CG_PixelPower%20Clarity5000%20(4999DR-067

CG_PixelPower%20Clarity5000%20(4999DR-067
PixelPower Clarity5000
• Use the BNC knob to select Input BNC.
• Use the CG knob to select the Clarity5000.
• Use the Channel knob to select the channel that you using on
the Clarity5000.
Requirements
• Character Generator Interface Software Option
3. Press HOME  Confirm.
• Ethernet Cable
To Set Up Alpha Inputs
Port Connections
Character
Generator
Switcher
Video
Input BNC
 Video Out BNC
Alpha
Input BNC
 Alpha Out BNC
Switcher Setup
To Set Up Communications
1. Press HOME  Setup  Installation  Com Setup 
Type.
• Use the Com Port knob to select the REMOTE X port that
you assigned the Clarity5000 to.
• Use the Device knob to select CG.
2. Press Select Device.
1. Press HOME  Setup  Installation  BNC  BNC
Type.
• Use the BNC knob to select the input BNC that the Alpha
output of the Clarity5000 is connected to.
• Use the Type knob to select Alpha.
• Use the Video Format knob to select the video format of the
Alpha output of the Clarity5000.
2. Press Alpha.
• Use the Mode knob to select Shaped.
3. Press Auto Key Setup.
• Use the BNC knob to select input BNC that the Video output
of the Clarity5000 is connected to.
• Use the Alpha knob to select that the Alpha output of the
Clarity5000 is connected to.
4. Press HOME  Confirm.
• Use the Device knob to select Pixel.
3. Press Com Type.
• Use the Type knob to select Network TCP.
4. Press Com Setting.
5. Use the Client/Server knob to select Client.
Device Setup
Use the following procedure to configure the Template Formatting
on the PixelPower Control Center:
1. From the PixelPower Control Center main toolbar, select
Options Automation Setup.
• In the Remote IP Address field, enter the IP address of the
Clarity5000.
2. Select the MOS Gateway 1 tab.
• In the Remote Port field, enter 10260. Use this value unless
told otherwise by the PixelPower Clarity5000 documentation.
4. In the Template Formatting field enter Page %N.
6. Press HOME  Confirm.
To Set Up Video Inputs
1. Press HOME  Setup  Installation  BNC  BNC
Type.
• Use the BNC knob to select the input BNC that the Video
output of the Clarity5000 is connected to.
• Use the Type knob to select CG.
• Use the Video Format knob to select the video format of the
Video output of the Clarity5000.
2. Press More  More  Still/CG Setup.
3. Locate the ActiveX MOS Object Item Slug field.
5. Click OK to save your changes and close the Automation Setup
dialog box.
When configuring your Clarity5000, keep the following in mind:
• The Socket Server Application will automatically launch the
Clarity Graphics Application.
Compatibility
Character Generator
Version
PixelPower Control Center Version
4.7.1.1
PixelPower Clarity Software Version
7.7.0.6
4999DR-067-06
Switchers
Synergy 1 SD
--
Synergy Series SD
--
Synergy MD/X
--
Vision MD/X
--
Vision QMD/X
16.0
Vision MultiPanel Support
--
Automation
OverDrive
12.0
Port Expanders
24
BSS4

Comtrol DeviceMaster

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising