Datasheet RC512-FE
Raisecom Technology Co., Ltd.
RC512-FE Remote Manageable Media Converter
RC512-FE 10/100M media converter is
designed for accessing broadband subscribers
at the edge of IP backbone network. It bridged
the bandwidth gap between traditional TDM
circuits and IP core by providing tailored
bandwidth from 32K to 100Mbps. Thanks
to the deployment of such media converter,
bandwidth-thirst services such as IPTV and
Video Conference were made possible.
RC512 series media converter performs the
media conversion between 10/100M copper
lines and 100M fiber links, effectively extending
Ethernet transmission distance from 100m
to 120km (need customization). According
to carriers’ specific network environment,
different fiber optic options from single-mode
to multimode, from single-strand to dual-strand
can be ordered.
Its robustness and dependability has made it
widely welcomed and popular with carriers and
ISPs. RC512 shall always be working in pairs.
Through SNMP agent, they can be both locally
and remotely managed in Raisecom iEMS. This
feature has greatly helped carriers to reduce
truck rolls and total cost of ownership.
Feature
Construction
RC512-FE: central office module fitting into RC series manageable chassis
RC512-FE-C: remote module fitting into RC series chassis
RC512-FE-S: remote standalone unit
Fiber optic options Single-mode/multimode, dual-strand fiber
Single-mode, single-strand fiber
Transmission
Dual-strand fiber: up to 120km
distance
Single-strand fiber: up to 100km
Maximum
1916 Bytes, long enough 'Baby Giant' for MPLS or other long-frame-length
transmission unit Ethernet services
Bandwidth
Both upstream and downstream bandwidth can be limited at 32K increment.
management
Flexible bandwidth from 32K to 100M can be assigned
Auto Negotiation The auto negotiation of copper interface allows RC51X-FE to perform
automatic configuration to achieve the best possible mode of operation over
a link. Customers may disable this function to avoid the mode of operation
dropping to the least common denominator when connecting with a nonnegotiating device (i.e. 10Mbps, half-duplex)
Auto-MDI/MDIX
Automatically detects and configures the copper interface on the converter
to crossover or straight-through cable configuration. This function eliminates
an entire category of troubleshooting
Fault-pass-through Fault-pass-through is a troubleshooting function that allows the media
converter to monitor the optical link by shutting down the copper interface if
receiving optical signals cannot be detected on fiber interface
Loopback
Loopback function enables network diagnostics from central office to remote
site (from RC512-FE to RC512-FE-C/S). It provides a flexible method of
troubleshooting while reducing carriers truck rolls and other maintenance
costs.
Remote
Through Raisecom iEMS network management system, carriers and
management
network administrators are able to monitor, configure, and even reset both
capability
central office module and remote standalone/module in an integrated GUI,
which helps to bring convenience and reduce truck rolls
Raisecom Technology Co., Ltd.
Room 217, Rainbow Plaza,
Shangdi Information Road,
Beijing 100085, China
Datasheet
Tel: +86 10 8288 3305
Fax: +86 10 8288 3056
Email: export@raisecom.com
http://www.raisecom.com
RC512-FE Remote
Manageable
Media Converter
Specification
Fixed Interface 1*fiber interface
1*copper interface
Indicators:
Power Supply
RMD for remote unit
RLK for optical port
TLK for optical port
ACT for optical port
LNK/ACT for copper port
100M for copper port
FDX for copper port
Speed
100M fixed fiber interface
10/100M auto-negotiation
copper interface
Dimensions
Module:
91(W)*155(D)*25(H)mm
Standalone:
120(W)*157(D)*32(H)mm
Power supply AC: 90~264V, 47~63Hz
DC: -75~-36V
Power
≤ 5W (at max load)
consumption
Working
Temp: 0~45 centigrade
ambience
RH: 20~90% non-condensing
Storage
Temp: -25~85 centigrade
ambience
RH: 20~90% non-condensing
Safety
CE, UL and NEBS
Compliance
@2006~2008 Raisecom Technology, Co., Ltd
All trademarks are the property of their
respective owners.
Technical information is subject to change
without notice.
Raisecom Technology Co., Ltd.
Typical Application
Compliance
Standards &
protocols
IEEE802.3
IEEE802.3x full duplex on
100BaseTX
IEEE802.3u 100BaseTX
Ordering Information
RC512-FE-X
Remote manageable 10/100M Ethernet media converter, central office
module fitting into RC series manageable chassis
RC512-FE-C-X
Remote manageable 10/100M Ethernet media converter, remote module
fitting into RC series chassis
RC512-FE-S-X
Remote manageable 10/100M Ethernet media converter, remote standalone
unit
X indicates the optical port specification:
Optical
Wavelengh Rx sensitivity Tx Power Typical distance Attenuation
Connector
(nm)
(dBm)
(dBm)
(km)
(dB/Km)
M
SC
1310/850*
<-29
-18 - -14
2
3
S1
SC
1310
<-34
-15 - -8
25
0.5
S2
SC
1310
<-34
-5 - 0
60
0.5
S3
SC
1550
<-36
-5 - 0(DFB)
120
0.25
SS13
SC
1310
<-30
-12 - -3
25
0.5
SS15
SC
1550
<-30
-5 - 0
25
0.5
SS23
SC
1310
<-32
-12 - -3
50
0.5
SS25
SC
1550
<-32
-5 - 0
50
0.5
SS34
SC
1490
<-32
-5 - -0
50
0.5
SS35
SC
1550
<-32
-5 - 0
50
0.5
* 850nm multi mode optical connector is customized
Raisecom Technology Co., Ltd.
Room 217, Rainbow Plaza,
Shangdi Information Road,
Beijing 100085, China
Tel: +86 10 8288 3305
Fax: +86 10 8288 3056
Email: export@raisecom.com
http://www.raisecom.com
@2006~2008 Raisecom Technology, Co., Ltd
All trademarks are the property of their
respective owners.
Technical information is subject to change
without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising