Mark-10 MESURgauge software specs

Mark-10 MESURgauge software specs
Data Sheet
MESURTMgauge & MESURTMgauge Plus Software
32-1088 REV 3
Page 1 of 4
MESURTMgauge and MESURTMgauge Plus expand the
functionality of force and torque measuring instruments
and test stands. Both programs share the ability to capture and display data in graphical format for load vs. time
or load vs. travel vs. time. MESURTMgauge Plus adds the
ability to control the motion of Mark-10 motorized test
stands, coordinating motion control and data acquisition.
The programs include a set of tools to analyze test results, including statistical calculations, quick data export
to Microsoft Excel, customizable reports, pass/fail indicators, and many others. Test setups are customizable
and can be saved and recalled. The user can program test start and stop conditions, including load, time,
distance, and sample break. Additional features include a large display screen for real time load and travel
data and a utility to configure Mark-10 gauges from a PC.
Built-in simulated data generation allows MESURTMgauge or MESURTMgauge Plus to be evaluated without
an instrument.
Features
 Acquire continuous or single-point data from force and torque measuring instruments and test stands.
 MESURTMgauge Plus starts and stops models ESM303, ESM303H, and ESM1500 motorized test stands,
coordinating motion control and data collection with just one click.








Real time tabular and graphical data acquisition of load vs. time or load vs. travel vs. time.
Configurable start and stop test triggers (time, load, number of samples, or distance).
Statistical calculations of acquired data. Automatically recalculates for custom data ranges.
One-click export to Excel.
Customize test setups for future recall.
Customize reports and report templates.
Configure Mark-10 gauges and indicators through a simple interface.
View real time data on a large simulated instrument display.
Mark-10 Corporation  www.mark-10.com  info@mark-10.com
Toll-free: 888-MARK-TEN  Tel: 631-842-9200  Fax: 631-842-9201
Specifications subject to change without prior notice
Data Sheet
MESURTMgauge & MESURTMgauge Plus Software
32-1088 REV 3
Page 2 of 4
Start and stop data collection, and view real time data in
graphical and tabular formats.
With MESURTMgauge Plus, the START button also
initiates the motion of an ESM303, ESM303H, or ESM1500
motorized test stand*, consolidating complete test control
into just one click.
Configure test start and stop conditions.
With MESURTMgauge Plus, set the initial test stand
crosshead direction upon starting the test.
Sophisticated analysis tools include an x-y
cursor, statistical calculations with automatic
re-calculation for a customizable data range,
export to Excel, and more.
High and low limit indicators help differentiate
between an acceptable sample and a reject.
* Minimum supported firmware versions: ESM303: 2.02.04 front / 2.02.04 main. ESM1500: 2.02.02 front / 2.02.01 main. Firmware update may be done at the factory.
Mark-10 Corporation  www.mark-10.com  info@mark-10.com
Toll-free: 888-MARK-TEN  Tel: 631-842-9200  Fax: 631-842-9201
Specifications subject to change without prior notice
Data Sheet
MESURTMgauge & MESURTMgauge Plus Software
32-1088 REV 3
Page 3 of 4
View real time load and travel readings on an
enlarged simulated instrument display.
Mark-10 gauge / indicator settings can be
configured through a simple interface.
Mark-10 Corporation  www.mark-10.com  info@mark-10.com
Toll-free: 888-MARK-TEN  Tel: 631-842-9200  Fax: 631-842-9201
Specifications subject to change without prior notice
Data Sheet
MESURTMgauge & MESURTMgauge Plus Software
32-1088 REV 3
Page 4 of 4
Easily customize reports and report templates.
A typical report, containing customizable
information fields, statistics, graph,
raw data, and date and time.
Ordering Information
Part No.
Description
15-1004
MESURTMgauge software
15-1005
MESURTMgauge Plus software
15-1006
Upgrade, MESURTMgauge to MESURTMgauge Plus*
* Minimum required test stand controller firmware versions:
ESM303 / ESM303H: Front: 2.02.04, Main: 2.02.04
ESM1500: Front: 2.02.02, Main: 2.02.02
Firmware versions are displayed at power-up. Firmware update may be
done at our factory at no charge. Contact Mark-10 for details.
Hardware Requirements
 Windows XP or later operating system
 Minimum display resolution of 1108 x 758
 One or more USB or RS-232 ports
Mark-10 Corporation  www.mark-10.com  info@mark-10.com
Toll-free: 888-MARK-TEN  Tel: 631-842-9200  Fax: 631-842-9201
Specifications subject to change without prior notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising