2x10 HDMI Splitter Operation Manual CHDMI-210T
2x10 HDMI
Splitter
Operation Manual
CHDMI-210T
1. Introduction
Cypress CHDMI-210T is a high performance 2 input-10 output HDMI splitter
with separate optical audio and remote control. It allows you to connect up to
2 HDMI source and 10 HDMI displays. The 10 HDMI outputs are identical.
2. Features
1. Two HDMI sources to connect up to 10 HDMI displays simultaneously
2. HDCP keysets allows each output to work independently when connecting
to a HDMI display.
3. Splits a HDMI source up to 10 outputs without signal loss.
4. Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable.
5. Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480p to 1080p. Maximum resolution bandwidth 165MHz.
6. Can be cascaded for more outputs
7. Each of the buffered output can run up to 20 Meters @1600x1200.
8. Support multi channel audio.
9. Full HDCP Compliant.
10. Separate toslink output.
3. Operation Controls and Functions
Front Panel
OPTICAL
INT
HDMI
1
2
HDCP HDMI/DVI
HDMI 1
HDMI 2
KEY LOCK
SYNC
CHDMI-210T 2x10 HDMI SPLITTER
AUDIO IN
HDMI IN
POWER
1
2
3
4 5 6 7 8
1. Remote Control Sensor.
2. AUDIO IN Select/Indicator:
Press the "AUDIO IN" button sequentially to switch to your desired input
audio source (HDMI, OPTICAL 1 and OPTICAL 2), the LED will illuminate to
indicate which input source is selected.
3. HDMI IN Select/Indicator:
Press the "HDMI IN" button sequentially to switch to your desired input
audio/video source (HDMI 1 and HDMI 2), the LED will illuminate to indicate
which input source is selected.
4. HDCP Indicator:
The LED will illuminate when the selected HDMI input source is HDCP-protected.
5. HDMI/DVI Indicator: The LED will illuminate when the selected HDMI input
source is originally from an HDMI output, the LED will not illuminate when the
selected HDMI input source is originally from a DVI output.
6. SYNC Indicator:
The LED will illuminate when the selected HDMI IN connects to an HDMI
or DVI output correctly.
7. Key Lock:
Press and hold the "POWER" button for 5 seconds will enter the Key Lock mode,
Key Lock LED will illuminate and all buttons will not function.
Press and hold the "POWER" button for 5 seconds again to disable the Key Lock mode.
8. POWER Switch/Indicator:
Press the "POWER" button to turn on/off the power, the LED will illuminate when
the power is turned on.
3. Operation Controls and Functions
Real Cable
OPTICAL
IN
1
EDID
HDMI IN
1
STD
2
OPTICAL
OUT
1
HDMI IN
HDMI OUT
2
RS232
2
DC 5V
HDMI OUT
1
HDMI OUT
2
HDMI OUT
3
HDMI OUT
4
HDMI OUT
5
HDMI OUT
6
HDMI OUT
7
HDMI OUT
8
HDMI OUT
9
10
TV
1
2
3
4
5
6
7
1. EDID Control Jumper:
Default factory setting is TV, leave as is if the display is properly. Switch to
STD if the display has problems.
2. HDMI Inputs 1 and 2:
Connect each of the input ports to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
3. OPTICAL inputs 1 and 2:
Connect each of the input ports to the audio output of your source
equipment such as DVD player or amplifier, using Toslink (optical fiber) cable.
4. OPTICAL Outputs 1 and 2: Connect each of the output ports to the audio
equipment such as amplifier using Toslink (optical fiber) cable. When both
connected, the OPTICAL outputs 1 and 2 play identical audio signal
simultaneously.
5. RS232:
9-pin D-Sub connector for connecting to your PC or other control console
for remote control.
6. HDMI Outputs 1 to 10:
Connect each of the output ports to the HDMI display. When more than
one output connected, the HDMI outputs play identical audio/video signal
simultaneously.
7. Power:
Plug the 5V DC power supply into the CHDMI-210T and connect the
adaptor to AC wall outlet.
4. Remote Control
1. POWER:
Press the button to turn on/off the unit.
2. Input Select for HDMI:
Press "1" button to switch the HDMI input
between HDMI IN 1 and HDMI IN 2.
3. Input Select for AUDIO:
Press "2" button to select HDMI INT
audio input, press "3" button to select
OPTICAL 1 input, and press "4" button to
select OPTICAL 2 input.
1
3
2
5. Specifications
- Frequency bandwidth: 1.65Gbps(single link)
- Inputs: - 2x HDMI female ports (Type A connector)
- 2x Optical audio input
- Output: - 10 x HDMI female port (signal link)
- 2 x Optical audio output
- Power: 5VDC universal power supply
6. Connection and Installation
Amplifier
Amplifier
DVD
PC
Amplifier
Toslink
Cable
Toslink
Cable
Toslink
Cable
Toslink
Cable
DVI to
HDMI
Cable
HDMI
OPTICAL
IN
1
EDID
2
1
STD
OPTICAL
OUT
1
HDMI IN
HDMI IN
HDMI OUT
2
RS232
2
DC 5V
HDMI OUT
1
HDMI OUT
2
HDMI OUT
3
HDMI OUT
4
HDMI OUT
5
HDMI OUT
6
HDMI OUT
7
HDMI OUT
8
HDMI OUT
9
TV
HDMI
HDMI
HDMI
Cable
HDMI
Cable
HDMI
HDMI
DVD or Set-Top-Box
or
HDTV
or
HDMI display
LCD TV
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising