Manual 12671554

Manual 12671554
3 3/8"
11/16"
0.89"
0.147"
2.22"
7/8" dia
11 1/2"
3/8" dia 3
1 3/8" dia
See Notes 4 & 5.
1.55"
1.28"
Horizontal
centerline
of exit device
and trim
Vertical
centerline
of exit device
and trim
2 7/64"
Backset
See Note 3.
RHRB door edge
Backset
See Note 3.
LHRB door edge
1 1/8"
1 5/16"
3/8" dia
Notes
3 19/64"
1 Also see the G08 Template — Installation Template
for EXG, EXBV, and EXZ Exit Hardware Trim for Use
with Precision Hardware 1000/2000 Series Exit Devices.
2 Allow plus tolerance for clearance per ANSI A115.5.
The general tolerance is ± 1/64″.
3 Use the Precision Hardware 1000/2000 Series Lock
installation instructions for backset dimensions.
4 Drill only for EV functions, which require a cylinder.
5 For rim and vertical rod devices, drill this hole through
the door; for mortise devices, drill this hole from the
outside into the mortise cavity only.
6 Other mounting height requirements may apply.
1 1/2"
39 15/16"
Finished floor
See also Note 6.
1.55"
Exit Hardware Trim Escutcheon
Title
Installation Specification for EXG, EXBV, and EXZ Exit Hardware Trim for
Use with Precision Hardware 1000/2000 Series Locks
Series
EXG, EXBV,
EXZ
Backset
See note 3
Trim style
DV, MS, PM,
PH, SC, KP
Door thickness
1 3/4″–2 1/4″
BEST ACCESS SYSTEMS
Rev date
03/2003
Template
number
G10
Rev
B
T61827/Rev B 1846564 ER-7991-1 Mar 2002
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising