TIBCO BusinessEvents Views Installation ®

TIBCO BusinessEvents Views Installation ®
TIBCO BusinessEvents®
Views
Installation
Software Release 5.2.1
August 2015
Two-Second Advantage®
2
Important Information
SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH
EMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY
(OR PROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE
EMBEDDED OR BUNDLED SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY
OTHER TIBCO SOFTWARE OR FOR ANY OTHER PURPOSE.
USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND
CONDITIONS OF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED
SOFTWARE LICENSE AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE
CLICKWRAP END USER LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD
OR INSTALLATION OF THE SOFTWARE (AND WHICH IS DUPLICATED IN THE LICENSE FILE)
OR IF THERE IS NO SUCH SOFTWARE LICENSE AGREEMENT OR CLICKWRAP END USER
LICENSE AGREEMENT, THE LICENSE(S) LOCATED IN THE “LICENSE” FILE(S) OF THE
SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS AND CONDITIONS, AND
YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN AGREEMENT TO BE
BOUND BY THE SAME.
This document contains confidential information that is subject to U.S. and international copyright laws
and treaties. No part of this document may be reproduced in any form without the written
authorization of TIBCO Software Inc.
TIBCO, The Power of Now, TIBCO ActiveMatrix, TIBCO ActiveMatrix BusinessWorks, TIBCO
Administrator, TIBCO ActiveSpaces, TIBCO BusinessEvents, TIBCO Designer, TIBCO Enterprise
Message Service, TIBCO Hawk, TIBCO Runtime Agent, TIBCO Rendezvous, and Two-Second
Advantage are either registered trademarks or trademarks of TIBCO Software Inc. in the United States
and/or other countries.
Enterprise Java Beans (EJB), Java Platform Enterprise Edition (Java EE), Java 2 Platform Enterprise
Edition (J2EE), and all Java-based trademarks and logos are trademarks or registered trademarks of
Oracle Corporation in the U.S. and other countries.
All other product and company names and marks mentioned in this document are the property of their
respective owners and are mentioned for identification purposes only.
THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT
ALL OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED
AT THE SAME TIME. SEE THE README FILE FOR THE AVAILABILITY OF THIS SOFTWARE
VERSION ON A SPECIFIC OPERATING SYSTEM PLATFORM.
THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL
ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE
CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO
SOFTWARE INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S)
AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENT AT ANY TIME.
THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY OR
INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE,
INCLUDING BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES.
Copyright © 2004-2015 TIBCO Software Inc. ALL RIGHTS RESERVED.
TIBCO Software Inc. Confidential Information
TIBCO BusinessEvents® Views Installation
3
Contents
TIBCO Documentation Support and Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installer Log File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installer Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Hardware and Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing in GUI Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing in Console Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing in Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Uninstalling the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Uninstall in GUI Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Uninstall in Console Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Uninstalling in Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TIBCO BusinessEvents® Views Installation
4
TIBCO Documentation Support and Services
Documentation for this and other TIBCO products is available on the TIBCO Documentation site:
https://docs.tibco.com
Documentation on the TIBCO Documentation site is updated more frequently than any documentation
that might be included with the product. To ensure that you are accessing the latest available help
topics, please visit https://docs.tibco.com.
Product-Specific Documentation
Documentation for TIBCO products is not bundled with the software. Instead, it is available on the
TIBCO Documentation site. To directly access documentation for this product, double-click the
following file:
TIBCO_HOME/release_notes/TIB_businessevents-views_version_docinfo.html where
TIBCO_HOME is the top-level directory in which TIBCO products are installed. On Windows, the
default TIBCO_HOME is C:\tibco. On UNIX systems, the default TIBCO_HOME is /opt/tibco.
The following documents for this product can be found in the TIBCO Documentation site:
●
TIBCO BusinessEvents Views Installation
●
TIBCO BusinessEvents Views Getting Started
●
TIBCO BusinessEvents Views Developer's Guide
●
TIBCO BusinessEvents Views Release Notes
How to Contact TIBCO Support
For comments or problems with this manual or the software it addresses, contact TIBCO Support:
●
For an overview of TIBCO Support, and information about getting started with TIBCO Support,
visit this site:
http://www.tibco.com/services/support
●
If you already have a valid maintenance or support contract, visit this site:
https://support.tibco.com
Entry to this site requires a user name and password. If you do not have a user name, you can
request one.
How to Join TIBCOmmunity
TIBCOmmunity is an online destination for TIBCO customers, partners, and resident experts. It is a
place to share and access the collective experience of the TIBCO community. TIBCOmmunity offers
forums, blogs, and access to a variety of resources. To register, go to the following web address:
https://www.tibcommunity.com
TIBCO BusinessEvents® Views Installation
5
Installation Overview
The TIBCO Universal Installer is used to install and uninstall this TIBCO BusinessEvents add-on.
Installation Modes
You can run the TIBCO Universal Installer in GUI, console, or silent mode. Each mode is supported on
all platforms.
●
GUI Mode - In GUI mode, the installer presents dialogs that allow you to select a product, product
location, and so on.
●
Console Mode - Console mode allows you to run the installer on a command line. This is useful if
your machine does not have a GUI environment.
●
Silent Mode - In silent mode, the installer installs the product without prompting you for
information. The installer uses either default or custom settings that are saved in a response file.
Installation Environment
An installation environment isolates product installations. A product installed into an installation
environment does not access components in other installation environments.
An installation environment is the top-level installation directory for TIBCO products. An installation
environment consists of the following properties:
●
Directory - Identifies the name of the directory where the product is installed. This directory is
referred to as TIBCO_HOME.
●
Name - Identifies the installation environment. On Microsoft Windows, the name is a component of
the path to the product shortcut in the Windows Start > All Programs menu.
You must install into an existing TIBCO_HOME where TIBCO BusinessEvents is already installed.
Installer Log File
An installer log file is created during the installation that captures installation environment details,
such as the user that invoked the installer, host name, operating system details, list of assemblies
installed, and so on.
The location of the log file depends on the platform, as follows:
Windows
User_Home\.TIBCO\install_identifier
where identifier is the date and time the product was installed, and a unique number used to identify
this particular installation.
For example:
C:\Documents and Settings\franko\.TIBCO\install_03-02-2014.132827
Linux
$HOME/.TIBCO/install_identifier
where identifier is in the date and time the product was installed, and a unique number used to identify
this particular installation.
For example:
/home/user1/.TIBCO/install_03-02-2014.134908
TIBCO BusinessEvents® Views Installation
6
Installation Requirements
Before you run the installer, ensure that you meet all the hardware and software requirements and you
have appropriate privileges to run the installer.
The version of TIBCO BusinessEvents and all add-on products except TIBCO BusinessEvents Process
Orchestration, must match. When you upgrade TIBCO BusinessEvents, you must also upgrade all addon products, except TIBCO BusinessEvents Process Orchestration, in use to the same version. Similarly,
you cannot install a later version of an add-on onto an earlier version of TIBCO BusinessEvents. Addons must be at the same version as TIBCO BusinessEvents in order to work correctly.
Check the TIBCO Product Support web site at https://support.tibco.com for product information that
was not available at release time. Entry to this site requires a username and password. If you do not
have a username, you can request one. You must have a valid maintenance or support contract to use
this site.
Installer Account
Ensure that you have the appropriate privileges, depending on the platform on which you are
installing.
Platform
Account Privileges
Microsoft
Windows
You must have administrator privileges for the machine on which the software
is installed. If you do not have administrator privileges, the installer exits. You
must then log out of the system and log in as a user with the required
privileges, or request your system administrator to assign the privileges to your
account.
If you intend to install the product from a network drive, you must ensure that
the account used for installation has permission to access the network drive.
Linux
The software can be installed by a regular (non-root) user and super-user (root).
Different users can install the same product at different locations.
The user performing the installation must have Read Write Execute permissions
on all files and directories, after the file is unpacked. The file structure after
unpacking must be identical to the structure that was packed.
Installation of TIBCO BusinessEvents add-on products must be performed by
the same user who installed TIBCO BusinessEvents. Dependency checking will
not work correctly unless the same user installs all dependent products.
A windowing environment such as CDE (that is, X11 Windows) is required to
run the installer in GUI mode.
Hardware and Software Requirements
This add-on product requires prior installation of TIBCO BusinessEvents® software.
The version of TIBCO BusinessEvents and all add-on products except TIBCO BusinessEvents Process
Orchestration, must match. When you upgrade TIBCO BusinessEvents, you must also upgrade all addon products, except TIBCO BusinessEvents Process Orchestration, in use to the same version. Similarly,
you cannot install a later version of an add-on onto an earlier version of TIBCO BusinessEvents.
For information about the hardware and software requirements, as well as supported platforms, related
TIBCO software, and third party products, see the readme file that is provided with the product.
TIBCO BusinessEvents® Views Installation
7
Installing the Software
The TIBCO Universal Installer can be used to install in GUI mode, console mode, or silent mode.
You can install multiple products at one time by extracting the product archive files to the same
temporary directory. For example, you can install TIBCO BusinessEvents and one or more add-ons
together. Or if you have already installed TIBCO BusinessEvents, you can install multiple add-ons
together.
This technique works in the GUI and Console modes but not in Silent mode. In Silent mode, the silent
installation file is overwritten with the last product that you extract, and installs only the last extracted
product.
Installing in GUI Mode
When you run the installer in GUI mode, it prompts you for information about the installation
environment, and allows other customization.
Procedure
1. Open the physical media or download the software package from http://www.download.tibco.com.
For downloading you will need your username and password. If you did not receive a username
and password, contact TIBCO Technical Support.
2. Extract the contents of the package to a temporary directory.
3. Navigate to the temporary directory and run TIBCO Universal Installer:
●
On Microsoft Windows, double-click TIBCOUniversalInstaller.exe.
●
On Linux, run TIBCOUniversalInstaller-platform_acronym.bin.
4. Review the information in the Welcome screen, and click Next.
The License Agreement dialog displays.
5. Review the terms of the license agreement and, if you agree, click I accept the terms of the license
agreement. Then, click Next to continue with the installation. If you are installing multiple add-on
products, you must accept each license separately.
(If you do not agree to the terms of the license agreement, click Cancel to exit from the installation
process.)
6. On the TIBCO Installation Home dialog, select Use an existing TIBCO_HOME then choose the
appropriate TIBCO_HOME from the list.
For more information, see Installation Environment.
7. On the Installation Profile Selection dialog, do one of the following:
●
Select Typical installation profile from the left panel and click Next.
●
Check the Customize installation checkbox, select components to be installed from the panel
on the right and click Next.
At the next screen, specify whether you want to install the eclipse environment provided with the
product, or specify your own eclipse directory location and click Next.
8. Review the information on the Pre-Install Summary dialog, then click Install to start the installation
process.
If you want to change any of your choices, click Back to step back through the dialogs to the
appropriate point. You can then restart the installation process from that point.
TIBCO BusinessEvents® Views Installation
8
The installer now performs the necessary installation tasks.
9. You may be prompted to replace files already on disk that are newer than the installation files.
●
In the case of a fresh installation of the add-on over a prior fresh installation of a full installer
version of the add-on or of TIBCO BusinessEvents, such messages are harmless: overwrite all
existing files.
●
In the case of files you have changed: if you want to save settings in any existing files, first save
a backup of the files to a different name, and then replace the original files with the newly
installed files. After installation configure the newly installed files using information from the
prior version’s file backups, as needed.
10. When installation has completed, the installer deletes the temporary files as a post installation task
and then the Post Install Summary dialog displays. Click Finish to exit from the installer.
Installing in Console Mode
In console mode, the TIBCO Universal Installer is run from a command line.
Procedure
1. Open the physical media or download the software package from http://www.download.tibco.com.
For downloading you will need your username and password. If you did not receive a username
and password, contact TIBCO Technical Support.
2. Extract the contents of the package to a temporary directory.
3. Using a command line, navigate to the temporary directory to which you extracted the installation
package.
4. Run the installer using this command line:
●
Microsoft Windows: TIBCOUniversalInstaller.cmd
●
Linux: ./TIBCOUniversalInstaller-platform_acronym.bin
-console
-console
5. Respond to the messages on the command line.
You may want to refer to Installing in GUI Mode for information about responding to the messages.
6. When the installation completes, press Enter to exit the installer.
Installing in Silent Mode
In the silent mode, you can run the installer without user input by pointing the installer to an existing
response file, which contains installation parameters.
A default response file is included with the product. Edit the file in a text editor and provide all nondefault values as needed before launching the silent installation. For example, ensure that the
installationRoot and createNewEnvironment attributes are set correctly. The default response file
has the name:
TIBCOUniversalInstaller.silent
The best practice is to make a copy of the default response file, then edit that file and use it for the
installation.
If you invoke the Universal Installer with only the -silent argument, the installer reads the input from
default response file.
If you make a copy of the default response file, and rename it, you must provide the name of the
response file when invoking the Universal Installer. This done by passing the following arguments on
the command line:
TIBCO BusinessEvents® Views Installation
9
-silent -V responseFile="filename.silent"
where, filename is the name you gave the response file.
Procedure
1. Open the physical media or download the software package from http://www.download.tibco.com.
For downloading you will need your username and password. If you did not receive a username
and password, contact TIBCO Technical Support.
2. Extract the contents of the package to a temporary directory.
3. Navigate to the temporary directory to which you extracted the installation package.
4. Make a copy of the default response file, open the copy with a text editor, then update the
parameters as needed.
The response file contains comments that describe each of the parameters. You can save the file using
any desired name.
5. Enter the following command to start the installation (these assume you have copied the response
file and saved it as MyResponseFile.silent):
●
Microsoft Windows: TIBCOUniversalInstaller.cmd
-silent -
VresponseFile="MyResponseFile.silent"
●
Linux: TIBCOUniversalInstaller-platform_acronym.bin
-silent -
VresponseFile="MyResponseFile.silent"
If you copy the response file to another directory, not the temporary directory
containing the installer, you need to provide the absolute path of the response file.
A line like similar to the following is written to the installer log file when installation
completes:
The installation has completed. Please check the log file for additional
information.
TIBCO BusinessEvents® Views Installation
10
Uninstalling the Software
The TIBCO Universal Installer is used to uninstall TIBCO products. You can uninstall in either GUI
mode or console mode.
In the case of a service pack release, this procedure uninstalls the entire product, not just the service
pack. It is not possible to uninstall only a service pack.
Uninstall in GUI Mode
Using the TIBCO Universal Installer, you can uninstall all products in a particular TIBCO_HOME, or
you can uninstall specific products that have been installed in a TIBCO_HOME.
Procedure
1. Run the universal uninstaller in one of the following ways:
●
Navigate to the TIBCO_HOME/tools/universal_installer directory and run the
TIBCOUniversalInstaller program.
●
(Windows) From the Start menu, go to Start > All Programs > TIBCO > TIBCO_HOME >
Universal Uninstaller.
2. Select the Uninstall Products from a TIBCO Home Location option.
3. In the TIBCO Home Location field, select the TIBCO_HOME in which the product is installed, then
click Next.
4. On the Welcome dialog, click Next.
5. On the Uninstallation Type dialog, do one of the following:
●
To uninstall just this add-on (or any specific TIBCO products in this TIBCO_HOME), click
Custom Uninstall. Select the appropriate checkboxes, then click Next.
●
To uninstall all TIBCO products that were installed using the universal installer, click Typical
Uninstall, then click Next.
The Pre-Uninstall Summary dialog appears.
6. Review the products to be uninstalled, then click Uninstall.
7. To remove modified files, click Yes to All.
8. On the Post Uninstall Summary dialog, click Finish to exit the uninstall wizard.
9. If you have uninstalled all the software in TIBCO_HOME, delete the folders in the installation
environment and user home.
Uninstall in Console Mode
Uninstalling in console mode allows you to uninstall from the command line.
Procedure
1. Open a command line, navigate to the directory:
TIBCO_HOME/tools/universal_installer
2. Run the TIBCOUniversalInstaller in console mode using the command:
TIBCOUniversalInstaller -console
TIBCO BusinessEvents® Views Installation
11
3. Respond to the prompts on the command line
4. When the uninstallation completes, press Enter to exit the Universal Installer.
Uninstalling in Silent Mode
Uninstalling in silent mode allows you to uninstall without user inputs by pointing to a response file.
For unistallation, you need to create a response (.silent) file with the needed uninstallation
parameters. You can use the .SILENT file provided with the installation package as a template.
Use the -silent command for performing the silent uninstallation. Pass the absolute path of the
response file as an argument if the response file is not located in the same folder as
TIBCOUniversalInstaller.
Prerequisites
A .SILENT file should exist with values for atleast the following attributes:
●
uninstallProductID
●
uninstallProductVersion
●
uninstallTIBCOHome
Procedure
1. Open a command line, navigate to the directory:
TIBCO_HOME/tools/universal_installer
2. Run the TIBCOUniversalInstaller in silent mode using the following command based on the
response file location:
Response File Location
Silent Uninstallation Command
TIBCO_HOME/tools/
TIBCOUniversalInstaller -silent
universal_installer
Other
TIBCOUniversalInstaller -silent -V
responseFile="<absolute_path_and_file_name>"
Sample Response File
The following sample content of the Uninstall.silent file removes all products from the
specified TIBCO_HOME: C:\BE\BE520.
<?xml version="1.0"?>
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
<properties>
<comment>---Universal Installer Silent Installation Properties---</comment>
<entry key="uninstallProductID">*</entry>
<entry key="uninstallProductVersion">*</entry>
<entry key="uninstallTIBCOHome">C:\BE\BE520</entry>
</properties>
TIBCO BusinessEvents® Views Installation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising