERMINAL
BLOCK
L
FAN
CONNECTION
ALTERNATIVE
ELEMENT ASSEMBLY
(WITH SAFETY CUT OUT)
N
N
UNRESTRICTED
SUPPLY
*
N
L
N
NEON
RESTRICTED
SUPPLY
UNRESTRICTED
SUPPLY
RESTRICTED
SUPPLY
'OUTPUT'
THERMOSTAT
L
760mm
170mm
TSRSupaslimCombi
Heater Overview:
Storage Heater
Charge Input Control:
• Two-in-one convection and fanned
storage combination heater in a
choice of three storage ratings.
• CW range have manually
adjustable hydraulic charge control
thermostat.
Fan Heater Control:
• ACW range have hydraulic charge
control thermostat providing Autoset charge control.
• Manually adjustable room
temperature sensing thermostat.
Heat Output:
• Non-fanned storage heating,
requiring no user adjustment for
even temperature control
throughout the day.
Thermostat:
• Adjustable hydraulic thermostat
control maintains room
temperature within 0.5°C of desired
comfort level.
User Controls:
• Positioned on the top right hand
side of the heater.
Control 1: Thermostatic fan control.
Control 2: Charge input.
Installation Options:
• Fan heater ratings can be set on
full or half load.
• Automatic fan heater switch-off
during off-peak tariff periods.
Performance:
Specification:
Product
Reference
Catalogue
Number
Rating
Storage
Direct
Acting
Charge
Charge
Acceptance (7Hrs) Acceptance (8Hrs)
Weight
Number of
Number of
Storage Elements Core Bricks
TSR12CW
79348
1.7 kW
1.0/0.5 kW
11.8 kWh
12.6 kWh
78kg
2
8
TSR18CW
79358
2.5 kW
1.5/0.75 kW
17.6 kWh
18.5 kWh
114kg
3
12
TSR24CW
79368
3.4 kW
2.0/1.0 kW
23.5 kWh
25.0 kWh
149kg
4
16
TSR12ACW
75-772001
1.7 kW
1.0/0.5 kW
11.8 kWh
12.6 kWh
78kg
2
8
TSR18ACW
75-772002
2.5 kW
1.5/0.75 kW
17.6 kWh
18.5 kWh
114kg
3
12
TSR24ACW
75-772003
3.4 kW
2.0/1.0 kW
23.5 kWh
25.0 kWh
149kg
4
16
• Insulation - Opacified silicaceous aerogel and mineral fibre mat • Storage Core - High density iron oxide compound • CW controls (input) - (Storage) Hydraulic charge control thermostat,
manually adjustable for weather conditions • ACW controls (input) - (storage) Hydraulic head temperature compensated, room and storage core temperature sensitive • Controls (Fan Heater)
manually adjustable room temperature sensing thermostat • Safety - Two level thermal safety overheat protection • Supply - 230/240V AC single phase.
23
TSRSensor
Plus
TSR6AW
TSR12AW
TSR18AW
TSR24AW
The Multi-sense system in
Key Features:
the TSR Sensor Plus
• Multi-sense two thermostatic sensor
control system for heat storage and
room temperature control.
automatically controls heat
storage to maintain the
desired room temperature.
Working on any low-cost
tariff, these heaters monitor
the room temperature and
energy stored within the
heater core to avoid
overcharging. This can save
up to 15% of the energy
N
used by ordinary
storage
N
heaters.
Dimensions:
SENSOR PLUS
• The only storage heater available
that automatically monitors and
controls heat output through a
thermostatic sensor.
• Controls couldn’t be simpler - one
for input and one for output.
• Multi-sense system enables
energy savings of up to 15%.
• Multi-sense operates exclusively at
maximum efficiency on all
economy tariff periods.
• Automatic control means little if
any control adjustment - just set
and forget.
A Height
All models
705mm
B Width
TSR6A
335mm
TSR12A
560mm
TSR18A
788mm
TSR24A
1016mm
All models
170mm
• All Multi-sense sensors mounted
within the heater.
L
L
• Lockable controls cover.
• Newera colour and aesthetics with
softform styling.
Wiring:
C Depth
TSR6A, TSR12A, TSR18A, TSR24A
LIMIT STAT
AND CUT OUT
FACTORY SET
LIMITSTAT
STAT
ROOM
AND CUT OUT
TSR6AW
MODEL
ONLY
FACTORY SET
ROOM STAT
TSR6AW
MODEL
ONLY
LIMIT STAT
AND CUT OUT
FACTORY SET
LIMITSTAT
STAT
ROOM
AND CUT OUT
'A'
MODEL
ONLY
FACTORY SET
ROOM STAT
'A'
MODEL
ONLY
STORAGE ELEMENTS
79361/4/65
STORAGE ELEMENTS
79351/4/6S
STORAGE ELEMENT
STORAGE ELEMENT
79361/4/65
79341/4/6S
79351/4/6S
N
79341/4/6S
L
N
L
N
L
N
L
N
RESTRICTED
L
SUPPLY
RESTRICTED
SUPPLY
LIMIT STAT
AND CUT OUT
24
FACTORY SET
ROOM STAT
TSR6AW
MODEL
ONLY
TSRSensorPlus
Heater Overview:
Thermostat:
• Multi-sense storage heater
providing automatic control of heat
input and room temperature levels.
• Adjustable hydraulic thermostat
control to maintain room
temperature.
Storage Heater
Charge Input Control:
User Controls:
• Hydraulic charge control
thermostat providing Auto-set
charge control.
• Mounted right.
Control 1: Thermostatic output.
Control 2: Thermostatic charge
input.
Heat Output Control:
• Fully automatic heat monitor and
output controls, requiring no user
adjustment for even temperature
control throughout the day.
Performance:
Specification:
Product
Reference
Catalogue
Number
Rating
Storage
Charge
Acceptance (7Hrs)
Charge
Acceptance (8Hrs)
Weight
Number of
Elements
Number of
Core Bricks
TSR6AW
79331
0.9 kW
6.3 kWh
7.2 kWh
41kg
1
4
TSR12AW
79341
1.7 kW
11.8 kWh
12.6 kWh
77kg
2
8
TSR18AW
79351
2.5 kW
17.6 kWh
18.5 kWh
110kg
3
12
TSR24AW
79361
3.4 kW
23.5 kWh
25.0 kWh
145kg
4
16
• Insulation - Opacified silicaceous aerogel and mineral fibre mat • Storage Core - High density iron oxide compound • Storage Elements - Mineral insulated stainless steel sheathed
• Controls* (output) - Patented adjustable room temperature sensing thermostat controlling output damper • Controls (input) - Hydraulic head temperature compensated, room and storage
core temperature sensitive, Auto-Set charge control • Safety - Two level thermal safety overheat protection • Supply - 230/240V AC single phase
*79331 has no user controls
25
TSRSlimline
TSR6MW
TSR12MW
TSR18MW
TSR24MW
Dimensions:
Utilising a hydraulic heat
Key Features:
storage sensor to give
• High performance, high
technology off-peak economy.
greater accuracy and control
over heat input and room
temperature levels, TSR
Slimline heaters are
economical to run. With
manually operated input and
output controls, they’re easy
SLIMLINE
• Exceptionally quick and easy to
install.
• Hydraulic heat storage sensor
provides better control and
economy.
• Attractive, easy-to-use controls.
• Lockable controls cover.
• Slim, unobtrusive design.
to use too.
• Newera colour and aesthetics with
softform styling.
N
N
L
A Height
All models
705mm
B Width
TSR6MW
335mm
TSR12MW
560mm
TSR18MW
788mm
TSR24MW
1016mm
All models
170mm
L
C Depth
Wiring:
TSR6MW, TSR12MW, TSR18MW, TSR24MW
LIMIT STAT
AND CUT OUT
FACTORY
SET
LIMIT STAT
ROOM
STAT
AND
CUT
OUT
TSR6AW
MODEL
FACTORY
SET
ONLY
ROOM STAT
TSR6AW
MODEL
ONLY
LIMIT STAT
AND CUT OUT
FACTORY
SET
LIMIT STAT
ROOM
STAT
AND
CUT
OUT
'A'
MODEL
FACTORY
SET
ONLY
ROOM STAT
'A'
MODEL
ONLY
STORAGE ELEMENTSSTORAGE ELEMENTS
79361/4/65
STORAGE ELEMENT STORAGE ELEMENT
79361/4/65
79351/4/6S
79351/4/6S
79341/4/6S
79341/4/6S
N
L
26
N
L
N
N
L
L
N
Restricted
RESTRICTED
LSupply
SUPPLY
RESTRICTED
SUPPLY
LIMIT STAT
AND CUT OUT
FACTORY SET
ROOM STAT
TSR6AW
MODEL
ONLY
TSRSlimline
Heater Overview:
User Controls:
• Highly economical yet
straightforward manually controlled
storage heater.
• Mounted right.
Control 1: Discharge output.
Control 2: Charge input.
Storage Heater
Charge Input Control:
• Manually adjustable hydraulic
charge control thermostat.
Heat Output:
• Manual, thermostatically
controlled.
Performance:
Specification:
Product
Reference
Catalogue
Number
Rating
Storage
Charge
Acceptance (7Hrs)
Charge
Acceptance (8Hrs)
Weight
Number of
Elements
Number of
Core Bricks
TSR6MW
79334
0.9 kW
6.3 kWh
7.2 kWh
41kg
1
4
TSR12MW
79344
1.7 kW
11.8 kWh
12.6 kWh
77kg
2
8
TSR18MW
79354
2.5 kW
17.6 kWh
18.5 kWh
110kg
3
12
TSR24MW
79364
3.4 kW
23.5 kWh
25.0 kWh
145kg
4
16
• Insulation - Opacified silicaceous aerogel and mineral fibre mat • Storage Core - High density iron oxide compound • Storage Elements - Mineral insulated stainless steel sheathed
• Controls* (output) - Manually adjustable thermostat controlling output damper • Controls (input) - Hydraulic charge control thermostat, manually adjustable for weather conditions
• Safety - Two level thermal safety overheat protection • Supply - 230/240V AC single phase
*79334 has no user controls
27
TSFTurboStorage
FanHeater
TSF24K
TSF32K
TSF42K
Dimensions:
Creda TSF Turbo Storage
Key Features:
Fan Heaters provide
• TSF Turbo uses economy tariff
electricity, operating particularly
well on special daytime economy
periods.
controlled output space
heating with maximum
economy and flexibility.
• Available in three output capacities
- 3.6kW, 4.8kW and 5.7kW.
As the heater retains 40% of
• More controllable, providing heat
quickly when required.
total stored heat, the
• In-built direct element for out of
season heating using day rate
electricity.
thermostatically controlled 2speed centrifugal fan allows
for rapid, uniform heating.
• Fanned heat is faster and more
even in distribution, particularly
near ground level.
• Easy to use manual controls for
room thermostat and Economy
Charge, conveniently positioned
on the heaters side.
• Smooth, rounded, modern
appearance, compatible with
today’s home and office décor.
Wiring:
Off peak (restricted) supply
Single phase connection
L1/N/Earth 240V-
TSF24K, TSF32K, TSF42K
elements
6
5
4
3
2
1
R3
R2
R1
control thermostat
N
Off peak (restricted) supply
Three phase connection
3/N/Earth 415V-
6
5
4
3
2
1
N
N
N
tic charge control
ilable in UK)
stat controlled
ge supply
y heater supply
TSF 42k only
R7
M1
R9
1
2
28
control resistor
B Width
TSF24K
776mm
TSF32K
926mm
TSF42K
1076mm
All models
250mm
C Depth
Key:
L1
L2
L3
Live
Neutral
R1
R2
R3
Heating elements
TR
Charge control thermostat
STR
Thermal cut-out
(automatic reset)
RTR
Room temperature control
A2/Z2
A1/Z1
A2/Z2
Automatic charge control
(not available in UK)
LE
N
LE
Thermostat controlled
discharge supply
L1
L1
L3
L2
L1
L3
L2
L1
PE
A1/Z1
N
LH
L
On peak (24 hour)
supply 240VL
°C
RTR
stor
k only)
672mm
Earth
PE
1
2
7
8
9
10
All models
E
cutout
atic reset)
R8
A Height
N
TA
STR
emperature control
TURBO STORAGE
LH
Auxiliary heater supply
M1
Fan
R7
Fan resistor
(TSF-42k only)
R8
Charge control resistor
R9
Auxiliary heater
TSFTurboStorageFanHeater
Heater Overview:
User Controls:
• Fanned storage heater providing
maximum economy and
controllability on low rate and day
rate tariffs.
• Positioned on the right hand side
of the heater.
Control 1: Heat output.
Control 2: Charge input.
• Neon switch for fan.
Neon switch for direct acting
element.
Storage Heater
Charge Input Control:
• Adjustable hydraulic thermostat.
Heat Output Control:
• Controlled by an integral
thermostat.
Performance:
Typical TSF Turbo daily heat output.
ROOM TEMPERATURE (ºC)
24
22
20
18
16
14
12
2
0
4
8
6
10
12
14
16
18
20
22
24
HOURS
TSF 42 heat retention on E7 tariff.
45
NIGHT TIME
CASE EMISSIONS
ENSURING 24hr
BACKGROUND HEAT
kWh RETAINED HEAT
40
35
30
NO FAN
25
20
FAN LOW
15
10
FAN HIGH
5
42%
CONTROLLABLE
HEAT
0
0
1
2
3
4
5
MIDNIGHT
SUPPLY PERIOD
6
7
8
9
10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
HOURS
Specification:
Product
Reference
Catalogue
Number
Off Peak
Rating
Direct Acting
Element Load
Charge
Acceptance (7Hrs)
Charge
Acceptance (8Hrs)
Weight
Number of
Core Bricks
TSF24K
70369KS
3.6 kW
1.1 kW
25.2 kWh
28.8 kWh
137kg
18
TSF32K
70379KS
4.8 kW
1.5 kW
33.6 kWh
38.4 kWh
176kg
24
TSF42K
70389KS
5.7 kW
2.0 kW
39.9 kWh
45.6 kWh
215kg
30
29
TPRPanel
Heaters
TPR750W/TW
TPR1000W/TW
TPR1250W/TW
TPR1500W/TW
TPR2000W/TW
TPR panel heaters are
Key Features:
designed to complement the
• Compact, attractive design
occupying minimum wall space.
TSR range of storage
heaters to provide an
efficient mixed home heating
system. Exceptionally
compact and IPX4 rated,
they are ideal for smaller
rooms such as bathrooms
and bedrooms.
Timer models feature quartz
electronic programmers for
greater accuracy and
control.
• Ideal for smaller rooms such as
conservatories, bathrooms and
bedrooms.
Dimensions:
TPR PANEL HEATERS
• All models are fully IPX4 rated and
so can be installed in bathrooms in
zone 1 & 2.
• Wide range of heat outputs - 750W
to 2000W.
• All models controlled by highly
sensitive thermostat (accurate to
+/-1/3°C) for better temperature
control and economy.
• Wide temperature range setting,
from 5°C (frost protection) to 35°C.
• Safety cut-out feature on all
models.
• Newera colour and softform
styling.
A Height All models
420mm
B Width TPR750W/750TW
444mm
TPR1000W/1000TW
614mm
TPR1200W/1200TW
614mm
TPR1500W/1500TW
682mm
TPR2000W/2000TW
852mm
C Depth All models
30
93mm
TPRPanelHeaters
Heater Overview:
• Compact panel heater available
with or without quartz electronic
programmer.
Non Timer
TPR Models:
• Thermostat control to +/- 1/3°C.
Installation - All Models:
Thermostat:
• Gas filled, accurate to within +/1/3°C.
• Detachable, hinged wall mounting
frame for ease of installation and
cleaning.
TPR Timer Models:
• One metre of factory fitted cable
enables mains connection from
either side of heater.
• Quartz electronic, 24 hour with
manual override switch that will not
alter programmer settings.
Specification:
With Quartz Electronic programmer
Without Quartz Electronic programmer
Product
Reference
Catalogue
Number
Rating
Storage
Product
Reference
Catalogue
Number
Rating
Storage
TPR750TW
85301
750W
TPR750W
85311
750W
TPR1000TW
85302
1000W
TPR1000W
85312
1000W
TPR1250TW
85303
1250W
TPR1250W
85313
1250W
TPR1500TW
85304
1500W
TPR1500W
85314
1500W
TPR2000TW
85305
2000W
TPR2000W
85315
2000W
• Elements - Finned metal sheathed mineral filled type • Thermostat - Gas filled type,
accurate to ± 1/3°C • Programmer - 24hr high-temperature resistant Quartz Electronic
action timer with 15 minute selection segments. Manual override of programme selection
without timer re-setting • Supply - 230/240V AC single phase
• Elements - Finned metal sheathed mineral filled type • Thermostat - Gas filled type,
accurate to ± 1/3°C • Supply - 230/240V AC single phase
31
Accessories
Storage Heater
Shelves
TSR Towel Rails
TSR Guards
Creda heater accessories
are available to complement
the Creda storage and panel
heater ranges.
Storage Heater
Shelves:
• Available in four widths to cover all
sizes of TSR storage heaters and
SFHA storage fan heaters.
TSR Towel Rails:
• Available for TSR 6, TSR 12 and
TSR18 auto and manual models.
• Quick and easy to fit.
• Available in Newera white.
• Finished in Newera white.
Catalogue No.
Fits Heater
Catalogue No.
Fits Heater
79032S
TSR6
79130WS
TSR6 A&M
79042S
TSR12
79140WS
TSR12 A&M
79052S
TSR18/SFHA18
79150W
TSR18 A&M
79062S
TSR24/SFHA24
Heater Guards:
A range of guards, designed to
protect against accidental contact
with the hot surface of the heater, are
available for Creda heaters from our
suppliers:
Norfolk Industries,
95 Oak Street,
Norwich,
NR3 3BP.
Please contact them direct on:
Tel: 01603 667957 or
Fax: 01603 624265
32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement