Maximal55FE Expandable Power System Overview

Maximal55FE Expandable Power System Overview
Maximal55FE
Expandable Power System
Rev. DSMaximal55FE_05192015
Overview
Maximal55FE Expandable Power System provides system designers and installers
with optimum ­­­power choices and the highest levels of versatility. It provides 12VDC
via two (2) single output power supply/chargers. System includes AC fail, low battery
and battery presence monitoring. Enclosure facilitates up to four (4) 12VDC/12AH
batteries. All interconnecting equipment must be UL Listed.
Maximal55FE
Input:
• 120VAC 60Hz, 7.0 amp input.
Specifications
Supervision (cont’d):
• Low power shutdown. Prevents deep battery discharge.
Output:
• 12VDC outputs.
• Maximum output current:
Options P/S 1
P/S 2
A
12VDC @ 10 amp 12VDC @ 10 amp
• Non power-limited outputs.
• Aux. power-limited output rated @ 1 amp (unswitched).
• Overvoltage protection.
Fuse Ratings:
• Power Supply input fuse rated @ 5 amp/250V.
Fire Alarm Disconnect:
• Supervised Fire Alarm disconnect (latching or
non-latching) 10K EOL resistor. Operates on a
normally open (NO) or normally closed (NC) trigger.
Supervision:
• AC fail supervision (form “C” contacts).
- Notification trigger is selectable for
30 seconds (factory set) or 2 hours.
• Battery fail & presence supervision (form “C” contacts).
Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Maximum charge current 1.54 amp.
• Automatic switch over to stand-by battery when AC fails.
• Battery fuses rated @ 15A/32V.
Visual Indicators:
• Green AC Power LED indicates 120VAC present.
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• BTU/Hr.: 122.84 BTU/Hr.
• System AC input VA requirement: 840VA.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm)
• Enclosure accommodates up to four (4) 12AH batteries.
• Product weight (approx.): 32.0 lbs. (14.55 kg).
• Shipping weight (approx.): 39.15 lbs. (17.75 kg).
Optional Field Installable UL Listed Sub Assembly Modules
Power Supply
Power Supply
Stand-by
Battery
Stand-by
Battery
(optional)
(optional)
Stand-by
Battery
Stand-by
Battery
(optional)
(optional)
A
Location A - ACM4, ACM4CB, MOM5, PD4UL, PD4ULCB,
PD8UL, PD8ULCB, PD16W & PD16WCB.
B
Location B - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,
PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.
C
Location C - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,
PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.
Agency Approvals
UL Listed for Access Control System Units
(UL 294).
CSFM
California State Fire Marshal Approved.
Altronix Corp.
140 58th St. Brooklyn, NY
ULC-S319-05 - Electronic Access
Control Systems Class I equipment. CSA
C22.2 No.205 - Signal Equipment.
Enclosure Dimensions (H x W x D approximate):
26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm)
19”
(482.6mm)
2”
(50.8mm)
4”
(101.6mm)
4”
(101.6mm)
7”
(177.8mm)
2”
(50.8mm)
6.25”
(158.75mm)
TOP
1.25”
(31.75mm)
0.85”
(21.59mm)
19”
(482.6mm)
8.9”
(226.06mm)
1.25”
(31.75mm)
0.85”
(21.59mm)
8.4”
(213.36mm)
1.5”
(38.1mm)
1.5”
(38.1mm)
1.5”
(38.1mm)
5”
(127mm)
8.5”
(215.9mm)
7”
(177.8mm)
7.5”
(190.5mm)
7.5”
(190.5mm)
26”
(660.4mm)
8.5”
(215.9mm)
26”
(660.4mm)
26”
(660.4mm)
LEFT
RIGHT
7”
(177.8mm)
10”
(254mm)
1”
(25.4mm)
1”
(25.4mm)
2”
(50.8mm)
0.85”
(21.59mm)
8.9”
(226.06mm)
8.4”
(213.36mm)
0.85”
(21.59mm)
BOTTOM
19”
(482.6mm)
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
6.25”
(158.75mm)
4”
(101.6mm)
2”
(50.8mm)
1.25”
(31.75mm)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising